I was reflashing my Vibrant to stock using Odin3 v1.3. It seemed that everything went fine. When the reinstall completed, and went to boot up, my phone would not turn back on. No download mode, recovery mode, or regular boot mode screens at all. The battery is working and charged and still nothing.
I was given the really good suggestion of upgrading to Odin 1.7 or 1.8. And follow the plug in, hold, battery in instructions for several hours with no results so far.
Any other suggestions?? Any and all are appreciated.
Maybe one of the files you used was corrupted or was for another Galaxy S variant. I can't think of anything else that could've caused your phone to brick like that.
Have you tried getting into download mode using a different computer?
If it works I suggest re-downloading all the files including ODIN from this thread: http://forum.xda-developers.com/showthread.php?t=1047087
Thanks for the response.
After rereading the other suggestion I got, I think I may not have added the PIT file when I reflashed to stock. That's the only thing I can think of. It won't power on or be recognized by any computer. There is no response from it at all.
I'll keep trying.
I have bricked my vibrant many times playing with different roms. I almost had to build the cable jig. I have found without fail though if your phone will not do anything that there is one easy way to get it back into download mode for another attempt.
1)pull the battery from the phone and make sure the device is not connected to a USB.
2)hold both the volume up + volume down buttons in until the loading screen displays at the end of the steps listed.
3)slide the battery back into place in the phone
4)with the USB cable plugged into the computer, attach it to the vibrant.
5)press the power button
this method has worked 100% of the time for me. The only time i had an issue, i had loaded the wrong bootloader onto the phone from the i9000. In that case, search for the button press combo to get into download mode for the intended phone. (im still have a dsylexic phone - it displays i9000, then vibrant )
Hope this helps, i have found the vibrant to be unbrickable (thankfully, because im learning android with this phone)
Do you get anything at all like the spindles when you plug it into a charger or PC?
Also what are the .pit and .tar files you are using in ODIN? link maybe?
- You need to be able to see either the spindles or the batt charge icon to do the button method if not then you will need to go the usb jig route to get into download mode. Good luck!
No, I get no response from my Vibrant. No spindles or battery charging status. A complete brick.
I'm using the proper PIT and TAR files. The problem (I think) was that I didn't load the PIT file when I ran ODIN. Now, I can't get anything. I have all the proper files to do the ODIN flash now. I just can't get a response from the brick.
I have seen the the usb jig method mentioned. It looks like it may be over my head. I have no idea how to use an iron to make those connections. FML>
I just had the same exact problem. I searched google and found a way out. Pull your battery and replace it. Do not connect the phone to pc. Hold the volume up key only and hit the power key. I did this and my phone went into dl mode. I hope this helps!
Unfortunately you are in a hard brick situation. However, I can fix this using JTAG. PM sent...
Once again you learn something new everyday here at XDA with the help of the community I like the sound of this, I assume its alot like the XBOX360 JTAG deal. Heres a link I found:
http://forum.xda-developers.com/showthread.php?t=753946
Crash1014 said:
I just had the same exact problem. I searched google and found a way out. Pull your battery and replace it. Do not connect the phone to pc. Hold the volume up key only and hit the power key. I did this and my phone went into dl mode. I hope this helps!
Click to expand...
Click to collapse
you saved my phone....Thank you!!!
mikka06 said:
you saved my phone....Thank you!!!
Click to expand...
Click to collapse
No problem! I thought my phone was dead too. I've learned a lot from XDA and Google!
Thank you, Thi s Works
Crash1014 said:
I just had the same exact problem. I searched google and found a way out. Pull your battery and replace it. Do not connect the phone to pc. Hold the volume up key only and hit the power key. I did this and my phone went into dl mode. I hope this helps!
Click to expand...
Click to collapse
thanks this worked, i thought iam dead,
thanks a lot
Crash1014 said:
I just had the same exact problem. I searched google and found a way out. Pull your battery and replace it. Do not connect the phone to pc. Hold the volume up key only and hit the power key. I did this and my phone went into dl mode. I hope this helps!
Click to expand...
Click to collapse
thanks.....................
Related
Hi everyone, i need ur help please. I have a t-mobile vibrant (sgh-t959). I tried the CM on it. After installing the su kernel, it bricked. Now it keeps rebooting with the samsung galaxy s gt-I9000 screen (the vibrant screen no longer comes up). I can't even get to download mode by pressing vol up + vol down + pwr buttons. Please help me. I m kinda desperate ...
http://forum.xda-developers.com/showthread.php?t=836815&page=6
Although I didn't have the exact same problem, I had a very similar problem. The above link will give you more details about the problem I was having and how I solved it (thanks to click1's suggestion).
