Hello. I got SE X10 rooted.
Android version: 2.3.5
Basaband ver: 2.1.71
Mod version: ZMOD
Build number: CM7-ZDZIMU-MOD
I rooted & install xRecovery by this guide: http://forum.xda-developers.com/showthread.php?t=1196421
And i using this ROM: http://forum.xda-developers.com/showthread.php?t=1213843
Now i need get phone to STOCK firmware. I forgot to backup original FW. I tried PC Companion and it's not work.
My SI: 1232-2950
just SEUS it or flash this:
http://forum.xda-developers.com/showthread.php?t=1192152
I need fully STOCK FW without xRecovery to send mobile back to shop.
Arnold.Alexius said:
just SEUS it
Click to expand...
Click to collapse
Did you try SEUS???
Svesik said:
I need fully STOCK FW without xRecovery to send mobile back to shop.
Click to expand...
Click to collapse
Just flash it with stock firmware. Stock firmware are here:
http://forum.xda-developers.com/showthread.php?t=936733
I just did it and my phone is back to factory state.
SEUS or flashtool
Related
I am having a CyanogenMod ROM installed on my Xperia X10. How can I uninstall xRecovery, unroot my X10 and get the original firmware from Sony?
rjoshicool said:
I am having a CyanogenMod ROM installed on my Xperia X10. How can I uninstall xRecovery, unroot my X10 and get the original firmware from Sony?
Click to expand...
Click to collapse
run SEUS???
Flash the Stock Rom with Flash tool .2.8
http://forum.xda-developers.com/showthread.php?t=920746
Will running SEUS do it all?
From where can I get the stock ROM? I am from India and need to Flash the original Indian stock ROM
Use X10i Generic
Generic version 2.1update1 build 2.1.A.0.435 !
I dont think there's any special difference ?
Thanks! Also I checked on a thread here: http://forum.xda-developers.com/showthread.php?t=975692 In the first reply, it is mentioned that a repair from SEUS will do the trick. Can this be done?
yes, it can do the trick too
Hi,
I'm wondering how to change the phone's smallbandversion, because I just wanted to install the rom from
http://forum.xda-developers.com/showthread.php?t=1041099
The Dev means, that I need Smallbandversion: M76XX-TSNCJOLYM-53404015. But I just have Smallbandversion: M76XX-TSNCJOLYM-53404006.
How can I fix that?
Thanks,
newpipe
Phone:
SE X10 mini pro
Modell: U20i
Firmware-Version: 2.1-update1
Baseband-Version: M76XX-TSNCJOLYM-53404006
Kernel: 2.6.29
Build-Number: 2.0.A.0.504
You must use Seus (SE-Flashtool) to upgrade your firmware. You will lost all data, please backup first.
Mozart40 said:
You must use Seus (SE-Flashtool) to upgrade your firmware. You will lost all data, please backup first.
Click to expand...
Click to collapse
Yes, that's true, you basically should update you phone to 2.1.1.A.0.6, that includes baseband 015, take a look right here http://forum.xda-developers.com/showthread.php?t=983976
D4rKn3sSyS said:
you basically should update you phone to 2.1.1.A.0.6, that includes baseband 015, take a look right here http://forum.xda-developers.com/showthread.php?t=983976
Click to expand...
Click to collapse
Thanks a lot! I want to try flashing "Baseband 006 - kernel 2.0.2.A.0.24" with FlashTool.
newpipe
Hi all,
If i change my baseband through the flashtool, would it go back to the original baseband if i did a repair in seus or will it stay with the baseband i have flashed?
edit: Come on guys please reply. I need to know ASAP
xperiax10mods said:
Hi all,
If i change my baseband through the flashtool, would it go back to the original baseband if i did a repair in seus or will it stay with the baseband i have flashed?
edit: Come on guys please reply. I need to know ASAP
Click to expand...
