I'm on the Community Rom V1.3 (flashed kernel in the v1.2 patch) and am having problems with my music quality. Any time I run anything or touch the screen while listening to music (via Pandora or my music app) the quality is poor. The music has a "popping", "skipping" or "staticy" sound.
I've attempted to flash older kernels as some have said it's an issue with Voodoo Kernel Version 8. Older kernels did not help.
I also, via Voltage Controll App, attempted to switch to CFQ and BFQ scheduler. That did not help either.
Has anyone experienced this issue? Perhaps there are other resolutions?
skindler24 said:
I'm on the Community Rom V1.3 (flashed kernel in the v1.2 patch) and am having problems with my music quality. Any time I run anything or touch the screen while listening to music (via Pandora or my music app) the quality is poor. The music has a "popping", "skipping" or "staticy" sound.
I've attempted to flash older kernels as some have said it's an issue with Voodoo Kernel Version 8. Older kernels did not help.
I also, via Voltage Controll App, attempted to switch to CFQ and BFQ scheduler. That did not help either.
Has anyone experienced this issue? Perhaps there are other resolutions?
Click to expand...
Click to collapse
The typical hack, work around for latency problems is basically not slowing down whenever possible. eg, disable the minimum 100MHz state, if that is not enough then disable 200MHz also.
beray5 said:
The typical hack, work around for latency problems is basically not slowing down whenever possible. eg, disable the minimum 100MHz state, if that is not enough then disable 200MHz also.
Click to expand...
Click to collapse
Should I slow it down even more if at 200MHz I still experience the same problems?
skindler24 said:
Should I slow it down even more if at 200MHz I still experience the same problems?
Click to expand...
Click to collapse
It is up to you to decide how much is enough.
beray5 said:
It is up to you to decide how much is enough.
Click to expand...
Click to collapse
I'm sorry to say that didn't work. And I slowed it down to 1000MHz.
skindler24 said:
I'm sorry to say that didn't work. And I slowed it down to 1000MHz.
Click to expand...
Click to collapse
Are you disabling your overclock back to default 1000MHz? Or are you speeding up the phone by removing 100MHz and/or 200MHz states?
beray5 said:
Are you disabling your overclock back to default 1000MHz? Or are you speeding up the phone by removing 100MHz and/or 200MHz states?
Click to expand...
Click to collapse
The latter. I am pulling up the "States" tab at the bottom of the home screen and unchecking (or removing) the 100MHz, 200MHz, etc. boxes.
skindler24 said:
The latter. I am pulling up the "States" tab at the bottom of the home screen and unchecking (or removing) the 100MHz, 200MHz, etc. boxes.
Click to expand...
Click to collapse
Ok there's one more thing you can try improving latency response, but make sure you are already had other latency dependent parameters corrected (CFQ only, no more or less than 5 freq states being used, removing bottom 100MHz).
Install this -> https://market.android.com/details?id=com.sdincrease.it
Use it to change your cache setting to find the setting most optimal in reducing crackles and pops. Note - too little does nothing, too BIG or too HUGE can exaggerate latency problems.
beray5 said:
Ok there's one more thing you can try improving latency response, but make sure you are already had other latency dependent parameters corrected (CFQ only, no more or less than 5 freq states being used, removing bottom 100MHz).
Install this -> https://market.android.com/details?id=com.sdincrease.it
Use it to change your cache setting to find the setting most optimal in reducing crackles and pops. Note - too little does nothing, too BIG or too HUGE can exaggerate latency problems.
Click to expand...
Click to collapse
Still popping, sigh.
Sent from my SCH-I500 using XDA Premium App
skindler24 said:
Still popping, sigh.
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
I was on comm rom playing with its latency until version 1.2 then I switched to Evil Fascinate 3.51 because it was easier on my eyes. Why don't you try it? There's zero skips, crackles, pops in anything I play.
What scheduler are you running? Have you tried changing it?
Have you undervolted at all? Try going back to stock voltages.
As a last resort, try flashing a different kernel into your setup (such as PB&J or JTs) and see if the problem persists.
beray5 said:
I was on comm rom playing with its latency until version 1.2 then I switched to Evil Fascinate 3.51 because it was easier on my eyes. Why don't you try it? There's zero skips, crackles, pops in anything I play.
Click to expand...
Click to collapse
I'm a fan of evil fascinate. Thanks, beray5.
