I googled how to reset my phone back to factory settings and they gave me this link
"[STOCK ROM] Odin3 One-Click Downloader"
(cant link links)
i misread that it was for the captivate, and i went through with all the directions.
now my phone keeps flashing an AT&T bootscreen and i cant get it in recovery mode..
help?
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
nevermind, i found the Odin program for the samsung vibrant and re did it.. but i still have BOTH at&t boot screen at the tmobile vibrant boot screen.. anyone know how to get rid of that? it would be much appreciated thanks!
http://forum.xda-developers.com/showthread.php?t=741027
where did u find it.. please share..
Edit: NVM..
stepinmyworld said:
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
Click to expand...
Click to collapse
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Does not boot!
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
setzer715 said:
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Click to expand...
Click to collapse
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
stepinmyworld said:
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
Click to expand...
Click to collapse
I don't want your money, but if you PM me I will try to type up a detailed how to.
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Ok,
The_Chrome_Coyote really helped me!!!! Thank you so much and im back up and running. There was something missing from the original tutorial, not that we should be spoon fed but I didn't have the WinRAR program on my pc and didn't know I needed to extract anything. I was looking for exe. for it to be a program and just open it. It's a little more complicated than that. I added my additions in BOLD
The_Chrome_Coyote's Original post to me:
Odin isnt that hard, its just REALLY picky about working.
Firstly you need to download the Samsung drivers for your OS which can be found:
http://forum.xda-developers.com/showthread.php?t=728929
added:
Second you need to make sure you download WinRAR x86 (32 bit) 3.93 (google it and you should be able to get it) otherwise if your pc doesn't have a program to recognize rar and tar files, you are out of luck.
then read this thread from JAC:
http://forum.xda-developers.com/showthread.php?t=734475
1. Now, Extract ODIN from its .rar and place the .exe on your desktop
2. Extract the .pit file from its.rar and place that on your desktop
3. Place the JFD .tar file on your desktop but DO NOT EXTRACT
Now you can use ODIN
4. Start ODIN Odin3. [Android + SLP], through ODIN select the .pit file
5. Hit "PDA" button, and through ODIN select the .tar file
6. Plug your TURNED OFF PHONE into the USB cable
7. Wait for the Battery/ charging indicator to start
8. HOLD VOL UP+ VOL DOWN+ POWER, as soon as the screen goes black RELEASE POWER, and continue to HOLD VOL UP+ VOL DOWN Until it enters download mode. Which should happen quickly and looks like a men at work highway sign.
9. If a COM port has turned Yellow in ODIN, then the device has been recognized. If it hasnt, unplug and plug your phone back in.
10. Dont select any options other than whats set at default.
11. Hit Start and be patient, takes me maybe 5 minutes to get back up and running.
NOTE: If you do not see a blue progress bar on the phone's screen after a minute;
11a. Turn your phone off by pulling the battery.
11b. CLOSE ODIN
11c. Start at step 4 again.
ODIN needs to be open and ready to flash before the phone is plugged in, in my experience. Its very picking about this, and not everyone has this issue, but I did and following all these steps helped me flash my phone more times than I can count the other day haha.
Hope this helped! and your $20, donate it to Wes, JAC, or Eugene to keep them making great stuff for our phone.
Reply With Quote
Thank you thank you thank you
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
Same thing happened to mine when i tried odin. Now all i get sometime when it come on. are 7 rows of text that seems to be a code on screen in amber. Ishipped back 2 samsung. Since t-mobile won't take it after 14 days.
ok I screwed up guys.
I installed ROM manager from the market, flashed clockwork, it asked me if I wanted to partition and I said yes.
Now I just get a black screen at boot. I've managed to run odin and it says success. But I still just get a black screen after boot.
Little help?
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
daddysays said:
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
First: everyone was a noob at one time, so simmer down.
Second: Pleast post an update.zip that will make my phone work.
Cannot get past Galaxy S boot screen
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
jmoney1017 said:
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
Click to expand...
Click to collapse
If you can see the samsung logo you are fine. Load up recovery and try a full wipe first. If that fails then you can odin back to stock and root again.
Sent from my SGH-T959 using XDA App
1. If you have questions, there is a q and a forum for this device!!!!!!
2. THIS IS THE DEV PART OF THE FORUM. IE FOR DEVS POSTING STUFF FOR THE PHONE!!!!!
3. Learn how to Google. Not that hard. Example, you don't know what the *.rar extension is. GOOGLE IT!! Google knows everything.
4. If you don't have basic android or computer skills, don't try anything stupid. You do have a chance to brick your phone, even the pros like cyanogen have bricked their phones.
5. Don't offer cash for someone to fix your phone. Keep it in qna and some one will help you. Save your cash for the development that work hard on making these things work.
