Hello,
i have a problem with my Sony Ericsson Xperia X10 mini, I flash the rom like a stupid with FreeX10 Froyo and I got no error but after I did reboot I see the SE image and is remain like this for 30sec and after this the phone is rebooting again and take over again and again and again.
can someone help me please!!!
http://www.youtube.com/watch?v=8hiT7syquJk
Do a factory reset from your recovery. First hold together on off button and home button together your phone will reboot. When sonyericsson logo is displayed press the backkey repeatedly to reenter recovery!
Sent from my X10mini using XDA App
i try to do this but my phone is not going to recovery boot if you take a look to this video you will see my problem
http://www.youtube.com/watch?v=PhxN8IWwU24
thx for your answer!
FIXED with SEUS, now my phone is working and i will install MiniCM
Thx for your help guys !
Related
Hello I'm in a very bad situation. I would try out a ROM for the first time. The ROM is MiniCM6-1.0.1. I booted into xRecovery and installed the .zip file. I pressed "reboot". It started up and the write SE logo apeared. The boot animation began and suddenly it froze. I don't know what I can do? I can't pull the battery out(Because its a X10 Mini). Nothing happends when i push at the screen or the buttons? Please help me!
plz plz plz
From http://forum.xda-developers.com/showpost.php?p=6985725&postcount=11
pulpoff said:
You can hard-reset the E10i (mini) by pressing power button while holding the "home" button (middle one)
So thats not a problem.
Click to expand...
Click to collapse
Don't know if that will help because I have an X10MP.
JacoboDK said:
Hello I'm in a very bad situation. I would try out a ROM for the first time. The ROM is MiniCM6-1.0.1. I booted into xRecovery and installed the .zip file. I pressed "reboot". It started up and the write SE logo apeared. The boot animation began and suddenly it froze. I don't know what I can do? I can't pull the battery out(Because its a X10 Mini). Nothing happends when i push at the screen or the buttons? Please help me!
plz plz plz
Click to expand...
Click to collapse
you forgot to do a full swipe after installing. try to enter xrecovery again and re install custom rom then do a full swipe before rebooting.
if you cant get into xrecovery then you have to roll back to 2.1 using SEUS
First, press power + home button. It will reboot your phone.
Then, go back to recovery and do a factory reset.
If it does not help, you can restore your backup.
If you didn't do a backup ,you need to re-flash it using SEUS.
Sent from my Xperia x10 mini using XDA Premium App
Thanks everybody Its working now;D
uhh...same problem with me here..I've got xrecovery installed, but at restart I can't get it to run...SEUS wont detect my phone either..please help somebody ...will it help if I get the battery removed and reinserted before plugging into SEUS (mine is just mini, so removing the batt is gonna be a bit problematic)..
uhh...same problem with me here..I've got xrecovery installed, but at restart I can't get it to run...SEUS wont detect my phone either..please help somebody ...will it help if I get the battery removed and reinserted before plugging into SEUS (mine is just mini, so removing the batt is gonna be a bit problematic)..
somebody please respond
i already install 1 of this custom rom (froyo), and this is the first time i tried, n after i install it, my phone stuck at SONY ERICSSON LOGO and restart again and again by itself...how do i resolve this...please anyone!!!
Use Sony Ericsson Update Service to reflash the phone to stock then try again making sure you install the custom rom correctly
And when you install the custom rom, before you reboot the device do a full system wipe as I had the same problem because I never done that
Sent from my U20i using XDA App
Solution
Install Sony Ericsson PC Companion. There is an option which allows you to update your phone, where there's also an option to repair it. Be advised that ALL your personal information (contacts, sms, mms, calendar) will be deleted. I hope you get your phone back.
If you want to install new custom ROMs, try following the procedure step by step. I have failed the first time (got the reboot loop), but then I have successfully updated my phone.
if you can't boot to recovery try this:
reconpt said:
to connect the phone use this:
put the seus ready to repair
connect the cable to phone and pc
press both midle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
Click to expand...
Click to collapse
thanks mate, that did it for me
i recently flash the ginger dx rom, but when i hit the reboot option on the recovery after flashing it, the phone won't start :S it keeps showing me an screen after the letter "sony ericsson" where only shows four distortioned orange androids, and after that the phone reboot itself and never start, is it brick or what? what can i do?? please help me! i don't have the bootloader unlock, and that rom says it work with the stock kernel, so i don't know whats going on
sorry, the problem was that i flash an x8 rom on my x10 mini pro :S i didn't see that when i was doing that :O..is the phone bricked? what can i do then?
try going to flash mode. mount your sd card copy the right rom and flash the right one.
demoniacs said:
try going to flash mode. mount your sd card copy the right rom and flash the right one.
Click to expand...
Click to collapse
but the problem is that i can't can enter recovery, or flash mode is other way? how can i enter flash mode?..because went i turn on the phone, and the letter sony ericsson appears, you suppose to hit the back key repeaditly, but nothing happens when i do that, it just appears the orange android i mentioned before
oh and sorry for the english XD
When you turn on the phone hold the back button
Sent from my U20i using XDA
Connect the phone on the PC when. You connect it press the power the home and the back buttons the same time when the phone is rebooting release the power and the home buttons but still pressing the back button and you can enter in the flash mode and use the flash tool to get your phone normally
Sent from my E10i using xda premium
Hi
I'm pretty sure I'm posting an extremelly noob question-cry for help.
