[Q] Need Help Please! - Fascinate Q&A, Help & Troubleshooting

I was in the middle of flashing the all in one DI01 in odin when it says fail and now my computer will not recognize it! It will go into download mode but odin will not pick it up! I have no idea what to do! Please help!

gsubrandon said:
I was in the middle of flashing the all in one DI01 in odin when it says fail and now my computer will not recognize it! It will go into download mode but odin will not pick it up! I have no idea what to do! Please help!
Click to expand...
Click to collapse
You try rebooting the computer with the phone still in?

Try moving the USB connection to a different port, this will force the PC to redetect it. If that doesn't work, remove the Samsung drivers, reboot, reinstall, then reboot a second time before plugging the phone back in.
Sent from my SCH-I500 using XDA App

Thank you for the advice! I uninstalled the drivers and reinstalled them rebooted and it picked my phone up again! My phone is not a paperweight anymore! Thanks again for the help!

Related

Please help-- soft bricked

Please help- I soft bricked, and have read up on the process to fix, that I need to fix via ODIN. I installed ODIN, Kies, Samsung USB drivers (from an XDA thread link that says they are 'KNOWN' to work), have uninstalled, reinstalled, etc. and the problem I'm having is that my computer will not recognize the phone when it's in download mode no matter what I do.
SO frustrating- any advice?? Much appreciated
Try unplugging the usb and plugging back in
Sent from my vib
What operating system are you running? I had to use an xp system myself, win7 would never recognize my phone in dl mode
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
fit333 said:
Try unplugging the usb and plugging back in
Sent from my vib
Click to expand...
Click to collapse
That worked for me. Along with starting with a fresh boot of ODIN after every flash.

Please help me fix my Vibrant issue!

Ok so I have a very strange issue with my Vibrant. When I try to turn it on the phone hangs at the Vibrant screen. This happened after I attempted to restore factory settings on my phone while using the AOSP ish JK2 ROM. After this happened I found it impossible to get to Recovery Mode or download mode. I figured I ought to buy a jig online. After receiving it the jig successfully got my phone into download mode. I was planning at this point to ODIN back to the stock OS. Unfortunately the phone is not being recognized by either the computer or ODIN. I tried using a different USB and USB ports but it didn't help. I also borrowed my neighbors laptop (using the same two USB cords) but to no avail. Also I am still not able to get into Recovery Mode after using the jig.
I'm using Windows Vista and I tried both the ODIN v1.0 and v1.3
I'm willing to try anything! Thanks in advance for your help!
Sounds like you need to install the drivers first, so that Odin recognizes your phone.
Segnaro said:
Sounds like you need to install the drivers first, so that Odin recognizes your phone.
Click to expand...
Click to collapse
Ok so how do I go about installing the drivers?
zacksawesome06 said:
Ok so how do I go about installing the drivers?
Click to expand...
Click to collapse
You can read here
http://forum.xda-developers.com/showthread.php?t=849028
Or you can use the toolbox
http://forum.xda-developers.com/showthread.php?t=954509

