k after i finally succeeded to downgrade (thinkin that the hard part is done!!!!), i cant get past step 1, i keep gettin either "waiting for device", or htc black screen, or nothing happens. step 2 is even worse, all i get is "device not found", or loads of "FAILED". ive reinstalled htc sync 2, uninstalled htc drivers.
i think it seems that my computer is not recognising the phone as an android device, cos everytime i connect it, win7 seems to automatically install drivers (nd i cant stop that) and recognises it as HTC ANdroid Device (it appears as a "Disk Drive")..... tried to use htc sync, phone keeps searching nd it fails.. help please i cant use my phone
ive managed to install adb drivers but it only recognises phone when is turned on normally, but wen i go into fastboot or recovery, it doesnt show any adb devices....
do i hav 2 install drivers 4 each mode????? id pay sum1 2 do this 4 me.
comon ppl, i will actually give u sum money if u help me out through the whole thing, (no joke)
updatE: done step 1, but step 2 cant be done cos computer doesnt recognise the phone as android in recovery mode.....it comes up as usb mass storage nd i try to update drivers nd comes up with error...
try running another OS...
i had problems with mine as well on win7 32 bit... so i used winxp on vmware
and everything went smoothly...
make sure you get the HTC Sync 2.33 or you can use PDANET to install the drivers
installed pdanet, same thing, evverything is awsome till i enter recovery wher the stupid **** drivers turn into "mass storage" and the android phone disappears....(using vista 32 now)
saifbunni said:
installed pdanet, same thing, evverything is awsome till i enter recovery wher the stupid **** drivers turn into "mass storage" and the android phone disappears....(using vista 32 now)
Click to expand...
Click to collapse
Try booting to normal mode, then connect the device to the computer as a removable disk (or connect your sdcard to the computer with an sdcard to usb adapter)
After that, put on your sdcard the recovery update.zip found here:
http://forum.xda-developers.com/showthread.php?t=969076
after that, boot in recovery. press vol-up + power and choose "apply sdcard:update.zip"
Then you'll get a CWM recovery menu where you can install any ROM (should put the ROM on the sdcard ofcrouse), and that saves you from running step2.
oh great stuff, i pressed apply update, then i get "signature verification failed", this seems way better than havin 2 go through step 2. how do i fix it though? thx 4 reply
also it says E: cant open cache/recovery/command
its not workin man, any1 ?????
Try using this one - http://www.megaupload.com/?d=TXYUQUOP
(it's 100% working)
About "E: cant open cache/recovery/command" ignore it
thats the same 1, i replaced it, nd still doesnt work man. still "signature verification failed"
also do i need 2 do step 1 again like if i boot phone into normal, then come back to it, will that affect step 1? maybe thats y?
Are you sure step1 was finished successfully?
When you run it you need to make sure in the CMD window that there isn't any FAILED at the end
didn't understand your second sentence
omg it turns out that it didnt step 1 cos i didnt insert the goldcard (i feel stooopid)
now all is good, i got into the recovery menu nd now installing new rom. one thing, do i need to wipe cache or play with the other options before installing new rom??? or do i just press install zip from sdcard? thx 4 help, finally sumthing
Do data+cache wipe (if you're using the update.zip method of recovery, I think that the wipe data also wipes the cache) and only then install new ROM
WOAAH BETSY! Backup first before anything! Save the backup to your pc in case you mess anything up! Then wipe cache, and everythign you can wipe (besides SDCARD)
So does yo daddy
Sent from my NookColor using XDA Premium App
Sorry my friend got on my phone ...
Sent from my SCH-I500 using XDA Premium App
Related
Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
fizzle101 said:
Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
Click to expand...
Click to collapse
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Can you try booting in fastboot and tell me if that is recognized?
it still doesnt recognize it in fastboot
fc_Kuro said:
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Click to expand...
Click to collapse
i have tried that and it doesnt help
fizzle101 said:
i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message
Click to expand...
Click to collapse
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
ok i will give that a try
crk23 said:
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
Click to expand...
Click to collapse
that didnt work. o well i guess i am stock with the rom i have there.
fizzle101 said:
that didnt work. o well i guess i am stock with the rom i have there.
Click to expand...
Click to collapse
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
robocik said:
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
Click to expand...
Click to collapse
i have tried everything. changed the cable, used different pc but nothing works. i think is a hardware problem, something might be broken inside or something like that
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
baklap said:
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
Click to expand...
Click to collapse
No i havent and i gave up trying because i dnt think there is a fix for it. if yours is unrooted and the warranty is still valid you should consider returning it to HTC maybe they might replace it
got the same problem. Any solution so far ??
ddotpatel said:
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
Click to expand...
