The Flyer magic Pen would work better, for note taking, when using a matt surface. any ideas on a good matt screen protector?
I can confirm the Scribe works better with a Matt screen protector.
http://www.amazon.co.uk/GreatShield...38/ref=sr_1_12?ie=UTF8&qid=1306094114&sr=8-12
Too bad they're not shipping this to Germany. Why on earth are the good things only available in the UK ?
I put a zagg shield on mine and prefer it over the "naked" screen. I like the feel of th zagg when using the Flyer w/wo the pen.
I just ordered the Skinomi Carbon Fiber protector
http://www.skinomi.com/htcflp.html
you can get 25% off with the coupon code "Get25"
$25 total with tax
Froschfinger said:
Too bad they're not shipping this to Germany. Why on earth are the good things only available in the UK ?
Click to expand...
Click to collapse
FoliX-FX-Antireflex-Displayschutzfolie
This might work and it is available on amazon . de
There are also some from the manufacturer "mumbi" - something like that.
Just enter htc flyer in the amazon . de search field and you'll find something for your needs
Himmig said:
FoliX-FX-Antireflex-Displayschutzfolie
This might work and it is available on amazon . de
There are also some from the manufacturer "mumbi" - something like that.
Just enter htc flyer in the amazon . de search field and you'll find something for your needs
Click to expand...
Click to collapse
Thank you so much, I already dug through Amazon.de, but I couldn't find any matte screen protector - is that one a matte one? I am after a matte protection in order to receive more natural writing experience as reported.pe
Edith speaking: this is the only matte one available in good ol' Germany. Thanks for the notice! Finally, the Navitech case is shipping here as well .
Well I'm pretty sure it's matt.
But you can also take the one from mumbi. They are available as "antiflex" and "cristalclear" ones... I bet all of them are pretty much the same so I bet you could go for the one I posted before or you can get the mumbi screen protector which is even cheaper.
Shigster said:
I just ordered the Skinomi Carbon Fiber protector
Click to expand...
Click to collapse
Is the screen protector matte? Looking at the site it looks like it may be glossy...
Himmig said:
Well I'm pretty sure it's matt.
But you can also take the one from mumbi. They are available as "antiflex" and "cristalclear" ones... I bet all of them are pretty much the same so I bet you could go for the one I posted before or you can get the mumbi screen protector which is even cheaper.
Click to expand...
Click to collapse
It is, the description's saying that. I will opt for the FoliX one, cannot wait to get my Flyer some protection .
I have a matte one for my Flyer, I love the anti glare that is the matte screen protector.
I will post up pics soon.
pyro530 said:
I have a matte one for my Flyer, I love the anti glare that is the matte screen protector.
I will post up pics soon.
Click to expand...
Click to collapse
Could you post where you purchased one in the US?
I just took off my matte screen (GreatShield from Amazon US).
I didn't think it helped that much with using the pen and it really dulled my screen. Maybe there is another brand matte screen that doesn't dull the screen as much as the GS shield does?
Additionally... there is no cutout for the front facing camera.
Tried two matt protectors, this one was easy to apply and does not dull the screen too much but enhances note taking: http://www.amazon.co.uk/gp/product/B004S79VE2/ref=oss_product
I think this is Euro product.
I just applied the GrestShield product from Amazon referenced above... Both posts are the same product. I bought mine from and Amazon UK, but was fulfilled from the US.
I prefer the matte / anti-glare because it reduces fingerprints on large touchscreen devices. The screen protector is made of a thicker plastic which builds confidence from a protection perspective. It does reduce the brightness of the device slightly, but I've had my flyer set on the lowest brightness setting for indoor use. Increasing the brightness should help.
I haven't played much with the pen yet, but I see no added affect good or bad. Again its the reassurance of protecting the screen with a metal accessory in such close proximity. Especially if you plan to use the other end of the pen as a capacitive stylus.
Overall very happy with the screen protector so far.
UPDATE: the screen protector makes the front camera unusable, but mine was such a poor quality I had essentially written it off. But I will keep an eye out for one with the camera cut-out.