ED04 Problems

I just tried updating to ED04 with OTA and now my fascinate just gets stuck in a restart loop (Samsung Logo Comes up then goes away and comes back up again and dosent move on) I am going to try to odin back to DL09 tonight but any ideas.
Sounds like you might just need to reinstall the ROM.
When I messed up my ED04 update last night I was getting a phone-!-computer image on the screen, not a boot loop.
Were your running a voodoo kernel before? I have messed up a kernel and gotten the boot loop before
Flashed back to dl09 and trying to update to ea28 and the last 5 times it has failed
Hi All. My phone is not showing on my computer now. I did OTA update a couple of hours ago and my phone isn't being recognized. It says that the drivers aren't installed even though they are. Not sure what to do now. I can't even get into ODIN because it won't go into download mode. Thanks to anyone who responds. Oh it's rooted, but bloated.
mstrina81 said:
Hi All. My phone is not showing on my computer now. I did OTA update a couple of hours ago and my phone isn't being recognized. It says that the drivers aren't installed even though they are. Not sure what to do now. I can't even get into ODIN because it won't go into download mode. Thanks to anyone who responds. Oh it's rooted, but bloated.
Click to expand...
Click to collapse
Did you try plugging usb cord into outlet like charging it and then trying to put it in download mode? From what i hear sometimes that is a solution to getting back download mode. There are also download jigs that you can buy on ebay or amazon that can get you into download mode.
pull battery on phone.....plug usb into PC. Open Odin.....then hold down the volume down button and plug in the usb into phone.....continue to hold volume down button until it goes into download mode
Jd and Vinnie,
I havent tried plugging into the wall to attempt download mode. Will this allow the computer to recognize my phone? Ive been reading several different fassys doing this. Ill give it a shot. Each time I plug in comp it says device malfunction not recognized. Thankd for your suggestions
Update. I did the plug in wall and it didnt work..:-(...im stuck. Cant get back to stock because odin ans computer wont recognize my phone.....
Sent from my SCH-I500 using Tapatalk
for some strange reason people have reported that the opposite volume button will work sometimes.. idk why it would switch, but did you try holding volume up and plugging into odin?
tapatalked from my stock VZ Fascinate
Anoninja, ill try anything at this point now.
Sent from my SCH-I500 using Tapatalk
edit- it didn't work.
Just for the hell of it can you plug your phone into another computer to see if your phone shows there. Maybe you have to download the samnsung drivers again.
hey fitti,
i tried that already... :-(
hmm geez what havent you tried. I am lost for thoughts then. have you asked this question in IRC? maybe someone in there has idea
I will ask there i am in the rooms now
When I plug it in. It says "one of the usb devices attatched to this computer has malfunctioned and windows does not recognize it". And I have 3 comps. two laptops and a desktop all the drivers are on there. It seems like my problem came about after I OTA'd to be back on stock and then upgrade to new radio. I'm only instock recovery and I can't get my comps to recognize my phone. I don't know what to do.
yea tell me about it. I'm not too good accessing IRC. With some guidance I'm sure I'll manage. Thanks for checking. I appreciate it.
Landshark says to try this - reboot phone while it is connected and usb debugging is enabled
fitti28 said:
Landshark says to try this - reboot phone while it is connected and usb debugging is enabled
Click to expand...
Click to collapse
Hey it didn't work. a box keeps popping up about the usb device attatched malfunctioned and windows does not recognize it. :-(.
Have you rebooted this machine? have you uninstalled the drivers and reinstall? did you try other usb ports on this machine?
Try uninstalling the drivers and installing these:
http://www.megaupload.com/?d=NZS8BF7E
fitti28 said:
Have you rebooted this machine? have you uninstalled the drivers and reinstall? did you try other usb ports on this machine?
Click to expand...
Click to collapse
Hey fitti,
I just plugged into another port. The comp has been rebooted 3 or 4 times. Let me try the drivers again. I believe I did that already.
landshark68 said:
Try uninstalling the drivers and installing these:
http://www.megaupload.com/?d=NZS8BF7E
Click to expand...
Click to collapse
Thank you so much for walking me through this. I really appreciate it. . I'm downloading drivers now.

