i just installed a new rom..... but when i go to clockworkmod.... it stuck at the lg page..... i tried looking for solution... i tried the emergency mode method... but after i did that... my phone just cant trun on... I cnt enter emergency mode.. i cant enter clockworkmod......
What do i need to do??? Is there any hope??
Hi there,
I had the same problem as you or so I think ( http://forum.xda-developers.com/showthread.php?t=1023017
The black P500 is DEAD!).
I have tried finding solution but I am yet to come across anything. Service center?
Cheers
Sent from my LG-P500 using XDA Premium App
is thr no alternatives?? beside service center?? wat if found out.. that i tried to installed custom rom on my droid?
there is always a way i think, i bricked my phone using the clock work rom so was in the same situation you are in... just download a LG official firmware based on your country and also the KDZ flasher
enter emergency mode by holding the Vol down+back button at the same time and insert the microUSB cable you'll enter the emergency mode surely
once in emergency mode your PC will detect the phone and then follow this link http://forum.xda-developers.com/showthread.php?t=883314
I tried that... because of that...... my phone cant even enter clockwork mode or emergency mode....
if u tried it then just flash a stock rom and take it to the service center and tell them that it is just stuck in that logo they wont be able to figure out and they will get it done max in 3 hrs
Mine couldn't be turned on to. Don't worry, for most of the times, they won't check because it's a waste of their time
Sent from my LG-P500 using XDA Premium App
Service centre is the last option cause u have damaged ur hardisk.....
go to service centre if its in warrenty then they will change ur harddisk for free.....
but if its not then u r in a great trouble......
Related
Sorry if a topic in the wrong section ...
The problem is this: After a failed firmware phone, my phone will not run at all, tried to include a variety of ways, there is no reaction at all, black screen does not work ... do not turn on ..
Is there a solution how to cure a dead mode?
thats pretty vague. looks like you have a bricked phone but describe what you did
update the phone via KDZ. KDZ has written a mistake, still gleaming yellow screen, turned off the phone and all ... more it is not included ... help ....
http://forum.xda-developers.com/showthread.php?t=1183579
emergency mode not included....
Manitikyl said:
emergency mode not included....
Click to expand...
Click to collapse
what do you mean not included !?
read this >>
http://forum.xda-developers.com/showthread.php?t=1197111
Manitikyl said:
emergency mode not included....
Click to expand...
Click to collapse
i believe emergency mode is back+volume up+power
telephone does not ring at all the reactions ...
Please don't use google translate! It sucks!
sweetnsour said:
i believe emergency mode is back+volume up+power
Click to expand...
Click to collapse
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
InfiniteRisen said:
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
Be careful, one of those key combination will reset the phone to factory defaults.
And it doesn't ask for permission when it does...
InfiniteRisen said:
Power+VolDown+Home isn't it?
Sent from my LG-P509 using XDA App
Click to expand...
Click to collapse
this is to boot into recovery. im talking about emergency mode
Da_Android said:
Be careful, one of those key combination will reset the phone to factory defaults.
And it doesn't ask for permission when it does...
Click to expand...
Click to collapse
a factory reset will be performed if you dont have a custom recovery. if you do have one, this is the combo to boot into it
from my thread >>>
Hello,
- i'm the proud owner of an LG P500, i mannaged to "kill" it alot of times, one time i bricked it so bad the power button was useless. I'm going to tell you how i always manneged to fix it.
1. - install the USB DRIVERS for LG P500 Download LINK
2. - extract the KDZ archive , install msxml.msi, Download LINK, Download Froyo 2.2.2. v10E.kdz after that open >> KDZ_FW_UPD.exe, select type 3GQCT and mode DIAG (select this only if your phone starts when you connect the USB and the battery charging logo apears) if the phone starts in Emergency Mode or dosen't start at all >> remove battery and while holding the BACK and volume UP buttons connect the USB, the phone should start in Emergency Mode, after that select in KDZ, MODE > EMERGENCY, select file > V10E_00.kdz and press the "Launch software update" .
