These are actually two questions for when 1.8.3 comes out, taking into account that once installed you cannot downgrade to 1.2.6 or 1.5.7.
1. Is there a reliable 1.5.7 SBF out there? What happens when I soft-brick my phone and need to run RSDLite? I know I can install 1.2.6 but I won't be able to update unless from System Update I download in which case I'll get 1.8.3 for good.
2. What if I decided to upgrade 1.8.3. How will I be able to reflash using RSDLite? Is my only choice to wait until someone comes up with a leaked 1.8.3 SBF?
Thanks
1.8.3 sbf is already out there
if you flash back to the sbf do you lose all your root priviliges?
Yes but just use gingerbreak to re-root. You need an external sd, easy as pie.
Sent from my MB860 using XDA App
Related
I have a 1.5.7 version rooted and webtop modded, I'd followed the tutorial to undo the webtop but seens that the root stuff is not allowing the update to run sucessfully cause I'm getting the exclamation (!) error.
Anyone have Any hint on how can I undo the root thing or where to find the tutorial to set my phone to stock again?
Sent from my MB860 using XDA App
http://forum.xda-developers.com/showthread.php?t=1056779
Either flash the sbf 1.8.3 or the 1.57. But from what ive read they have pulled the 1.8.3, so i would just wait for it to go public over the air then flash 1.5.7 and update then root.
Thanks for the responses ! Do you guys know where the SBF for 1.57 is located? I will do a search right now but I was just wondering if I have an option to undo the root stuff to try the OTA update...
tyvm.
unroot with this thread
http://forum.xda-developers.com/showthread.php?t=1016060
Issue solved
Thank you all that helped me.. I could go to 1.83 by SBF my phone to version 1.2.6 then followed the GladRoot script and now I am 1.83 rooted
Thanks for the support guys.
I am currently on 1.5.7 rooted with GB 2.0 and i am wanting to go ahead and get the 1.8.3 ota update. So i can run gingerblur 3.0. I am very unclear on what i need to do do i need to flash a fresh 1.8.3 sbf or what.
Just curious if the 1.83 OTA update enacts the journaling where it won't allow you to flash back to 1.26 or 1.57. Has it been confirmed whether 1.83 OTA allows or restricts reverting to previous firmwares?
cerps said:
Just curious if the 1.83 OTA update enacts the journaling where it won't allow you to flash back to 1.26 or 1.57. Has it been confirmed whether 1.83 OTA allows or restricts reverting to previous firmwares?
Click to expand...
Click to collapse
I have successfully gone from 1.83 SBF ginger 3.0 gingerbroke, back to 1.2.6 then OTA to 1.57 and OTA 1.83, I have done this 3 times already with no consequences or issues. Currently on 1.83, Gingerbreak, Tether etc. All is well. I have used both the RSD method using provided links before official release of 1.83, as well as the current OTA. I just can stop playing with this phone lol.
This is exactly what I was wondering. I remember reading, pre-1.83 release that you would not be able to flash back to stock once the 1.83 update had been applied due to the firmware journaling that the 1.83 put in place. I've been reluctant to upgrade to 1.83 for that very reason. Are there others out there who have successfully 1.26 sbf flashed a 1.83 version phone?
jimbush3 said:
This is exactly what I was wondering. I remember reading, pre-1.83 release that you would not be able to flash back to stock once the 1.83 update had been applied due to the firmware journaling that the 1.83 put in place. I've been reluctant to upgrade to 1.83 for that very reason. Are there others out there who have successfully 1.26 sbf flashed a 1.83 version phone?
Click to expand...
Click to collapse
Im not sure If anyone has had any issues, but i scour this forum daily while at work lol, and im pretty sure if it was an issue it would be on the top of every Atrix thread. I have flashed back to 1.26 from 1.83 3 times. I wanted to see if the official OTA ran any different from the SBF that went live on the 29th because i couldn't find an answer so i took the risk and tried it. First try worked perfectly. I then went back to SBF 1.83 to test again to see if anything was different. Far as i could tell the OTA official release seems to scroll menus better and just seems to be a little more fluid. I STRESS!!! I DO NOT have technical data to back this up, Just my opinion. I dont want start a snowball effect of people flashing there device back to stock thinking OTA 1.83 is better lol.
jimbush3 said:
This is exactly what I was wondering. I remember reading, pre-1.83 release that you would not be able to flash back to stock once the 1.83 update had been applied due to the firmware journaling that the 1.83 put in place. I've been reluctant to upgrade to 1.83 for that very reason. Are there others out there who have successfully 1.26 sbf flashed a 1.83 version phone?