help

"firmware update encountered an error please use kies to enter recovery mode "
thats whats coming up on my phone after my pc crashed while i was trying to flash a firmware on odin
now odin doesnt see my phone when i put it in download mode and if i try to enter recovery mode i just get
"firmware update encountered an error please use kies to enter recovery "
i have no problem getting my phone into download mode i just cant get odin to see it to be able to flash a firmware .
any ideas or is there a different program i could use to flash a firmware
Go check this threat out.
http://forum.xda-developers.com/showthread.php?t=1457458
Firstly, no offence but please do not create topics with idiotic titles like "help" which do not describe teh topic in any way other then its a newbie thread.
Second use search before creating topics because its a good chance that the thread already exists or question has already been answered.
TheATHEiST said:
Second use search before creating topics because its a good chance that the thread already exists or question has already been answered.
Click to expand...
Click to collapse
i have searched the forums ,my problem is i cant get odin to see my phone and i have tried . i have taken out kies from my pc and kept the drivers for my phone on the pc . so i am just looking for a solution
You need to keep kies on your pc and then use Odin
Tool-kit said:
Go check this threat out.
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i followed this thread and it said to uninstall kies as it sometimes interferes with odin
odin wasnt seeing my phone when kies was installed and still not seeing it with kies uninstalled either
Yes it interferes with Odin. Just open your task manager and quit all tasks related to kies. Kies doesn't like Odin being able to do all the amazing flashing.
Chris.
Sent from my GT-I9100 using XDA
This should not happen... if it does... I'm guessing it's because... when you use kies, USB debugging should be off. And when you use Odin... you should enable USB debugging.
(This way has NEVER failed me... or anyone else I know. Otherwise something else must be up)
themadba said:
Yes it interferes with Odin. Just open your task manager and quit all tasks related to kies. Kies doesn't like Odin being able to do all the amazing flashing.
Chris.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
chris thanks but i even switched off my pc and and nothing in tassk manager is running related to kies
but thanks anyway
Because when you uninstalled kies, you probably removed the usb drivers you need. Try to re-install it and make sure you phone is in debugging mode after... before using odin.
If you don't want to install the drivers with kies, then you need to download and install the samsung drivers yourself.
cyberboob said:
make sure you phone is in debugging mode after... before using odin.
Click to expand...
Click to collapse
my phone wont boot up so i dont know if debugging mode is on and i have installed the usb drivers to my pc .
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
cyberboob said:
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
Click to expand...
Click to collapse
your not kidding lol
cyberboob said:
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
Click to expand...
Click to collapse
I don't think that's true. To flash via Odin, you just need drivers installed (with Kies installation, or stand-alone driver installation), and the phone needs to be in download mode. If these conditions are met and the phone is connected to the computer via USB, and Odin still doesn't see the phone, you may need to try another computer.
lol. Are you trying this while the phone is plugged in via usb? Try unplugging it first... then go into download mode... then start odin and then plug in your phone.
cyberboob said:
ouch... that is a bit of a problem then. If you can't boot up your system... because debugging mode is needed.
Click to expand...
Click to collapse
i was flashing a firmware and in the middle of it loading onto my phone ,my pc shut down my phone wont boot up . when it starts up it comes up with
two little pc's and it says firmware update encountered an error please use kies to enter recovery
i can get the phone into download mode but kies doesnt see the phone neither does odin .
if i try to enter recovery mode by holding down power ,home and volume up it comes up with the same message about the firmware error .
hope this explains it
ctomgee said:
I don't think that's true. To flash via Odin, you just need drivers installed (with Kies installation, or stand-alone driver installation), and the phone needs to be in download mode.
Click to expand...
Click to collapse
Then you know something I don't, because from all tutorials I've seen and videos... Odin won't see phone unless debugging mode is enabled.
cyberboob said:
lol. Are you trying this while the phone is plugged in via usb? Try unplugging it first... then go into download mode... then start odin and then plug in your phone.
Click to expand...
Click to collapse
oh ive tried that too lol
now downloading the drivers again and going to try and reinstall them
Well I hope it gets sorted, or someone with better knowledge can help you get it recognized by Odin or kies.
Past 5am here and I need sleep. Will check to see how you doing tomorrow. Good luck!
cyberboob said:
Well I hope it gets sorted, or someone with better knowledge can help you get it recognized by Odin or kies.
Past 5am here and I need sleep. Will check to see how you doing tomorrow. Good luck!
Click to expand...
Click to collapse
thanks for all your help , i have a feeling its the usb drivers for some reason
will let you know how i get on
thanks again