I could not get into download mode no matter what sequence of keys I pressed and my phone hanged on the "samsung vibrant" screen. IF your phone is detected by Odin or the computer when you plug it in (doesn't have to be in download mode and your computer doesn't have to be able to show you the usb drives - just as long as there is a confirmation that a usb was connected is enough), then Android SDK will help you force the phone into download mode.
If this doesn't work, your next bet is to physically make a JIG for it:
forum.xda-developers.com/showthread.php?t=819551
From what I have read, this last one physically forces the phone to go into download mode by using the 5th pin on the MicroUSB key.
I know how you feel - I just got my fixed last night and my problem seemed very unique, I wish I could offer more help but I hope these will work for you.
Thank you very much. It finally came back to life. Feel so much better now!
downnload mode, I hold both volume buttons in and connect the usb and it I get into download mode everytime
rickyx said:
Thank you very much. It finally came back to life. Feel so much better now!
Click to expand...
Click to collapse
No problem, I'm glad that solved your problem. I'll see if I can put this solution on the Noob guide so others can see it easily before they resort to making a JIG.
osugsxr said:
downnload mode, I hold both volume buttons in and connect the usb and it I get into download mode everytime
Click to expand...
Click to collapse
the newer vibrants are hardware locked so you can't get into download mode that way. This is why you have to use the SDK to do it.
FriendlyCanadian said:
No problem, I'm glad that solved your problem. I'll see if I can put this solution on the Noob guide so others can see it easily before they resort to making a JIG.
the newer vibrants are hardware locked so you can't get into download mode that way. This is why you have to use the SDK to do it.
Click to expand...
Click to collapse
Does this mean if the sdk will not recognize that the device is connected then i have to make this JIG Thing? because my phone is stuck at the connect phone to pc screen.
raziel26 said:
Does this mean if the sdk will not recognize that the device is connected then i have to make this JIG Thing? because my phone is stuck at the connect phone to pc screen.
Click to expand...
Click to collapse
Yes, make it or buy one. I know who sells them for a VERY reasonable price. If you're interested Pm me for more info.
okay found a solution for now, my issue was related to ROM manager with the SD card, kept getting wrong MD5 Sum!! Really pissed me off about this since I was running through ODIN correctly,
Solution...
Updated the rom with Eugene froyo!! This brought me out of boot looping and now I have a rom on my phone so I can go back to the basics of flashing I hope, I am going to give it a try to see what happens
raziel26 said:
Does this mean if the sdk will not recognize that the device is connected then i have to make this JIG Thing? because my phone is stuck at the connect phone to pc screen.
Click to expand...
Click to collapse
No...being the noob that I am, I'm constantly finding new ways to brick my phone. So tonight, I bricked it with the phone to PC screen. ADB can't detect it and neither can odin. This is FIXABLE, I tried the method here:
http://forum.xda-developers.com/showthread.php?t=771247
Method 3 worked for me. Even if you have a hardware locked phone, I think there is a method around this which involves taking the battery out and putting it back in but I don't remember where I read this in the forums....I know I did read it though, you have to search to find it. Try these before you resort to making the JIG.
i was doing a odin flash back to T959UVJFD it failed. now it wont turn on. computer dosent find it push the buttens just died
davidtanis said:
i was doing a odin flash back to T959UVJFD it failed. now it wont turn on. computer dosent find it push the buttens just died
Click to expand...
Click to collapse
Pull the sd card, battery and sim card. push the power button a couple times. plug in usb cable. hold volume up+down then put the battery in. that should get you into download mode. you then can restore it with odin
didnt work, still no power, no picture, no vibration
How are you trying to get into download mode?
that happened to me too. i was using odin then the phone shutdown and nver turned back on. u might wanna call tmobile if you have insurance on your phone and tell them to send u a new one.
Sent from Samsung Vibrant w/ Nero v3 + Voodoo
rayvil30 said:
How are you trying to get into download mode?
Click to expand...
Click to collapse
just trying to get it to do something, and i dont have insurance though t-mobile
hern1989 said:
that happened to me too. i was using odin then the phone shutdown and nver turned back on. u might wanna call tmobile if you have insurance on your phone and tell them to send u a new one.
