Hi all,
Can anyone tell me what are ALL of their settings under the ##778# , I changed too many yesterday,
And now can only connect to rev a, I already changed back to ahrpd but no connection, I just need to know , under modem settings, from preferred mode and down.
Preferred mode....
Preferred mode (9k)
HDR preferred mode
HDR preferred mode (9k)
And the 1x diversity lines
These are the only ones I need
Again.. please help if you can
Sent by my ThumperBolt
Thunder Droid said:
Hi all,
Can anyone tell me what are ALL of their settings under the ##778# , I changed too many yesterday,
And now can only connect to rev a, I already changed back to ahrpd but no connection, I just need to know , under modem settings, from preferred mode and down.
Preferred mode....
Preferred mode (9k)
HDR preferred mode
HDR preferred mode (9k)
And the 1x diversity lines
These are the only ones I need
Again.. please help if you can
Sent by my ThumperBolt
Click to expand...
Click to collapse
Goto Market and download LTE OnOff app. run the program and select CDMA + LTE/EvDo Auto and hit Ping... This should put you back on the LTE network.
Los Angeles 4G is back.
I hope this help.
Are you rooted?? most roms right now have that built into the settings/wireless&networks/radio info
Yes I'm rooted, I have tried the LTE app, but they won't change these settings as they are deeper in the phone, and not Rom based, I changed them to get 3g yesterday when Verizon didn't pay their bill, and lost service, changed rev a to enable, but today changed it back to ahrpd, hit commit, and still only connected to CDMA Rev a, not ahrpd.
Sent by my ThumperBolt
Still cant figure out why i cant get ahrpd only rev a, even flashed a new radio! May have to do a factory reset
Sent by my ThumperBolt
Heres my modem settings:
slot cycle index - 2
perfered serving system - automatic
prefered mode - cdma only
prefered mode 9k - hdr lte only
hdr hybrid prefered - enable
hdr hybrid prefered 9k - enable
clear all mru entry - no
rev A - enable (or eHRDP)
1x diversity - disable
Sweet thanks alot!
Mod please close...
Sent by my ThumperBolt
I am not sure they have ehrpd running. I have been on settings on ehrpd since they fixed network and when I hit 3G it still says I'm connecting to rev. a
Yea I'm still sitting on rev a, thought it was a phone issue, but its a network thing, Verizon only paid half of their bill, just enough to have basic service without the FEATURES! lol......
Sent from my ThumperBolt using XDA Premium App
what does the ping do?
Related
How can I disable 3G and only use EDGE for Internet Connections?
Maybe it safes some battery as mine sucks like hell... even more than my (old) iPhone4 which I try to replace but I am not yet convinced by this phone and OS yet...
I havent found it too ..
on android phones its in main settings, wireless and networks, then hit the use 2g only checkbox.
Go to Settings/Wireless Network/Mobile Network/Network Mode/ Select GSM ONLY.
That will get you 2g data. Hit the thanks button if it helps.
gessi2000 said:
How can I disable 3G and only use EDGE for Internet Connections?
Maybe it safes some battery as mine sucks like hell... even more than my (old) iPhone4 which I try to replace but I am not yet convinced by this phone and OS yet...
Click to expand...
Click to collapse
Thanks!
I found this setting but thought this would disable all internet connection...
As stated in the title, the preferred network type for my phone changes from "CDMA + LTE/EvDo auto" to "CDMA auto (PRL)" on its own. This can be seen as follows:
1. Navigate to Wireless & networks --> Radio Info (or use LTE OnOFF app to access the Phone Information page)
2. Change "Set preferred network type" to "CDMA + LTE/EvDo auto"
3. Sometime later (like 10-15 mins), navigate back to Wireless & networks --> Radio Info (or use LTE OnOFF app to access the Phone Information page) and "Set preferred network type" will be now set to "CDMA auto (PRL)"
I am currently using the Synergy ROM (r259) based off of the 2.11.605.0 leak with the 1.48.00.0817r and 0.001.78.0802w_3 CDMA and LTE radios. I am also in a 3G only area.
So, my questions are:
1. Is this supposed to happen? In other words, is the phone switching to "CDMA auto (PRL)" on its own because I am in a 3G only area?
2. If not, how can this be fixed?
Any help would be much appreciated.
I've been having the same issue. I was in a 4g area and it would show it bit then go back to 3g . Radio info showed it went to a different setting on its own.
Sent from my synergy thunderbolt using xda app.
dfurr88 said:
I've been having the same issue. I was in a 4g area and it would show it bit then go back to 3g . Radio info showed it went to a different setting on its own.
Sent from my synergy thunderbolt using xda app.
Click to expand...
Click to collapse
So, it seems that this issue is Synergy related. I tried other Sense 3.0 Gingerbread ROMs based off of 2.11.605.0 (e.g. BAMF Forever 1.0.6) with the radio I was using with Synergy and this issue does not occur (it stays locked onto the setting I set it to).
TallSteve said:
So, it seems that this issue is Synergy related. I tried other Sense 3.0 Gingerbread ROMs based off of 2.11.605.0 (e.g. BAMF Forever 1.0.6) with the radio I was using with Synergy and this issue does not occur (it stays locked onto the setting I set it to).
Click to expand...
Click to collapse
I can confirm that its not just Synergy roms.I'm running SHIFTS3NS3 theory Rom its also 3.0 Sense based running the same radio as Steve and I've noticed the same change.