help| Odin stuck at setup connection

my odin eas stuck at set up conections and after i tried to chaneg the USB ports the odin dosn't reeding the phone
what can i do?
plese halp me
1. use a spellchecker.
2. reinstall drivers, uninstall Kies, use a different usb port/cable, use a different version of Odin, use a different pc.
Glebun said:
1. use a spellchecker.
2. reinstall drivers, uninstall Kies, use a different usb port/cable, use a different version of Odin, use a different pc.
Click to expand...
Click to collapse
thank you so much it workt!
Rightclick -> Run as administrator fixed this issue for me.
odin stuck
hy i have the same problem. i have reinstalled the drivers, use another odin, but it still wont connect? pls help
Crniy said:
hy i have the same problem. i have reinstalled the drivers, use another odin, but it still wont connect? pls help
Click to expand...
Click to collapse
Apart from changing cable / motherboard port nothing else can be tried .
jje
JJEgan said:
Apart from changing cable / motherboard port nothing else can be tried .
jje
Click to expand...
Click to collapse
Remove the external sd card,put battery back in phone,again in download mod,and try again flashing via odin...worked for me...
JJEgan said:
Apart from changing cable / motherboard port nothing else can be tried .
jje
Click to expand...
Click to collapse
Try it on someone else's computer, I kept running in to issues, and changed the USB port I was using, removed SD card, unplugged USB cable after I got the "PASS!" message in Odin.
Additionally ensure you have the right files
IceCreamBoris said:
my odin eas stuck at set up conections and after i tried to chaneg the USB ports the odin dosn't reeding the phone
what can i do?
plese halp me
Click to expand...
Click to collapse
disconnect internet
Make sure you are in odin mode on the device. I came from HTC One and didn't put my device in Odin mode. Duh.. right? lol.
You can get into Odin mode by doing "adb reboot-bootlaoder"
for the best results:
1.use an official Samsung cable
2. unplug all unneeded usb devices
3.reboot into download mode again
4.connect to a usb 2.0 port on the back of the pc
5.run odin as an admin
if that dose not work, make sure kies is removed, and re-install the Samsung drivers,
reboot pc, and try again.
solved similar problem...
reboot your phone into download mode, but yet not proceed, plug into pc, open odin (as administrator), put the firmware files in their respective places, and finally press vol up to proceed in download mode and press start, it must solve, if all else does not help .. hugs
Hope this helps, if so please press "thanks" ..
sent from my Galaxy Y Duos S6102 ..
About ODIN connection status stucking issue ...(Working solution)
IceCreamBoris said:
my odin eas stuck at set up conections and after i tried to chaneg the USB ports the odin dosn't reeding the phone
what can i do?
plese halp me
Click to expand...
Click to collapse
Do one thing when you are trying to connect in downloading , just make sure kies is not running at background.
Thing is kies blocks that connection which you are trying to make. It worked for me as well. All the best.
hp79 said:
Make sure you are in odin mode on the device. I came from HTC One and didn't put my device in Odin mode. Duh.. right? lol.
You can get into Odin mode by doing "adb reboot-bootlaoder"
Click to expand...
Click to collapse
Crap. Did the same stupid thing...
mikeprachar said:
Crap. Did the same stupid thing...
Click to expand...
Click to collapse
Happened to me too. The inductions I was following did not mention download mode.
Whooooo! It worked!
klijakliki said:
Remove the external sd card,put battery back in phone,again in download mod,and try again flashing via odin...worked for me...
Click to expand...
Click to collapse
This worked for me after having so many problems. Nobody was clear on how to fix it. I had soft bricked my phone. It wouldn't connect to Kies or allow any pit or rom being flashed to it. Everything would fail. I tried doing what you said and it worked. I always got the errors 'No pit partition' etc.
I plugged in the USB without the battery in.
Phone wouldn't switch on into recovery without battery in so I put it back in.
I then took it out and Odin wouldn't connect to it and start the process without the battery in so I put it back in.
I loaded up the pit file and started it! You should have seen my face! haha! It worked!
It booted up! Hooray!
I switched it off and booted it in recovery mode.
Installed new rom (hopefully this won't break)
Thank goodness for that. I feel your pain guys. If you need any help just message me.
amongstgeeks said:
This worked for me after having so many problems. Nobody was clear on how to fix it. I had soft bricked my phone. It wouldn't connect to Kies or allow any pit or rom being flashed to it. Everything would fail. I tried doing what you said and it worked. I always got the errors 'No pit partition' etc.
I plugged in the USB without the battery in.
Phone wouldn't switch on into recovery without battery in so I put it back in.
I then took it out and Odin wouldn't connect to it and start the process without the battery in so I put it back in.
I loaded up the pit file and started it! You should have seen my face! haha! It worked!
It booted up! Hooray!
I switched it off and booted it in recovery mode.
Installed new rom (hopefully this won't break)
Thank goodness for that. I feel your pain guys. If you need any help just message me.
Click to expand...
Click to collapse
Remember. You have to take out the SD card!
M47H!AS said:
reboot your phone into download mode, but yet not proceed, plug into pc, open odin (as administrator), put the firmware files in their respective places, and finally press vol up to proceed in download mode and press start, it must solve, if all else does not help .. hugs
Hope this helps, if so please press "thanks" ..
sent from my Galaxy Y Duos S6102 ..
Click to expand...
Click to collapse
Thank you! Worked perfectly.
Issue Solved = Simple Solution
As stated above:
plug in the USB cable - Then Press Volume "UP"
So friggin simple, why isn't this included in All the Instructions??
Switch off the device.. Boot in download mode and then click on start at odin
immediately start downloading !!
worked for me! !

Categories

Resources