Related
Been trying to get my phone to run fully on gingerbread, and have tried the official v20e.kdz flash, as well as Mik_os's CM7, both worked great, and I liked them a lot.
BUT, I can't get my 3G/Data connection to work on either. WiFi works fine, and I can connect to the internet fine that way.
So I am currently flashed back to the gross V10V 2.2.1 Froyo until I can get it figured out. I REALLY want to run CM7, but with no 3G I just can't really use it.
Searches have returned nothing. Any other canadian guys out there with this same problem?
I have a data plan, and I am with Koodo/Telus.
I believe it has something to do with the baseband.
Look here: http://forum.xda-developers.com/showthread.php?t=1217504
Already checked it out, but the V10E image will not work with my phone. I need the V10V image for it to work. Is there a 7z for the V10V platform?
Shofire91 said:
Already checked it out, but the V10E image will not work with my phone. I need the V10V image for it to work. Is there a 7z for the V10V platform?
Click to expand...
Click to collapse
If you want a custom ROM, select one that corresponds to your baseband or switch the baseband. If you do not, you will have no data. That is all to it. End of story.
You can extract the baseband yourself from KDZ archive. http://forum.xda-developers.com/showthread.php?t=901417 (steps 1-2).
All of this covered in the sticky thread.
Got it. Currently have extracted needed files from the uncompressed dz file for my stock ROM. I will be reuploading CM7 and franco's kernel,(Lots of users seem to have luck with it, and I liked it when I ran it for a day) and then flashing my V10V radio and I will let you know!
Edit:
Wait, CM7 currently has a bug so 3G/Data does not work? Shoot! Or am I fixing this by flashing my stock rom's baseband? Will find out soon enough....
And I admit I'm a bit of a noob, I only started doing this last week. I'm learning though.
You need old (v10) baseband
Sent from my LG-P500 using XDA App
dr.notor said:
You need old (v10) baseband
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
No dice. My phone was in its factory state when I began this project. It was rooted, installed AmonRa's custom backup, and I installed DrellisDee's Kernel so I could overclock with 2.2.1 froyo. Was stable at 480/768, but it still wasn't enough.
Nandroid backup, google backup, cleared cache, and dalvik. (Thank your AmonRa!)
Flashed CM7, latest stable release 6.5.7
Flashed franco.Kernel.v1-16082011
Booted up, currently running with no issues. Flashed my V10V baseband using LGMDP v1.5.exe .
No errors, everything went well, battery still at 92%.
Still no internet unless connected to WIFI, Damn. Guess I'm S.O.L. on this one eh?
Thanks for the help guys. Gonna check out some other Ginger ROMs and give them a try to see if I can get ginger to work with my 3G network. Any suggestions? I'm stuck with v10 based ROMs since LG hasn't released any V20 setups for my network.
Off to browse the repository of useful P500 posts sticky.
Have you set up the APNs for your Telco?
IceFragmatic said:
Have you set up the APNs for your Telco?
Click to expand...
Click to collapse
Never thought of that, hmmm, APN's are blank. One second....
GOT IT!!!!! Everything is working, 3G, 2G, wifi, etc.
Of course it was something so simple, haha.
THANKS! Awesome help!
Off to play with my phone for a few hours!
At least it works now.
Yeah, I don't think I can put my phone down now. Definitely enjoying the benefits of CM7. I think I am gonna go make my friend with the galaxy S jealous lol.
Sent from my LG-P500 using XDA App
Shofire91 said:
Been trying to get my phone to run fully on gingerbread, and have tried the official v20e.kdz flash, as well as Mik_os's CM7, both worked great, and I liked them a lot.
BUT, I can't get my 3G/Data connection to work on either. WiFi works fine, and I can connect to the internet fine that way.
So I am currently flashed back to the gross V10V 2.2.1 Froyo until I can get it figured out. I REALLY want to run CM7, but with no 3G I just can't really use it.
Searches have returned nothing. Any other canadian guys out there with this same problem?
I have a data plan, and I am with Koodo/Telus.
Click to expand...
Click to collapse
You can't tell me how you got the phone rooted in the first place can you?
I'm with Koodo and have the Froyo 2.2.1 firmware on there.