Sent from my SCH-I500 using XDA Premium App
I was having the same issue, but now it's gone. Make sure you have the latest voodoo control app from the market.
There's another thread on this popping issue where the op had been in touch with supercurio and shared a partial fix, I suspect it's been updated since I last looked.
Sent from my SCH-I500 using XDA Premium App
That was my thread. It's called sound popping in the General thread. I just reverted to DL09 and OTA to EA28 and to ED03 to try to fix signal issues by esn swapping. On this stock rom, I still here popping but its not nearly as prevalent and doesn't occur when I touch the screen. Supercurio mentioned that the sound drivers were poorly implemented on Froyo kernels so it might take awhile for this to be addressed.
Sent from my SCH-I500 using XDA Premium App
I had this problem, and after tons of testing i have found that the ONLY way to fix it is by doing the full eb01 odin. Odining to eb01 gets rid of this completely. DL09 may work (i havent checked), but after doing the update.zip to ed01 it always comes back.
bmeek said:
I was having the same issue, but now it's gone. Make sure you have the latest voodoo control app from the market.
There's another thread on this popping issue where the op had been in touch with supercurio and shared a partial fix, I suspect it's been updated since I last looked.
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
I have what I believe to be the latest voodoo control app but don't know how to use it to help my issue. I still hear the popping on Evil Fasication v3.5.1.
Any help here is greatly appreciated.
weird popping sickness, once contracted, spans kernels and roms
skindler24 said:
I have what I believe to be the latest voodoo control app but don't know how to use it to help my issue. I still hear the popping on Evil Fasication v3.5.1.
Any help here is greatly appreciated.
Click to expand...
Click to collapse
skindler24, did you recently experiment with CM7 from kaos or jt? I'm not sure what's going on here, but thefunkbot's post that a "full odin" fixed it for him is similar to my experience (although I reverted to di01 to initiate an OTA update, not a full EB01 as shared by thefunkbot). Check out zacisblack's thread in Fascinate General for more details.
Perhaps some developer here with more knowledge than I could consider why an issue like this that seems to affect multiple kernels and roms might be (inadvertently) eradicated by a repartitioning / full odin reflash.
good luck with it...
bmeek said:
skindler24, did you recently experiment with CM7 from kaos or jt? I'm not sure what's going on here, but thefunkbot's post that a "full odin" fixed it for him is similar to my experience (although I reverted to di01 to initiate an OTA update, not a full EB01 as shared by thefunkbot). Check out zacisblack's thread in Fascinate General for more details.
Perhaps some developer here with more knowledge than I could consider why an issue like this that seems to affect multiple kernels and roms might be (inadvertently) eradicated by a repartitioning / full odin reflash.
good luck with it...
Click to expand...
Click to collapse
Odin back to stock worked. Problem solved!
Sent from my SCH-I500 using XDA Premium App
Related
After trying a bunch of different ROMs over the last year or so, I can honestly say that PWGB 2.0b3 is the one that comes closest to perfection for me. The only thing I'm missing (as I'm aware a lot of PWGB users are) is a Voodoo kernel. Specifically, I am dying without Voodoo sound and the Voodoo Control app from supercurio.
Has anyone tried the 'Voodoo Control Plus' paid app on this ROM yet? I will purchase it today if someone can tell me whether or not it will work with the current kernel that comes with PWGB.
Phrank
App works great, I have been using this rom and kernel with no issues.
Sent from my SCH-I500 using xda premium
It works fine
Thanks for the quick reply! I've purchased and installed the Voodoo Control Plus app and it's working great! So nice to have that clarity and volume back once again! Kudos to supercurio for making the SGS phones simply awesome, and the best audio experience, hands down!
Phrank916 said:
After trying a bunch of different ROMs over the last year or so, I can honestly say that PWGB 2.0b3 is the one that comes closest to perfection for me. The only thing I'm missing (as I'm aware a lot of PWGB users are) is a Voodoo kernel. Specifically, I am dying without Voodoo sound and the Voodoo Control app from supercurio.
Has anyone tried the 'Voodoo Control Plus' paid app on this ROM yet? I will purchase it today if someone can tell me whether or not it will work with the current kernel that comes with PWGB.
Phrank
Click to expand...
Click to collapse
it will work, it can load the voodoo sound control module without you having a custom kernel, im using it as we speak
Just be sure to set "Recording Preset" to Original if you plan on recording video. For me at least, it won't record audio on the Balanced setting (which it sets to automatically as its the default). Havent tried it with the other settings, since setting to back to Original fixed audio recording for me.