I'm about to flash the latest radios to see if it fixes it.will report in the morning
Sent from my SHIFTS3NS3 using xda premium
Motorola Razr HD CyanogenMod 11 (epinter) 4.4.2 presenting same issue
Same issue here. I also noticed that the phone briefly loose signal, stays with no signal for like 5 seconds, goes on with 3G and then the setting under "preferred network" switches to 3G briefly after that.
Also noticed that switching to 4G makes no effect, and if you goes out of the settings screen and gets back on it, you see "3G". If I switch to 2G, then 4G followed by a reboot it works fine for a while on 4G, then, suddenly (and I couldn't find a pattern), the symptom occurs.
Hey im trying to switch between HSPA and GSM but i dont even have the network mode setting on my phone for some reason i dont know what happened to it and it would really come in handy right now so if you know why or how to get it back could you please help me out?
GuddaCorey said:
Hey im trying to switch between HSPA and GSM but i dont even have the network mode setting on my phone for some reason i dont know what happened to it and it would really come in handy right now so if you know why or how to get it back could you please help me out?
Click to expand...
Click to collapse
Usually it's in the settings > wireless and networks
In there, on some roms it appears in some "more.." option within the section, then "mobile networks"
But on some roms it appears just as "mobile networks" and to switch to 2g should be there..?
Some confuse it with the section named "data usage"
You have not specified which rom(gb, ics?) you are using hehe but i hope that helps.. i dont remember the wireless and networks setting being any different or be missing on any rom at all, it's always the first option in the settings.
The phones are restricted by the modem so they are on automatic. You can turn data off but cannot switch modes.
Since I can't post in the development forum, I figured I'd post here and see if someone can relay it to the official Droid Razr CM10.1 thread.
Flashed RC4 today and enabled the LTE quick settings tile. Turning off LTE works fine as it just sets the network mode to CDMA/EvDo. However, turning it back on is an issue. The default LTE mode is Global, which is LTE/CDMA and the Droid Razr uses the LTE/CDMA/EvDo configuration when LTE is enabled. This means the LTE quick settings toggle isn't actually turning on LTE, so it stays in 3G mode.
I dug around in the CM10.1 codebase and found this method which eventually gets called when the tile is toggled.
github.com/CyanogenMod/android_packages_apps_Phone/blob/cm-10.1/src/com/android/phone/PhoneInterfaceManager.java (ctrl-f toggleLTE)
In order to get the Droid Razr to correctly turn on LTE, we need to set
ro.config.qc_lte_network_modes = true
in the system.prop file in "github.com/CyanogenMod/android_device_motorola_spyder/blob/cm-10.1/system.prop"
I don't know if this has any other repercussions, and I'm not set up to do cyanogenmod development so I can't verify that this will work, but I figured somebody else who knows more about the code base might have the answer.
I'm having this issue as well. Any known fix for the tile? I can flip 4g back in by changing the network mode option in settings.
I tried posting an answer in the beanstalk thread but got denied as I am a new member.
I had issues connecting to 4G using the Beanstalk 4.4.285 Uber kernel where I could not get LTE and when I went into mobile settings and clicked network type the only option I would see is 3G or 2G. If you have this issue as well (I noticed others have) I have posted a simple solution below.
I did two things to fix this issue in the phone settings.
1. Get into phone settings by typing "*#*#4636#*#*".
2. Click phone settings and change the network type near the bottom (mine was set to WCDMA Only) to the network type you prefer (I changed mine to LTE/GSM/CDMA AUTO).
3. I doubt this last thing is necessary but I changed it anyways which is click the menu items in the top right corner. Click select band and change it from auto to your band type (in my case it is USA).
Hope this helps!
JSin05 said:
I tried posting an answer in the beanstalk thread but got denied as I am a new member.
I had issues connecting to 4G using the Beanstalk 4.4.285 Uber kernel where I could not get LTE and when I went into mobile settings and clicked network type the only option I would see is 3G or 2G. If you have this issue as well (I noticed others have) I have posted a simple solution below.
I did two things to fix this issue in the phone settings.
1. Get into phone settings by typing "*#*#4636#*#*".
2. Click phone settings and change the network type near the bottom (mine was set to WCDMA Only) to the network type you prefer (I changed mine to LTE/GSM/CDMA AUTO).
3. I doubt this last thing is necessary but I changed it anyways which is click the menu items in the top right corner. Click select band and change it from auto to your band type (in my case it is USA).
Hope this helps!
Click to expand...
Click to collapse
Galaxy S 4G doesn't support LTE, it basically has HSDPA and HSDPA+ the best setting is to have it set on auto gsm/wcdma. You may want to update the apn since i think the default runs on metropcs apn. Beanstalk 4.4.4 will be out within the next few days. Check this url to look for roms from me:
thinkotbs dot com slash tombell
I compiled slimkat, which is also on that site.... which credits go to DJL for whipping that up. any suggestions i may be making carbon rom too.
err my bad i thought this was sgh-t959v forum
thomasbell said:
Galaxy S 4G doesn't support LTE, it basically has HSDPA and HSDPA+ the best setting is to have it set on auto gsm/wcdma. You may want to update the apn since i think the default runs on metropcs apn. Beanstalk 4.4.4 will be out within the next few days. Check this url to look for roms from me:
thinkotbs dot com slash tombell
I compiled slimkat, which is also on that site.... which credits go to DJL for whipping that up. any suggestions i may be making carbon rom too.
err my bad i thought this was sgh-t959v forum
Click to expand...
Click to collapse
your link deosn't work.
beenkenobee said:
your link deosn't work.
Click to expand...
Click to collapse
http://thinkotbs.com/tombell