Related
Hi guys,
I'm having an issue with my new touch pro 2 from verizon.
I purchased the act100 TV out cable:
http://store.wmexperts.com/htc-tv-out-cable-act100/11A75A5166A.htm
I plug it in as instrucated, the touch pro 2 asks me what type of signal i want (NTSC/PAL) then brings me to a screen where i can pick Presentations etc.
However the TV displays no images, i get sound but never a picture.
I have tried this on 2 different TV's and tried both NTSC and PAL and all i ever get is a blank screen with audio.
Am i missing something or is the device faulty?
thanks
Raptor
raptor_demon said:
I have tried this on 2 different TV's and tried both NTSC and PAL and all i ever get is a blank screen with audio.
Am i missing something or is the device faulty?
Click to expand...
Click to collapse
Hi Raptor,
I have exactly this problem, and I am quite distressed, because it worked only a few days ago. Did you ever get this issue resolved? I know you listed the same issue on another forum, but I couldn't tell how you did it from the post. How did it work?
Cheers,
Joel
Sad to say i never made this work sorry.
Me too, and google around doesn't help anyway,
If it's has resolved, pls post it in here or pm me.
Thanks
Ok, some year ago i tried to make the sound work through the speakers in my car.
I opened up a soundcable and modifyed it to fool the phone that it was in video out mode.
So here's how the cables should be connected. I can post my pics of how it looks and maby someone's able to figure something out from it
Actually, it would be really easy to fool the phone that it's in Video out mode, just bend the gnd wire to the tv-detector wire, and solder them together (inside the cable that goes into your phone).
The blue and the orange pin needs to be connected to each other inside the cable housing.
Edit: To clear things out this actually works on my phone and whenever i connect the cable it swaps over to video-out mode. No problems at all.
Edit2: Nevermid, after reading through your post i noticed that you've already got the phone thinking it's in video out mode, so that's probably not the problem.
Hi Xda forum, I just bought asus transformer prime. I was able to output Hdmi(Honeycomb) to my plasma tv in the afternoon, however after I've upgraded to ICS, my plasma tv could no longer even detect the hdmi output with my prime tablet. I replaced the cable with a new one and still nothing happens.
If I plug in nothing happens, no reaction from my tv and tablet.Please help.What should I do ?
I'm obligated to ask you to double check the input on your TV.
TF201 | XDA Premium
Yes, I did check the input on my tv. I was able to output my prime onto my tv in the afternoon (still running HC).
My experience was just the opposite. I have a Sony Bravia TV and the hdmi output was only playing through the left channel with Honeycomb, but after ICS it is partially fixed as now it plays stereo. I would like to see it be able to pass thru surround sound too (did you hear that ASUS?)
I had a similar experience except it only involves audio. HDMI out to my tv (then back into the amp) was absolutely fine under HC. Updating to ICS stopped the audio from working, although I can still see video. Not a huge issue for me as I can get audio over the headphone socket, but it is still annoying.
The cable I initially used was bought some time ago, but it works when I connect the Prime to a Sony HMZ. I'm wondering if the audio output format has changed and my tv or amp isn't recognizing it.
Can anyone confirm whether there are HDMI settings that can help myself and the OP. I *DID* see some settings once, but can't seem to find them again.
jimbob1971 said:
I had a similar experience except it only involves audio. HDMI out to my tv (then back into the amp) was absolutely fine under HC. Updating to ICS stopped the audio from working, although I can still see video. Not a huge issue for me as I can get audio over the headphone socket, but it is still annoying.
The cable I initially used was bought some time ago, but it works when I connect the Prime to a Sony HMZ. I'm wondering if the audio output format has changed and my tv or amp isn't recognizing it.
Can anyone confirm whether there are HDMI settings that can help myself and the OP. I *DID* see some settings once, but can't seem to find them again.
Click to expand...
Click to collapse
I have video with no audio as well. Didn't try on HC, only ICS.
Sent from my Galaxy Nexus using Tapatalk
Man, I was kinda looking forward to using this function. For the most part my Prime seems to be flawless. Any recommendations for a decent cable so I can give it a try and report back.