Sent from my SCH-I500 using Tapatalk
This works on stock kernel?
Works on both stock and the two new voodoo kernels. One by ccampos himself. Like stated by splashattach make sure "recording present" is set to original. Otherwise there will be no sound in video.
Sent from my SCH-I500 using xda premium
Fine, I'll say it:
THIS BELONGS IN THE Q&A SECTION.
Please kindly take some time to re-familiarize yourself with the posting guidelines.
Mods, please move thread when time permits.
Hi guys! I have 2 topics and some questions about it, so here we go!
I am on stock firmware (XXBLFB), unbranded and rooted with CF-root, stock kernel as well.
1. How to control the CPU on the SGSIII?
Wake up from sleep is pretty long compared to other phones, usually takes 1-2secs. I guess thats because of the slow scaling of the CPU?
Plus, i've run CPU spy for a few days to see what clocks are used most and found out that the phone often uses 800mhz when its awake. In 2nd place is 500mhz, and only 3rd place is 1400mhz. I guess that results in the lags i sometimes experience when swiping the homescreens. Sometimes its 100% smooth (1,4ghz) but when i swipe really fast or after exiting an app it lags around (guess thats when the cpu is only on 800mhz). Note that I have energy saving turned off!
So what i'm looking for is a Kernel and an app or script that controls the governor (also what governor would solve my issues, on my DHD i usually used ondemand or smartass, are they available on the SGSIII?) and clockspeed (i wanna try how the phone performs with 1.2ghz).
I heard Siyah kernel does this pretty well?
2. So my 2nd question is, how will the phone behave when an OTA comes around and i have it rooted/modified? I changed some sound files, and lets asume kernel/cpu settings.
-Would i be able to still get OTAs?
-Would i run into any problems or will the modified files just be overwritten with the new ones?
-Would i still be able to reroot my phone after upgrading or should i use OTA root keeper?
Thx in advance and keep on rocking
clouds5 said:
Hi guys! I have 2 topics and some questions about it, so here we go!
I am on stock firmware (XXBLFB), unbranded and rooted with CF-root, stock kernel as well.
1. How to control the CPU on the SGSIII?
Wake up from sleep is pretty long compared to other phones, usually takes 1-2secs. I guess thats because of the slow scaling of the CPU?
Plus, i've run CPU spy for a few days to see what clocks are used most and found out that the phone often uses 800mhz when its awake. In 2nd place is 500mhz, and only 3rd place is 1400mhz. I guess that results in the lags i sometimes experience when swiping the homescreens. Sometimes its 100% smooth (1,4ghz) but when i swipe really fast or after exiting an app it lags around (guess thats when the cpu is only on 800mhz). Note that I have energy saving turned off!
So what i'm looking for is a Kernel and an app or script that controls the governor (also what governor would solve my issues, on my DHD i usually used ondemand or smartass, are they available on the SGSIII?) and clockspeed (i wanna try how the phone performs with 1.2ghz).
I heard Siyah kernel does this pretty well?
2. So my 2nd question is, how will the phone behave when an OTA comes around and i have it rooted/modified? I changed some sound files, and lets asume kernel/cpu settings.
-Would i be able to still get OTAs?
-Would i run into any problems or will the modified files just be overwritten with the new ones?
-Would i still be able to reroot my phone after upgrading or should i use OTA root keeper?
Thx in advance and keep on rocking
Click to expand...
Click to collapse
1. Yup, you can try siyah for both cpu amd gpu control
2. You probably might not get ota if you are running custom roms or kernel unless the rom supports it..you mostly will have to update manually via odin.. modified files will be overwritten.. amd yes you can reroot your phone using cf root again..or you can flash the new stock firmware via mobile odin which allows you to keep root even after flashing by keeping everoot option ticked
Sent from my GT-I9300 using xda premium
Chillz88 said:
You probably might not get ota if you are running custom roms or kernel unless the rom supports it
Click to expand...
Click to collapse
Thx for your answer
so as long as i stay on stock rom/kernel i should be fine for OTAs, no matter what i modify in the stock rom? I mean stuff like sound files or Framework mods or CRT animations?
No OTA if custom /rooted .