I found the matt GreatShield was difficult to apply (caught a lot of air bubbles) and dulled the screen too much, but does make it easier to use the stylus for detailed notes.
I got the GreatShield clear screen protector and it works great. I don't even notice it's on and the pen works great. Now I can apply pressure when drawing and not worry about scratching the screen. Not too difficult to put on. It does cover the front camera, but since it's clear, I don't really notice a difference. I got the screen protector from Amazon in the US.
jah said:
Tried two matt protectors, this one was easy to apply and does not dull the screen too much but enhances note taking: http://www.amazon.co.uk/gp/product/B004S79VE2/ref=oss_product
I think this is Euro product.
Click to expand...
Click to collapse
I find it a little strange to look through. My screen really lost on clarity, it is now all like covered with dust, a bit like through snow or something... definitely not the best experience with the FoliX. Maybe I need to get used to it, but I had a better experience (though no anti-glare) with glossy protectors on my smartphones back then.
Froschfinger said:
I find it a little strange to look through. My screen really lost on clarity, it is now all like covered with dust, a bit like through snow or something... definitely not the best experience with the FoliX. Maybe I need to get used to it, but I had a better experience (though no anti-glare) with glossy protectors on my smartphones back then.
Click to expand...
Click to collapse
Yes my one seemed like at first, but I seem not to notice it now. Also the feel when using finger input (swipes etc) is better.
The mate screen protector deteriorates the clarity of the screen slightly... It like a haze. For now, it's worth the sacrifice for protections sake. But self definitely keeping an eye out for more options in the future.
Related
Seeing as I screwed up the one that came with the TP2, can anyone recommend an alternative?
rb14 said:
Seeing as I screwed up the one that came with the TP2, can anyone recommend an alternative?
Click to expand...
Click to collapse
I just ordered an Exim SPUC one from ebay, £6 with free delivery, always had Exim, never had any problems
been using Brando Antiglare (blue packaging) protectors for years. got one on my TP2 as well.
Also been using Brando Antiglare protectors on my HD. It's the best for me...
Can you guys comment on the change to sensitivity of the touch screen?
Does one have to press stronger with the protector installed?
More misses with the protector? Loss of sensitivity?
Seeing it in the sun will be a real plus for me on the TP2...can a few of you tp2 owners comment if it was with or without a screen protector? Which way was best for the screen clarity?
i a cheap set of 2 from ebay and it dousnt look like the maked had even seen the phone before, it even covers the buttons witch arnt flush lol, anyway i complained and he said that a few people had complaind and there manufacturor was going to make new ones so hopefully they get it right this time
Got a brando anti-glare yesterday (had one many years ago on my SE P900) and while it's a good quality protector, I find the matte texture disperses the colour on the screen, making it look "wet".
For an example of how it looks, smear a wet finger across your screen and notice the colour distortion. That's what I get from the brando anti-glare. It also had a slight crease in it out of the packet, meaning that there is a perpetual air bubble underneath the crease that I cannot smooth out.
Better than the stock one for quality, but a couple of niggles.
I have an EXiM SPUC and a brando ultra-clear on order - hope one of these will be better.
dazultra2000 said:
Got a brando anti-glare yesterday (had one many years ago on my SE P900) and while it's a good quality protector, I find the matte texture disperses the colour on the screen, making it look "wet".
For an example of how it looks, smear a wet finger across your screen and notice the colour distortion. That's what I get from the brando anti-glare. It also had a slight crease in it out of the packet, meaning that there is a perpetual air bubble underneath the crease that I cannot smooth out.
Better than the stock one for quality, but a couple of niggles.
I have an EXiM SPUC and a brando ultra-clear on order - hope one of these will be better.
Click to expand...
Click to collapse
I got this as well, went on really easy, much better than the stock one. Quarintus recommended using a credit card to eliminate bubbles ( http://forum.xda-developers.com/showthread.php?t=520946 ). -Is there nothing that Visa and Maestro can't do?