- wait for KDZ to do it's job ( until it says FINISHED) after it is finished it will reset the phone (alot of times the phone wolden't start after reset and i had to start it manualy @power button) an LG logo should apear , then an Android logo, wait about 5 - 10 min (the phone should start and you will have froyo 2.2.2. working), but if the Android LOGO stops or lags for 2,3 seconds then you must remove battery , put it back , and power on the phone. if it dose the same thing , then you must reflash your phone. Usualy it works with the battery on and simply flashing under DIAG mode.
- after reflashing if you have the same problem , you must remove battery and try installing it DIAG mode. if it still dosen't work enter emergency mode ( UP + BACK + connect USB (or press the power button)) and reflash using KDZ , MODE >>> EMERGENCY.
- when phone is connected go to COMPUTER > PROPERTIES > DEVICE MANAGER > MODEMS > and disable LGE Modem.. (some say it helps i diden't saw any difference.)
- as i was saying i killed my phone alot of times, KDZ always helped me bring it back to life , be patient.. and if you get alot of errors and flash meny times the phone gets hot , leave it to cool for a while and then try again.
be patient !! hope this will help you ..
sorry for my bad english !!
you really need to stop posting that without giving proper credits
these links cover exactly what youve said
http://forum.xda-developers.com/showthread.php?t=1060121
http://forum.xda-developers.com/showthread.php?t=875881
Sent from my LG-P500 using XDA Premium App
Hey guys plz help me fast i was using mik's cm7 6.5.8 yesterday at night i switched off my phone now today at the morning when i tried to switch it on it showed 0% charge then shut down now when i try to charge it its stuck on the grey lg logo after leaving it for an hour also it is not working even after tryting to reboot its happening.when i booted it into emergency mode it was booting but my phone cannot b detected by my pc to use kdz plz guys help.....
after u plug the charger, switch on and go to custom recovery, leave it for half hour and then reboot
you didn't understood when i plug the charger it turns itself on rather than charging and i can't boot into recovery either only emergency mode can be done
Devil_Dude said:
you didn't understood when i plug the charger it turns itself on rather than charging and i can't boot into recovery either only emergency mode can be done
Click to expand...
Click to collapse
I understood your problem, the fastest way is using LGMDP ( the Russian's LG P500 tool help us to flash baseband ) flash the baseband that your phone is having. EX:
Now your phone have the old baseband , so you just go to LGMDP , choose your phone , and then flash the old baseband .... It should be get out of emergency mode. If the LGMDP Freeze when it's flashing the baseband , you have to use the Task Manager on Windows ( Ctrl + Alt + Delete ) , it should show up the task manager or a board that have the "start task manager" line and you have to click that line. After open the task manager on windows, see on the top, click on the "Processes" Tab , and then find the "LGMDP.exe" and then click on "End Process" . And start LGMDP again
Maybe you should return to the default 2.3.3 and stop using experimental os-es!
@thachtunganh my phone is not detected by pc even after i flashed cm7(this is bull$#!T)
@s0v3r3ign69 i am never gonna do dat...
Hope this might work for u:
1.plug in charger to ur phone without switching plug on.
2.keep vol down and home butoon pressed and then turn on charger(with buttons pressed).
3.Then u should enter into recovery mode.
4.then do fresh install of this rom.
ashishv said:
Hope this might work for u:
1.plug in charger to ur phone without switching plug on.
2.keep vol down and home butoon pressed and then turn on charger(with buttons pressed).
3.Then u should enter into recovery mode.
4.then do fresh install of this rom.
Click to expand...
Click to collapse
nope its not working yet...
but now i can say i have charged the battery by some exteranal source now the problem is that my phone is still not booting up(Its stays on the first Grey LG Logo) neither its detected by my pc in emergency mode....
Devil_Dude said:
nope its not working yet...
but now i can say i have charged the battery by some exteranal source now the problem is that my phone is still not booting up(Its stays on the first Grey LG Logo) neither its detected by my pc in emergency mode....
Click to expand...
Click to collapse
cant u enter recovery mode???
i can but my phone is not detected by my pc...
In recovery,enter mass storage mode and ur phone will be detected.Then copy zip file of rom and flash it.