Not sure if you guys noticed but there has been an Asus rep here on our forums trying to help trouble shoot. Gary Key is his user name, maybe he could be made aware of the problem. He seems to have been extremely helpful thus far.
Sent from my Transformer Prime TF201 using Tapatalk
Mcoupe said:
Man, I was kinda looking forward to using this function. For the most part my Prime seems to be flawless. Any recommendations for a decent cable so I can give it a try and report back.
Not sure if you guys noticed but there has been an Asus rep here on our forums trying to help trouble shoot. Gary Key is his user name, maybe he could be made aware of the problem. He seems to have been extremely helpful thus far.
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
Maybe he can... but I don't know how they're going to address the rounded edge issue. That being, the micro HDMI feel very loose plugged in and it seems the physical port degrades also. It means that you can't use the tablet to play Rip Tide or whatever because the cord will fall out or port gets bent. And yes, I have a serial number Mr. Key.
The issue for me right now is the fact that my pioneer plasma pdp 435hdg tv can't detect the hdmi when connected to my prime. I tried it before I updated to ICS and it worked!...Very strange. Tried changing the cable and all no problem whatsoever.
My cable actually fits in very snuggly, not loose or anything.
venkadesh3 said:
The issue for me right now is the fact that my pioneer plasma pdp 435hdg tv can't detect the hdmi when connected to my prime. I tried it before I updated to ICS and it worked!...Very strange. Tried changing the cable and all but still didn't work with ICS.
My cable actually fits in very snuggly, not loose or anything.
Click to expand...
Click to collapse
What can I do ? I've emailed to asus support team but no reply yet.
Problems
HDMI out worked flawlessly for me with HC but after the ICS update my TV also cannot detect input, tried all 3 HDMI ports just comes up with no input.....
Notes: I used one TV under HC and a different one under ICS, could change outcome
ICS also gave me the diagonal flicker, occasional reboot, and sometimes auto-orientation will stop working.
Ahh you're facing the same issue as me. May I know what Brand is your tv,bro?
TVs
The one that worked on honeycomb was a Coby....fairly cheap one
THe other on that I tried to use but failed with ICS was LG
Mine's a Pioneer plasma.It was very shocking for me because it worked an hour ago in HC and after updating to ICS it can't even detect hdmi. Certain that it isn't a HW problem just a SW prob with ICS and certain Tv's. But no answer so far from Asus/ Google worries me.
I'm pretty sure I remember reading in a Mobile tech Review article that the Prime ICS has issues outputing 5.1 audio, and that only certain channels, 2 of 5 speakers and the bass came through. So I'm guessing it's a known issue that Asus needs to fix in an update.
Updates?
Anyone else having problems??? Any information regarding this problem from Asus yet?
going into the notifications and clicking on hdmi notification made it show up on my tv
I got a replacement order on mine, my wifi is sheet, and the HDMI doesn't work. I've tested the wire with 3 TV's(Vizio,Samsung,LG) got nothing. Had my buddy test his prime with the wire and kaboom it worked.
Id get it replaced.
firmware fix
I will test this weekend if it works with the new firmware that was released on the 18th...if anyone else who had problems can test before hand please do so
Tried with the new update but still doesn't show up on my tv.
I had my Samsung TV (connected to network) on, but I had not got around to turning on the cable box yet so it was just a blank screen. I was in the Galley looking through my pictures and I started to watch a video of my son playing with the dog in the yard. While the video was playing I hit the menu button and it gave me a few choices and one was pick player. It gave me the choice to watch it on the Evo 3D or TV 50C550. I picked the TV and then suddenly I was watching my son on the TV and I was able to adjust the volume on the TV with the phones volume key.
I play with this phone everyday and to find another unknown (to me) feature was awesome. I guessing it has to be some type of DLNA protocol going between the phone and the TV. Now, too bad it couldn't give me the choices to pick a player when I'm watching netflix.
This is awesome
Jay
I guessing it has to be some type of DLNA protocol going between the phone and the TV.
Click to expand...
Click to collapse
Absolutely.
Cool feature. I don't use it much though.
