Hi all,
If i change my baseband through the flashtool, would it go back to the original baseband if i did a repair in seus or will it stay with the baseband i have flashed?
edit: Come on guys please reply. I need to know ASAP
xperiax10mods said:
Hi all,
If i change my baseband through the flashtool, would it go back to the original baseband if i did a repair in seus or will it stay with the baseband i have flashed?
edit: Come on guys please reply. I need to know ASAP
Click to expand...
Click to collapse
this thread will be useful : http://forum.xda-developers.com/showthread.php?t=928343
yes you can go back to your original bb, via SEUS, basically SEUS flashes your phone to SE version of Android 2.1, it goes back to stock...
or just flash back to your previous bb using the flashtool
regencyhood said:
this thread will be useful : http://forum.xda-developers.com/showthread.php?t=928343
yes you can go back to your original bb, via SEUS, basically SEUS flashes your phone to SE version of Android 2.1, it goes back to stock...
or just flash back to your previous bb using the flashtool
Click to expand...
Click to collapse
Thanks man, your the best.
i've hit the thanks button for you
Related
after flash to the newest firmware which is .435 , i have no signal at all, then i tried the 2.2, then 2.3, still no signal service, then i go to JIT, and format the system which i thought it going to be back to the original again, after that, i reboot, the only thing i see is the logo "sony erricson" and it keep stay there............
did i brick my phone?
how am i going to solve this?
please help!
Wrong forum. Fix it thru Seus
goku16 said:
after flash to the newest firmware which is .435 , i have no signal at all, then i tried the 2.2, then 2.3, still no signal service, then i go to JIT, and format the system which i thought it going to be back to the original again, after that, i reboot, the only thing i see is the logo "sony erricson" and it keep stay there............
did i brick my phone?
how am i going to solve this?
please help!
Click to expand...
Click to collapse
Sent from my ARCified X10 with CM7 RC1 2.3.3 Gingerbread
download original 2.1 from xda and try flashing it using flashtool which you can find in this forum. or connect your phone to your pc or mac and try repairing it through SEUS.
SEUS, is only updating the phone which it always said i already have the latest sofwarre (((((
goku16 said:
SEUS, is only updating the phone which it always said i already have the latest sofwarre (((((
Click to expand...
Click to collapse
Yes but install anyway.
Sent from my ARCified X10 with CM7 RC1 2.3.3 Gingerbread
Make sure u flash the firmare for x10a or x10i, whichever phone u have. Download the correct firmware and use bin4ry's tool to flash. I hope this helps
Sent from my X10 using XDA App
there's no other option, it just say already have the lastest, the the button exit-.-
btw, i just tried to flash using flashtool 0.2.6 and there a triangle error above the phone?
please help!
MNA1 said:
Make sure u flash the firmare for x10a or x10i, whichever phone u have. Download the correct firmware and use bin4ry's tool to flash. I hope this helps
Sent from my X10 using XDA App
Click to expand...
Click to collapse
originally, it's x10a.. i chose the latest one which is 435, now i ll try the 504, hope this works
you can download the original firmware from this link
http://forum.xda-developers.com/showthread.php?t=683793
flash it with flash tool
enjoy..........
The reason you didn't had network signal may be that not all roms work with all basebands, so it could have been rom related. Have you also waited till the rom rebooted a few times?
Would anyone be kind enough to upload the SEUS or decrypted firmware files to use with the FlashTool for the new 2.1.1.A.0.6 update? updating through SEUS is no good for me so I need to flash using Bin4ary's Flashtool.
So anyone, Please? I could even donate a little for your effort
M4rL0nV said:
Would anyone be kind enough to upload the SEUS or decrypted firmware files to use with the FlashTool for the new 2.1.1.A.0.6 update? updating through SEUS is no good for me so I need to flash using Bin4ary's Flashtool.
So anyone, Please? I could even donate a little for your effort
Click to expand...
Click to collapse
hey see this link http://tinyurl.com/48ttw33
then select x10 mini pro 2.1 incl. flash tool
google is your friend
PTGamer said:
hey see this link http://tinyurl.com/48ttw33
then select x10 mini pro 2.1 incl. flash tool
google is your friend
Click to expand...