Click to collapse
Did you try that?..... You need to do the reboot PC/Laptop after uninstalling ALL HTC drivers! Then when you reboot PC, plug phone back in, should say "not recognised" again,... then follow BTDAG's guide. T'is definitely a driver issue!
tried flashing 3 roms, modaco, radug and now kimera... none working.
can connect in fastboot, it shows up in device manager as android 1.0
ive tried 3 different usb cables and 4 differet pcs, still there is no response on my phone !!!
using villian rom 10.0 rite now.
okay it boots up into fastboot and fastboot usb shows up on the screen in red,
BUT when i use the "adb devices" command in adb it doesnt show the device,
it is showing as android 1.0 in devices and printers (windows 7)
You need to use....
fastboot devices
....when your are in fastboot.
What happens when you go into your recovery, select "Toggle MS/USB" with USB connected to PC?
okay
fastboot devices command shows some serial number.
then i tried adb remount, it gave an error....
enabling usb-ms with cable attached gives no response
ok i think it might be USB driver like ddotpatel said but i am not sure.
i reinstalled my whole windows 7 to 32bit now instead of the 64bit version i was using before and today i just connected my hero to my PC and windows 7 did its thing and installed the drivers and finally my hero can mount the SD card in my PC again although i kept getting this can perform faster in USB 2.0 port or something like that i didn’t care as long as i can mount my SD card again.
now went into fastboot and used the fastboot device command and i could see my hero serial no. but when i try to flash the amonra recovery i got the permission error (i cant really remember). i tried flashing using the adb method but still no luck.
so i went to market and downloaded rom manager and used it to flash clockwork recovery and now i could boot to clockwork recovery.
from this recovery i can now flash any rom i want and although there are still a few more problems i am glad now that i can flash custom roms again.
the problem i can see so far but i can deal with is
1. i don’t think fastboot commands work even if the phone is detected.
2. SD card mounts at USB 1.1 speed. (i have tried different ports and cable but still the same thing and this is the ports i use for my N1, Desire and my other android phones with USB 2.0 speed)
PS: adb commands for pushing and removing apps is working.
Hope this can be helpful to those experiencing the same problem.
Instead of re-installing your entire OS just use usbdeview to remove the failing drivers.
Also remove any old HTC Sync installs and install the latest version.
i have a htc legend with Blayo's 0.8 rom.
for a couple of weeks all works perfect but suddenly one day when i connected the htc to pc with USB cable nothing happened, only started to charge the battery. in the past the phone used to show a menu for choosing what type of connection had to use, but now didn't show anything.
i tried to reinstall HTCSync and the SDK but nothing changes.
i also tried with different usb cables but nothing
it's my legend bricked??
try to change the default connection type in Settings - Connect to PC..
i tried too but nothing changes
Try file expert or alternative, they have samba built in so you can ftp to your phone
Sent from my Legend using xda premium
yeah i'm Software Data Cable to send and recive files from Legend but if i want to change the rom i can't do it because pc doesn't detect the legend in fastboot and can't enter to recovery
roomm said:
yeah i'm Software Data Cable to send and recive files from Legend but if i want to change the rom i can't do it because pc doesn't detect the legend in fastboot and can't enter to recovery
Click to expand...
Click to collapse
why use cable? It´s so stoneage use wifi, and swiFTP app on your mobile and filezilla ftp on your pc to transfer your files. Then cmw to flash a new rom, you don´t have to be plugged in with your pc for that
Software Data Cable is like swiFTP, i can access my sdcard with filezilla.
the problem is that when i try to access to recovery to flash a new rom a triangle with a red exclamation appears and i have to push recovery from pc. i think that i don't have the recovery installed in my legend or something like that. with Rom Manager doesn't work, the same thing :S
roomm said:
Software Data Cable is like swiFTP, i can access my sdcard with filezilla.
the problem is that when i try to access to recovery to flash a new rom a triangle with a red exclamation appears and i have to push recovery from pc. i think that i don't have the recovery installed in my legend or something like that. with Rom Manager doesn't work, the same thing :S
Click to expand...
Click to collapse
When you get the triangle, have you tried push the volume button up and powerbutton.. ? What does rom manager say, you have installed cmw recovery?
mmmm i will try it! thnx!
EDIT: when i push volume up and powerbutton says: E:Can't oen /cache/recovery/command at the bottom of the screen. in the top a recovery like menu appears with Reboot system, apply sdcard:update.zip, wipe data/factory reset and wipe cache partition :S
NOOB ANSWER TIME:
Dunno if this is correct, but hey, we all learn, eh?
