I had installed android on my HD2 ... i wanted to go back to windows so I got a ROM from the HTC website but now my phone keeps restarting and it doesnt stay on ... I urgently need help, so please help !
Battery pins.
no the pins are okay ... any other suggestion ?
any other reason that you can think of ?
not for constant restarting,, no, but if you mean frequent restarting, meaning the rom boots and sometimes runs for a bit and then restarts, well thats a different issue, and if it does it on multiple roms, then its sounding like a hardware problem.
what rom is on it right now? what does spl say in bootloader (check, dont just assume its what you think it is, have an actual look in bootloader.)?
either the phone stays stuck on the logo screen and if it does start then it starts restarting after a while ... on the tri colored boot loader screen is says SPL-2.08.000 and something MicroP(LED) and MicroP(TOUCH)
do you have a TMOUS? because if not, then that spl is wrong,
so I got a ROM from the HTC website
Click to expand...
Click to collapse
there are no roms on the htc website with spl 2.08, so you have obviously flashed a regular rom but then reset hspl using another method, which, if im right so far could well be a 3.14 rom, and they DO NOT work on spl 1.x or 2.x on a reglar hd2.
Assuming you have a regular hd2 (white send/end keys)
if the rom you flashed IS 3.14 version,
into bootloader
hspl4
choose 3.03.0000
reboot, all should now be well.
or if that doesnt work
into bootloader
usb
hspl2
choose 1.66.0000
bootloader
usb
run the stock rom flash from the PC.
let us know.
RUU_Leo_TMO_UK_1.72.110.4_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship ... this is the ROM I have right now ... now i tried task 29 and with hspl2 i made the hspl version 1.66.000 but now the ROM is not flashing ... it just stays stuck on 0% !
Did you get that rom from HTC.com using your phones serial number?
yes i did !
with hspl2 i took the spl down to 1.42.000 and installed "RUU_Leo_TMO_UK_1.43.110.2_Radio_Signed_15.26.50.07U_2.04.50.22_2_Ship" ... the installation was fine but now the phone is stuck on the logo screen !
keeping in mind that i can only go as far as the bootloader screen what windows spl and radio would you recommend ... i have a TMobiles UK handset and i really need help !
Ok, so in that case it sounds like an actual fault. I'd go get the 3.14 t mo UK rom and flash that from SD card. If problem persists then definitely hardware.
can you tell me how to flash it from the sd card ?
susmani said:
can you tell me how to flash it from the sd card ?
Click to expand...
Click to collapse
To flash ROM via micro sd card:
1.Turn off your phone and remove your sd card.
2. Download to your pc, the CORRECT STOCK ROM (if you want to go back to stock rom) or any custom ROM. (Keep in mind that you will need HSPL to flash any custom rom as a pre condition).
3. After download, check whether the downloaded file is not corrupted.
4. If you want to flash stock rom, then you should extract the downloaded file (use 7zip or winzip or winrar). Find the file name: "RUU_signed.nbh" (without quote) and rename it to: "leoimg.nbh" (without quote) (note: nbh is a file extension for image).
5. Back up all files in your sd card to your PC. Then format your sd card to FAT32 partition. Copy file "leoimg.nbh" (without quote) to the root directory of your micro sd card.
6. Put your sd card back to your phone.
7. Press the vol down and power on buttons AT THE SAME TIME. Wait until bootloader screen appear and it will change ito white color screen.
8. Follow the on-screen instruction.
Done
Note:
-before doing that, make sure your battery capacity is at least 50%
-the above methods also apply for flashing any custom rom BUT YOU MUST HAVE HSPL installed before flashing it, otherwise it will fail.
Good luck
Related
Hi, i need to remove HSPL and wonder if anybody have a stock...i mean stock rom for Sweden (SE). All i found is broken links. From HTC Sweden 1.48 and 1.66 can be downloaded. But we started out on 1.43 and i guess thats what i need to get rid of HSPL.
HTC Support site?
Try downloading one of these from HTC Support. (You will need your serial)
Then start the upgrade utility, follow instructions until you need to awknoledge you have read the warning in red.
Now in your temp folder there will be a folder containing the ROM (RUU_signed.nbh). (in my case the folder is named pft100.tmp)
Copy the ROM to a safe place
Close upgrade utility.
