Soooooooo I caved hearing that 2.2 would be out for the Streak and went and picked one up on AT&T. Thinking hacking it and putting a 2.2 ROM on there would be cake....after all I'm in IT. LOL yeah right. Anywho got no where with trying to get to 2.1 yet alone get to 2.2. So thought someone had to have a way to get ahold of an official Froyo for the Streak. So by using someone else's baseband version I was able to Dl the .pkg from Dell here: httpCOLON//mobileupdate.dell.com/?version=GAUSB1A111100[/url]
Sooooooo wondering would it work if I DLed that then put it in the root of the SD card and renamed it to Update.pkg, booted the phone in fastboot mode then updated it via the Update.pkg? That can't work, right? That just seems to easy. Dieing over here to get ahold of an official 2.2 build so I can get my exchange to work natively for work. AT&T has now blocked my iPhone from getting on the network so I can't revert waiting for the formal OTA to come out.
I'm a newb when it comes to android (just got my streak 3 hours ago) and I tried what you have stated and was greeted to "FOTA Version Mismatch... Shutting down device in 30 seconds"
Did you flash the clockwork recovery ?
Search for a link to the QDL repair tool, once you get the driver loaded, it's a simple one click solution to getting 2.2
After that, just use any of the links here to download the 318 version, and then you'll have the updated 2.2, or after getting the base 2.2 (308?), just download DJ Steve's updated version.
rahulkadukar said:
Did you flash the clockwork recovery ?
Click to expand...
Click to collapse
Yeah ive flashed clockwork recovery and that is successful. Once I go into fastboot mode and do the update.pkg part it errors on the install.
just follow the steps in the thread "updating and downgrading your streak" i followed the steps to get the UK stock 2.1 rom.. then i daringly tried the OTA update and it worked like a charm. im now running the UK stock 2.2 rom thats rooted.
As I've said before:
I had this problem also....The only thing that fixed it for me was using the QDL Tool. It took my dead Streak with flashing light with God-only-knows what baseband and ROM sequence I had tried to a fully functioning, unlocked Streak with AT&T official 2.2 on an unlocked 00 baseband. From there, it was an incredibly simple flash to DJ Steve's 1.5.1 using fastboot. Then I was done. No clockwork, no recovery, no nandroid, no nothing. Just follow the instructions for QDL Tool. I'm serious.
Doctor_Watson said:
As I've said before:
I had this problem also....The only thing that fixed it for me was using the QDL Tool. It took my dead Streak with flashing light with God-only-knows what baseband and ROM sequence I had tried to a fully functioning, unlocked Streak with AT&T official 2.2 on an unlocked 00 baseband. From there, it was an incredibly simple flash to DJ Steve's 1.5.1 using fastboot. Then I was done. No clockwork, no recovery, no nandroid, no nothing. Just follow the instructions for QDL Tool. I'm serious.
Click to expand...
Click to collapse
are you also saying that it unlocked your phone? oO?
It flashes a pre-release of v2.2 with a generic baseband, not locked to a particular carrier. The Sim Lock is still in place, however, so the phone itself will still require an unlock code if it did before.
http://forum.xda-developers.com/showthread.php?t=805112
I had Streakdroid 1.80.
Follow the directions above but only the last OC 1.6 to At&t 1.6
Make sure you have OEM recovery flashed. Streakmod etc wont work.
Put the 3 files on your current system. And the new rom on the SD.
Flash the boot.ing as instructed and then restart your current rom. After it finishes turn on development in the applications settings. Then reboot into recovery. Then install from update.apk this will install the new AT&T rom. If if fails flash boot.img again and repeat.
FYI: the new 340 does not look any different then the 318 or 170 for that matter.
DJ's roms are better and faster. But if OEM is your desire do this.
I'm on 2.2 318 and am trying to go back to stock 1.6 but after extracting all the system files to the sd, completing the steps for that and flashing the new boot.img- I can't get my Streak to boot fully into Android to apply the 1.6 update.... If I try to boot it sticks at the Dell logo, no animation, just the logo with all 3 soft keys lit. If I go into Recovery and try to apply the update, I get a signature verification failure error. I also tried a factory reset from Recovery but cannot get passed the logo.
I have done this a trillion times before without any issues. Why won't it cooperate now? I have one of the temperamental Streaks that only likes Official Stock ROMs. I get FCs and freezes out the whazoo on anything but so thats why I am going to Stock AT&T 1.6 and update to their 2.2...
rnj79 said:
I'm on 2.2 318 and am trying to go back to stock 1.6 but after extracting all the system files to the sd, completing the steps for that and flashing the new boot.img- I can't get my Streak to boot fully into Android to apply the 1.6 update.... If I try to boot it sticks at the Dell logo, no animation, just the logo with all 3 soft keys lit. If I go into Recovery and try to apply the update, I get a signature verification failure error. I also tried a factory reset from Recovery but cannot get passed the logo.
I have done this a trillion times before without any issues. Why won't it cooperate now? I have one of the temperamental Streaks that only likes Official Stock ROMs. I get FCs and freezes out the whazoo on anything but so thats why I am going to Stock AT&T 1.6 and update to their 2.2...
Click to expand...
Click to collapse
Try using the repair tool that will put a 2.2 rom on it.
You don't have to go to stock 1.6. Just follow the instructions on your current system and it will let the new AT&T 2.2 install. I always to a factory reset before installing a new rom. That stops FCs for me.
derechbennoach said:
http://forum.xda-developers.com/showthread.php?t=805112
I had Streakdroid 1.80.
Follow the directions above but only the last OC 1.6 to At&t 1.6
Make sure you have OEM recovery flashed. Streakmod etc wont work.