Make sure you have the correct version of CWM as an update.zip in the root of your SD. Then when you press VOL UP + PWR, choose to apply sdcard:update.zip. You'll launch into recovery from there.
oh! thank you! i didn't know that! i can enter into recovery! i want another rom, any recommendation? ( CM7 no please ) i think installing a new rom could fix the problem with the usb!
awww, man. did you try searching first before posting your problem? your phone isn't bricked. what you have is what's called around here as 'usb brick'. now, go here and get bzzzzz...
mm i think i don't have usb brick, because when USB Brick occurs pc can detect the htc in fastboot but i can't so i can't do the steps to fix the problem :S
any idea?
it's possible that the usb connector is broken?
Maybe there are someting wrong with your hardware....You may need to find the Costomer Service....
Sent from my HTC Legend using xda premium
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
tlkh said:
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
Click to expand...
Click to collapse
Repair it using PCCompanion
Adding to that, you may also find it easier to do it on a windows-based pc.
This is caused by did the full wipe and then reboot the phone. At this time, there is no system files in the phone so it won't boot. Need to repair using PC Companion or SEUS or Flash Tool.
Sent from Xperia X10 Self-modded
Hi,I am this friend who cleverly full wiped with xRecovery.However, my windows7 computer still cant detect my phone,and proves to be a problem.Anyone can help me by giving me a step by step in getting my phone back into flashable mode? or help fix this?
Same kind of problem here with a friend's phone I usualy use a htc desire.
He updated hi X10i (stock, not rooted), since then there's no boot, only exclamation mark for a few secs, and no usb.
I tried "<="+usb/power on -> exclamation mark, no recovery.
It's not detected in any way by my pc (installed sony tools etc...), windows or linux (no kernel message at all), same usb port, same cable, my htc phone works in both.
What can I do ?
Thanks !
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
mugsy730 said:
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
Thank you, i read a little about this but i'm affraid my problem is "before" any software since my phone is not detected by my system, neither running windows 7 nor linux.
It does not turn on when pushing "<-" and pluging usb.
9andar said:
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
Click to expand...
Click to collapse
hey i tried to installed the rom you are currently using and i have my bootloader locked and when i was promted to setup the installation the touch on my phone was not responding and it seems that i just clicked on next and also appears that because of that my phone not is just stuck at logo, hope you can give a tip on how to instal this rom
Hello,
my device (i9300) as mentioned above got stuck in a boot loop.
First I did was I installed the latest pac-man ROM from here. After successful testing I decided to flash the latest OmniRom 4.4 from here.
Now here comes the dilemma with: My Failure was that I had a old Recovery (CWM-based Recovery v5.5.0.4) and I didn't see the point where it says that I have to update it first.
My USB Connection to my PC was already broken before I started to flash any of the ROMs. So I can't connect to the PC to flash via Odin. It fails on the driver installtion. (I copied everything in my cloud and downloaded it to the internal sd)
The Device Manager shows alwas a ! in a yellow triangle near the "Samsung Mobile USB CDC Composite Device" (Download Mode) with a errer code 10: Device cannot start. I did millions of solutions but nothing worked against this issue ...
Currently my device starts where the Samsung galaxy s3 logo pops up, get stuck by that with a red 1 on the upper left corner and boots into the "old" recovery.
This is my Problem. Please help me to fix this (and the USB bug).
Thank you very much
Kind regards,
A.R.Cante
A.R.Cante said:
Hello,
my device (i9300) as mentioned above got stuck in a boot loop.
First I did was I installed the latest pac-man ROM from here. After successful testing I decided to flash the latest OmniRom 4.4 from here.
Now here comes the dilemma with: My Failure was that I had a old Recovery (CWM-based Recovery v5.5.0.4) and I didn't see the point where it says that I have to update it first.
My USB Connection to my PC was already broken before I started to flash any of the ROMs. So I can't connect to the PC to flash via Odin. It fails on the driver installtion. (I copied everything in my cloud and downloaded it to the internal sd)
The Device Manager shows alwas a ! in a yellow triangle near the "Samsung Mobile USB CDC Composite Device" (Download Mode) with a errer code 10: Device cannot start. I did millions of solutions but nothing worked against this issue ...
Currently my device starts where the Samsung galaxy s3 logo pops up, get stuck by that with a red 1 on the upper left corner and boots into the "old" recovery.
This is my Problem. Please help me to fix this (and the USB bug).
Thank you very much
Kind regards,
A.R.Cante
Click to expand...