Now follow instructions as in Flash guide:
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
This method removes HSPL!!
slightly simpler ways to get the ruu_signed file
right click the rom.exe choose extract here
or
right click the rom.exe and choose open with (winrar, winzip ro whatever)
or
right click the rom.exe choose rename and change the extension from .exe to .zip then double click the file to open it with winrar/winzip whatever you have installed.
however you dont really need to extract the .nbh file anymore, you can run hspl2 and choose 1.66.0000 (or 1.42.0000) and then when it has done hspl is now gone, and you can flash the rom over usb by running the .exe.
Also, , Leo Official Roms thread, first post first link, , the 1.48 and 1.66 folders both contain SVE stock roms.
Thnx for your quick and detaild responses.
Why i asked for a official 1.43 or old Swedish rom was because i have done the steps above (Exept using HSPL2) and when i boot (with volym down) nothing happens, text is saying serial on boot screen.
Now, im using the first HSPL (perhaps the first ever to come out) version since my phones is old now (almost a year =). Could maybe this fix it, and isnt HSPL2 for us modells of HD2?
Nakazul said:
Thnx for your quick and detaild responses.
Why i asked for a official 1.43 or old Swedish rom was because i have done the steps above (Exept using HSPL2) and when i boot (with volym down) nothing happens, text is saying serial on boot screen.
Now, im using the first HSPL (perhaps the first ever to come out) version since my phones is old now (almost a year =). Could maybe this fix it, and isnt HSPL2 for us modells of HD2?
Click to expand...
Click to collapse
nope, hspl2 is for regular hd2, , the first one that you have only supported 1.42.0000, hspl2 supports all spl versions. HSPl3 is for US tmous hd2 (and telstra).
Downloaded HSPL2. Installed Swedish stock rom 1.66 and used HSPL2.... it worked, incredble. Thnx for the help all.
Like the title says, im just stuck at bootloader and instead of booting to the white screen it just stays on bootloader and says "SERIAL".
Ive googled, youtubed, and searched here, and many have the same problem, but i have yet to seen a solution to this.
I have tried android and many custom roms, and now im back on original ROM and everything works great. BUT i have HSPL in my phone and i dont want it for now.
It is a very easy procedure in the guides and should not be a problem, but please how can i get my LEOIMG.nbh to boot from my memorycard?
It is formated FAT32, and i have tried redownload the stock rom and unpacked it with winrar several times, but the result is always the same.
Is there some way to go around this? I Just wanna boot from the memorycard and restore my phone.
FYI, the restore is just for warranty issues.. I just want to be able to go back just to be on the safe side..
Then after that i can try the cooked roms all days
Thanks!
What size is the microSD card? As there has been reports of problems flashing from 16GB cards.
While in bootloader mode, you can plug in the microUSB and the 'Serial' should be replaced by 'USB'. This means that you can run the flashing from the computer (just ignore the requirement for ActiveSync).
Thanks for the quick reply!
I have a 8 GB memorycard.
Just before i read your post i inserted the usbcable and the screen on my htc says "USB".
But how do i uninstall HSPL from my PC in usbmode? Use customRUU and place LEOIMG.nbh in that folder?
If you install either the HTC Stock or your mobile provider's ROM (what ever you need for warranty requirements), they will flash your phone with SPL, ROM and RADIO.
These ROMs are avaiable from your mobile provider's website or via a link in the ROM Section.
Sounds great!
So i just run the original .exe file from my PC when my HTC HD2 is in bootloader screen in USB-mode, correct?
I have alreade flashed with original rom from PC when my phone was online. But then the HSPL did not go away even though my original rom was installed.
I could use alittle help too
when i try to update it stops at 4% tried to flash other energy roms with the same issue. don't know what todo to get past 4%
fred_up said:
If you install either the HTC Stock or your mobile provider's ROM (what ever you need for warranty requirements), they will flash your phone with SPL, ROM and RADIO.
These ROMs are avaiable from your mobile provider's website or via a link in the ROM Section.
Click to expand...
Click to collapse
won't flash the spl over usb whilst hspl is installed.
H4z3 said:
Sounds great!
So i just run the original .exe file from my PC when my HTC HD2 is in bootloader screen in USB-mode, correct?
I have alreade flashed with original rom from PC when my phone was online. But then the HSPL did not go away even though my original rom was installed.