Yeah I know about using a credit card to get rid of bubbles. The problem is in the area of the crease it sits slightly above the surface of the screen, meaning that air gets underneath it. Only way I could get around it is to try and bend the crease out, but I reckon I'd cause more damage that way!
This one is nice.
http://brando.com.hk/mirror-screen-guarder-for-htc-touch-pro-2_p03394c1050d039.html
For the record, I managed to reapply the original protector.
im planning on buying this one.
has the mirror effect whene turned off.
http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=220413290660
daveke0201 said:
im planning on buying this one.
has the mirror effect whene turned off.
http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=220413290660
Click to expand...
Click to collapse
thats the same seller i got my protector from that looked nothing like the phone lol, he said hes getting new ones made though and will have them by this week some time.
Hi, im new to this just ordered my TP2 can any1 comment on how good the screen protector is which is supplied with the phone and if its worth buying a better one??
I found the one in the box to be very flimsy and not resistant to scratches at all.
Sure it protects the screen, but it will look very ugly after a very short amount of time.
dazultra2000 said:
I found the one in the box to be very flimsy and not resistant to scratches at all.
Sure it protects the screen, but it will look very ugly after a very short amount of time.
Click to expand...
Click to collapse
Agreed, well worth changing it when you measure the cost of the protector against the cost of the phone
Does anyone have the same problem with this phone that I had with my Diamonds screen protectors, which was the protector peeling off when I put the phone in my pocket?
I had to cut all of the corners off the protector, and the 3-5mm off the top to stop it happening
its paypall, so you dont have to pay it
can any1 confirm this if its any good, worth buying or not??
http://brando.com.hk/mirror-screen-guarder-for-htc-touch-pro-2_p03394c1050d039.html
if not can somebody recommend a similar 1 please??
Hi all:
Does anyone have any suggestions for good screen protectors for the Tilt2 off of Ebay?
I know there are a number of name brand ones which are good, but I have an Ebay gift certificate, so I'd like to buy from there if possible. I can't seem to find any of the good name brand ones on ebay, so I was hoping someone may have tried one of the ones that are available on there.
Suggestions would really be appreciated.
Thanks!
PS: I am currently using the one that came with the phone, and I was happy with its quality, but it has gotten quite scratched up, quickly, so I need to replace it.
http://cgi.ebay.com/2-PACK-LCD-SCREEN-PROTECTOR-FOR-TMOBILE-HTC-TOUCH-PRO-2_W0QQitemZ280435833291QQcmdZViewItemQQptZPDA_Accessories?hash=item414b4739cb
Extremely easy to apply, barely any bubbles/air pockets to be seen. My screen looks like it doesn't even have one on.
Or you could try this link. I ordered mine, but I didn't received them yet so I don't have pictures to upload, but they look sharp
http://cgi.ebay.com/2-MIRROR-Screen...UK_Mobiles_Accessories_RL?hash=item19b63cfef6
I've always ordered screen protectors from Clarivue. The one I put on my Palm TX 4 years ago is still on it. They're durable.
As to ebay, the seller I've always used for clarivues is JHongs. They currently don't have protectors for the Tilt 2 listed, but the last time I asked them to list one they didn't have up, they happily did so.
Just message them, give them the link to the Tilt 2 clarivue (linked above), tell them you're ready to buy, you heard they would list it for you, and I'll betcha in 48 hrs your new screen protector will be on the way.
I bought ebay item #250541670275. It only cost $2.98, it shipped from California, and I had it within a week. They fit the tilt 2 VERY nicely, and I can't tell there's anything on the screen. Buy it!
Thanks so much to everyone who replied!
I will definitely be ordering one of the ones suggested in this thread.
Thanks again!!
Thanks so much to everyone who replied!
I will definitely be ordering one of the ones suggested in this thread.
Thanks again!!
Is the one that comes with the phone any good?
stab244 said:
Is the one that comes with the phone any good?
Click to expand...
Click to collapse
I wouldn't call it bad, but in terms of durability it's lacking compared to clarivue or boxwave or some other name brands.
im To late
but your best bet would have been zagg. most of those cheap plasic one's only hold up for about 3 month or so. zagg hold up until u decide to take it off.
www.zaggs.com that the main site and there should be some on ebay also. i kno that you have a gift card.