Click to collapse
To fix the USB bug, you must uninstall that driver and download the driver ( try to install kies for example )
To fix the bootloop try to do a full wipe in recovery mode
abidifethi said:
To fix the USB bug, you must uninstall that driver and download the driver ( try to install kies for example )
To fix the bootloop try to do a full wipe in recovery mode
Click to expand...
Click to collapse
None of your advices worked. I did unistall all drivers and also Kies. Reinstalled and it doesn't worked. So I uninstalled it again and installed only the drivers but this didn't worked too.
Everytime I uninstall the drivers and connect the device to the PC it is trying to Install the Drivers over Windows Update and Kies isn't reacting at all.
Now since I wiped data/factory reset, cache partition, dalvik cache and formated /system and /preload my device won't start automatically in the recovery anymore. It get stuck on the Samsung Galaxy SIII Logo with the red 1 in the upper left corner. To Access to the Recovery I have to take the battery out and and insert it again and press volume up + home + power.
What can I do now?
Thanks in advance
A.R.Cante said:
None of your advices worked. I did unistall all drivers and also Kies. Reinstalled and it doesn't worked. So I uninstalled it again and installed only the drivers but this didn't worked too.
Everytime I uninstall the drivers and connect the device to the PC it is trying to Install the Drivers over Windows Update and Kies isn't reacting at all.
Now since I wiped data/factory reset, cache partition, dalvik cache and formated /system and /preload my device won't start automatically in the recovery anymore. It get stuck on the Samsung Galaxy SIII Logo with the red 1 in the upper left corner. To Access to the Recovery I have to take the battery out and and insert it again and press volume up + home + power.
What can I do now?
Thanks in advance
Click to expand...
Click to collapse
Try to download any custom ROM if you don't done yet and put it in your external sd card ( use an other phone or card reader ) and now try to enter in recovery mode and install it and let us know the result
abidifethi said:
Try to download any custom ROM if you don't done yet and put it in your external sd card ( use an other phone or card reader ) and now try to enter in recovery mode and install it and let us know the result
Click to expand...
Click to collapse
I tried this now on my Desktop Computer and it worked fine. I didn't need to install drivers manually. It installed it by itself and therefore i was able to use odin!
I flashed the new recovery and put the omnirom and pa-gapps on my sd card (I also tried this on my notebook but my card reader is maybe broken)
so i installed teamwin recvovery over pc, put rom and gapps on my sd card and flashed them over recovery.
Now all works fine.
Thank you for your help.
But what I don't understand is my Win 7 OS (32 bit) is recently set up on my VM everything was fresh but it didnt recognized my device... Google says a lot of people are having this issues. I've tried everything whenever I found allegedly a solution for this problem. None of them worked. I simply switched the computer and everything is fine. This is ridiculous. One year ago, when I had running windows as main OS, there were no problems at all. If the problem was caused by a virtual machine I think that not many people would complain about this issue.
Kind regards
Why would old Win 7 recognize your device unless you install drivers .
JJEgan said:
Why would old Win 7 recognize your device unless you install drivers .
Click to expand...
Click to collapse
I don't really understand your comment. The Problem of this USB error has no root. When your Windows System says error code 10: device cannot start then you have a big problem because you don't know why and how to fix this. Try and Google this. You will find thousands of people complaining the same error. Everyone has other solutions for that. Some edit their registry, others simply do a soft-reset and try another USB-Port.
Samsung support can't help you at all because they don't know why this is happening. And the solving of this problem is really random. i tried for hours to solve this with no success (except switching to another computer).
Windows says on my laptop the device cannot start but it is perfectly connecting to my other computer. How can this happen? I don't know. Maybe the error code 10 is not that specific and there is something other wrong than my device.
The titel says it all , and I need some help. I can still go in recovery but adb won't recongize my HTC, but I can still find it in fastboot. I formatted the sdcard, so I have nothing on there. Help would be much appreciated.
vsp33ddyv said:
The titel says it all , and I need some help. I can still go in recovery but adb won't recongize my HTC, but I can still find it in fastboot. I formatted the sdcard, so I have nothing on there. Help would be much appreciated.
Click to expand...
Click to collapse
Oh, trust me that's not your phone being bricked. You guys seriously need to know the correct vocabulary.
Bricking the phone: The phone's only use is to use it as a literal brick. It does not turn on, does not recover, does not charge, does not do anything and it can never be restored.
HOX+ can NOT be bricked unless you are S-Off'ed. Now that we got that out of the way,
you seem to understand that ADB is the solution here, that you need to sideload a rom, the question that you have is the adb does not recognize your phone, so follow these steps:
-Connect the phone using a different usb port, (basically thats the easiest thing), if its 2.0 then try 3.0 and vice versa.