6. Can a mod please move this thread to qna.
7. THE MOST IMPORTANT THING. USE THE SEARCH FINCTION BUILT ONTO THE FORUMS. IT WILL SAVE YOU TIME AND THEN YOU WILL NOT LOOK LIKE NOOBS THAT JUST GOT THIS PHONE BECAUSE IT HAD AVITAR IN THE BOX!!!!!
Sent from my SGH-T959 using XDA App
cache.fs problem in odin
setzer715 said:
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Click to expand...
Click to collapse
I FOUND A SOLUTION TO THE CACHE.RFS PROBLEM!!
http://www.fractionalphones.com/?p=121
I am not sure what has happend but I am baffled. I had attempted to odin to ji6 and entered down load fine I could not get odin to continue after setting up connection. I cncled becaust there was no progross for it did not begin. No after exiting download mode my screen shows somthing I have never seen. A image of a phone with dots conneting to a warning sign and the dots to a pc image.
Any Ideas?
If you press menu or home or any other row keys, does the screen change? If not, odin stock JFD and try again. To enter download mode: remove battery, plug phone into PC, with one hand holding vol up and vol down, put battery back in. Then odin. Sorry if this is redundant...
Sent from my SGH-T959 using XDA App
belial20xx said:
I am not sure what has happend but I am baffled. I had attempted to odin to ji6 and entered down load fine I could not get odin to continue after setting up connection. I cncled becaust there was no progross for it did not begin. No after exiting download mode my screen shows somthing I have never seen. A image of a phone with dots conneting to a warning sign and the dots to a pc image.
Any Ideas?
Click to expand...
Click to collapse
Im not sure what happend to get you in that situation. I was in the same boat a while back and did some searching and came up with a solution.
Your phone isnt bricked but what you have to do is put your phone back in to "Download" mode.
To do this turn the phone all the way off with no cords attached to it. Take your USB cable and connect the USB end to the PC but leaving the phone end dissconected.
Next, on the phone with battery in and phone OFF, press and hold both Vol UP and Vol Down at the same time. While holding connect the other end of the USB cable to the phone (while holding down Vol UP+Down) Doing this will power up the phone straight to "Download Mode" *Green Android with a Shovel)*
In this mode the phone can be connected to odin to truble shoot it.
Good luck, dont forget to use the "Thanks" button if I was of any help
Thankyouthankyouthankyou
Thanks you for the quick reply. You are the man and I owe you my gratitude.
I was trying to flash to stock via odin and when i tried to go to download mode i got the phone ! Computer symbol. I've tried removing sim and pressin vol up and down and plugging in the cord. Not working. I'm really worried because i have used odin numerous times and this is the first time i have not been able to go to download mode. Can anyone please help me through this?
Open up odin and plug in your phone to the computer but Take out the battery first.. after its plugged in hold down volume up and down and power. Then while still holding the volume rockers and the power put the battery back in. Odin should then recognize your phone so you can flash back to stock.
Sent from Bionix powered vibrant! If I helped, hit the thanks button!
That has always worked for me. If not, install the Android SDK and use adb to run "adb restart download" (without quotes.) There are tons of tutorials on how to do it online. Google is your friend
Sent from my SGH-T959 using XDA App
Hey everyone.
So the other day I got excited about the CM7. I was following the steps to install it. i made a mistake. after i flashed the kernel. i rebooted my phone now all i get is a screen with picture of phone with a yellow triangle attached to a pc.
The thing i've tried to do was
1.take out the battery
2. take out the sim(which was already taken out to be in my gs4g)
3.took sd card out.
4.plug usb into phone and computer
5.put battery in while hitting the vol +/- minus rocker and nothing happens.i have odin open when I( try this.
my computer just wont pick it up.
when I plug in my gs4g it picks it up right away.
I've spent all weekend working on this.
also i think they only way before hand for me to get into download/recovery was for me to use adb. could that be why I'm not getting any progress?
Thanks in advance. Also sorry if this question has been asked so many times..
Is your problem getting into download mode? Or is it that you get into download mode but Odin won't recognize the device?
If its the former, getting into download mode is a bit tricky in CM7, I've done it plenty of times though. This worked for me.
1. Unplug the usb cord.
2. Pull out the battery.
3. Plug usb cord in.
4. Hold down vol+ & vol- and power button
5. You will see the loading circle or whatever it's called, when the screen goes black let go of power button.
You should be in download mode now. Sometimes you won't get the loading screen and the phone'll just boot up, if so pull the batt and try again.
Cito11 said:
Is your problem getting into download mode? Or is it that you get into download mode but Odin won't recognize the device?