TEE82 said:
http://cgi.ebay.com/2-PACK-LCD-SCREEN-PROTECTOR-FOR-TMOBILE-HTC-TOUCH-PRO-2_W0QQitemZ280435833291QQcmdZViewItemQQptZPDA_Accessories?hash=item414b4739cb
Extremely easy to apply, barely any bubbles/air pockets to be seen. My screen looks like it doesn't even have one on.
Click to expand...
Click to collapse
Don't get this if you have a Tilt2. Just thought i'd give you a heads-up (it'sthe T-Mobile version).
If you still haven't purchased any scrren protector, you must have a look at this, although it's not on ebay it's very cheap and offers full body protection.
http://www.gadgetshieldz.com/att-ti...nvisible-shields-screen-protectors-skins.html
If it's not cheap enough use 20% discount cupone PPCSG20
I have excellent experience ordering from Amazon and HIGHLY recommending this seller - Eforcity. (I've ordered 3 protectors for my CDMA and got 8 in the package - someone was pissed to my bennefit )
Anyone using the anti-glare protector? Does it really reduce fingerprints like they are saying?
http://cgi.ebay.com/Anti-Glare-Scre...wItemQQptZPDA_Accessories?hash=item2a03b0c3b6
jmmmmm said:
Anyone using the anti-glare protector? Does it really reduce fingerprints like they are saying?
http://cgi.ebay.com/Anti-Glare-Scre...wItemQQptZPDA_Accessories?hash=item2a03b0c3b6
Click to expand...
Click to collapse
They say "scratch proof", but 3 of mine scratched.
Also, those "invisible shield" ones leave weird residue that does go away after a while, but it gets annoying.
After trying 3 types of screen protectors, I would HIGHLY suggest the regular scratch proof ones. They really work and the bubbles went away after a night of having it on.
jmmmmm said:
Anyone using the anti-glare protector? Does it really reduce fingerprints like they are saying?
http://cgi.ebay.com/Anti-Glare-Scre...wItemQQptZPDA_Accessories?hash=item2a03b0c3b6
Click to expand...
Click to collapse
Generally an anti-glare protector has a matte finish and generally the crystal clear ones are glossy. That's the distinction that matters in regards to fingerprints -- any glossy surface is going to be print-astic and hold on to finger oils with the jaws of life.
I have a clarivue anti-glare, and it is definitely more resistant to prints than the stock HTC protector was. But it's not magic, or even oleophobic, it's just an ordinary matte surface.
I also recommend a decent brand like boxwave or clarivue above some no-name protector if you want to be sure it's going to be durable. I used the same clarivue for 4 years on my palm TX and it was in a 100x better shape than the stock HTC protector was after a couple of weeks.
Has anyone bought an anti glare protector for the screen? I know there is a screen protector topic but they were more focus on just protecting the screen and not about anti glare.
acuralegendz said NuShield anti glare protector was only ok. I rather not pay 25 dollars for an average product.
I also saw link to Lexerd - Viewsonic G Tablet TrueVue Anti-Glare but I havnt heard any reviews on it yet.
I just ordered it yesterday from Amazon, as soon as it's in I'll be happy to let you know.
andygee said:
I just ordered it yesterday from Amazon, as soon as it's in I'll be happy to let you know.
Click to expand...
Click to collapse
I am going to assume that you are talking about the Lexerd - Viewsonic G Tablet TrueVue Anti-Glare. Can you test it in sunlight and indoor light? Thanks a lot
Yes I am, and yes I will be happy to. I don't think it will be here until the end of the week though so will be a few days.
i just installed this screen protector and I must say that the price is ridiculous for the quality.
It makes the screen quality completely grainy. Maybe I have to let it sit for a few hours.
Nice to the touch, has a mat feel. doesn't seem like it effects the touch sensitivity.
the edges are horrible. I can see it lifted all the way around the entire screen and i have no bubbles or dust around the edges but that will change soon. I just hope that as more dust gets trapped under the lifted edges, it doesn't make it worse over time but we will see.