I dun know if this helps i had mine stuck in emergency mode no matter what i did when i power up after the lg logo it goes into emergency mode n also not recognise by pc so i use the kdz updater and instead of DIAG i set it in emergency and i updated stock rom and it works of course i rooted it straight away ...hope u had yr problem solved by the time u read this cheers
Sent from my LG-P500 using xda premium
Sorry i forgpt remove yr battery when u connect to pc and just before the kdz finishes insert yr battery done
Sent from my LG-P500 using xda premium
Devil_Dude said:
i can but my phone is not detected by my pc...
Click to expand...
Click to collapse
If you can boot into custom recovery then y dont you flash mik's rom 6.5.8 again over the present one without erasing anything, try it your problem might be solved
i can boot into only emergency and there is some problem with my phone's usb port whenever i flash any unofficial rom its not detected by my pc anymore....
and guys if my phone was ever detected by my pc i could have used kdz by now cause i have flashed more than 30 times using that and 4 times to unbrick my phone yet....
ashishv said:
In recovery,enter mass storage mode and ur phone will be detected.Then copy zip file of rom and flash it.
Click to expand...
Click to collapse
In recovery go to mounts and storage and in the select mount USB and boom ur phone will be detected in PC now u can reflash the rom after copying the file to sd..remove to wipe everything befpre u do that !!enjoy! N press thanks..
Sent from my LG-P500 using xda premium
Devil_Dude said:
@thachtunganh my phone is not detected by pc even after i flashed cm7(this is bull$#!T)
@s0v3r3ign69 i am never gonna do dat...
Click to expand...
Click to collapse
WTF? ..... i think your PC have the problems.... check the driver in device manager....
---------- Post added at 02:56 PM ---------- Previous post was at 02:44 PM ----------
androidusero1p500 said:
In recovery go to mounts and storage and in the select mount USB and boom ur phone will be detected in PC now u can reflash the rom after copying the file to sd..remove to wipe everything befpre u do that !!enjoy! N press thanks..
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
What are you talkinh about? the PC can not detected his phone , it mean this problem is causing by the driver on PC or his phone... and what can mount usb can do, the option mounts usb mass storage doesn't help anything , it just can like mount usb mass storage when your phone is on....
i have reisntalled all the driver again but its not wokring yet buti think its time to goto the F**king service center **** this i cannot even flash a official rom
dude
you can enter into emergency mode right??
so restart your phone(press power button+volume up+back button and enter into emergency mode)
then in kdz instead of DIAG select Emergency/CS_Emergency
and try
it should work!!
EDIT:going through the above posts looks like your phone's USB port isnt working
maybe its better you give the phone to LG for repair :/
thachtunganh said:
and what can mount usb can do, the option mounts usb mass storage doesn't help anything , it just can like mount usb mass storage when your phone is on....
Click to expand...
Click to collapse
What do u mean,his battery is charged man.
Hi,
I accidentally flashed my Galaxy Ace S5830I with the S5570i file using odin. I was in a rush and it didn't double check before clicking on start! Now the phone turns on, the camera flashes and you can hear the Samsung startup tune but you can't see anything on the screen. It's just filled with alot of colours.
I'm having trouble putting the phone back into download mode as I can't see anything. I've tried pressing VOLUP+VOLDOWN+POWER Button and VOLDOWN+POWER+HOME but they're not working. Sometimes the Odin box goes yellow and I click start but it stops at ..Setup Connection..
Pleaase any help will be much appreciated!
Your Ace is destroyed . Only a trip to the service center can save it
Defy-ing all limits.
There must be a solution. The phone turns on and you can hear Samsung tone. There is no Samsung service centre where I'm living. I did this for a customer and will probably lose my job over this lol. I just need a way to put it back into download mode.
brickedace said:
There must be a solution. The phone turns on and you can hear Samsung tone. There is no Samsung service centre where I'm living. I did this for a customer and will probably lose my job over this lol. I just need a way to put it back into download mode.
Click to expand...
Click to collapse
usb jig is said to be working for 5830i..
so try it out to make it to download mode
can u put it in download mode?
SnowPluralism said:
can u put it in download mode?
Click to expand...