Why use official updates join XDA and flash stock before OTA arrives .
jje
yeah i know but i'm looking for something that keeps my data/settings. I'm not in the mood for setting everything up again after flashing a rom atm
clouds5 said:
yeah i know but i'm looking for something that keeps my data/settings. I'm not in the mood for setting everything up again after flashing a rom atm
Click to expand...
Click to collapse
You will have to root your phone for crt and mods like that.. so your ota updates wont be successfully updated to your phone.. tho it mite let you know if an update is there.. but wont be successfull...
Sent from my GT-I9300 using xda premium
WHEN POSTING IN THIS THREAD:
DO NOT SPAM
ONLY POST QUESTIONS YOU HAVE REGARDING ISSUES YOU DO NOT SEE IN THIS FAQ
"Q" and "A" SOLUTIONS THAT SHOULD BE INCLUDED IN THIS THREAD
ISSUES WITH CURRENT SOLUTIONS IN THIS THREAD THAT DIDN'T SOLVE A PROBLEM
OR ANY QUESTIONS YOU HAVE REGARDING CM10.1 ITSELF! I HOPE TO FILL THIS THREAD UP WITH MANY MORE Q AND A SOLUTIONS TO HELP OTHER USERS AND DECREASE UNNECESSARY POSTS IN DEVELOPER SECTIONS! IF YOU CAN CONTRIBUTE: PLEASE FEEL FREE TO DO SO!
-------------------------------------------------------------------------------------------------------
Q: I flashed CM10.1 but my GPS won't lock. Is there a solution?
A: Absolutely!
(Optional) Use TitaniumBackup to backup your apps+data
Use Recovery to Backup your current state (System, Data, Boot)
Flash a Sense ROM of any kind (I use MeanBean)
(Don't forget to do your wipes, of course)
*Once booted into a Sense ROM*
Make sure your GPS is turned ON and open up Google Maps
Wait for your GPS to lock
Reboot into Recovery and Restore your Backup
(Don't forget to do your wipes, of course)
*Once booted back onto your CM10.1*
Make sure GPS is turned ON and open up Google Maps
Your GPS should now lock.
Q: I noticed screen tearing (glitch-like symptoms) on my CM10.1. Is there a solution?
A: Absolutely!
Go into Developer Options
Scroll down to "Disable HW Overlays"
Check the box to disable
Screen tearing is now gone.
NOTE! You will need to do this on each reboot!
Q: Developer Options don't exist on my CM10.1. Is it hidden?
A: Kind of.
Go into About
Scroll all the way down and tap the build 7 times
You will notice a message saying Developer Options was unlocked.
Q: How do I get the Play Store on my CM10X?
A: You'll need to download a compatible GApps (Google Apps
You can find the latest GApps in this thread
Q: Why isn't my WiFi connecting?
A: That issue is usually caused by your router. Simply reset or unplug your router for 15 seconds and try again.
Q: I installed an AOSP kernel and my phone has been rebooting. Why is that?
A: The kernel may not be supported with your current ROM.
Some kernels have a voltage script provided by the builder. Ask the developer if there is one available.
You can also download Kernel Tuner from the Play Store to change voltage.
Q: Voltage? Kernel Tuner? What now...?
A: Within' Kernel Tuner you will want to go into Voltage and use the "All +12.5 mV" which will up the Voltage in all areas. I found that having 192MHz at 900mV will make CM10.1 plenty stable while not affecting battery life significantly. ROM and Kernel may very. Do some Trial and Error to see what is suitable for you
Q: My internal storage says I have less than I really should. Did I ruin my internal SD Card?
A: No. Don't panic.
All you need to do is Wipe your Internal Storage.
Backup your files if you don't want to lose them, of course.
Problem should be solved.
Issue usually occurs when flashing from Sense to AOSP or flashing numerous ROM's in a short period of time.
Q: Where can I find the latest Deck Builds?
A: http://forum.xda-developers.com/showthread.php?t=2110920
You can also check the iRC channel (info in the thread above)
Also, search Google for "CM10 EVO LTE irc" and click the first link
Q: Should I flash Nightly Builds or Deck's Builds?
A: Nightly Builds are official CM builds which don't include all of Deck's maintenance, tweaks, etc... You'll find that Deck's Builds just happen to be more stable.
I feel like this was a waste of time. Lol.
Bump reserve.
CM 10.1 battery life
Delakit said:
I feel like this was a waste of time. Lol.
Bump reserve.
Click to expand...