I'm use to the screen protectors where you apply them on like window tints (Body Guardz brand). Had them on my ZuneHD, Droid1, Doid2. All perfect..Lexerd, not even close.
My opinion is that this screen protector should have been 10 dollars. sucks I got the double pack. sigh.
Adding pictures below
pics attached.
stigmax said:
i just installed this screen protector and I must say that the price is ridiculous for the quality.
It makes the screen quality completely grainy. Maybe I have to let it sit for a few hours.
Nice to the touch, has a mat feel. doesn't seem like it effects the touch sensitivity.
the edges are horrible. I can see it lifted all the way around the entire screen and i have no bubbles or dust around the edges but that will change soon. I just hope that as more dust gets trapped under the lifted edges, it doesn't make it worse over time but we will see.
I'm use to the screen protectors where you apply them on like window tints (Body Guardz brand). Had them on my ZuneHD, Droid1, Doid2. All perfect..Lexerd, not even close.
My opinion is that this screen protector should have been 10 dollars. sucks I got the double pack. sigh.
Adding pictures below
Click to expand...
Click to collapse
Thanks for the review stigmax. That sounds horrible even at 10 dollars. FYI there was a one pack of those protectors but little late to tell you that now.
Yea, I knew about the single pack but thought I could save a few bux with the double. After a few hours of use, my eyes got use to the grainy screen
Temp protector I guess, at least I dont have to worry about scratches: )
What I haven't seen elsewhere is that on the "Thank you for purchasing..." sheet that came with the G Tab, it states: "1. The device may come equipped with two anti glare screen protectors over the screen; which should be removed". Huh? Why two? Why remove them. It doesn't make sense. I assume because there is glare, that mine didn't come with them.
murdockr said:
What I haven't seen elsewhere is that on the "Thank you for purchasing..." sheet that came with the G Tab, it states: "1. The device may come equipped with two anti glare screen protectors over the screen; which should be removed". Huh? Why two? Why remove them. It doesn't make sense. I assume because there is glare, that mine didn't come with them.
Click to expand...
Click to collapse
Because at some point there were so many returns (at sears and staples) because of claims of a defective screen which later turn to be some air bubbles trapped under the second layer of the screen protector
I really like my nushield dayvue anti-glare protector. Puts my gtab on par with my xoom visibility wise.
Sent from my Xoom using Tapatalk
Anti-Glare
So has anyone found any good Anti-Glare that are not $30? just trying to find a good screen protector and case so I can stand it up and watch movies if need be.
Ever try Photodon?
http://www.photodon.com/p/MXH-5250-01.html seems nice based on their description but wondering if anyone ever tried one.
I ordered this set a couple weeks ago. One is clear and one is anti-glare:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290551331136&ssPageName=STRK:MEWNX:IT#ht_570wt_1140
They fit the screen perfectly. A little too perfectly actually. It's somewhat difficult to get the protector perfectly straight so that one side or the other doesn't run into the edge of the screen where the edge slightly goes up. I rendered the clear protector relatively useless after attempting to line it up perfectly several times.
Neither of the screen protectors have cut outs for the camera or the light sensor. It doesn't seem to really affect the light sensor, but the anti-glare protector makes the camera pretty much unusable. The camera is fine with the clear protector on.
The reason it makes it unusable is because of how grainy it makes the screen look, and that grain is also visible through the camera. It makes everything blurry. That said, it does a good job of reducing glare as well as a pretty darn good job of cutting down on visible finger prints. I've found that the graininess isn't extremely intrusive for most things. Maybe I've just gotten used to it.
One of the main reasons for purchasing my gTablet was to use it as an eReader for the hundreds of .pdfs I'm required to go through. This is where the grain really becomes troublesome. If it wasn't for the fact that somehow I managed to get the protector on perfectly straight on the first try, I would have already removed it. I'm thinking about ordering another set, cutting out a hole for the camera, and going with the clear protector. I'll make due with some glare here and there and some fingerprints.
bsweetness said:
I ordered this set a couple weeks ago. One is clear and one is anti-glare:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290551331136&ssPageName=STRK:MEWNX:IT#ht_570wt_1140
They fit the screen perfectly. A little too perfectly actually. It's somewhat difficult to get the protector perfectly straight so that one side or the other doesn't run into the edge of the screen where the edge slightly goes up. I rendered the clear protector relatively useless after attempting to line it up perfectly several times.
