Please let us know how to overclock to 800mhz at 2.1
Sent from my E10i using XDA App
Please tell me how
Sent from my E10i using XDA App
I want to speed quickly fpse game
Sent from my E10i using XDA App
triple post ...
you will fry eggs at 800MHz ...
Go to doixahn thread in X8 section ... here
NEVER try more than 768MHz
710 is better.
Read carefully please
If you break your device after any test (if burn it for example) nobody will help you.
thank you
Sent from my E10i using XDA App
if we _could_ go over 800MHz without deep frying our devices, then every custom rom would have a version with this overclock. i dont think devs are stupid
It can be clocked up to 825 MHz ?
Or have I missed something?
Snusdus said:
It can be clocked up to 825 MHz ?
Or have I missed something?
Click to expand...
Click to collapse
you can virtualy overclock at 825 ... in the best case your phone will reboot
in the worst ... it will burn
our mini is too small and the heat won't go off ^^ it will become hotter and hotter
put it in the fridge and test that
(i won't try though )
You can't, anything higher than 748 will most likely cause the phone to reboot, and that's the best case scenario.
psx4droid requires that you have 600mhz +, I think if you overclock to 650mhz it should work just fine as long as you are not running high end games like driver 2.
It wont burn.. My phone has been 825 for 5 days without getting hotter then before
Sent from my U20i using Tapatalk
Snusdus said:
It wont burn.. My phone has been 825 for 5 days without getting hotter then before
Sent from my U20i using Tapatalk
Click to expand...
Click to collapse
How did you get it to run at 825?
Don't ask. Thats insane.
Snusdus said:
It wont burn.. My phone has been 825 for 5 days without getting hotter then before
Sent from my U20i using Tapatalk
Click to expand...
Click to collapse
you're using a mini PRO the mini (e10i) CAN'T be overclocked so higher
deeplyshocked said:
Please let us know how to overclock to 800mhz at 2.1
Sent from my E10i using XDA App
Click to expand...
Click to collapse
use No-frills CPU control download it from market it works good.
my max overclock is 787 mhz U20i phone its reboot above that
Related
Some ROM's permitted to overclock the Optimus One to 867 MHz,but my one,cant do even 787 MHz,because appear an Kernel panic and they Shutting down,WHY? how to overclock more? and the difference between .32 and .35 kernel?(what are that numbers ?)
787 is stable ..
Overclocking beyond that will reduce the lifetime of the phone and its capacity to withstand overclocking ..787 is quite sufficient ..
from my LG-P500 using xda premium
but mu Optimus the maxium without Kernel panic is 768 MHz,if i put 787 MHz a random time they "kernelPanic" and shutdown uff why? i cant keep it at 787
Might be it has lost its stability ..keep it @600for a few days and try overclocking later..
(806 used to give me kernel panics before but now it doesn't)
Sent from my LG-P500 using xda premium
androidusero1p500 said:
Might be it has lost its stability ..keep it @600for a few days and try overclocking later..
(806 used to give me kernel panics before but now it doesn't)
Click to expand...
Click to collapse
you can use your optimus with 806?????' HOW? *.*
You can't that means you can't. Don't expect miracles, and currently i see no actual need for overclocking as system is smooth enough
androidusero1p500 said:
Might be it has lost its stability ..keep it @600for a few days and try overclocking later..
(806 used to give me kernel panics before but now it doesn't)
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
O sh*t!!!! I can only go upto 727 mhz :X I stretch the slider above 727, and it suddenly crashes............
Sent from my LG Optimus One P500 using XDA App
672.. enough juice... i fear overheat
Wrong thread, nothing such as Opimus One.
HawkeyeWPR said:
but mu Optimus the maxium without Kernel panic is 768 MHz,if i put 787 MHz a random time they "kernelPanic" and shutdown uff why? i cant keep it at 787
Click to expand...
Click to collapse
You're better off sacrificing the ~2% difference for better stability.