Click to collapse
this thread will be useful : http://forum.xda-developers.com/showthread.php?t=928343
yes you can go back to your original bb, via SEUS, basically SEUS flashes your phone to SE version of Android 2.1, it goes back to stock...
or just flash back to your previous bb using the flashtool
regencyhood said:
this thread will be useful : http://forum.xda-developers.com/showthread.php?t=928343
yes you can go back to your original bb, via SEUS, basically SEUS flashes your phone to SE version of Android 2.1, it goes back to stock...
or just flash back to your previous bb using the flashtool
Click to expand...
Click to collapse
Thanks man, your the best.
i've hit the thanks button for you
I have a X10a root stock 2.3.3 with xcovery installed. Now I want to unroot
and uninstall xcovery. Can I just flash it with the stock firmware
x10a_3.01.G.0.75_AMERICA-US GENERIC 1233-8200 it will do or I have
to do anyrhing else?
Just flash your phone. Doing so will lose xrecovery, root and it will wipe all your data on the phone.
Yes. Otherwise just connect it to SEUS. It will be back as original.
Candy[MAN] said:
Just flash your phone. Doing so will lose xrecovery, root and it will wipe all your data on the phone.
Click to expand...
Click to collapse
Thanks,
I flashed it with the generic x10a firmware, it was back to
normal but I had problem with installed Vietnamse keyboard so I
flashed it with the generic X10i global firmware. Now everything works O.K
Thanks again, I have learned so much from this forums.
briandang98 said:
Thanks,
I flashed it with the generic x10a firmware, it was back to
normal but I had problem with installed Vietnamse keyboard so I
flashed it with the generic X10i global firmware. Now everything works O.K
Thanks again, I have learned so much from this forums.
Click to expand...
Click to collapse
Hi,
may I know, do you use "Flashtool"? from this thread "[TOOL] [UPDATE 14/08/2011] Flashtool version 0.3.0.0 (Sources now on github)"
Thanks,
Johan
No, I use flashtool 0.2.91
x10I Help Needed .
I flash X10 to 2.3.3 or 2.3.4,bb 71,my phone will often reboot .
But i use 67 or other baseband will not reboot.
Please tell me why it is like that?
T.T........................
2.3.3 only works on bb .71 no other bb will work
restore with pc companion for getting stock SE rom
What I mean is that i flash 2.1 ,other bb,X10 was OK
But 2.3,bb71 will often reboot.
tracyzhen1202 said:
What I mean is that i flash 2.1 ,other bb,X10 was OK
But 2.3,bb71 will often reboot.
Click to expand...
Click to collapse
what are you flaashing??
and try to restore by SEUS or pc companion and try reflashing
I try to restore by SEUS or pc companion,but the problem is not resolved.
2.1 ,other bb,X10 was OK
did you try flashing generic 2.3.3 firmware by flashtool?
yes i try,but ......
then sorry I have no ideas...
go to 2.1
-root and install xrecovery through newest flashtool
-download wolfs 2.3.3 rom and bb .71 from his thread
-put rom in sd card
-reboot into xrecovery then wipe data cache
-install the rom
DONT REBOOT NOW
take the battery out and then open flashtool and put phone in flash mode
flash the baseband from flashtool
now you can reboot
I hope this helps
Flash global generic 2.3.3.ftf with flashtool
Sent from my X10 using XDA
Thank u , i flash many version of the 2.3.3 with flashtool,but always reboot.
i flash 2.1 everything is fine,I do not know why it is so.
tracyzhen1202 said:
Thank u , i flash many version of the 2.3.3 with flashtool,but always reboot.
i flash 2.1 everything is fine,I do not know why it is so.
Click to expand...
Click to collapse
did you try flashing the way i suggested 2 posts before?
yes,... each of these methods i have tried.
I think this is probably the baseband problems
tracyzhen1202 said:
yes,... each of these methods i have tried.
I think this is probably the baseband problems
Click to expand...
Click to collapse
here is the collection of baseband http://forum.xda-developers.com/showthread.php?t=960527
if u dont have urs
just flash ur default baseband
thats the only way
or u can have .71 baseband just flash the custom roms.....
thank u very much.
my phone is X10I,Locked bootloaders.
can i flash 2.0.72 baseband?
Nobody???
I flash 2.1,other bb,everything is fine.
but i found the battery overheating will reboot
..............