If its the former, getting into download mode is a bit tricky in CM7, I've done it plenty of times though. This worked for me.
1. Unplug the usb cord.
2. Pull out the battery.
3. Plug usb cord in.
4. Hold down vol+ & vol- and power button
5. You will see the loading circle or whatever it's called, when the screen goes black let go of power button.
You should be in download mode now. Sometimes you won't get the loading screen and the phone'll just boot up, if so pull the batt and try again.
Click to expand...
Click to collapse
I've done that many times. I've tried for several hours during the weekend. Also CM7 is not installed yet. was in the middle of installing then this happend.
just open odin and plug your phone in to your pc and see if you get a COM port...if you do then flash it from there..
jmcghee1973 said:
just open odin and plug your phone in to your pc and see if you get a COM port...if you do then flash it from there..
Click to expand...
Click to collapse
not getting that at all no com ports show up.. I'm going to try this on a different computer.
When I get the black screen with that icon in the middle and I plug it in, Odin recognizes it right away. Furthermore, I've only gotten it before when I go into download mode(yellow sign + android sweeping) and Odin doesn't recognize my phone and I pull the battery then turn it back on.
Get odin up usb cord connected to the computer but not the phone
Remove the sim card the sd card and the battery and do the vol up and down boot. Then while holding the vol buttons down at the same time plug in the usb.
That should get you back to recovery.
READ the STICKY for NOOBS......... S15274N did a wonderful job of explaining all the methods on how to get into recovery from a soft brick
good luck
oka1 said:
Get odin up usb cord connected to the computer but not the phone
Remove the sim card the sd card and the battery and do the vol up and down boot. Then while holding the vol buttons down at the same time plug in the usb.
That should get you back to recovery.
READ the STICKY for NOOBS......... S15274N did a wonderful job of explaining all the methods on how to get into recovery from a soft brick
good luck
Click to expand...
Click to collapse
I've been trying all of those methods. Before this happened the only way for me to get into download was using adb reboot download command in adb.
The computer does not recognize in odin. I've tired this on two computers now.
I have all the drivers installed. i uninstalled ed reinstalled etc. used two different usb cables etc.
not sure what else to try. other than a baseball bat....
so i looked around and i bought a jig on ebay from skisky1. hopefully it will be here soon . to try this out .
so i was reflashing to cm7 #71 last night and i always do a clean install by formating boot system and cache. after i formated the 3 idk why but i let the phone shut off.
now i am stuck at just the vibrant logo. i have tried getting into cwm and download mode with no success. i plugged it in to the computer to see if i can at least access to adb no help there either.
does any body have a solution to this on this?
Um, first question; why do you format /boot? No where in any directions do they tell you to format that as that's where you're kernel is located.
And, if you can't access dl mode with the hardware buttons, why didn't you headed the large red letters telling you not to use CM7 if you can't access dl mode without the hardware buttons?
Have.you tried vol+ vol- and then USB? If you're running gb bootloaders (which you shouldn't be), then I don't know the button combo.
But the only way to recover is by geting into dl mode and Odin back to jfd.
Sent from my SGH-T959 using XDA App
I always format/ boot. Its a cleaner install and have no problems going from multiple kernel changes. I could get into download using button combo before I flashed. Now I cant
avengethis1 said:
I always format/ boot. Its a cleaner install and have no problems going from multiple kernel changes. I could get into download using button combo before I flashed. Now I cant
Click to expand...
Click to collapse
try this always works. take battery out phone, plug in usb to pc and phone hold vol + and -, and insert battery at same time, should put u in download mode.
Assuming u have a froyo bootloader
1) Power down ur phone
2) hold volume up + volume down then plug ur phone to a PC or laptop....don't let go of two volume buttons...
3) should b in download mode...
Sent from my MB860 using XDA App
ive tried every combo i can think of. still just sits at vibrant. was able to make a jig that put it into DLM but then was getting reconized at all by my computer even with all the correct drivers..... i think i actually might be outta luck
You could get a JIG which will automaticly put it into download mode. It can be found here http://www.amazon.com/gp/aw/d/B0053H73JQ/ref=redir_mdp_mobile/188-7446597-2980456
Sent from my SGH-T959 using XDA App
@halo
yea i was able to make one for 2 dollars and it works beautifully just now i cant get the computer to reconize the phone. i have the right drivers loaded but its seeing it as some crazy junk
edit: well got all the drivers working. made a new better jig and was able to get odin to reconize it.
didnt flash though. seemed jammed up. so i took it off of odin which left the phone in the phone to computer screen( PROGRESS) plugged it back into the computer. odin saw it and presto! back up and running on JFD
Ditto
I have done the same thing! Sent you a pm... Let me know what driver config you had to use to get it working.
Thanks!