Click to collapse
I've been using CM 10.1 ever since it first came out .I love it but the only problem i got is the terrible battery life I've been experiencing .It has gotten lot worst over time now my phone barely last a couple of hours per charge.Is there any advice you can give me to get better battery life?
ive done clean and dirty installs to find a solution but still get the same result and i've never use another kernel with the ROM. The best battery life i've experience with my phone was with stock rom when i used to get 24hrs on one charge .i'm seriously thinking about going back to stock but i love CM10.1
PLEASE HELP A BROTHA OUT
hakeem0996 said:
I've been using CM 10.1 ever since it first came out .I love it but the only problem i got is the terrible battery life I've been experiencing .It has gotten lot worst over time now my phone barely last a couple of hours per charge.Is there any advice you can give me to get better battery life?
ive done clean and dirty installs to find a solution but still get the same result and i've never use another kernel with the ROM. The best battery life i've experience with my phone was with stock rom when i used to get 24hrs on one charge .i'm seriously thinking about going back to stock but i love CM10.1
PLEASE HELP A BROTHA OUT
Click to expand...
Click to collapse
That is pretty weird. I had that problem on the EVO 3D before. Were you or are you using any custom kernel, kernel tuner, or scripts at all?
I know, too, that the battery does seem to drain a bit fast at first but then it gets more subtle. MeanBean has been draining me worse than CM10.1 right now.
... Sent from my 'Oops! Should've bought the S3!' via XDA-Developers App.
Delakit said:
That is pretty weird. I had that problem on the EVO 3D before. Were you or are you using any custom kernel, kernel tuner, or scripts at all?
I know, too, that the battery does seem to drain a bit fast at first but then it gets more subtle. MeanBean has been draining me worse than CM10.1 right now.
... Sent from my 'Oops! Should've bought the S3!' via XDA-Developers App.
Click to expand...
Click to collapse
Im not using anything extra,just the ROM as is . Also tried MeanBean got about 5 to 6 hours on one charge but still isnt anywhere close to 24 hrs on one charge with stock ROm
hakeem0996 said:
Im not using anything extra,just the ROM as is . Also tried MeanBean got about 5 to 6 hours on one charge but still isnt anywhere close to 24 hrs on one charge with stock ROm
Click to expand...
Click to collapse
MeanBean has never treated me well on battery life no matter what I do. Not on my replacement anyway. On my other LTEvo it was working great. But... CM10.1's battery life shouldn't be that bad. Could always use Kernel Tuner to manage the CPU and Gov. a bit. Trial and error until you find a satisfied combination. I generally use Ondemand as opposed the interactive. I noticed Ondemand gave me better battery life. Haven't done much with the CPU speeds in a while so I'm not going to be too much help there... I also use System Panel to monitor apps, system, memory, and use its built-in task killer.
Delakit said:
MeanBean has never treated me well on battery life no matter what I do. Not on my replacement anyway. On my other LTEvo it was working great. But... CM10.1's battery life shouldn't be that bad. Could always use Kernel Tuner to manage the CPU and Gov. a bit. Trial and error until you find a satisfied combination. I generally use Ondemand as opposed the interactive. I noticed Ondemand gave me better battery life. Haven't done much with the CPU speeds in a while so I'm not going to be too much help there... I also use System Panel to monitor apps, system, memory, and use its built-in task killer.
Click to expand...
Click to collapse
ill give it a try.thanks
How to disable shutter sound?
In older versions of CM there used to be an option in system settings to disable the shutter sound in the camera app. I can't seem to find any options either in the camera settings or in the system settings for this in CM10.1. Anyone know if this is there or not? Or is it coming in a future version?
---------- Post added at 03:58 PM ---------- Previous post was at 03:51 PM ----------
hakeem0996 said:
ill give it a try.thanks
Click to expand...
Click to collapse
I had some trouble with apps wakelocking (for lack of a better word) when I first installed CM10.1. You can identify some of those with the wakelock detector app.
https://play.google.com/store/apps/details?id=com.uzumapps.wakelockdetector
Thanks for putting this post together. I have always used Sense but have been wanting to try a CM10.1 ROM. This information is very helpful.
A question that I have is what bugs or issues are currently associated with CM10.1? Most of the CM10.1 ROMs under Bug List say "Any bugs currently in latest CM10.1." Is there a centralized place that lists all of the issues? Thanks.
1TonyC said:
Thanks for putting this post together. I have always used Sense but have been wanting to try a CM10.1 ROM. This information is very helpful.
