I'm trying to achieve a dual boot Windows Phone 7 with Android on my HD2 which I just got today using this video:
http://www.youtube.com/watch?v=JTHRAUHZHlo
I'm confused as to what I'm to do as everything I've downloaded and run has not worked. When I power on and hold vol- I get:
PB81100 HX-BC
SPL-2.08.0000 8G XE
Micro(LED) 0x05
MicroP(TOUCH) 0x30
What do I need to do in simple terms?
You need to install HSPL first.
Check this thread: http://forum.xda-developers.com/showthread.php?t=611433
After installing HSPL, when reboot into Bootloader, this should be displayed:
PB81100 HX-BC
SPL-2.08.HSPL
CoutullaHSPL
After that you will need a compatible radio.
Thanks for your reply.
When I try installing HSPL, I get:
You must have SPL 1.42.0000 installed on device! Please install it first.
Error code: 0x400007
Always reference this code for eventual requests.
~EDIT~
I see, I think it's working now.
Related
i have hd2
info
PB81100 HX-BC
SPL-1.66.0000 XE
Microp(LED) 0x05
microp(TOUCH) 0x40
when i turn on that got white screen,i try run hspl2 but stop on runing page
cannot install hspl2
plz help me
what did you do to your HD2?
have you already flashed a custom-rom before HSPL?
omg.
lxno1007 said:
i have hd2
info
PB81100 HX-BC
SPL-1.66.0000 XE
Microp(LED) 0x05
microp(TOUCH) 0x40
when i turn on that got white screen,i try run hspl2 but stop on runing page
cannot install hspl2
plz help me
Click to expand...
Click to collapse
Have you followed the installation instructions for HSPL2? What error messages do you get? Does USB show up when in bootloader screen, are you running HSPL as Administrator etc etc etc.
Please supply a little more information than this if you want help.
i just playing game ,and receive a call then phone stoping in game picture
i take out bettery , and put it back ,pown on phone ,got white screen
misterious behaviour... have you tried a hard reset? that should help at last.
(hd2 wasn't made for playing games! ^^)
Htc Hd2 phone has no previous image or rom. I have tried the Task29 and once it completes and i reboot the phone, an triangle appears which says software update fail please try again then it continues onto the RGB screen. Screen says SS-B3 after that SPL-2.08.HSPL 8G XE, CotullaHSPL 0x05 and 0x50 all on the red part of the screen. Im going to be using T-mobile, If anyone can help that would be great.
hello i'm in need of dire help! i flashed my htc hd2 with the dexter rom and all was well after that i tried to flash to a clean rom series and it doesnt happen!!! nothing! i can change anything. when i try to change my spl version its the same it says i need to have 1.42.000.i tried downloading it from htc website but after i input my S/N it says that this software was not made for my phone. could someone please help me? this is what my boot loader shows
PB81100 HX-BC
SPL-2.08.000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
you don't have hspl, run hspl3 choose 2.08.hspl then run your rom flash.
hi all, I hard formatted my windows phone 6.5, HTC HD2 and started setup for HSPL3 For HTC Leo. The setup started and failed and i'm stuck with it now. it gives me screen
HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
Micro(TOUCH) 0x40
and when i start phone power+volume down with leoimg.nbh in SD card the screen says
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
Micro(TOUCH) 0x40
Upgrade ROM code error. please try again
Serial.
Please help!!!
Common issue:
You still have standard SPL installed & thus require a ROM that is correct ROM code of original country/operator which the one on your SD card is not hence "Upgrade ROM code error"
Your 2 options are:
1. Use HSPL 3 or 4 to install a HSPL which bypasses CID lock & allows you to flash any ROM but by USB & RUU, if do from SD it overwrites HSPL with SPL everytime
2. Find a compatable CID code ROM & flash it ...
If this is a T-Mobile USA handset make sure to flash a ROM with correct radio or you will have a brick ...
Mister B said:
If this is a T-Mobile USA handset .
Click to expand...
Click to collapse
it cant possibly be a tmous with 1.42.0000 spl.
@OP, you are in the wrong forum, this is for tmo usa model hd2 only. (That's why there's so few recent posts, , , most tmous users are now in the android forums.
With the phone in the stripey screen (bootloader) connect usb, , when 'serial' changes to 'usb' you are ready to try running hspl again. What are you aiming for? if its android, (meaning your target is 2.08.hspl) use HSPL2 instead.
i have HTC HD2(made in china)
when i press power On Button then show( software update failed please try again)
when i turn on it on flashing mode in color (red greeen blue and white) then it shows.
PB81100 SS-BC
SPL-2.08.0000 8g XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
what i have to do now please help.
depends what you want to do. looks to me as if it has been flashed from sd with a tmous stock rom, which has loaded 2.08.0000 which has then said 'this isn't a tmous' and given your error.
lets say you want to move to android
into bootloader
hspl4 --> 2.08.hspl (not 2.08.0000)
bootloader
flash magldr
magldr menu - usb flasher
use nand toolkit to set system partition size
magldr menu - 8 ad recovery
instal zip from sd card - choose zip - point it at whatever android rom you want to instal (zip on your sd card)
done/
also, you posted in the wrong section, prepare to be lambasted.
Please help again
i can change only hspl only as per below.
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
i want window 6.5 only not any thing . please help........
serial # is SH08PNW01126
made in china.
please help....
get any 3.14 winmo 6.5 rom.
put phone in bootloader, connect usb lead.
run hspl4
in the dropdown choose 3.03.hspl
when phone reboots, go again into bootloader
run the 3.14 rom.exe installaler.
done.
please help...
Thanks my dear for help me
but now i am facing a different problem .
my dear i have done it.
run into boot loader
run SPL4 and from filter SPL3.00 HSPL
Restrat
again start into boot loader
RUN ( ROM Upgrade for HTC HD2 (O2 UK 3.14.206.1)
it didn't completed.
got error
now turn off and didn't getting ON.
where is the fault.????????
please help.
At what % did you get error?
Explain how it won't boot, no power? Suck on boot screen? Can you enter Bootloader?
please help
1st when is going on into boot loader then during updating ROM it has stop at 8%.
after it got OFF and still not showing any thing. even i checked battery voltage . voltages are ok but leo not ok...
but from couple of days its not showing charging ' not showing any thing , even its not showing ( software update failed)
not entering in boot loader.
and not showing any thing on original charger.