Hello I'm in a very bad situation. I would try out a ROM for the first time. The ROM is MiniCM6-1.0.1. I booted into xRecovery and installed the .zip file. I pressed "reboot". It started up and the write SE logo apeared. The boot animation began and suddenly it froze. I don't know what I can do? I can't pull the battery out(Because its a X10 Mini). Nothing happends when i push at the screen or the buttons? Please help me!
plz plz plz
From http://forum.xda-developers.com/showpost.php?p=6985725&postcount=11
pulpoff said:
You can hard-reset the E10i (mini) by pressing power button while holding the "home" button (middle one)
So thats not a problem.
Click to expand...
Click to collapse
Don't know if that will help because I have an X10MP.
JacoboDK said:
Hello I'm in a very bad situation. I would try out a ROM for the first time. The ROM is MiniCM6-1.0.1. I booted into xRecovery and installed the .zip file. I pressed "reboot". It started up and the write SE logo apeared. The boot animation began and suddenly it froze. I don't know what I can do? I can't pull the battery out(Because its a X10 Mini). Nothing happends when i push at the screen or the buttons? Please help me!
plz plz plz
Click to expand...
Click to collapse
you forgot to do a full swipe after installing. try to enter xrecovery again and re install custom rom then do a full swipe before rebooting.
if you cant get into xrecovery then you have to roll back to 2.1 using SEUS
First, press power + home button. It will reboot your phone.
Then, go back to recovery and do a factory reset.
If it does not help, you can restore your backup.
If you didn't do a backup ,you need to re-flash it using SEUS.
Sent from my Xperia x10 mini using XDA Premium App
Thanks everybody Its working now;D
uhh...same problem with me here..I've got xrecovery installed, but at restart I can't get it to run...SEUS wont detect my phone either..please help somebody ...will it help if I get the battery removed and reinserted before plugging into SEUS (mine is just mini, so removing the batt is gonna be a bit problematic)..
uhh...same problem with me here..I've got xrecovery installed, but at restart I can't get it to run...SEUS wont detect my phone either..please help somebody ...will it help if I get the battery removed and reinserted before plugging into SEUS (mine is just mini, so removing the batt is gonna be a bit problematic)..
somebody please respond
Related
Don't boot... I was doing some changes with Generic 2.0.2.A.0.24 firmware [rooted + xrecovery preinstalled], and then... poof!
Now i can't repair with seus update, the phone don't boot!
Do you have any suggestion?
Thank You...
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
have u tried pressing home and back and on/off button together?
or taking out the battery cable and putting it back in?
I bricked mine earlier, just used Binary's flash tool to reflash 2.1
Skeldave said:
I bricked mine earlier, just used Binary's flash tool to reflash 2.1
Click to expand...
Click to collapse
My phone can't boot, and so i can't start adb or similar...
world2010 said:
or taking out the battery cable and putting it back in?
Click to expand...
Click to collapse
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
world2010 said:
have u tried pressing home and back and on/off button together?
Click to expand...
Click to collapse
Yes, but nothing...
Thank you,
dettofatto
tried updating with seus?? and if u didnt succeed use binary flash tool non gui version and download any 2.1 firmware
shivenjuneja said:
tried updating with seus?? and if u didnt succeed use binary flash tool non gui version and download any 2.1 firmware
Click to expand...
Click to collapse
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
dettofatto said:
My phone can't boot, and so i can't start adb or similar...
Click to expand...
Click to collapse
For future reference: You dont need to have your phone "on" to use the flash tool, it just has to be in the update mode. (Hold back button while plugging into the usb). This is for if you ever brick it again
Skeldave said:
For future reference: You dont need to have your phone "on" to use the flash tool, it just has to be in the update mode. (Hold back button while plugging into the usb). This is for if you ever brick it again
Click to expand...
Click to collapse
my phone didn't go in the update mode...
Where is the battery cable?
Sent from my E10i
dettofatto said:
Don't boot... I was doing some changes with Generic 2.0.2.A.0.24 firmware [rooted + xrecovery preinstalled], and then... poof!
Now i can't repair with seus update, the phone don't boot!
Do you have any suggestion?
Thank You...
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
Click to expand...
Click to collapse
sound like you may have cause the hardware some physical damage, i recomend taking it to se so the can have a look see... also have you tried update mode with battry out (as in hold back button, pc cable plugged in and battery out of phone)? also try out another battery..
Karadenizli said:
Where is the battery cable?
Sent from my E10i
Click to expand...