-Restart your computer
-Restart your phone
-If you are on windows Vista and later, open start menu search for "cmd" then right click and run it as administrator, then you need to cd to your adb directory.
Code:
cd C:\Android\sdk\platform-tools
for example. then try adb devices.
Anyway hope you get it to work and have fun
Ghand0ur said:
Oh, trust me that's not your phone being bricked. You guys seriously need to know the correct vocabulary.
Bricking the phone: The phone's only use is to use it as a literal brick. It does not turn on, does not recover, does not charge, does not do anything and it can never be restored.
HOX+ can NOT be bricked unless you are S-Off'ed. Now that we got that out of the way,
you seem to understand that ADB is the solution here, that you need to sideload a rom, the question that you have is the adb does not recognize your phone, so follow these steps:
-Connect the phone using a different usb port, (basically thats the easiest thing), if its 2.0 then try 3.0 and vice versa.
-Restart your computer
-Restart your phone
-If you are on windows Vista and later, open start menu search for "cmd" then right click and run it as administrator, then you need to cd to your adb directory.
Code:
cd C:\Android\sdk\platform-tools
for example. then try adb devices.
Anyway hope you get it to work and have fun
Click to expand...
Click to collapse
The only thing I can do is use fastboot , thx for noticing that I know I need adb sideload If I look in devices on my PC I can see 'ONE' with a yellow triangle next to it ( so this means drivers) I downloaded my HTC drivers and I right clicked on the device and then update from PC , I go to the folder where I installed it and click on search and it says it can't find a driver for this device.
I also tried 4 different USB ports both 2.0 or 3.0 , no result. I also tried to install TWRP instead of cmw but on TWRP my touchscreen doesn't work while on cmw it does. So i went back and flashed my recovery to cmw again ( I tried version 2.6 - 2.7.0.1 , no result )
So my problem right now can be solved once my device can be recognized by my PC. (Have HTC maneger installed , also downloaded drivers formy phone , got fastboot and adb on my PC )
For anyone who knows thanks
vsp33ddyv said:
The only thing I can do is use fastboot , thx for noticing that I know I need adb sideload If I look in devices on my PC I can see 'ONE' with a yellow triangle next to it ( so this means drivers) I downloaded my HTC drivers and I right clicked on the device and then update from PC , I go to the folder where I installed it and click on search and it says it can't find a driver for this device.
I also tried 4 different USB ports both 2.0 or 3.0 , no result. I also tried to install TWRP instead of cmw but on TWRP my touchscreen doesn't work while on cmw it does. So i went back and flashed my recovery to cmw again ( I tried version 2.6 - 2.7.0.1 , no result )
So my problem right now can be solved once my device can be recognized by my PC. (Have HTC maneger installed , also downloaded drivers formy phone , got fastboot and adb on my PC )
For anyone who knows thanks
Click to expand...
Click to collapse
Hmmm. I would say in the device manager right click on the one and uninstall. Then in fastboot mode unplug and replug the device, let it install fastboot again and then try if adb can read it now.
Ghand0ur said:
Hmmm. I would say in the device manager right click on the one and uninstall. Then in fastboot mode unplug and replug the device, let it install fastboot again and then try if adb can read it now.
Click to expand...
Click to collapse
Still can't read it...
This has happened to my phone twice... fixed it the first time by using USB deview to remove all Android/HTC drivers, then reinstalled them with the HTC Sync installer. Couldn't get that to fix it last time though, so I tried another computer and it worked just fine. So my advice would be to find another computer and try it.
911jason said:
This has happened to my phone twice... fixed it the first time by using USB deview to remove all Android/HTC drivers, then reinstalled them with the HTC Sync installer. Couldn't get that to fix it last time though, so I tried another computer and it worked just fine. So my advice would be to find another computer and try it.
Click to expand...
Click to collapse
YES THIS IS WHAT WORKED ONLY I DID SOME OTHER STEPS TOO!!! Now I got adb running again and I can only push , I'll explain later in a full tutorial how to fix this now you guys can help me , I'm trying to download a cyanmod for my HTC because the stock is german and I can't download it , so can anyone upload the cyanmod endeavouru for me I keep getting error 502 bad gateway I almost fixed it !!!!! I need it badly !
OOkay so I thought I had figured it out , I uste TWRP to push files from PC to my Phone , then I installed cmw and tried to install the ROMS , but apperantly my roms were deleted. (I can't use TWRP because I need touch and the touch doesn't work , while in cmw the touch does work)
So if we can fix the TWRP touch I will know how to fix my problem !
I fixed the problem
I fixed the problem , thread how comming soon !
Here is my thread http://forum.xda-developers.com/showthread.php?p=52550145