Sent from Samsung Vibrant w/ Nero v3 + Voodoo
Click to expand...
Click to collapse
You can't give up that quick. Come on man. Took me over 30 minutes one time to get in download mode. Tried different techniques. Try restarting your pc or maybe even a different odin version. Make sure odin is on before trying to get in downloade mode. Best way for me to get in d/l mode is to press both vol. up and down at the same time and then plug usb in. Other techniques are out their also.
rayvil30 said:
You can't give up that quick. Come on man. Took me over 30 minutes one time to get in download mode. Tried different techniques. Try restarting your pc or maybe even a different odin version. Make sure odin is on before trying to get in downloade mode. Best way for me to get in d/l mode is to press both vol. up and down at the same time and then plug usb in. Other techniques are out their also.
Click to expand...
Click to collapse
Not giving up, dont have a job so cant replace my phone if i want to. just not having any luck
You need to let us know which technique you are using to get into d/l mode so we can help you. Have you odined before?
xavenged said:
Pull the sd card, battery and sim card. push the power button a couple times. plug in usb cable. hold volume up+down then put the battery in. that should get you into download mode. you then can restore it with odin
Click to expand...
Click to collapse
I got in, restarted my pc and tryed this agian (9th time), thanks
rayvil30 said:
You need to let us know which technique you are using to get into d/l mode so we can help you. Have you odined before?
Click to expand...
Click to collapse
yes i had a behold 2
Thanks everyone for the help, my phone is working again!!!
Definitely the wrong section. Here's a couple tips/ideas though. The easiest way to manually get to Download mode it to:
1. Pop the battery, wait a sec, pop it back it.
2. May be easier to leave the battery cover off, we'll get back to this.
3. Make sure your computer is powered on, and the USB cord is plugged into the computer.
4. Without pressing the power button, hold down, volume up and volume down at the same time (this may be easier without the battery cover. This takes a firm grip sometimes, if this fails that's what you did wrong.
5. Still without pressing the power button, plug the other end of your USB cord into the phone. It should boot up into Download mode in a matter of seconds. If not, try again, you probably weren't holding the volume buttons properly.
Also, possible reason it stopped, did you put the .tar into PHONE instead of PDA? That will cause it to error midway like what you described. Otherwise I would definitely re-download/install your USB drivers with the one from this site, I find they work better. Also re-download the .tar .pit and even Odin for good measure. Check out the Vibrant Bible, that thread is your friend. Good luck, hope that helps!
EDIT: Guess I was too slow haha. Gratz man.
Best way is to use usb jig.
Sent from my CM NexSense using XDA App
davidtanis said:
I got in, restarted my pc and tryed this agian (9th time), thanks
Click to expand...
Click to collapse
no problem. i had the same exact thing happen to me a couple days ago. glad you're up and running again
Its not broken,research how to ODIN look for Eugene no brick files.
Nero v3 ///Mpower
Thread movement should commence soon I hope you get your phone working again if anyone can help it's the people here for sure
davidtanis said:
yes i had a behold 2
Click to expand...
Click to collapse
Ouch, Surprised you went Samsung again after getting screwed on that one.
Also, there's a Debricking thread stickied in the Vibrant General section you can try referring to next time!
davidtanis said:
just trying to get it to do something, and i dont have insurance though t-mobile
Click to expand...
Click to collapse
not sure if this is true but i read somewhere on xda that samsung will replace your phone up to three times if you really do brick your phone it will not turn on or load download mode or recovery.
In my experience..Vibrant is very close to unbrickable unless you smash hit...
I odined back to jfd even after flashing a captivate rom...
Sent from my SGH-T959 using XDA App
I tryed flashing a rom without disabling voodoo and know my phone wont even turn on. Any help please!!!!
ireiricky said:
I tryed flashing a rom without disabling voodoo and know my phone wont even turn on. Any help please!!!!
Click to expand...
Click to collapse
If you look couple threads down, you'll see my thread, and I am having the same problem. Slightly different cause, but of the same nature, and the exact same problem. I have not had any real help yet, but I have been scouring the forums here. And I think the only option, if none of the button combinations work, as they don't seem to for me, and you're getting a complete brick, is perhaps the usb jig resistor method... but even that I don't think is 100% because some of the people who created the guides on how to make the jig resistor said it only worked for softbrick, not total brick like our cases. Unless someone can verify otherwise...