Click to collapse
No thats the problem. I can't put it in download to re-flash it with correct files. I have tried a number of different keypad sequences but none of them have worked. I think recovery mode worked tho yet.
Try to reflash from factory recovery the CWM, then reboot into recovery again, and restore your previous backup (you do have one, right?).
Is there Any sign of Samsung logo on startup(WHEN PRESSING THE POWER BUTTON)
Sent from my GT-S5830 using XDA
maybe go to recovery and wipe every thing
Sent from my GT-S5830 using XDA
there is a thread here about unbricking galaxy ace. you should try that
Hi , I've flashed the bootloader on my Galaxy 5 but it failed in the middle.
Now the phone won't boot up at all
Even when i plug it in a charger it's not showing anything!
Help Please !
evtimov96 said:
Hi , I've flashed the bootloader on my Galaxy 5 but it failed in the middle.
Now the phone won't boot up at all
Even when i plug it in a charger it's not showing anything!
Help Please !
Click to expand...
Click to collapse
try pressing volume down+home+power simultaneously an wait for some seconds......... if nothing happens, it means ur phone is bricked and u will have to go to service center to get it repaired
forum.gsmhosting.com/vbb/archive/t-1448069.html
That should help..
Mail in if you have any trouble.. Thats the most robust phone ever.. Will be back up and running in no time.
Sent from my Galaxy Nexus using xda app-developers app
If it doesn't charge it's a brick.!
Try getting into download mode with a USB jig. If that fails then the samsung service center is your only option.
My wt19I. Won't boot not charging.and will not connect to pc .. my pc can't detect my phone.. even connect to flashmode and fastboot seems dead ..plzz help me and guide me if there where fix to my phone hope you help me guys thank you ... it has unlocked bootloader rooted .
Try that:
1. Take off the battery
2. Wait 15 seconds
3. Insert the battery in your phone again
4. Hold volume down and while holding volume down connect it to your PC. Just press volume down and connect.
5. Now the green led should light up and you are able to reflash the stock rom
If your PC still doesn't recognize your phone, install all drivers for all devices/modes from flashtool -> drivers, reboot your PC and start again with step 1
Sent from my Nexus 4 running Android 4.3
still
I have tried that method sir .. over and over again still I can't make it work the technician told me. The software is the problem.
my phone won't start sir it will not charge even I've change the battery to a new one.. help plzz
But does it enter fastboot mode? This is done by holding VOL + while powering on or connecting your phone to the computer, you'll know you entered fastboot when the notification led turns blue if not there is not much you can do by yourself to fix your phone.
chenne07 said:
My wt19I. Won't boot not charging.and will not connect to pc .. my pc can't detect my phone.. even connect to flashmode and fastboot seems dead ..plzz help me and guide me if there where fix to my phone hope you help me guys thank you ... it has unlocked bootloader rooted .
Click to expand...
Click to collapse
Try to enter in fast boot mod and still phone cant get into fastboot then go to service center for final solution they can do something better than us ...
All the best ...good luck
Sent from my Xperia Live with Walkman using xda premium
chenne07 said:
I have tried that method sir .. over and over again still I can't make it work the technician told me. The software is the problem.
my phone won't start sir it will not charge even I've change the battery to a new one.. help plzz
Click to expand...
Click to collapse
your technican is dumb. it it was a SW problem u can be fixed....
BUT if u cant: enter fastboot mode (blue led while phone OFF); flashmode (same with green led), i would say its a hard brick = no way to get workin (probably...)
Q: did u tried charge bazttery on other phone + and enter CWM ??? if not its a brick
same here
i have same problem with my cell wt19i and its still dead.
i hve tried everything to resurrect it bt no luck...so i got new one
and one thing i can tell u is try jtag cable to flash your cell and try to connect to pc.
go to some repairing center and tell them cell is dead but i want to flash it.
my problem was i tried to unlock with test point (most risky way) to unlock bootloader.
and it burst power ic which cannot be replaced.
so be sure what problem your cell exactly has.
My wt19i can't connect with flashmode
I installed a cyanogenmod 11 custom rom,after that i can't flash using flashtool,It can't connect flashmode,I connected to pc pressing vol- button