Two days ago I tried to change the rom on my X10 mini pro. the bad thing is that I used wrong rom file possibly a rom file for the X8 and after that I'm stucked in an eternal loop sequence. The device dispays SE logo on boot and after a couple of seconds starts to load the ROM however since the rom is failed to load the system reboots after few seconds.
The bad thing is that the back key compination (five times back) doesnt obey and I can't enter to xRecovery.
I also tried SE PC Companion and Flashtool but the loop sequence disconnects the device before I try to send any command.
Any Ideas to save my phone?
In order to enter flashmode, do he following: Press the Power, Home and Back buttons simultaneously. as soon as your screen goes black, release the Power and Home buttons and keep backbutton pressed.
If you want to repair with PC Companion, keep your phone disconnected from the pc until it asks to connect it in flashmode
I really want to thank all the members here on the community.
After of few (maybe lot of) tries I managed to restore my device back to its original stock ROM.
Many Thanks
Hey buddie use the SEUS (Sony Ericsson Update Service).
I also made a similar mistake.
don't worry just use seus n it'll solve ur problem
Hit thanks if it was helpful
Hi,
I have problem with my SE x10 mini.I flashed kernel E10_nAa-14_2.6.29.6-nAa-14 and i go to recovery and flashed rom miniCM 10.
Now i run phone and show logo Naa and show logo Cynogen mod.... iam waiting about 15 mins and always i see Cynogen men logo.
I hard reset mobile (center button + power) now i wont run phone and phone do nothing.No logo , No vibrate and I cant connect phone
to Flash mode (back button + usb).It do nothing.Can me anybody help plzz ?
Sorry for my bad english
supermancz said:
Hi,
I have problem with my SE x10 mini.I flashed kernel E10_nAa-14_2.6.29.6-nAa-14 and i go to recovery and flashed rom miniCM 10.
Now i run phone and show logo Naa and show logo Cynogen mod.... iam waiting about 15 mins and always i see Cynogen men logo.
I hard reset mobile (center button + power) now i wont run phone and phone do nothing.No logo , No vibrate and I cant connect phone
to Flash mode (back button + usb).It do nothing.Can me anybody help plzz ?
Sorry for my bad english
Click to expand...
Click to collapse
nAa-14 is for Gingerbread ROMS, ie, MiniCM7, if you want JellyBean you have to look for the nAa-JB kernel
To enter flashmode: Connect your usb-cable, press home and powerbuttons to reset, and then the back-button.
supermancz said:
Hi,
I have problem with my SE x10 mini.I flashed kernel E10_nAa-14_2.6.29.6-nAa-14 and i go to recovery and flashed rom miniCM 10.
Now i run phone and show logo Naa and show logo Cynogen mod.... iam waiting about 15 mins and always i see Cynogen men logo.
I hard reset mobile (center button + power) now i wont run phone and phone do nothing.No logo , No vibrate and I cant connect phone
to Flash mode (back button + usb).It do nothing.Can me anybody help plzz ?
Sorry for my bad english
Click to expand...
Click to collapse
you should flash nAn JB kernel for using miniCM10.
http://forum.xda-developers.com/showthread.php?t=1837135
SmG67 said:
nAa-14 is for Gingerbread ROMS, ie, MiniCM7, if you want JellyBean you have to look for the nAa-JB kernel
To enter flashmode: Connect your usb-cable, press home and powerbuttons to reset, and then the back-button.
Click to expand...
Click to collapse
Ye Ye but nothing will happen.I cant connect to falsh mode
I think the phone is frozen. Sometimes my X8 does that too, after a reboot, it freezes and the screen is off, and it doesn't do anything when I press any button (but it's turned on). I have to pull the battery out and put it back in and then it turns on properly. So I think you have to wait until the battery is fully discharged, so it turns off. Or maybe you can turn it off somehow, I don't know the X10 mini well. Or disassemble it and disconnect the battery.
ofc, thats bad, nAa 14 works only for gingerbread . . . what about seus ?
take some time to read the FAQs
flashtool will work anytime.
prepare flashtool with the kernel you want, and click flash button
force reboot (power+home) and plug the device to pc keeping back button pressed
after flash completed, reboot to recovery and wipe /system, /data, /cache, /dalvik-cache
install correct rom+ gapps.
enjoy
PS: your brick, is NOT a brick
supermancz said:
Hi,
I have problem with my SE x10 mini.I flashed kernel E10_nAa-14_2.6.29.6-nAa-14 and i go to recovery and flashed rom miniCM 10.
Now i run phone and show logo Naa and show logo Cynogen mod.... iam waiting about 15 mins and always i see Cynogen men logo.
I hard reset mobile (center button + power) now i wont run phone and phone do nothing.No logo , No vibrate and I cant connect phone
to Flash mode (back button + usb).It do nothing.Can me anybody help plzz ?
Sorry for my bad english
Click to expand...
Click to collapse
U just have to remove your battery. just open youe back cover then u will find a small rubber like thing near camera just open it and you will find batty connector.Now you just have to unplug it and again plug it.
Problem solved thanks for leylmaster. I wait for empty battery (freeze phone)
:beer:
Sent from my E10i using xda app-developers app