Click to expand...
Click to collapse
use the hspl.exe program to remove hspl just like you used it to apply it. just choose a stock spl instead of the hspl.
example, regular hd2, wants to go back to o2 stock everything.
run hspl2, choose 1.66.0000
run the o2 1.72.exe rom over usb.
all done.
if the rom doesn't flash its not the correct stock rom.
samsamuel said:
use the hspl.exe program to remove hspl just like you used it to apply it. just choose a stock spl instead of the hspl.
example, regular hd2, wants to go back to o2 stock everything.
run hspl2, choose 1.66.0000
run the o2 1.72.exe rom over usb.
all done.
if the rom doesn't flash its not the correct stock rom.
Click to expand...
Click to collapse
At first i used HSPL 3 to install 2.08.0000 HSPL.
But if i run that file again i only have the choice 2.08.0000.
I downloaded a previous version of HSPL, and there i could choose SPL 1.42.0000 wich was my original SPL version before the flash.
Is this a correct way to do this?
I am asking again because even though i now am at the original ROM and Original SPL version the Radio and Protokoll-version differs from the versions when i bought the telephone.
radio and protocol doesn't matter. yes you've done it right. so long as its a stock rom and the spl ends 0000 then it's fine.
Ok thanks!
Then everything is ok now and i am very happy for that, so thanks for all answers!
I can also add that i took my original SD-card (2GB) and put the LEOIMG.nbh on it.
The bootsequence then started ok when holding down volumebutton and power on.
But the result was exactly the same as it was when flashing to stock SPL with HSPL2 utility.
So the booting-problem was memorycard related.. So it seems that even some 8 gb memorymodules have problems.
Just thought you should know.
Hi guys,
At the moment i have SSPL.
I want to install HSPL3 - 2.08
but i cant unstall the sspl.
when i try to install hspl, i get error, BAD SPL VERSION
to install my sspl i used the folowing steps :
1. Remove SD (and remove Application Data and Program Files folders from it using SD card reader)
2. Remove HSPL with HSPL2_RUN.exe (flash SPL 1.66.0000 with HSPL2_RUN.exe)
3. PowerOff the phone
4. Boot to bootloader (VolDown+PowerOn) and when it shows "USB" flash stock ROM by running matching RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.15 .50.14_LEO_S_Ship.exe (get yours HERE or for Orange UK/FR HERE)
5. Hard Reset (when phone starts booting after step 4, remove the battery, insert it back press VolUp+VolDown and still holding both press PowerOn and follow the instructions)
6. Boot to homescreen.
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
8. Hard reset (instructions in step 5)
9. when on homescreen - softreset.
10. Insert SD
Any help?
you dont have sspl, 'sspl - soft secondary program loader' is a one shot version of 'hspl - hard/hacked secondary program loader'.
You have 'spl - secondary program loader' - stock spl.
If you followed those steps you now have spl 3.03 and so hspl will not work. You must downgrade your phone to an earlier rom/spl version. 1.66 for example. USB will be fine so long as its your correct stock rom, , any version except 3.14.
samsamuel said:
you dont have sspl, 'sspl - soft secondary program loader' is a one shot version of 'hspl - hard/hacked secondary program loader'.
You have 'spl - secondary program loader' - stock spl.
If you followed those steps you now have spl 3.03 and so hspl will not work. You must downgrade your phone to an earlier rom/spl version. 1.66 for example. USB will be fine so long as its your correct stock rom, , any version except 3.14.
Click to expand...
Click to collapse
how can i downgrade?
its not working
as i said, get your stock rom, any version, but it must be correct for your phone, and flash it usb is fine. that's it.
AAh ok thanks it worked
I flashed original 1.66 ROM
No w i was able to install HSPL
Thanks!!!
no worries.
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
Click to expand...
Click to collapse
i had similar issues, i used task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work or install Android then. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
Click to expand...
Click to collapse
Is your phone branded (T-Mobile, Vodafone, O2, Orange, etc) and to what country?
If you are using a T-Mobile USA HD2, then you may try and flash the 2.08 TMOUS ROM.
Hey,
I want to do the exact same thing and I am locked on Orange? Is it possible to downgrade?
lhayati said:
Hey,
I want to do the exact same thing and I am locked on Orange? Is it possible to downgrade?