Click to expand...
Click to collapse
I flashed back to 1.26 from 1.83 successfully last night. I then OTA'd my way back to 1.83. (One thing, however, after my phone installed the 1.57 OTA, it wouldn't boot back up. It just said failed to boot and went to RSD mode. I then flashed the 1.57 sbf and that went well. I then OTA'd to 1.83 and all is well)
sent from my Atrix
Does it make a difference if I do a factory reset or flash 1.83 sbf with rsd lite 5.0? I am currently rooted on 1.83 gingerblur 3.5 and wanted to try and clean up some issues and start from scratch. Also is there a full 1.83 sbf to use or is it just an update. After the factory reset or flash I do plan to re-root with gingerbreak and re-install gingerblur 4.5. Any suggestions on which method is preferred is appreciated.
Thanks
vanstorm said:
Does it make a difference if I do a factory reset or flash 1.83 sbf with rsd lite 5.0? I am currently rooted on 1.83 gingerblur 3.5 and wanted to try and clean up some issues and start from scratch. Also is there a full 1.83 sbf to use or is it just an update. After the factory reset or flash I do plan to re-root with gingerbreak and re-install gingerblur 4.5. Any suggestions on which method is preferred is appreciated.
Thanks
Click to expand...
Click to collapse
Flash the 4.1.57 sbf, then OTA back to 4.1.83.
Thanks for the help
Will my phone automatically prompt for the OTA update after I flash 1.57 and where is best place to download 1.57 sbf gitibrew? Also I'm on AT&T not sure if that matters with the SBF or not.
Thanks again
vanstorm said:
Thanks for the help
Will my phone automatically prompt for the OTA update after I flash 1.57 and where is best place to download 1.57 sbf gitibrew? Also I'm on AT&T not sure if that metters with the SBF or not.
Thanks again
Click to expand...
Click to collapse
Yup, Gitbrew is the place to get it.
4.1.57 is for AT&T.
After you flash and set up your Motoblur account again, go to Settings > About phone > System updates
You will then get the prompt to download 4.1.83, then install it.
So I have my phone unlocked and rooted. If I have to return my phone for whatever reason, how do I get "Unlocked" to remove from the boot screen? Is that even possible? Currently running 4.5.91
When you SBF back to 1.2.6 or 157 or 183 it will remove it but if you used
the OTA then DONT FLASH A SBF!
Read Around there is a bunch of stuff on the dev fourms on how to go back
the proper way please I stress read read and read again before you do anything.
Ya I definitely know not to sbf to an older since I did the OTA update. Can I safely sbf to the official 4.5.91 release?
Sent from my MB860 using XDA App
kidoh1 said:
Ya I definitely know not to sbf to an older since I did the OTA update. Can I safely sbf to the official 4.5.91 release?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
this will get you started...
http://forum.xda-developers.com/showthread.php?t=1182526
or here
http://forum.xda-developers.com/showthread.php?t=1125944
deziguy420 said:
this will get you started...
http://forum.xda-developers.com/showthread.php?t=1182526
or here
http://forum.xda-developers.com/showthread.php?t=1125944
Click to expand...
Click to collapse
Read through both threads. Still unsure if it's safe to flash either SBF and if it's going to remove "Unlock" during the boot. Right now I'm on the OTA update (so can't downgrade) and unlocked.
kidoh1 said:
Read through both threads. Still unsure if it's safe to flash either SBF and if it's going to remove "Unlock" during the boot. Right now I'm on the OTA update (so can't downgrade) and unlocked.
Click to expand...
Click to collapse
the first SBF (the 4.5.91 with pudding baked in) definitely won't take out Unlock since it's with unlock in there already.
Stock SBF can potentially take out "Unlock", but I don't think anyone's determined whether it is safe to flash stock 4.5.91 sbf once you're OTA'd. I'm not planning to try : )
mysticdrew said:
the first SBF (the 4.5.91 with pudding baked in) definitely won't take out Unlock since it's with unlock in there already.
Stock SBF can potentially take out "Unlock", but I don't think anyone's determined whether it is safe to flash stock 4.5.91 sbf once you're OTA'd. I'm not planning to try : )
Click to expand...
Click to collapse
Thanks for the input. Well, so far I've read that I can't downgrade. Not sure if flashing the stock 4.5.91 sbf is considered a downgrade. I'm thinking not. Maybe I'll try and see what happens.