Different CPU's have different tolerances.
Why so much God dammit! 729 is like waaaaay more than enough.
Sent from my LG-P500 using xda premium
There is finally a way to overclock this thing with stock rom!! It supports at max 1.3GHz which runs very fast and still manages to have very good battery life(Also requires root permissions)
azoller1 said:
There is finally a way to overclock this thing with stock rom!! It supports at max 1.3GHz which runs very fast and still manages to have very good battery life(Also requires root permissions)
Click to expand...
Click to collapse
I know with the ultimate version you can clock up to 2GHz and adjust voltage... does the "max 1.3GHz" mean this wouldn't actually do anything if clocked to say... 1.5GHz?
ZaIINN said:
I know with the ultimate version you can clock up to 2GHz and adjust voltage... does the "max 1.3GHz" mean this wouldn't actually do anything if clocked to say... 1.5GHz?
Click to expand...
Click to collapse
Well in the free version the Max is 1.3ghz but in the full it would probably work at 1.5ghz or 2.0ghz(that would be super fast) but not sure how safe it would be, it may work good on one device but not on the other, if you have the ultimate version you should try it out and see what works and doesn't(I don't have the full version but now I want it!!!)
Cool
Sent from my R800i using xda premium
Can someone upload the ultimate apk?
Sent from my GT-i9000 using XDA App
Jayydude_SGP said:
Can someone upload the ultimate apk?
Sent from my GT-i9000 using XDA App
Click to expand...
Click to collapse
Even if someone did upload ultimate, it does a license check. Besides, I don't think XDA wants to support illegal downloads.
Can't you just buy it?
Sent from my YP-G70
Oh okay.
Sent from my GT-i9000 using XDA App
very nice, thank you for this post
working great on SGP 5.0
great thank you
Would this work on a Galaxy Wifi S 5.0 running 2.2.2 Froyo?
Looks like there are some questions about Froyo support.
Thanks.
1.6ghz it's the max you can go, I've tested it and it appears stable.
Sent from my YP-G70 using xda premium
Bluemgt06 said:
1.6ghz it's the max you can go, I've tested it and it appears stable.
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
How did you get 1.6 Ghz? When i download tegrak overclock it give me upto 1.3 Ghz.
gskillivenom said:
How did you get 1.6 Ghz? When i download tegrak overclock it give me upto 1.3 Ghz.
Click to expand...
Click to collapse
he is using the premium version which supports up to 2.0GHz
Yes I'm using the premium version. The settings for that is (frequency, core voltage, internal voltage)
1600mhz, 1360mV, 1160mV
1200mhz, 1300mV, 1120mV
800mhz, 1200mV, 1100mV
400mhz, 1050mV, 1100mV
200mhz, 950mV, 1100mV
100mhz, 950mV, 1000mV
(I got these values from another post, can't find it at the moment, use at your own risk) I have attempted to go higher but all I got was about 50mhz more before becoming unstable. The app does let you go to 2 ghz but it doesn't work on the galaxy player, I tried but the screen blurs and the device freezes.
Sent from my YP-G70 using xda premium
it hangs no response..
Sent from my YP-G1 using xda premium
Good evening guys. I started this thread because I'm a bit confused on what is the best OC for our SGA. Can someone help on this?
I´m using No-frills CPU Control. If it is the best, don´t know but it works and it is free
ebmrulez said:
I´m using No-frills CPU Control. If it is the best, don´t know but it works and it is free
Click to expand...
Click to collapse
How high can you go? with respect to the stability.
The overclock capabilities depend on the kernel the app will just help you access the them
Ketuts Blackhawk kernel offers 902MHz overclock
----------------
Sent from my Ace. Galaxy Ace
jumbobombo said:
The overclock capabilities depend on the kernel the app will just help you access the them
Ketuts Blackhawk kernel offers 902MHz overclock
----------------
Sent from my Ace. Galaxy Ace
Click to expand...