Neither of the screen protectors have cut outs for the camera or the light sensor. It doesn't seem to really affect the light sensor, but the anti-glare protector makes the camera pretty much unusable. The camera is fine with the clear protector on.
The reason it makes it unusable is because of how grainy it makes the screen look, and that grain is also visible through the camera. It makes everything blurry. That said, it does a good job of reducing glare as well as a pretty darn good job of cutting down on visible finger prints. I've found that the graininess isn't extremely intrusive for most things. Maybe I've just gotten used to it.
One of the main reasons for purchasing my gTablet was to use it as an eReader for the hundreds of .pdfs I'm required to go through. This is where the grain really becomes troublesome. If it wasn't for the fact that somehow I managed to get the protector on perfectly straight on the first try, I would have already removed it. I'm thinking about ordering another set, cutting out a hole for the camera, and going with the clear protector. I'll make due with some glare here and there and some fingerprints.
Click to expand...
Click to collapse
I'm curious if you could use a hole puncher to make a hole for the camera? I have not seen this product so I have no idea what it is like or how thick it is but seems like it could be modded with a hole punch if you do the measurements precisely. Anyways, just a thought I had while reading. Thanks for the review.
jetguy35 said:
I'm curious if you could use a hole puncher to make a hole for the camera? I have not seen this product so I have no idea what it is like or how thick it is but seems like it could be modded with a hole punch if you do the measurements precisely. Anyways, just a thought I had while reading. Thanks for the review.
Click to expand...
Click to collapse
You know, right before I put mine on, I thought to myself - "Should I run out and get a hole puncher for the camera before I do this? No, it should be fine."
I should have went to get a hole puncher. It would work perfectly.
Happy with my Protector
mernst2 said:
So has anyone found any good Anti-Glare that are not $30? just trying to find a good screen protector and case so I can stand it up and watch movies if need be.
Click to expand...
Click to collapse
I bought a matte one and a clear one from Aurum, but fit really well, I think you get get both for under $20. The matte reduces glare and the clear one does not distort the screen. Overall was very happy with the product. The Lexard one and those other "wet" applications ones are a pain in the ass, they also prevent your finger from gliding smoothly on the after application. I got them at Amazon here is the link http://www.amazon.com/s/ref=nb_sb_s...rum+viewsonic&x=0&y=0&sprefix=aurum+viewsonic
NuShield antiglare sheet or DayVue?
Synman said:
I really like my nushield dayvue anti-glare protector. Puts my gtab on par with my xoom visibility wise.
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
Just called NuShield, as their site does not work well with IE9 when placing orders, and was told they are currently NOT selling an "antiglare" sheet for the gTablet. They only have their "DayVue" product, which does not have anti-glare feature.
However, if you contact them, they very likely would consider making an anti-glare version as they already have a template for the gTablet.
[email protected]
I was just looking at their website and it describes the DayVue as anti-reflective. Straight from the website under Viewsonic GTablet.
NuShield DayVue™ antireflective film is the best choice for displays that are being used outdoors. It has good scratch resistance combined with greatly improved daylight readable optics over our antiglare film.
I don't know if they consider anti-glare and anti-reflective to be different, but it seems like the same to me.
ive got an antiglair, it works well and was only 10$ off amazon but if you like using it for videos it kills them, thinking about removing mine but i have a hard time throwing 10$ away
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Gemni69 said:
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Click to expand...
Click to collapse
How about checking the Skinomi thread in this very first page of this section ?
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Good Screen Protector
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
I have the Skinomi. I'm happy with it, but it does not appear to help with glare or screen angles (though, honestly, I only used it for a few minutes before installing the protector).
dj_justice said:
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Click to expand...