Click to collapse
Very funny I'm asking for the specific 2.1.1.A.0.6 update, that thread is old and the downloads included are for an old firmware, believe me I actually FLASHED my phone to 2.1 using the UK provided in that thread. I suggest you read the title and the OP before trolling
M4rL0nV said:
Very funny I'm asking for the specific 2.1.1.A.0.6 update, that thread is old and the downloads included are for an old firmware, believe me I actually FLASHED my phone to 2.1 using the UK provided in that thread. I suggest you read the title and the OP before trolling
Click to expand...
Click to collapse
in that thread the FW is the 2.1 and the kernel versions that comes with that update is the 2.1.1.A.0.6....
im not understanding what you mean
btw why you dont use seus? seus is the easy way...
PTGamer said:
in that thread the FW is the 2.1 and the kernel versions that comes with that update is the 2.1.1.A.0.6....
im not understanding what you mean
btw why you dont use seus? seus is the easy way...
Click to expand...
Click to collapse
What I'm saying is that flashing with any firmware in that thread gives me a 2.0.A.0.504 build but I need de 2.1.1.A.0.6 to install CM Floyo, unless I'm doing something wrong? maybe you could help me . Updating through SEUS won't work for me, for some unknown reason after running the update service my phone keeps asking me for a Network Unlock Code rendering it useless as an actual phone lol
So the FlashTool is my last hope I guess :/ Anyone?
You can either use the xRecovery, then make a restore on 2.1.1.A.0.6 firmware from xrecovery.
litemint said:
You can either use the xRecovery, then make a restore on 2.1.1.A.0.6 firmware from xrecovery.
Click to expand...
Click to collapse
Didn't think of that... I'll try it out and see what happens
No luck... I even tried decrypting SEUS files myself but I still keep running into the same issue with the 'Unlock Code' meh, I give up.
Would anyone PLEASE upload the decrypted files for a U20a with the 2.1.1.A.0.6 firmware?
I've installed FW 2.1.1.A.0.6 on my u20a and it is now showing U20i and 3g not working... CM6 is working like a charm but NO 3G! Now i'm trying to figure out how to make my 3g work Ideas?
Edit: Downgraded firmware to U20a again (older version) and now I have 3G working on CM6 but now I'm afraid about instability. 1 hour up and everything is ok. No reboots yet.
It shouldn't give you any problems, I'm pretty much running on the same setup without any glitches (so far).
Sent from my X10minipro using Tapatalk
Hello. I got SE X10 rooted.
Android version: 2.3.5
Basaband ver: 2.1.71
Mod version: ZMOD
Build number: CM7-ZDZIMU-MOD
I rooted & install xRecovery by this guide: http://forum.xda-developers.com/showthread.php?t=1196421
And i using this ROM: http://forum.xda-developers.com/showthread.php?t=1213843
Now i need get phone to STOCK firmware. I forgot to backup original FW. I tried PC Companion and it's not work.
My SI: 1232-2950
just SEUS it or flash this:
http://forum.xda-developers.com/showthread.php?t=1192152
I need fully STOCK FW without xRecovery to send mobile back to shop.
Arnold.Alexius said:
just SEUS it
Click to expand...
Click to collapse
Did you try SEUS???
Svesik said:
I need fully STOCK FW without xRecovery to send mobile back to shop.
Click to expand...
Click to collapse
Just flash it with stock firmware. Stock firmware are here:
http://forum.xda-developers.com/showthread.php?t=936733
I just did it and my phone is back to factory state.
SEUS or flashtool
i have sony ericsson's x10 mini rooted xrecovery installed, unlocked bootloader,custom rom cm7 ginger dx v17.
So my problem is that i had have forgotten to back up my 2.1 update-1 of stock rom and now i want it back.
And after installing these recovery image will i be able to use the SEUS and PC COMPANION for the update/flashing to stock.
And sorry if I mistakenly started this thread as I didn't find any thread or post on this... and bear with my english.....
XGr7078 said:
i have sony ericsson's x10 mini rooted xrecovery installed, unlocked bootloader,custom rom cm7 ginger dx v17.
So my problem is that i had have forgotten to back up my 2.1 update-1 of stock rom and now i want it back.
And after installing these recovery image will i be able to use the SEUS and PC COMPANION for the update/flashing to stock.
And sorry if I mistakenly started this thread as I didn't find any thread or post on this... and bear with my english.....
Click to expand...