I was visiting my mom and she has one of those internet radios (Philips i think) and you can do the same and don't have to approve the playback on the device as long as it is in the same network of course. It just instantly plays whatever the EVO sends out.
Freaked her the f*** out for s***s and giggles when she was sitting next to it reading the newspaper.
*heads off to hell*
jurrasstoil said:
I was visiting my mom and she has one of those internet radios (Philips i think) and you can do the same and don't have to approve the playback on the device as long as it is in the same network of course. It just instantly plays whatever the EVO sends out.
Freaked her the f*** out for s***s and giggles when she was sitting next to it reading the newspaper.
*heads off to hell*
Click to expand...
Click to collapse
Haha, just throw porn up there every now and again.
Reading the newspaper, "Oh what's this? A coupon for ground bee...."
***BOOM! 2 PEOPLE GETTING IT ON***
...mother of god.
I got my mhl addapter but it is not working correctly. I hook the addapter to the hdmi cable then hook the power using the cable and power supply that came with the phone and finally connect to the phone. I do hear a beep and see the phone charging so i know the power connection is good. Most of the time i dont get anything at all in the monitor, sometimes all i get is a flashing of the screen as if a signal is coming and going and in a handful of instances it had work but it would play video very chopy at both the hdtv and the phone screen, like a frame every 3 seconds. I try my larger hdtv and exibit the same behavior execpt that i never got it to work. I realize the addapter migth be defective but in the other hand i might be doing something wrong. The videos i tried both works fine in the phone by itself. One is off youtube and one is a movie saved in the sd card.
Thanks!
Fernandq said:
I got my mhl addapter but it is not working correctly. I hook the addapter to the hdmi cable then hook the power using the cable and power supply that came with the phone and finally connect to the phone. I do hear a beep and see the phone charging so i know the power connection is good. Most of the time i dont get anything at all in the monitor, sometimes all i get is a flashing of the screen as if a signal is coming and going and in a handful of instances it had work but it would play video very chopy at both the hdtv and the phone screen, like a frame every 3 seconds. I try my larger hdtv and exibit the same behavior execpt that i never got it to work. I realize the addapter migth be defective but in the other hand i might be doing something wrong. The videos i tried both works fine in the phone by itself. One is off youtube and one is a movie saved in the sd card.
Thanks!
Click to expand...
Click to collapse
I have trouble getting mine to connect to my monitor. It takes me many tries but when I finally get it to work I don't have choppy video like you are talking about...everything runs smooth.
You have debugging off, correct? Other than that it may be your adapter as mine has yet to give me a problem on any TV
The debugging set to on was causijg the lag in the video. Thanks. After i got that out of the way i played with it more and realized the reason i dont get video has to do with the usb cable. I can play with it and if i put pressure in an upward direction it works. So i know i do have a defective addapter. I will try other usb cables but this is a good working cable and brand new. Another issue worth to mention is how horrible the video quality is. It looks like real redish, no sharp at all. It reminds me the old time when we only had over the air tv signal and you were getting a signal from a distant station. Is this normal? I wasnt expecting 1080 full hd signal but if this is the way it is supposed to work then maybe i dont need this addapter after all. Anyone care to coment on their video quality?
I tried at work on my pc monitor with a hdmi to dvi adapter. I had no problem getting the adapter to work continuously but video got choppy again even without debuging on... I will do some more testing later...
hate to bump this but if anyone using mhl can chime in and let me know how good/bad is their video quality on a 32 inch (or higher) hd tv I will appreciate it much. If what I saw in mine is the way it is supposed to look then I might as well save my money and watch whatever I am watching in the phone itself....
Thanks!
I'm having the same issues, too. Would like to know if anybody knows how to resolve this.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Fernandq said:
hate to bump this but if anyone using mhl can chime in and let me know how good/bad is their video quality on a 32 inch (or higher) hd tv I will appreciate it much. If what I saw in mine is the way it is supposed to look then I might as well save my money and watch whatever I am watching in the phone itself....
Thanks!
Click to expand...
Click to collapse
I hook mine up to my 55in LCD every once in a while and the videos play at almost the exact quality as what's on the note's screen. The only difference I've noticed is the picture on my TV isn't as bright as on the note when playing videos.