A question that I have is what bugs or issues are currently associated with CM10.1? Most of the CM10.1 ROMs under Bug List say "Any bugs currently in latest CM10.1." Is there a centralized place that lists all of the issues? Thanks.
Click to expand...
Click to collapse
The only thing I noticed going wrong was my background will occasionally disappear (go black). Sometimes it will pulsate or strobe. Only happens when I sleep the phone while in Messages, and wake the phone. After unlocking, the background will either be black, be black for a while and all of the sudden pop my background image back up, or just act normal. I have no customizations or anything so I'm not sure why this occurs. Otherwise, the Vertical orientation option for the App Drawer is still messy as it always has been. That's all I've noticed but I haven't tested the music player yet .
... Sent from my 'Oops! Should've bought the S3!' via XDA-Developers App.
nebhead said:
In older versions of CM there used to be an option in system settings to disable the shutter sound in the camera app. I can't seem to find any options either in the camera settings or in the system settings for this in CM10.1. Anyone know if this is there or not? Or is it coming in a future version?
---------- Post added at 03:58 PM ---------- Previous post was at 03:51 PM ----------
I had some trouble with apps wakelocking (for lack of a better word) when I first installed CM10.1. You can identify some of those with the wakelock detector app.
https://play.google.com/store/apps/details?id=com.uzumapps.wakelockdetector
Click to expand...
Click to collapse
Power Shutter? If so, that's in the Camera app settings. Click the bottom-right screen-button and choose the bottom-center settings screen-button. I also have apps that'll randomly open when I wake the phone but I figured that was just because of the phone being in my pocket, turning on, and going to the app. It will open to the clock.
... Sent from my 'Oops! Should've bought the S3!' via XDA-Developers App.
Delakit said:
Power Shutter? If so, that's in the Camera app settings. Click the bottom-right screen-button and choose the bottom-center settings screen-button. I also have apps that'll randomly open when I wake the phone but I figured that was just because of the phone being in my pocket, turning on, and going to the app. It will open to the clock.
... Sent from my 'Oops! Should've bought the S3!' via XDA-Developers App.
Click to expand...
Click to collapse
Actually, not referring to Power-Shutter. I'm referring to the actual sound that is made when you take a photo. It's a bit jarring/annoying to have it "dleep!" when I take photos. Back in CM7 I remember that we could turn that sound off.
Delakit said:
I feel like this was a waste of time. Lol.
Bump reserve.
Click to expand...
Click to collapse
Any source of info or attempt to help folks that either dont know or cant figure things out on their own is never a waste of time bro. Thanks
*Information IS the most dangerous weapon of all*
nebhead said:
Actually, not referring to Power-Shutter. I'm referring to the actual sound that is made when you take a photo. It's a bit jarring/annoying to have it "dleep!" when I take photos. Back in CM7 I remember that we could turn that sound off.
Click to expand...
Click to collapse
I looked everywhere and couldn't find an option. I really don't have the time to dig further into the actual coding either, unfortunately.
Delakit said:
I looked everywhere and couldn't find an option. I really don't have the time to dig further into the actual coding either, unfortunately.
Click to expand...
Click to collapse
Thanks for trying. If anyone else knows or has time to check it would be greatly appreciated.
only issue ive been getting since the 4/13 buld and as well as the 4/16 build is my phone fcs when someone calls. really annoying. especially since not even running a kernel only stock . and have done a few full wipes and clean installs. been diving me nuts
kaos420 said:
only issue ive been getting since the 4/13 buld and as well as the 4/16 build is my phone fcs when someone calls. really annoying. especially since not even running a kernel only stock . and have done a few full wipes and clean installs. been diving me nuts
Click to expand...
Click to collapse
Odd. Never had that issue before. Bad download?
Sent from my EVO using xda app-developers app
When I flashed CM 10.1 the only thing that worked was power button and volume. The screen was unresponsive, my bootloader is unlocked and I'm s-off hboot 2.09
Sent from my EVO using xda premium
WOLF26915 said:
When I flashed CM 10.1 the only thing that worked was power button and volume. The screen was unresponsive, my bootloader is unlocked and I'm s-off hboot 2.09
Sent from my EVO using xda premium
Click to expand...
Click to collapse
And as you'll find stated numerous times: the latest touchpanel firmware isn't yet supported with most, if not all, AOSP ROM's. S-OFF, which will make you downgrade, and you'll be able to use your AOSP ROM's. And then you can update to the latest firmware minus the tp update.