Click to collapse
I don't have xrecovery but cwm with na 11 and minicm7 2.1.9 rom, but I don't think you have any trouble in going back to stock rom, because I did it some time ago, just turning off your phone, opening pc companion in your computer, and selecting repair option... then follow the instructions and you'll have your phone with stock rom and kernel again!! but take into account it will remain rooted and with bootloader unlocked...
good luck!!
yomiguy said:
I don't have xrecovery but cwm with na 11 and minicm7 2.1.9 rom, but I don't think you have any trouble in going back to stock rom, because I did it some time ago, just turning off your phone, opening pc companion in your computer, and selecting repair option... then follow the instructions and you'll have your phone with stock rom and kernel again!! but take into account it will remain rooted and with bootloader unlocked...
good luck!!
Click to expand...
Click to collapse
Doesn't work.
Here's the screen shot.
with pc companion did you chose update then repair? try using flashtool if you still have problems with seus
yomiguy said:
I don't have xrecovery but cwm with na 11 and minicm7 2.1.9 rom, but I don't think you have any trouble in going back to stock rom, because I did it some time ago, just turning off your phone, opening pc companion in your computer, and selecting repair option... then follow the instructions and you'll have your phone with stock rom and kernel again!! but take into account it will remain rooted and with bootloader unlocked...
good luck!!
Click to expand...
Click to collapse
demoniacs said:
with pc companion did you chose update then repair? try using flashtool if you still have problems with seus
Click to expand...
Click to collapse
Yes. how to use flashtool. I mean I know how to use but does not know how to repair phone using flashtool..........the option doesn't come up in 0.2.9.1 version.....
but thanks n.e.way
XGr7078 said:
Doesn't work.
Here's the screen shot.
Click to expand...
Click to collapse
ohh!! that's strange!! i'm afraid i cant help then... try asking in matmutan faq...
good luck!!
Hi!
I flashed my X10a using Feralab rom and DomKernel V6 and everything is ok. However, I have to take my X10 to the repairing center because of an old problem in touchscreen. So, I'd like to know how to flash back my X10 with original Sony Ericsson rom and Sony Ericsson Kernel. Where can I find this rom and kernel?
Thanks!
Go look in flashtool thread you will find out ftf files... Download one for your region.... And flash through flashtool
Sent from my X10
Download the original 2.3 release from SE (or rather only S;-) ) install it through PC companion. It will wipe everything though. If you do a backup of your current rom, you can root your phone when you get it back and restore the backup.
Sent from my X10 using xda premium
leopsc said:
Hi!
I flashed my X10a using Feralab rom and DomKernel V6 and everything is ok. However, I have to take my X10 to the repairing center because of an old problem in touchscreen. So, I'd like to know how to flash back my X10 with original Sony Ericsson rom and Sony Ericsson Kernel. Where can I find this rom and kernel?
Thanks!
Click to expand...
Click to collapse
Just use the repair mode in SEUS or PC companion
Ok. Thanks but, will it recovery the original kernel as well? Because I have a backup of the firmware (rom), provided by xRecovery, and when I recovered it, the DomKerel still there..
leopsc said:
Ok. Thanks but, will it recovery the original kernel as well? Because I have a backup of the firmware (rom), provided by xRecovery, and when I recovered it, the DomKerel still there..
Click to expand...
Click to collapse
dont worry kernel will also be stock one
Thanks again, but I tried to use the SEUS and PC Companion. However, both are saying that I've already have the most recent software and I cannot do nothing more. I'm desperate.. I have to leave home and take my X10 tho the repairing center in 1h but I cannot recovery this.. The rom is already recovered, but the kernel no..
What can I do?
Thank you a lot!
try restore mode in it.
If not then there are generic 2.3.3 or 2.1 files in thread flash them through flashtool
kernel are included in them
sorry the only working link I found was for x10i ....
leopsc said:
Thanks again, but I tried to use the SEUS and PC Companion. However, both are saying that I've already have the most recent software and I cannot do nothing more. I'm desperate.. I have to leave home and take my X10 tho the repairing center in 1h but I cannot recovery this.. The rom is already recovered, but the kernel no..
What can I do?
Thank you a lot!
Click to expand...
Click to collapse
Yeah. Flash this ROM via flashtool and after that You will be able to use SEUS, because it's android 2.1
Thanks for everybody! I downloaded a generic firmware and flashed this using Flashtool. Now, both kernel and rom are in the original SE.
Thank you a lot!
glad to hear