Mine is good from time to time on a 42" screen, but the sound cuts out sometimes, and occasionally static goes across the screen.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
So I should see good quality... Tonight I tried my work monitor. I hooked a hdmi to dvi adapter to the monitor, hook the hdmi cable to it, then hook the cable to the mhl adapter, hook the power, then hook to the phone... It worked great, the audio was coming out of the phone which I was expecting to have to bluetooth to my pc to use it for audio as you loose your audio feed when going hdmi to dvi. Videos were looking great, no lag in audio, no skipping or anything. I played youtube videos off dolphin, stock browser and the youtube application with no problem. Played different videos just to make sure it was not the content. Then played some of the movies on my sd card. All great. The only issues I would have is at times I lost all video for several seconds (total back screen) and sometimes when I loose video I would get snow. I rearranged my monitor set up since I use dual monitors at work and wanted to have use the dvi connection on the secondary monitor instead of the first. Then I tried one more time to make sure it was all the same before heading and trying at home... It started failing the same way as at my home. Video will play a frame every 2 or 3 seconds, no audio and sometimes not video at all...
I am going to change this adapter, any of you that is having success care to share who did you bought yours from?
Thanks!
OK, no vodeo for me, checking why not.
Applications, settings, location and security, scrool down to find "Disable USB debugging Mode", make sure it is selected.
Fernandq said:
Applications, settings, location and security, scrool down to find "Disable USB debugging Mode", make sure it is selected.
Click to expand...
Click to collapse
Figured it out prolly while u were typing. LOL
Got video and good sound, works with AnyNET+
Im happy for you. Where did you got yours from? I am expecting anoter adapter tomorrow from a different company and it is also supposed to work with anynet+. The seller that sold me this one just returned my money and told me I did not have to return it so I still have it. Pending if the other adapter does the same or not...
Got the new one today, it does work on both of the hdtvs at home with no problems. Anynet does not seems to work on the 20 some inches tv but It does work for my camcorder. At work it didnt work right until I turn off/on the phone, then it stopped working when I tried again after the phone went idle and I switched the monitor to the pc while I was working a trouble. Now it wont work at work even after a reboot. I get that one frame per every2 seconds problem. I am going from a hdmi cable to a dvi connector but it did worked fine before..
I've seen this question posted elsewhere some years back but there was no satisfactory solution at the time and I have the same issue and wondered if there was something now available.
I'm looking to be able to attach two Android tablets to the back of the car head rests so that my two children can watch films on long journeys.
They both want to be watching the exact same video at the same time, and I want them to be as in sync as possible. The kids will be wearing headphones, the sound won't be coming out of the car's speakers. As we're in a car we also don't have a WiFi network to broadcast over. Pressing play simultaneously on the two devices is also not a viable option.
We have tried a single tablet setup held centrally between the two headrests but as the tablet sits at an angle to either child (about 45 deg) they have to turn their heads to see it and tend to lean forward so they can see it more straight on which means they're not sat in their child seats correctly and often pull their seat-belt off their shoulder without thinking. So from a safety point of view this just doesn't work no matter what we say to the kids. If the tablets were directly in front of them on each headrest this problem goes away hence the need for a two tablet solution.
I was hoping there might be a solution where both tablets have the same video files on them but control data is being sent from one device to another - master/slave style. Or, as we have a spare tablet could that be used as a server and broadcast the video from that to the two slave tablets in the back of the car? This would be the perfect solution as it would be controllable by someone sitting in the front.
Another thought was possibly creating a WiFi hotspot with the server tablet (as it's an LTE tablet) and broadcasting over that but is this wholly dependent on mobile signal and also would it eat into the data allowance?
So my question is are there any apps or other solutions that allow either of these scenarios? I have been looking on and off for months (whenever we're faced with a journey tbh) but just can't find anything that does the job.
Any help much appreciated. :good:
Is there no one who's come across this issue before? I can't be the only who'd like to broadcast a video file to another tablet(s) without there being WiFi available. Would really appreciate any help as I'm stuck on this.
**bump**
What, no one? Surely there must be someone who's come up against this?