... Sent from my 'Oops! Should've bought the S3!' via XDA-Developers App.
I have search in the original thread but no answer there. I just installed Carbon-Mackay rom on my 7510 and everything is running fine (I had to change the performance profile to "performance" in order to get it to run smooth).
My problem come that when I try to take a class in Duolingo everything work fine except for the exercises where you are dictated a sentence. Sound effects work but the dictation of phrases doesn't. These didn't happen with the stock rom.
Any ideas?
Hey, you do know that performance profile locks your CPU to 1ghz or whatever you set as the highest right? It means your tab will be smoking hot if you use it for more than 10 mins. I would suggest using interactive instead.
About your problem, I don't know because I don't even know what's duolingo.
Sent from my GT-P7500 using Tapatalk HD
eushaun99 said:
Hey, you do know that performance profile locks your CPU to 1ghz or whatever you set as the highest right? It means your tab will be smoking hot if you use it for more than 10 mins. I would suggest using interactive instead.
About your problem, I don't know because I don't even know what's duolingo.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Indeed, that was my error. Luckly the rom automatically changed the performance profile. I fixed by problem by installing a pure CM 10.1.
Thanks anyway.
After carefully following the flash guide by droidstyle posted here: Guide: Installing a Rom/CWM Recovery/Root or Going Back to Stock, I was able to load the Super Nexus ROM successfully and fix any minor quibbles I had with apps, settings, etc.
However, there is one error that I can not fix, and it's this battery glitch:
Has anyone seen this before? Will it ever go away?
(FYI: This happens every time I power down the phone and attempt to charge it.)
SimplyShane said:
After carefully following the flash guide by droidstyle posted here: Guide: Installing a Rom/CWM Recovery/Root or Going Back to Stock, I was able to load the Super Nexus ROM successfully and fix any minor quibbles I had with apps, settings, etc.
However, there is one error that I can not fix, and it's this battery glitch:
Has anyone seen this before? Will it ever go away?
(FYI: This happens every time I power down the phone and attempt to charge it.)
Click to expand...
Click to collapse
yes,,, quit press the button on the top right (power button) and it will stop the charging animation!! :silly:
that is its normal and built in way to let you know the charger is plugged in and working :good:,,
unless I have missed something?
.
I saw this. This animation is borked in this ROM but it does work properly on cm10.1, helly bean, the usual suspects
Sent from my SCH-I500 using Tapatalk 4
skepticmisfit said:
I saw this. This animation is borked in this ROM but it does work properly on cm10.1, helly bean, the usual suspects
Sent from my SCH-I500 using Tapatalk 4
Click to expand...
Click to collapse
You are right. I have just tried Hellybean and can report that it works perfectly fine with this battery animation.
However, Hellybean presents its own problem and that is with music playback: Left on *all default* settings, this ROM will make the mp3 files stored on my SD card skip or "pop." Trying a different player doesn't help either.
What *does* seem to make a difference is using a few of the "Performance" options listed under this ROM. Setting the CPU Governor to "Smartassv2" and enabling some of the memory options have greatly reduced the occurrence of this random skipping/popping noise.
Still, I'm disappointed that glitches like this go unreported. Stock Gingerbread never had such issues...
SimplyShane said:
You are right. I have just tried Hellybean and can report that it works perfectly fine with this battery animation.
However, Hellybean presents its own problem and that is with music playback: Left on *all default* settings, this ROM will make the mp3 files stored on my SD card skip or "pop." Trying a different player doesn't help either.
What *does* seem to make a difference is using a few of the "Performance" options listed under this ROM. Setting the CPU Governor to "Smartassv2" and enabling some of the memory options have greatly reduced the occurrence of this random skipping/popping noise.
Still, I'm disappointed that glitches like this go unreported. Stock Gingerbread never had such issues...
Click to expand...
Click to collapse
With Hellybean, I have an overclock set up to 1.3 GHz using the Lulzactive governor and the Zen I/O scheduler. I have only had skipping issues when locking the screen, and even then skipping is rare on my end. Try my settings and see how it goes.
Stock gingerbread never had those issues for you, eh? Well skipping was really bad on eh03 for me. In any situation, any music player, it would skip really often. Also, I had skipping issues in cm10.1. The built in kernel is not that good on that ROM.
Sent from my SCH-I500 using Tapatalk 4