Click to expand...
Click to collapse
If you can find the previous stock ROM than yes. But it's a hard one to find (Orange UK)
Problem with spl3.03
Hello all. I trying today upgrade my htc leo to 3.14 rom but right now my htc is locked and I cant downgrade to any version . I trying to use all countries software for downgrade but allways I have information "NOT ALLOW"
My S/N is HT04YNW00034
Please help me.
dalisman said:
Hello all. I trying today upgrade my htc leo to 3.14 rom but right now my htc is locked and I cant downgrade to any version . I trying to use all countries software for downgrade but allways I have information "NOT ALLOWED"
My S/N is HT04YNW00034
Please help me.
Click to expand...
Click to collapse
Mate, do you want to upgrade or downgrade? You're statement is confusing
what do you mean "locked"?
As long as you flash the CORRECT STOCK ROM, you can upgrade or downgrade.
What you have to do first is find the CORRECT STOCK ROM".
you can't try all countries version, it is dangerous.
Go to htc website and select the country where your hd2 come from, and download the stock rom using your SN.
If you can't find the CORRECT STOCK ROM, the only alternative is using gold card method.
Good luck
I want to downgrade to version 1.66 but I cant beause always when I try to downgrade (using sdcard) I see information "not allow" . lock = Software update failed . please try again.
what is this gold card ?
dalisman said:
I want to downgrade to version 1.66 but I cant beause always when I try to downgrade (using sdcard) I see information "not allow" . lock = Software update failed . please try again.
what is this gold card ?
Click to expand...
Click to collapse
I think you haven't found th CORRECT STOCK ROM, that is why "not allow"
Gold card is a method to enable you to flash stock rom from other country (it is useful in a situation where you can't find the CORRECT STOCK ROM.
There is a thread for gold card, just using search button to find it out
Good luck
I allready check I think all countries because Im not sure from which country is my phone. and always on htc website I see information software is not for this S/N
dalisman said:
I allready check I think all countries because Im not sure from which country is my phone. and always on htc website I see information software is not for this S/N
Click to expand...
Click to collapse
Is it branded phone (telstra, Tmobile, orange, etc)? if yes, you should go to their website instead of htc website.
However, if you still fails, then the only alternative is using gold card method.
I never experience for this though I read it many times, so I would suggest you to search the forum. There is a thread title [GOLD CARD], just use search button.
Good luck
hello
I read about gold card and I understand everything, but my problem is :
my htc is detected by system but not detected by active sync
and I cant make gold card
dalisman said:
hello
I read about gold card and I understand everything, but my problem is :
my htc is detected by system but not detected by active sync
and I cant make gold card
Click to expand...
Click to collapse
I would suggest you to post this at the gold card thread, mate
Maybe there's someone can answer that.
Good luck
i have install NexusHD2-ICS-CM9-HWA_V2.7 and worked perfect and i wanna to get back to win6.5 mobile and get it back my phone is htc hd2 512 ROM ( noooooooooot t-mobile ) i download the official ROM from htc.com install it or there is some things to do ????? plz help me fast :good:
No, you just install it.
option 1 (assuming you downloaded the 3.14 rom)
enter bootloader
flash rom from usb
reboot
enter bootloader
run hspl4
choose 3.03.hspl
reboot
done
option 2
extract ruu_signed.nbh from inside the yourdownloadedrom.exe
rename it to leoimg.nbh
copy it to root of your sd card (sd card 4gb or smaller, 2gb is preffered)
enter bootloader, it should start to flash automatically.
done
---------- Post added at 03:01 PM ---------- Previous post was at 03:00 PM ----------
Spaqin said:
No, you just install it.
Click to expand...
Click to collapse
assuming he doesnt want to remove hspl, that is, if he did 'just install it' and sent it back to htc, they wouldn't honour any warranty since hspl would still be there.
Also, he's just had android installed, so chances are the spl is 2.08.hspl, , , if he installed a 3.14 rom and didnt change teh spl, it wouldn't work, since 3.14 roms dont work on any spl except 3.03.xxxx (for regular hd2, , tmous seems to be able to handle 3.14 roms on non 3.03 spls)
ty aallllllll
HI Guys, I am also looking to install the standard rom back onto my phone as I want to make a claim under my insurance (o2)
The only problem I have is my touch screen has stopped responding (after I spilt petrol on the phone), is it possable to get the phone back to factory rom and radio without the screen working?