Click to collapse
which ones did you get?
-J
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Anyone have recommendations for screen protectors? Looking for helping with anti glare and no finger prints on it. Any info would be great. Thank for all the feedback so far.
Traderny said:
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
Click to expand...
Click to collapse
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
emersonlp said:
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
Click to expand...
Click to collapse
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
sjmoreno said:
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Click to expand...
Click to collapse
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Aurum Screen Protector
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
just my $0.02, but why not use the one by Zagg....?..
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Traderny said:
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
Click to expand...
Click to collapse
Thanks for the info, Traderny. Would you say that the Aurum screen protector allows for smoother gliding movements than the unprotected GTab screen? I'm hoping to find something that provides a nice swipe feel. Too often my fingers would "stick" to the naked screen or (less so, but still) the Skinomi protector.
My .2 cents
Traderny said:
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Click to expand...
Click to collapse
Wet application screen protectors have been around for a while and it has been shown to not be an issue if you follow the directions on installation. There are thousands of people that have used wet installation screen protectors here in the gTab forums that have reported no residual issues with the gTab during/after application.
Also, you don't spray liquid on the gTab, rather you're supposed to spray the liquid on both sides of the screen protector before application and dab up the excess liquid as you work it to the edges with the provided plastic card.
I've used both PET and this style of screen protectors on devices before and I prefer this over the PET as I have found the PET style protectors to be too shiny for my tastes.
Among the most helpful reviews for the PET protector on Amazon there are these comments:
1.) Good product, but a pain to put on. Just the slightest piece of dust will cause an air bubble.
2.) According to the packaging, this item is "Finger print free" and "Bubble free application". I experienced both. I would NEVER purchase this product again or recommend it.
Just goes to show you that people will find something to complain about no matter what the product is.
Protectors Protect
My experience with screen protectors on cell phones is that they are only good to protect the screen from damage. All of them will show fingerprints, smudges, grease and oil. This is esp. true with a touch screen. it's like wearing glasses you got to clean them alot. So save time money and headache by putting a microfiber cloth in the bag with your Gtab.
I went with the Exim anti-glare screen protectors, but did have to wait for shipping from China. I bought a complete skinomi skin set, and promptly botched the wet application of the screen protector, but since I wanted the anti-glare it just meant a week wait for the Chinese Air Mail which I had already ordered.
Overall I like the Exim, it was easy to install without any bubbles, though you might want to trim the corners a bit as its a very tight fit. I ended up cutting them off after applying it because I had the screen on perfectly without a single dust mote making a raised area. I don't mind a poorly cut corner, but do wish I had just done a quick trimming beforehand as I wasn't perfectly centered.
2 for $12.99... Was worth the wait.
Hey Naieve,
does it really help with the anti glare issue? Also does it have any issues with the touch screen interface? Is the screen protector to thick that it doesnt detect your finger movement on the screen? Any help on the finger print issues haha?
It helps some with the glare, definitely diffuses the light, but it looks more like a compromise in between a clear protector and some of the very heavy anti-glare screen protectors I've seen. I like it because of this actually. As to issues with the touch screen, I spent some time googling before buying, and while I forget where I read it the fact is there is no difference while using this protector. Even a light touch still works just fine. I wonder if that is the reason this AG protector diffuses less light, as I have heard of some AG protectors being too thick and screwing up touch. It does still show fingeprints, but its not that bad and is easy to clean. Definitely less noticeable than just the screen itself.
aasoror said:
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
Click to expand...
Click to collapse
I said I would update once my Aurum arrived. Like others have mentioned, there is no cutout for the camera or sensor - I don't know what effect that has nor do I really care. I never use the camera anyway.
The protector itself fits perfectly on the screen - it is so perfect that I had trouble aligning it properly and i would get halfway done installing it and notice it was running off the side of the screen slightly.
It took a few minutes to install because I did want it to be perfect. Now that it is installed I am really happy with it. My fingers slide better across the screen and there are far less fingerprints. I am happy with my purchase.
anyone? all i can find online is
http://shop.brando.com/brando-works...gt-p6810-galaxy-tab-7-7-_p06815c0018d008.html
Quite a number available on eBay. Not sure if they are any good, as I don't use screen protectors myself.