I've tried everything I can do to get it rooted, and it just won't!
Gingerbreak says that there is a problem and won't do it.
Superoneclick hangs on step 6 which is mounting the SD card
I tried to grab a v10_G flash which is the telus stock ( I think ) but there was an error while trying to flash with kdz flash ( update error param =2 ).
Can ANYBODY help me to figure this out?
I havd koodo, just last friday I rooted 2 friend's phones with the gingerbreak app from xda thread. I took the second one and at first it didn't work because there were too many dots in the file name, simple as that, took me a while to figure it out, so I renamed to something like gingerbreak1.apk and it worked. For the data not working, just google " koodo apn " then you'll end up with the good apn info wich is simply. " sp.koodo.com " , port = 80, NO proxy as it just slow down the net, the other settings as they already are, 302 and 230 or something like that they come as default near the bottom of apn creation option in mobile options. All other fields leave blank. Hope it works..
Sent from my LG-P500 using Much Love
Mangala_Dharma said:
I havd koodo, just last friday I rooted 2 friend's phones with the gingerbreak app from xda thread. I took the second one and at first it didn't work because there were too many dots in the file name, simple as that, took me a while to figure it out, so I renamed to something like gingerbreak1.apk and it worked. For the data not working, just google " koodo apn " then you'll end up with the good apn info wich is simply. " sp.koodo.com " , port = 80, NO proxy as it just slow down the net, the other settings as they already are, 302 and 230 or something like that they come as default near the bottom of apn creation option in mobile options. All other fields leave blank. Hope it works..
Sent from my LG-P500 using Much Love
Click to expand...
Click to collapse
Thanks for the post...
I decided to install a different version of gingerbreak, and suddenly everything worked so simply...
I have since installed clockworkmod and have done a full back up.
Then I installed cyanomod and everything is up and going.
I was nervous to flash the google apps, but everything is happy.
Oh ya... I did have to update my apn data to the koodo network. I've tested MMS in and out.
You might want to try Andy's Phoenix rom; the fastest one and amazing statusbar. Some light text issues will be fixed the 20th october update. Beside that, the best for me with franco 2.6.35.14 oct. 2 kernel. Anyway, glad you could make it
Sent from my LG-P500 using Much Love
Well I installed this version and 13 As with the wifi does not work, goes on but just does not work online.
Would greatly appreciate any help, and what they tried eh posted but still the same: S. Thanks in advance
Sorry for my English, a translator.
It happened to me too in v13. I updated to the v14 version and fixed it. Don't forget install the Wlan.zip (4.42 MB) (New Wlan Modules) with CWM Recovery!
http://forum.xda-developers.com/showthread.php?t=1201116
Hopefully, that fixes the problem, but don't get too excited
Tried reinstalling, wiping, new wlan modules hotfix etc etc, but the rom refuses to work properly with the wifi. I was able to use the web-browser by telling it which IP to go to, instead of www adresses, but still, the market function and other internet functions won't work.
If I were you, lojoko, I would go for GinTonic, earlier release of MiniCM7 rom or some other rom and wait for MiniCM7 to get fixed again. Hopefully, it will be fixed soon. Love that rom!
Had a really good hunt around for wifi fix. It seems some people get the "Error" when switching on wifi and then it sticks. Had to revert to GinTonic 2.0
i'm having the same issues with v19.
i switched to minicm7 because gingerdx was giving me the same trouble. i'm helpless. In fact i'm thinking about switching back to minicm6(froyo)... Gingerbread is not working for me.
lokinmodar said:
i'm having the same issues with v19.
i switched to minicm7 because gingerdx was giving me the same trouble. i'm helpless. In fact i'm thinking about switching back to minicm6(froyo)... Gingerbread is not working for me.
Click to expand...
Click to collapse
hi,
had the same issue with v19 wifi not working.
then i found out that it worked when the rom v19 was fresh installed, but stopped working after restoring missed apps and all system data with TITANUM backup (backup made on V17)
hope this brings you further with your wifi problem.
onlyime said:
hi,
had the same issue with v19 wifi not working.
then i found out that it worked when the rom v19 was fresh installed, but stopped working after restoring missed apps and all system data with TITANUM backup (backup made on V17)
hope this brings you further with your wifi problem.