Click to collapse
http://www.ifixit.com/Teardown/Sony-Ericsson-Xperia-X10-Mini-E10i-Teardown/3124/1
Had the same problem
I had the same problem I took phone apart very carefully unplugged the battery cable and left it for +- 10 minutes plugged battery cable back in assembled the phone I used bin4ry console flash tool I just held down only the back button plugged usb cable in flashtool found x10i mini started flash, Don't turn on phone or anything else after re-connecting the battery just the back button and usb, green led should lite up.I don't know if this help's you must have patience after the flash it takes a while leave the phone for +- 5 minutes after flash run adb shell in console if phone seems not to respond try few times once you get shell your phone should be back to normal just be patient it all takes a while.
stuck in boot loop
Gothic-4-Schiffer said:
sound like you may have cause the hardware some physical damage, i recomend taking it to se so the can have a look see... also have you tried update mode with battry out (as in hold back button, pc cable plugged in and battery out of phone)? also try out another battery..
Click to expand...
Click to collapse
Hi,
would it be possible to cause the phone some physical damage while flashing that would've caused the phone to be stuck in the boot loop? because I'm in the asme predicament on my mini pro. thanks
please help me..i'm stuck w/ the white sony ericsson boot logo just after i restored w/ xrecovery..im using a x10 mini pro although i can still access xrecovery..thanks in advance..
take out your sdcard use an external sd card reader and copy a new image like CM6 3.4 on it. now boot into xrecovery.
factory reset
full wipe
clear dalvik cache
install cm6 3.4
reboot
thank you so much slade87..you have saved my fone and my life for w/ your grate help..thank you very much! ^__________^
No prblem i am glad it worked :-D
Sent from my X10minipro using XDA Premium App
i'm stuck w/ the white sony ericsson boot logo just after i try for ugrade to miniCM w/ xrecovery..im using a x10 mini pro although i can't still access xrecovery...
i try for flash.. but still stuck w/ sony ericsson logo.
try for press "menu button and power button it nothing happen...
what can i do for get back my x10 mini pro normal again..
sorry if my english is bad...
ableh.X10black said:
i'm stuck w/ the white sony ericsson boot logo just after i try for ugrade to miniCM w/ xrecovery..im using a x10 mini pro although i can't still access xrecovery...
i try for flash.. but still stuck w/ sony ericsson logo.
try for press "menu button and power button it nothing happen...
what can i do for get back my x10 mini pro normal again..
sorry if my english is bad...
Click to expand...
Click to collapse
Download SE PC companion and install it:
http://www.sonyericsson.com/cws/supp...10?cc=gb&lc=en
Open Sony Ericsson PC Companion when it´s installed:
Choose Support Zone(Start/Begin)->updating the phone software: it will pop up a message phone not found. Search for blue marked: Repair phone. Click on it and follow instructions on how to do.
If you still dont get it, check:
http://www.youtube.com/watch?v=i6CMm...eature=related
After upgrade to "2.1.1.A.0.6" about 1 months, my X10 mini restart automatically frequently without any reason. I really don't know why. Also i formatted Memory card. It doesnt have any default folders after insert into my phone too. Pls help me on this.
reflash it using SEUS do a total reset flash(the one that wipes every data)
same prob here but with ginger dx v17 bootloader unlocked so can't access seus or pc companion... really worried about my phone's prob..
reset it with CWM....factory reset...
wankel29 said:
reset it with CWM....factory reset...
Click to expand...
Click to collapse
can't boot to cwm i have xrecovery installed.
Although holding the power button gives me an option to reboot to cwm but can't it does only simple reboot........
XGr7078 said:
can't boot to cwm i have xrecovery installed.
Although holding the power button gives me an option to reboot to cwm but can't it does only simple reboot........
Click to expand...
Click to collapse
hit the back button when the SE logo appears to boot into recovery
demoniacs said:
hit the back button when the SE logo appears to boot into recovery
Click to expand...
Click to collapse
I did and booted into xrecovery and did full wipe and restarted the phone but it got stuck on gingerdx logo not se logo.
try using flashtool with ftf firmware files....and next time use CWMrecovery which does not show such problem
Hello,
i have a problem with my Sony Ericsson Xperia X10 mini, I flash the rom like a stupid with FreeX10 Froyo and I got no error but after I did reboot I see the SE image and is remain like this for 30sec and after this the phone is rebooting again and take over again and again and again.
can someone help me please!!!
http://www.youtube.com/watch?v=8hiT7syquJk
Do a factory reset from your recovery. First hold together on off button and home button together your phone will reboot. When sonyericsson logo is displayed press the backkey repeatedly to reenter recovery!
Sent from my X10mini using XDA App
i try to do this but my phone is not going to recovery boot if you take a look to this video you will see my problem
http://www.youtube.com/watch?v=PhxN8IWwU24
thx for your answer!
FIXED with SEUS, now my phone is working and i will install MiniCM
Thx for your help guys !
i recently flash the ginger dx rom, but when i hit the reboot option on the recovery after flashing it, the phone won't start :S it keeps showing me an screen after the letter "sony ericsson" where only shows four distortioned orange androids, and after that the phone reboot itself and never start, is it brick or what? what can i do?? please help me! i don't have the bootloader unlock, and that rom says it work with the stock kernel, so i don't know whats going on
sorry, the problem was that i flash an x8 rom on my x10 mini pro :S i didn't see that when i was doing that :O..is the phone bricked? what can i do then?
try going to flash mode. mount your sd card copy the right rom and flash the right one.
demoniacs said:
try going to flash mode. mount your sd card copy the right rom and flash the right one.