Click to collapse
Thanks sir.
pakeronjay said:
How high can you go? with respect to the stability.
Click to expand...
Click to collapse
Some can go higher than others. Mine can reach 940 stable maybe yours can or cannot
Doo:DAce said:
Some can go higher than others. Mine can reach 940 stable maybe yours can or cannot
Click to expand...
Click to collapse
What ROM are you using?
pakeronjay said:
How high can you go? with respect to the stability.
Click to expand...
Click to collapse
I don´t use OC Kernel atm and i never tried out how high my Ace can go.
There are differents in how high u can go, try out at your own Risk
My phone gets into a boot loop if I overclock it to 883MHz, so be careful while overclocking. You might kill your ace
Sent from my GT-S5830 using Tapatalk
I will try to run No-frill CPU Control and post some feedback later or tomorrow. Thanks guys. Suggest different apps, for me to observe what is better for may SGA.
Samsung tests their processors to work stable at 800Mhz only.
Stable OC is a kind of lucky draw.... My Ace is stable max at 921-940Mhz......
Sent from my GT-S5830 using xda premium
pvrx said:
Samsung tests their processors to work stable at 800Mhz only.
Stable OC is a kind of lucky draw.... My Ace is stable max at 921-940Mhz......
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
+1
I use setcpu i dont know if its the best but is enough for me
I feel lucky because i can get 960mhz stable with cm9, almost 1ghz.
But be careful and do it by your own risk as i said i feel "lucky"
Enviado desde mi GT-S5830
Pepper95 said:
+1
I use setcpu i dont know if its the best but is enough for me
I feel lucky because i can get 960mhz stable with cm9, almost 1ghz.
But be careful and do it by your own risk as i said i feel "lucky"
Enviado desde mi GT-S5830
Click to expand...
Click to collapse
I can do 960 but it force restarts when ever it gets hot.. so 940 is stable for me... guess you are lucky after all..
Sent from my GT-S5830 using XDA
you can use setCPU application. You can buy it from market. But I prefer not to OC my phone as its drains battery and harmful too...
I'm using SetCPU (I love it since it allows to create profiles, like charging, screen off, etc...). I'm overclocked to ~860Mhz without any problems.
syed.sayeed96 said:
I can do 960 but it force restarts when ever it gets hot.. so 940 is stable for me... guess you are lucky after all..
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
overclocking is too much desired.... but in a hot condition .... keep ur ace cool at normal MHZ of 800 else u can end up of excessive battery heating ,, retarding battery life...and may be a processor burn ....
ambujpriyadarshi1991 said:
overclocking is too much desired.... but in a hot condition .... keep ur ace cool at normal MHZ of 800 else u can end up of excessive battery heating ,, retarding battery life...and may be a processor burn ....
Click to expand...
Click to collapse
I know.. now I am sticking to 600..
Sent from my GT-S5830 using XDA
Jean1501 said:
I'm using SetCPU (I love it since it allows to create profiles, like charging, screen off, etc...). I'm overclocked to ~860Mhz without any problems.
Click to expand...
Click to collapse
Then what d hell is use of governers........
Sent from my GT-S5830 using xda premium
Mine stable at 940Mhz
Sent from my GT-S5830 using xda premium
Pepper95 said:
+1
I use setcpu i dont know if its the best but is enough for me
I feel lucky because i can get 960mhz stable with cm9, almost 1ghz.
But be careful and do it by your own risk as i said i feel "lucky"
Enviado desde mi GT-S5830
Click to expand...
Click to collapse
wow...my ace kindda weird i thought or the kernel is the fault because when i using cm7 with ketut's kernel i can get 960 but in cm9 can only get 940..
both using set cpu with performance governor..
Hey,
last time I'm seeing users who are able to overclock their phones to 806 MHz, and they were saying it's stable. But some users, like me, can not reache that value. The phone hangs or reboots.
But why?