Click to expand...
Click to collapse
I'm using fresh SE install from SEUS and wiping everything before installing MiniCM Pro v19. Still having the issues. I don't use any restoration option.
Hey Guys,
Firstly, i have had a look around the forum for this problem but cant seem to find any solution. Maybe mines a bit more specific? If i missed anything please let me know
I had a brend new Xperia Ray which worked fine with the out of the box SE firmware and all that (3g and everything worked great).
I followed the instructions at CM wiki (http://wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Ray:_Full_Update_Guide) and another XDA forum thread (http://forum.xda-developers.com/showthread.php?t=1253112&highlight=ray) to install CM7. It installed fine, but the problem is the CM7 for ray dont seem to have vibrations/mobile data working. There were complains about this on the CM forums.
Im not sure if its the same thing, i have set up the APN's correctly according to vodafone NZ website. But my 3G icon appears on the top notification bar, but no pages load or have any connectivity for some reason.
So i tried to follow MIUI guide (http://forum.xda-developers.com/showthread.php?t=1301406) to install MIUI. i used the basic boot file, flashed, and installed the miui zip file using CWM. again, exactly the same issue. mobile data is enabled, symbol appears on the notification bar ('H' appears instead of 3G sometimes, no idea what that means but iv seen that before on the original rom). atleast vibrating works. But yeah, APN's are setup correctly (http://forum.vodafone.co.nz/topic/6978-htc-desire-android-2-2-3g-settings/). Except i cant seem to find the option "MMS Protocol: Wap 2.0" on the apn though.
I then looked at the bottom of the MIUI guide i linked earlier and it mentioned mugetsu's kernel. So i downloaded the boot.img listed there, used fastboot with it. then copied over the Mugetsu-1.zip to the SD, and used CWM to install it. and straight away i copied over MIUI rom zip file, and installed that too. There wasent very noob friendly guide to doing this, so im hoping i did that right. But again, still no luck. exactly the same as before. No Data, but vibrating works.
I also tried downloading SEMC 4.0.2.A.0.42 from (http://forum.xda-developers.com/showthread.php?t=1285977) and used flashtools to flash that. Then i got the stock SE Xperia Ray UI (im guessing that was the original SE Xperia Ray rom). But even there, i still had no luck with the mobile data.
Can anyone help?
Update:
So i tried messing around a lot yesterday but had no luck. I tried the FXP042/FXP045, new MIUI, newest CM. Had no luck at all for the 3g/mobile data.
But today i saw the new version of FXP046 (http://forum.xda-developers.com/showthread.php?t=1285977). And just installed it. and weirdly enough that seem to do the trick. the 3g/data works.
Now my question is, can someone figure out what the problem was? Because i really like the way MIUI worked, and i want to try install that. I tried installing MIUI with the boot.img that came from FXP046, but that clearly didnt work (wouldn't boot into MIUI). So can anyone suggest anything else i could try?
from what i can see, FXP045 (and older versions) used CM7.1. The new FXP046 seems to have CM7.2. maybe thats what fixed the bug? the new CM? Thoughts?
it might have to do something with baseband version..
I use miui and have both 3g and vibra working.
My baseband version is : 8x55A-AAABQOAZM-20302204-36
Hello to all,
I've been looking on this forum, searched for everything I wanted, and always get an answer, but this time I need to ask some experts here. As the title says the gps don;t want to get fix even on clear sky and without any building around. I used many programs one of it is "gps status" where are shown 0/11 fix, basicaly there are 11 satelites available I believe. I have tried almost all the roms available in the development section but none of them worked, even the cm7. Used another firmware and there is fix to this. If I use the original samsung rom untouched the gps is working normaly. Please let me know what I doing wrong?
Thanks,
GPS Fix for Samsung ACE
Hi. this is a fix for the Samsung Galaxy Ace, this fix reprogram the GPS
this setting program the GPS and allows it to connect in seconds.
you must be root
to install first download the fix
copy Fix GPS ACE.zip to the SD
Reboot into recovery
Flash Fix GPS ACE.zip from recovery
Reboot your phone
GPS is always slow.