Click to expand...
Click to collapse
but the problem is that i can't can enter recovery, or flash mode is other way? how can i enter flash mode?..because went i turn on the phone, and the letter sony ericsson appears, you suppose to hit the back key repeaditly, but nothing happens when i do that, it just appears the orange android i mentioned before
oh and sorry for the english XD
When you turn on the phone hold the back button
Sent from my U20i using XDA
Connect the phone on the PC when. You connect it press the power the home and the back buttons the same time when the phone is rebooting release the power and the home buttons but still pressing the back button and you can enter in the flash mode and use the flash tool to get your phone normally
Sent from my E10i using xda premium
Hi,
I have problem with my SE x10 mini.I flashed kernel E10_nAa-14_2.6.29.6-nAa-14 and i go to recovery and flashed rom miniCM 10.
Now i run phone and show logo Naa and show logo Cynogen mod.... iam waiting about 15 mins and always i see Cynogen men logo.
I hard reset mobile (center button + power) now i wont run phone and phone do nothing.No logo , No vibrate and I cant connect phone
to Flash mode (back button + usb).It do nothing.Can me anybody help plzz ?
Sorry for my bad english
supermancz said:
Hi,
I have problem with my SE x10 mini.I flashed kernel E10_nAa-14_2.6.29.6-nAa-14 and i go to recovery and flashed rom miniCM 10.
Now i run phone and show logo Naa and show logo Cynogen mod.... iam waiting about 15 mins and always i see Cynogen men logo.
I hard reset mobile (center button + power) now i wont run phone and phone do nothing.No logo , No vibrate and I cant connect phone
to Flash mode (back button + usb).It do nothing.Can me anybody help plzz ?
Sorry for my bad english
Click to expand...
Click to collapse
nAa-14 is for Gingerbread ROMS, ie, MiniCM7, if you want JellyBean you have to look for the nAa-JB kernel
To enter flashmode: Connect your usb-cable, press home and powerbuttons to reset, and then the back-button.
supermancz said:
Hi,
I have problem with my SE x10 mini.I flashed kernel E10_nAa-14_2.6.29.6-nAa-14 and i go to recovery and flashed rom miniCM 10.
Now i run phone and show logo Naa and show logo Cynogen mod.... iam waiting about 15 mins and always i see Cynogen men logo.
I hard reset mobile (center button + power) now i wont run phone and phone do nothing.No logo , No vibrate and I cant connect phone
to Flash mode (back button + usb).It do nothing.Can me anybody help plzz ?
Sorry for my bad english
Click to expand...
Click to collapse
you should flash nAn JB kernel for using miniCM10.
http://forum.xda-developers.com/showthread.php?t=1837135
SmG67 said:
nAa-14 is for Gingerbread ROMS, ie, MiniCM7, if you want JellyBean you have to look for the nAa-JB kernel
To enter flashmode: Connect your usb-cable, press home and powerbuttons to reset, and then the back-button.
Click to expand...
Click to collapse
Ye Ye but nothing will happen.I cant connect to falsh mode
I think the phone is frozen. Sometimes my X8 does that too, after a reboot, it freezes and the screen is off, and it doesn't do anything when I press any button (but it's turned on). I have to pull the battery out and put it back in and then it turns on properly. So I think you have to wait until the battery is fully discharged, so it turns off. Or maybe you can turn it off somehow, I don't know the X10 mini well. Or disassemble it and disconnect the battery.
ofc, thats bad, nAa 14 works only for gingerbread . . . what about seus ?
take some time to read the FAQs
flashtool will work anytime.
prepare flashtool with the kernel you want, and click flash button
force reboot (power+home) and plug the device to pc keeping back button pressed
after flash completed, reboot to recovery and wipe /system, /data, /cache, /dalvik-cache
install correct rom+ gapps.
enjoy
PS: your brick, is NOT a brick
supermancz said:
Hi,
I have problem with my SE x10 mini.I flashed kernel E10_nAa-14_2.6.29.6-nAa-14 and i go to recovery and flashed rom miniCM 10.
Now i run phone and show logo Naa and show logo Cynogen mod.... iam waiting about 15 mins and always i see Cynogen men logo.
I hard reset mobile (center button + power) now i wont run phone and phone do nothing.No logo , No vibrate and I cant connect phone
to Flash mode (back button + usb).It do nothing.Can me anybody help plzz ?
Sorry for my bad english
Click to expand...
Click to collapse
U just have to remove your battery. just open youe back cover then u will find a small rubber like thing near camera just open it and you will find batty connector.Now you just have to unplug it and again plug it.
Problem solved thanks for leylmaster. I wait for empty battery (freeze phone)
:beer:
Sent from my E10i using xda app-developers app