Plenty. I'm using Momax and I found a light scratch on the screen protector only after a week. Glad that I have the screen protector installed. I think it gives you peace of mind especially when you do not use the folder type jacket that can protect the screen. I dislike the folder type and have only the PVC back jacket protecting the back and side. It's thin and make the device still holdable.
U can get the Skinomi screen protector from Amazon. Very high quality and is a wet aplication. Helps a lot to ensure it gets in position.
maansleroux said:
U can get the Skinomi screen protector from Amazon. Very high quality and is a wet aplication. Helps a lot to ensure it gets in position.
Click to expand...
Click to collapse
I saw that too. Do you recommend it?
It's a whole lot pricier than the Empire on Amazon.
I got the cheap ones off ebay and they are horrible. Couldnt get the bubble out.
I ordered the Brando ones and I am waiting to see how those are.
I ended up ordering the Empire one off Amazon.
http://www.amazon.com/gp/product/B006R6BD6G/ref=oh_o00_s00_i00_details
They'll do for me until a matte one comes along.
estelgrace said:
I saw that too. Do you recommend it?
It's a whole lot pricier than the Empire on Amazon.
Click to expand...
Click to collapse
Ah yes. Def can recommend it. I always struggle to apply screen protectors. Maybe im just clumsy dont know. But I love the ability of the Skinomi to be re positioned once applied. The moisture you see after the application disappears fully after about a day.
I had a Skinomi screen protector on my old Viewsonic g-tab (eww), and it was pretty slick. If you take the time to apply it per their instructions it will be virtually undetectable with no bubbles.
estelgrace said:
I saw that too. Do you recommend it?
It's a whole lot pricier than the Empire on Amazon.
Click to expand...
Click to collapse
I dont use any wet apply screen protectors anymore after i tried them once and screwed my phone up - water got into the phone.
Dry ones: With careful application (there is a good video on youtube) the dry ones go on perfectly. And for the price you pay for them on ebay ie $3 buy a couple and if you screw one up have another go. Its really not that hard.
I got both a low priced matte and glossy screen protector (same OEM make). I don't recommend anyone use a matte SP. It gives a dotted rainbow effect to the screen, making it terrible for viewing the AMOLED+ screen.
The glossy one is OK. I'm competent at applying SP's so didn't have any issues with bubbles/dust. Can't notice the SP is there and viewing angles/brightness doesn't seem to be diminished at all.
Just got the Brando ones today.
They are excellent. Really great quality and super crystal clear. Cant even tell its on. They are a little pricey but well worth it I think.
Shipping from Hong Kong to NY took about 10 days.
http://www.protectionfilms24.com/
I got the ADQC27.....perfect fit, and no rainbow effect.
Glossy....almost feels like the Tab's glass in terms of feel but fingerprint doesn't come off as easy as it is non oleophobic.
They ship REALLY FAST which is a huge plus........
brando not bad on my desire G7
Free screen protector，but to my suprise quality not bad，pics added
the phone already have a film .
http://www.ebay.co.uk/itm/150754858...id=m570.l2736&_nkw=150754858296&_fvi=1&_rdc=1
Im waiting for SGP to start making for the Tab7.7 a screen this size NEEDS a screen protector.
Brando are really good.
I have one on my 7.7 Its crystal clear cant even tell its on. Installation very easy no bubbles at all.
I just got the Skinomi protector from Amazon. I will be putting it on tonight and report back how it looks and feels once it is all set.
i am using the original Samsung matte screenprotector and it looks great. the readability is fantastic in the bright sunlight
palle04 said:
i am using the original Samsung matte screenprotector and it looks great. the readability is fantastic in the bright sunlight
Click to expand...
Click to collapse
May I ask where you got this from? I am trying to locate one but can't seem to find it.
I would need it shipped to Australia.
Thanks for any help
Paul
here's one thats ok.
http://www.expansys.co.nz/info.aspx?i=228093