Thanks for the reply man i don't know what to do man i spent $400 0n this phone there must be a way but no luck on google either
ireiricky said:
I tryed flashing a rom without disabling voodoo and know my phone wont even turn on. Any help please!!!!
Click to expand...
Click to collapse
Try this. Take your sim card, microsd and battery out. Leave battery out for a few minutes.
Open odin and load with the 512 pit and Jfd tar.
Plug one end of usb cable into computer only
take your vibrant with everything still out of it
hold down both vol buttons (vol up and down) and never let go
do not touch power
while holding down both volume buttons plug in your usb cable into the phone with the other end previously in the computer...do all this while holding down volume buttons and dont let go
now grab your battery with your free hand and while still holding down the vol buttons now plug in your battery
if all goes well your.phone should go into download mode at which pt you can let go of volume buttons.
If this doesnt work you can maybe try the jig if your bootloader is intact
also since you were messing with voodoo you might need to first flash eugenes froyo tbat doesnt brick...im not too sure on this so ask around and look it up.
You need this first of all (Froyo that does not brick)
http://eb-productions.proboards.com/index.cgi?board=samsungsgs&action=display&thread=8
jordanjf86 said:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Click to expand...
Click to collapse
Don't forget to thank :]
iv'e tryied that i read somewhere that it's a hard brick
Then try accessing download mode by first, removing the sd card, sim, and battery, second, plugging in the usb cable, third, holding down the two buttons on the side of the phone, and finally, while holding down those two buttons, inserting the battery.
I havee tried that mothod many times no luck just a blank screen
Then commit a fraud and send it back to T-Mobile saying it suddenly stopped working.
Or if you prefer a wild card you can use a JIG
http://forum.xda-developers.com/showthread.php?t=819551
Edit: Never mind it will not work for you. Sorry :/
Edit 2: The phone does not even turn the buttons on??
no nothing turns on at all no power but when i put it to charge it heats up but no battery screen
Yea, take it to T-Mobile and get it replaced. I got mine switched at T-Mobile once, and it would only boot to the custom Nexus animation....the lady still swapped it out. It all depends on the rep, if they won't switch it, go to a different location. Eventually you'll find someone.
i don't think thats possible seeing as im in Canada bought it off ebay
take it to a phone expert. he will flash a bootloader to your phone.
Sent from my SGH-T959 using XDA App
Hi, I am having a serious problem
My vibrant was working and i was flashing the firmware T959UVKA7 using odin 1.3
once the update was done and it odin said passed
the phone is not turning on at all, act like there is no battery
tried to plug it to wall charger not even responding, its like dead, no power at all
i even tried to remove the battery for 5 min, add it again and plugged the jig
nothing is happenning, tried every combination of keys, even connect it to computer usb with no battery then plugged the battery, nothing, the phone is completely dead
Please let me know if there is any way i can make it to work again? or i totally bricked it?
Sami
Did you try and get into download mode? Connect usb to computer. Hold both up down buttons then plug in usb
Sent from my SGH-T959 using XDA App
jrod33084 said:
Did you try and get into download mode? Connect usb to computer. Hold both up down buttons then plug in usb
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Thanks for the reply, well i tried all.. the problem is my phone isnt even turn on... its acts like there is no battery, even if i plug it to the wall charger it doesnt turn on or give me the battery status icon that is charging
its completely black screen, even the button light dont turn on, nothing turns on and the battery is fully charged
any idea? anyone know how i can fix it?? does that means i ruined my phone forever or is it fixable???
http://forum.xda-developers.com/showthread.php?t=848737 this will make it more clear
bartek25 said:
http://forum.xda-developers.com/showthread.php?t=848737 this will make it more clear
Click to expand...
Click to collapse
Yes read that
Sent from my SGH-T959 using XDA App
samiriad said:
Hi, I am having a serious problem
My vibrant was working and i was flashing the firmware T959UVKA7 using odin 1.3
once the update was done and it odin said passed
the phone is not turning on at all, act like there is no battery
tried to plug it to wall charger not even responding, its like dead, no power at all
i even tried to remove the battery for 5 min, add it again and plugged the jig
nothing is happenning, tried every combination of keys, even connect it to computer usb with no battery then plugged the battery, nothing, the phone is completely dead
Please let me know if there is any way i can make it to work again? or i totally bricked it?
Sami
Click to expand...
Click to collapse
Which firmware (kernel only or complete)? Link?
Which OS were you from before odin up the KA7?
