I just flashed OLYEM_U4_2.1.1 for my Bell Atrix, and the hotspot is enabled, but I can't use my laptop or my i9000 to connect this hotspot, it just keep connecting...scanning...obtaining IP address...disconnected...scanning..
What is wrong with my atrix?
And the GPS seems doesn't work too.
somebody help me...
somebody help me...
havent heard of this error before. im using the same sbf and as far as i can tell everything is working fine.
I know you dont wanna hear this, but how about a factory reset?
I did everything I can, wipe, flash radios, flash u4_1.4.2, but it doesn't get any help.
somebody help me...
It sounds like its a bad encryption passphrase.
I've witnessed bugs in the Wireless tethering on other versions of android.
Couple things you may want to try with tethering turned off:
1. Turn off your Wi-Fi and then enable your wireless tethering(Wi-Fi Hotspot).
2. Turn on your Wi-Fi and then enable your wireless tethering(Wi-Fi Hotspot).
3. After enabling wireless tethering adjust your Wi-Fi hotspot settings. (Perhaps try no encryption or changing the encryption type and/or passphrase)
Related
I have a once rooted (I say once because I'm not sure it still is after doing the OTA updates) that has the APN for tethering. Tethering works fine.
The problem is that when I change the APN back to use AT&T US I don't think the phone is disabling tethering. The reason I think this is because I am running JuiceDefender and it shows that Tether is on. Additionally, the battery life is much shorter than usual and the phone is warm to the touch even when it is just sitting there in standby.
Any ideas on how I can confirm that tethering is indeed still running and/or how I can truly turn it off?
I have tried rebooting the phone, selecting AT&T US Tether (so that I get the message saying that I don't have tethering on my plan) and have tried disabling and re-enabling JuiceDefender.
If you scan for wifi networks does your tether network actually show up?
Nope, I don't see it. It's almost like the phone thinks it needs to keep the cell data connection alive so that it can provide tethering, but without actually providing it.
All of a sudden, I cannot access WPA2 networks on wifi anymore. WEP networks work fine. My school's WEP network conebut when I try to connect to a WPA2 network, here's what happens:
1. phone connects successfully.
2. open browser
3. attempt to load google/yahoo/cnn/bing
4. loading inevitably fails
Does anyone have the same problem? Any proposed fixes?
Wolfbreak's CM ROM. BB58. THANKS!
Hey,
I'm having major problems with wifi on my x10. Yesterday, the phone suddenly couldn't access the internet over my home wifi network, which has a WPA2 personal passphrase. The phone still showed up as connected to the network, but could not get online. I reflashed my x10 with SEUS twice, reformatted my memory card, triple checked my router settings, but no matter what I do, I cannot get WPA2 personal keys to work. WEP keys work perfectly. Does anyone have the same problem? Can anyone help me out?
Baseband .54
Stock Android 2.1
Thanks!
For a lot of custom roms, the ability to automatically connect to WPA- and even some WEP-encrypted networks is a challenge, and not many people seem to know the specific reason for it.
A lot of people have been using a free app from the Market called Blade Wifi Fix, which has mixed results (I haven't had it work for me, but it does for other people).
The fix I use is to disable Wifi, then re-enable it, wait for it to show Disabled on my wifi access point, then choose it and press connect. That usually works for me. But again, that's just for me.
Is it a known Issue with CM7 - 0713 that Wifi hotspot is not working? Devices can connect to it, but can not get an internet connection
Try Barnacle. I had issues with WiFi Tether, but Barnacle worked right out of the box. Just the opposite of my experience on TW.
Yea, barnacle doesn't work either. I am specifically looking for the built in hotspot for Access Point mode.
Barnacle works flawlessly, try disabling the wpa supplicant setting
Sent from my SCH-I500 using XDA App
jstoneky said:
Is it a known Issue with CM7 - 0713 that Wifi hotspot is not working? Devices can connect to it, but can not get an internet connection
Click to expand...
Click to collapse
If you know how to get CM7 into Modem mode, I can give you instructions on how to get the built it Hotspot app to work. I'm currently running MIUI (which is based off of CM7) and am having the same issue. The problem is that you need to get the phone into Modem mode in order to connect your phone to QPST to change a setting that will unlock the Hotspot app.
Does anybody know how to get a Fascinate running CM7/MIUI into Modem mode?
Well, after trying to tether an ASUS Transformer, I see your point. Barnacle does ad hoc rather than AP, so it won't work.
Bump. Also experiencing this problem with MIUI. Has anyone ever come up with a solution?
So I have been tethering via USB my GS2 to my home wireless network.
At any rate, my connection seems to reset every so often and I will have to toggle on/off the usb tethering option on the phone to get things running again
It did not use to behave this way, can you guys think of why this may be?
Thank you, any help is very very appreciated.
Hi all,
I have a problem while connecting to WiFi hotspot feature. I have Feravolt v3 JB rom, Ferakernel.
I am able to activate the Wifi hotspot feature in the phone and its broadcasting fine until I try to connect from my laptop's wireless adapter. The SSID is detected in the wireless networks and when i try to connect, it acquires the ip address and as soon as I get the message 'wireless connected', the phone LED color changes and the phone reboots. I tried both pdanet+ and also the hotspot feature in the rom. both times the phone restarts. I did factory reset and tested hotspot feature before installing any other apps. still the same result. I also tried keeping the phone charged while connecting to hotspot. No luck. I am able to do usb tethering, reverse tethering without any problem. I did not overclock. Just using default settings that came with the rom. disabled sleep policy, kept the screen always on......
My only guess is that might be battery problem and if so any idea how to overcome this problem without buying a new battery.
Anyone had similar problem before or its a first?
Appreciate if someone can guide me if I need to enable or disable any feature.
Sehwag007