--------
Answered
Just because we have the same phone model doesn't mean we have exactly the same hardware. Some people just have a processor capable of being stable at that frequency, that's all.
---------------
Sent from my LG-P500 via Derpy Mail
P500 is a 600mhz phone. Please people. Look up the definition of overclock
Sent from my LG-P500 using xda app-developers app
it depends on the kernel as well as on governor......never set performance as governor @ 806 bcoz the phone is always on 806 and gets heated up.....use smartass or conservative......i was able to overclock upto some 832 mhz using franco kernel ....
Sent from my LG-P500 using xda premium
Techgod said:
it depends on the kernel as well as on governor......never set performance as governor @ 806 bcoz the phone is always on 806 and gets heated up.....use smartass or conservative......i was able to overclock upto some 832 mhz using franco kernel ....
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yes, but I've used that kernels, which the users had. But I think pink sheep answered my question
Thread closed as requested by the OP.
YZ.
Anyone know risks of using CPU overclocking
Xperia ray have 1Ghz processor.
I think My kernel sets 800mhz.
Now i changed to 1Ghz using setcpu app.
Any problem?
Frying the cpu itself because of overheating.
riyasopr said:
Anyone know risks of using CPU overclocking
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Higher battery drain
Overheating... Sometimes in extreme scenario can burn your phone...
I
Sent from my ST15i with a wide CRACK running down the screen
In my xperia ray. I use xkernel and miui. In about phone it shows CPU:800MHz. I think ray have 1GHz processor. I installed setcpu. Then I set to 1117 now about phone 1Ghz . Any problem?
Sent from my SK17i using xda premium
It will slowly reduce ur cpu lifespan. Its better to set to default freq for daily use.
Sent from my Nokia 3310 using Tapatalk 2
might cause subtle misbehaviour of applications. If you are out of luck corrupted files or corrupted filesystems.
riyasopr said:
Anyone know risks of using CPU overclocking
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Turns your phone into a heater if you do it right!
Coming from a guy who set his unmodified 1Ghz ST15i to 1.8Ghz and burned his hand with it after a while.
Take care and remember to apply caution where necessary!
Xperia ray have 1Ghz processor.
I think My kernel sets 800mhz.
Now i changed to 1Ghz using setcpu app.
Any problem?
Sent from my SK17i using xda premium
riyasopr said:
Xperia ray have 1Ghz processor.
I think My kernel sets 800mhz.
Now i changed to 1Ghz using setcpu app.
Any problem?
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
I think no problem there.
Sent from my Nokia 3310 using Tapatalk 2
Thanks for reply
To all
Sent from my ST18i using xda app-developers app
is overclocking to 1200 mhz safe or dangerous ?
Sparksys said:
is overclocking to 1200 mhz safe or dangerous ?
Click to expand...
Click to collapse
No harm in overclocking upto 1.4 ghz...
But at 1.6 ghz or above the phone overheats
Sent via Smultron
is it risky to under volt a overclokd device... NY one tried it
suael said:
is it risky to under volt a overclokd device... NY one tried it
Click to expand...
Click to collapse
of course if you don;'t do it properly..
You ll get bootloops for sure
Why do u need undervolting.. Its really useless may be an hour u could extend Thats all....
Stock voltages are best:fingers-crossed:
PREDATOR95 said:
No harm in overclocking upto 1.4 ghz...
But at 1.6 ghz or above the phone overheats
Sent via Smultron
Click to expand...
Click to collapse
Great to know this, I overclocked my xperia mini pro to 1.2ghz and I was wondering if its still safe to overclock to 1.4ghz.
thx for information!
I clocked my phone to 1.5 and it's perfect for everyday use.Now that the cold months come it would be even better, not that I felt more heating though.. I still get a 2-day battery time thanks to the power saving options of the kernel and the rom.
Which is the best method to overclock.
Setcpu app is safe or danger?
I used the ROM Control in the settings menu.
Rom control not available in stock rom
Sent from my ST18i using xda app-developers app