Thanks
Gary T
see the link 'Various radios, stock roms and tools HERE' in my sig, the o2 3.14 rom is in there.
either
..
open that exe file with a zip program (change teh extension from .exe to .zip will also work) inside get ruu_signed.nbh, rename it to leoimg.nbh and put on your sd card, reboot into bootloader and it will flash, , thats it.
or
...
into bootloader, connect usb, , when serial changes to usb on teh screen, run that .exe file. when its finished, go back into bootloader, connect usb, and run hspl4, and select 3.03.0000, done.
Hello. I'll use the thread to ask a simple question. I bought HD2 and it currently has Android ICS. I don't want to brick my phone in day 1 so to flash it back to WM6.5 I have to follow this guide, right ? http://www.youtube.com/watch?v=X--T--kvE24
The only thing that worries me is that I have spl-2.08.hspl not the 1.42 stated in the video, is that a problem ? I will use dutty's rom kitchen. Thanks.
EmZvr said:
Hello. I'll use the thread to ask a simple question. I bought HD2 and it currently has Android ICS. I don't want to brick my phone in day 1 so to flash it back to WM6.5 I have to follow this guide, right ? http://www.youtube.com/watch?v=X--T--kvE24
The only thing that worries me is that I have spl-2.08.hspl not the 1.42 stated in the video, is that a problem ? I will use dutty's rom kitchen. Thanks.
Click to expand...
Click to collapse
if you flashed over USB, then hspl isn't replaced, which is why it is still on 2.08,hspl.
Its perfectly fine, assuming you arent wanting to send it for warranty. if you do want to go back to 1.42 then use HSPL2.exe and set 1.42.0000
Hi All,
I m trying to go back from android to winmobile and my device is stuck...
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
I have tried to flash different winmobile roms include RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship and i have tried to flash HAED SPL 4 and i received error in device id...
In bootloader it appears correctly with SPL-2.08.HSPL 8G XE, and in the white eare it write Serial in in the begining and when I try to flash it change to USB.
The main problem is that I have tried to flash Energy.Leo.21916.Sense2.5.Jul.04 above android it stuck on 4% and I can't reflash anymore, when i try to reflash it stuck on 0% no matter what I do.
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
Please advice...
sagytb said:
I have tried to flash different winmobile roms include RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_
Click to expand...
Click to collapse
do you have a tmous hd2? because if you do you are VERY lucky not to have bricked it, , the tmous CANNOT just take any old stock rom, it MUST be a tmous stock rom, and that one listed above isn't.
go get the real tmous rom, try to flasj it over usb with the phone in bootloader, , if it fails, extract ruu_signed and flash it from sd card (4gb sd card or smaller, , bigger wont work)
If you get any errors (especially the blue writing on white when you sd card flash, , example ''radio fail'') let us know.
I have european device no Tmobile device.
Is there any hope?
Well rom update error usually means you tired to flash the wrong rom over SD card whilst hspl is installed, however since you say it still says 2.08.hspl then its not that,
(incidentally, that's not a correct spl,,,2.x are tmous spls, they'll work on the reg HD2,and are required for magldr Android etc, but they can cause issues going back to stock, nothing critical, but can annoy )
I personally think you have a stuck radio,, confirm this by flashing the correct rom from SD.
By correct rom, i mean if the phone is originally a german o2 phone, flash the german o2 rom, if it was bought rom unlocked (this has nothing to do with the network lock), from for example carphone warehouse, in the uk, then use the wwe rom, for uk voda, use the uk voda rom, only the correct rom will flash from sd card.
#take note of what it says, blue writing on white background, during the flash.
first, thanks for your help, i manage to flash wwe roms, but when i try to flash hard spl, it stuck again, in the phone, in bootloader menu (3 colors) i see usb mode and it doesn't continue to flashing mode (black screen) and it stuck on the SPL execution as well, some times i receive unknown errors.
I have tried to flash from sd card several wwe roms (i have no idea what was the original) and the problem is the same.
Any solution ?
Can i flash hard spl from sd card?
sagytb said:
Can i flash hard spl from sd card?
Click to expand...
Click to collapse
no, you can't.