I ran into similar problem. I was from Stock Froyo Kies, then odin over the supercurio stock+kernel KA7. It got black screen ...for a good 5-10 min. I was going to pull out battery but I heard some mumble jumble in the background telling me that it's converting (voodoo ext4) so I left it alone. If you pulled out too early during the conversion before it finish doing voodoo...I'm not sure what happened to that unless your odin KA7 does not have odin. Do you see any light, sound, or splash screen at all?
When you flash, did you have "repartition" checked or not?
Anyway, have you try the 2 button download mode? Mine was silent dead black screen too at one point from last few days with few variation difference caused by different tinkering mistakes. I just took off battery, sim, sd and kill odin. Reput them all back and fire up odin. Hold down both the + and - with 2 fingers, then hook in USB from pc to phone. It should put it to download mode and you can reodin whatever...depends what it can do.
same situation here.
i came from T959UVJFD then i flashed T959UVKA7 (.tar.md5 file from samfirmware.com) using odin3 v1.70
odin says it was finished. but it doesnt turn on anymore. i cannot even go to download mode.
PLEASE HELP!
any kind of button combo doest work
try downloading odin3v 1.85 and using this method to put in to download mode
1. pull the battery,
2. put it back in;
3. then, with the phone still off, plug your usb into the computer,
4. turn on odin3,
5. hold the center of the volume buttons,
6. plug the usb to the phone while holding the volume botton
orginally found in this my posting
http://forum.xda-developers.com/showthread.php?t=1471231
I know I'm posting this on multiple threads, but Im desperate! I'm having the exact issue as OP, am hoping a suggestion from someone helps. Right now my hope is hanging on the comments from people here claiming "it is REALLY difficult to brick this phone".
I was "downgrading" from ICS Passion with GB bootloader, down to stock. The "downgrade" to 2.1 worked fine. Then I used Kies to upgrade to Froyo, and after the install it shutdown, and now the phone doesn't respond to any key. Tried a different battery as well, to eliminate a probably battery issue. No good.
Tried different combos to get to recover/download modes: Vol UP + Power, Vol Down + Power, Vol Up+Vol Down+Power, and Insert Cable+ Vol UP+Vol Down - nothing yet. Used ODIN 1.85 with suggestion from canyon789, and that didn't work either.
Any ideas? Please help.
meascom said:
I know I'm posting this on multiple threads, but Im desperate! I'm having the exact issue as OP, am hoping a suggestion from someone helps. Right now my hope is hanging on the comments from people here claiming "it is REALLY difficult to brick this phone".
I was "downgrading" from ICS Passion with GB bootloader, down to stock. The "downgrade" to 2.1 worked fine. Then I used Kies to upgrade to Froyo, and after the install it shutdown, and now the phone doesn't respond to any key. Tried a different battery as well, to eliminate a probably battery issue. No good.
Tried different combos to get to recover/download modes: Vol UP + Power, Vol Down + Power, Vol Up+Vol Down+Power, and Insert Cable+ Vol UP+Vol Down - nothing yet. Used ODIN 1.85 with suggestion from canyon789, and that didn't work either.
Any ideas? Please help.
Click to expand...
Click to collapse
If your willing to wait the approx. week, call up Samsung tell them that you were updating through Kies and then your phone would no longer turn on, you've tried different batteries and tried different cables and still nothing, she/he will try to help you get into recovery mode, just go along with it, she will then help you get everything you need to send it to Samsung's nearest repair center. Sent mine in last thursday, they replaced the PBA (logic board) and are sending it now. Should be here in 2 days :]
meascom said:
I know I'm posting this on multiple threads, but Im desperate! I'm having the exact issue as OP, am hoping a suggestion from someone helps. Right now my hope is hanging on the comments from people here claiming "it is REALLY difficult to brick this phone".
I was "downgrading" from ICS Passion with GB bootloader, down to stock. The "downgrade" to 2.1 worked fine. Then I used Kies to upgrade to Froyo, and after the install it shutdown, and now the phone doesn't respond to any key. Tried a different battery as well, to eliminate a probably battery issue. No good.
Tried different combos to get to recover/download modes: Vol UP + Power, Vol Down + Power, Vol Up+Vol Down+Power, and Insert Cable+ Vol UP+Vol Down - nothing yet. Used ODIN 1.85 with suggestion from canyon789, and that didn't work either.
Any ideas? Please help.
Click to expand...