Problem not solved with the files I'm wondering if the darktremor's app2sd affects? My app and dalvik cache are on sdext
hello
did you try different modem, this post help me much
http://forum.xda-developers.com/showthread.php?t=1289830&highlight=modem
+ +
Yep many and none working with a custom rom, right now I'm using xwks2 which was installed with official 2.3.5 and working with it, but when I flash a custom rom something is wrong, have no clue what I think I will stick with the samsung rom
Allright instaled now on oficial samsung 2.3.5 rooted, working good, if someone can explain what is wrong when changing the on other rom will be nice
thanks,
Hello
there is little I installed Cyanogen 7.1, with S5830XWKS9 firmware and gps does not work at all, the icon did not appear at all in the status bar.
Then I flashed the modem with another (DXKPD) and everything is back to normal.
here is my experience.
+ +
Hi have 7.2 and mine is not working with aura.
Sent from my GT-S5830 using Tapatalk
try fasterfix from the market.maybe it would help
Well for some reason my gps is working now, what I've done is flashing with odin a multiple file (my chose was a froyo firmware) the I flash with odin the latest ks9 one package file, working great even with cm7.2, got fix in 19 sec for me is great (also using the gps config from http://forum.xda-developers.com/showthread.php?t=1320626
Thanks
Guys before you change the base band and all try Faster fix from the market.. worked for me.. now the gps gets locked in few seconds.. really useful app.. and also I recommend maps v5.8.. most of the time other versions gave me force closes when using navigation.. Hope this helps..
my gps always shoes "your current location is temporarily unavailable"
I've been having this issue for a few days now and I haven't been able to solve it myself. I've been using a GB rom for the past few months (this one and it's always been working fine. Still, I wanted to try ICS so I got myself to install CM9 on the device, and while I was at it, updated the baseband to 72. However, since then, I've been unable to connect to Wifi. I can see Wifi networks, but as soon as I try to connect it gets stuck on "Connecting". I tried flashing other ICS roms and restoring the baseband, nothing works. Yesterday I put the rom back that I've been using succesfully over the past months but still no difference.
When I scan for networks, they appear fine. Reception is good, but as soon as it tries to connect the icon changes to the icon for poor reception. It doesn't matter what network I pick. Other devices running Android have no problem connecting.
Does anyone have an idea what might cause this issue? Is there any way to get a logging of the Wifi to see what exactly goes wrong? Any troubleshooting steps I could take? Your help would be very much appreciated
edit: forgot to mention, with CM9 I used the CM9 kernel, with other roms I use Rage kernel
in exactly the same situation as above, except it was all working just fine until a couple of hours ago. now suddenly the router that's sitting right in front of me, giving full signals has turned into a "poor connection"!!!
i'm on CM9 with CM9 kernel and the recommended baseband
especially suspicious is the facebook application that just got updated when it was working fine a couple of hours or so back. hasn't worked since that update
Backup and try this https://www.dropbox.com/s/s587q1udg2ya2s1/Xperia Mini,LWW,Active_wifi_modules.zip flash in cmw and perform factory reset after that..
If it doesn't work then flash this stock ics ftf http://www.4shared.com/rar/du68FPM-/SK17i_41B0431__1249-7380ftf.html?refurl=d1url via flashtool...
Sent from my WT19i using xda app-developers app
rachit.rc96 said:
Backup and try this https://www.dropbox.com/s/s587q1udg2ya2s1/Xperia Mini,LWW,Active_wifi_modules.zip flash in cmw and perform factory reset after that..
If it doesn't work then flash this stock ics ftf http://www.4shared.com/rar/du68FPM-/SK17i_41B0431__1249-7380ftf.html?refurl=d1url via flashtool...
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
Flashed the Wifi module, did a factory reset and it's connected! Thank you so much :laugh:
my problem solved as well. i didn't read rachit.rc96's reply so i solved it the hard way
was previously on baseband 72, flashed baseband 64 then 72 back again, no luck, went back to gingerbread, rooted then was able to connect to only one of my routers, the other one wasn't even showing up then flashed stock ics rooted that, now able to connect to both routers.
was that a problem with cm9 i wonder. or what?