Click to collapse
Did you try the exact no-boot steps from the Guide linked to above?
I tried everything else, only the exact sequence worked.
Battery out, phone plugged in, Odin running: press center of volume keys,
insert battery.
cashmundy said:
Did you try the exact no-boot steps from the Guide linked to above?
I tried everything else, only the exact sequence worked.
Battery out, phone plugged in, Odin running: press center of volume keys,
insert battery.
Click to expand...
Click to collapse
Yes tried the exact same steps, no luck. Ordered a jig finally and hoping that will get me out of this mess
I hope the jig works for you. So much for "unbrickable". I will be sure never to Odin anything but the JFD file. Good luck.
work perfect for me thanks
meascom said:
Yes tried the exact same steps, no luck. Ordered a jig finally and hoping that will get me out of this mess
Click to expand...
Click to collapse
his is not going to help at all, you damage the bootloader you as happened to me, but in my case it did ODIN, Mini Kies did.
The only thing you can try and see if you have some success is to do two things:
* Easy way: pay for you to get a JTAG on the phone and reinstall the bootloader. (Actually that's what you Damage to flash it)
* Terse: Vibrant Unbrickable do MOD
(but must be done by someone who is skilled in welding and electronics, as this takes a lot of risk, as is jumping two pins that control the processor of the phone)
note that the device is already damaged, you try to repair it, if you do not succeed, At Vibrant Ebay sell broken, win one for 53.66 at auction. and attempting to repair Give you a MOD.
I hope you will help.
If Mini Kies damaged your phone, call Samsung, tell them that you upgraded with Mini Kies and now it won't turn on and they replace it for free.
xXcybersniperXx said:
If Mini Kies damaged your phone, call Samsung, tell them that you upgraded with Mini Kies and now it won't turn on and they replace it for free.
Click to expand...
Click to collapse
This can be another solution, if you carry LUCK and Warranty!!!!!
Hello, i was trying to odin back to stock with my phone as i had done before many times. I think some how i checked re partition by mistake. Any way it didn't write. So then i unchecked but still didn't write stock rom. I disconnected the phone and then it was all bad from there. I got the phone and computer sign. So i tried a method of getting it recovery that had worked for me before witch was to remove battery plug phone into usb and hold up and down volume keys and put battery in. Please someone help!!!!!! With all the great developers onthis site i know someone can help or deliver the bad news that it's nothing i can do. Thanks in advance.....
edshawn911 said:
Hello, i was trying to odin back to stock with my phone as i had done before many times. I think some how i checked re partition by mistake. Any way it didn't write. So then i unchecked but still didn't write stock rom. I disconnected the phone and then it was all bad from there. I got the phone and computer sign. So i tried a method of getting it recovery that had worked for me before witch was to remove battery plug phone into usb and hold up and down volume keys and put battery in. Please someone help!!!!!! With all the great developers onthis site i know someone can help or deliver the bad news that it's nothing i can do. Thanks in advance.....
Click to expand...
Click to collapse
you're only soft bricked, when i've used odin i've had repartion checked everytime and its worked fine (apart from a few freezes but its worked after)
try it by holding the vol buttoms with battery in and plugging usb in
if it doesnt work at first keep unplugging and replugging in and try different usb ports, it once took me 2 hours of doing that before it connected
and it can connect to odin from the phone ! pc screen so keep an eye on odin for it connecting
kyle51 said:
and it can connect to odin from the phone ! pc screen so keep an eye on odin for it connecting
Click to expand...
Click to collapse
This is true - more than once I've had different crap interupt the process while ODINing, and ended up with that screen - but ODIN was able to see my phone, so I went through the process as if I had the regular download mode screen, and it worked fine.
thank you!!!!! you are the man. i opened odin up and kept battery in and held buttons and put in usb cable and it worked. no one ever mentioned that odin could see the phone without being in download mode before. i would kiss you if it wasn't for the you being a guy thing. lol
edshawn911 said:
thank you!!!!! you are the man. i opened odin up and kept battery in and held buttons and put in usb cable and it worked. no one ever mentioned that odin could see the phone without being in download mode before. i would kiss you if it wasn't for the you being a guy thing. lol
Click to expand...
Click to collapse
no prob, glad to help
just putting the usb in like that with the battery in only works for me, the other way of pushing the battery in doesnt
so try both ways if there's a next time, it might get moody and not want to work the way you normally do it
the phone ! pc screen's pretty much another version of download mode i think