Put the 3 files on your current system. And the new rom on the SD.
Flash the boot.ing as instructed and reboot into recover. It will install the new AT&T rom. If if fails flash boot.img again and repeat.
FYI: the new 340 does not look any different then the 318 or 170 for that matter.
DJ's roms are better and faster. But if OEM is your desire do this.
Click to expand...
Click to collapse
Hi -
Could you be more specific on "OEM recovery"?
I have downgraded from 318 all the way back to US OEM 1.6 with BB of 31 which matches OEM version. Build number 6601. btw: I had to do a Nandroid flash to get it to 1.6.
It downloads the 340 update fine but gets hung up on the install process - stuck on logo.
Seems like I need to flash the right recovery but I always get a blank screen when I boot into recovery and choose update from SD card.
Can you link me to the right recovery file?
Thanks.
derechbennoach said:
Try using the repair tool that will put a 2.2 rom on it.
You don't have to go to stock 1.6. Just follow the instructions on your current system and it will let the new AT&T 2.2 install. I always to a factory reset before installing a new rom. That stops FCs for me.
Click to expand...
Click to collapse
I do have a 2.2 rom installed already. I used the QDL tool to get it there so I shouldn't have to do it again... I tried updating to AT&T's new 2.2 yesterday from the 2.2 (318) I am currently on but it won't let me. I thought I had to go back down to 1.6 and get my update via notification but now my Streak wont get off the logo.
I hope this is making sense because from what you said, I don't think it does. Its hard to type what my problem is in a way that all can understand.
I am on Rogers and had the same problem. Was on 2.2 through QDL tool. I got an email from Rogers that their official 2.2 update was now available.
Downloaded the update, it wouldn't install.
Probably because baseband is different?
Anyway, did the same thing, tried downgrade back to O2's 1.6, then hopefully AT&T's 1.6, but got stuck after getting down to 2.1. Black screen during update.pkg, Dell logo only when just doing a normal boot.
Tried loading 1.6, 2.1 Rom's again to no avail.
Managed to get the phone working again using the QDL tool to get back to 2.2.
Tried doing the Rogers update again, but not working.
Help!
eugenekim618 said:
I am on Rogers and had the same problem. Was on 2.2 through QDL tool. I got an email from Rogers that their official 2.2 update was now available.
Downloaded the update, it wouldn't install.
Probably because baseband is different?
Anyway, did the same thing, tried downgrade back to O2's 1.6, then hopefully AT&T's 1.6, but got stuck after getting down to 2.1. Black screen during update.pkg, Dell logo only when just doing a normal boot.
Tried loading 1.6, 2.1 Rom's again to no avail.
Managed to get the phone working again using the QDL tool to get back to 2.2.
Tried doing the Rogers update again, but not working.
Help!
Click to expand...
Click to collapse
I can't get mine to boot normal unless I use the QDL tool to pull it out of the logo screen. If we already have a US Basdeband we shouldn't have to upgrade to O2 and back down again, right?
What do the people, like myself, do who are on the 2.2 318 via QDL Tool build to get the AT&T 2.2 rom released yesterday?? I am already on a US AT&T rom so what sense does it make to have to upgrade to an O2 rom and go back to AT&T (I am thinking out loud...).
I don't want Steve's ROM or anything else... my phone does not play well with those. I want the new official 2.2 released to AT&T locked Streaks.
rnj79 said:
I do have a 2.2 rom installed already. I used the QDL tool to get it there so I shouldn't have to do it again... I tried updating to AT&T's new 2.2 yesterday from the 2.2 (318) I am currently on but it won't let me. I thought I had to go back down to 1.6 and get my update via notification but now my Streak wont get off the logo.
I hope this is making sense because from what you said, I don't think it does. Its hard to type what my problem is in a way that all can understand.
Click to expand...
Click to collapse
There are three files that need to be in place. and a boot.img file that is installed from fastboot.
http://forum.xda-developers.com/showthread.php?t=805112
Look at what he says to do the the 1.6 non at&t rom and do that to any 2.2 and it worked.
But really 318 is that same thing. and Streakdroid 1.8.0 is 100% better.
eugenekim618 said:
I am on Rogers and had the same problem. Was on 2.2 through QDL tool. I got an email from Rogers that their official 2.2 update was now available.
Downloaded the update, it wouldn't install.
Probably because baseband is different?
Anyway, did the same thing, tried downgrade back to O2's 1.6, then hopefully AT&T's 1.6, but got stuck after getting down to 2.1. Black screen during update.pkg, Dell logo only when just doing a normal boot.
Tried loading 1.6, 2.1 Rom's again to no avail.
Managed to get the phone working again using the QDL tool to get back to 2.2.
Tried doing the Rogers update again, but not working.
Help!
Click to expand...
Click to collapse
I finally bought root Explorer from the market. If there is a free alternative that can change your /system file to r/w (read/write) I could not find one.
You [email protected]!!!!!!!!! (no other alternative, dont think you are smarter than anybodye else, is non-negotiable) to move the 3 files over into your /system file, because the update will not go through. It says there is a "device mismatch" (or something like that). I tried to short circuit all the processes at every step and was unable to beat the system.
Heres what ya gotta do:
1. Follow the part about downgrading to 1.6, then check for software update.
If you have upgraded to ANY other version of 2.2 ya gotta move the 3 files over.
http://forum.xda-developers.com/show...92&postcount=4
Finally I gotta say that it is not worth all the fuss really. You lose tethering and installing outside apps. You gain nothing.
This release is best for djSteve, because he can take all the good parts of this build and put into his next release of streakdroid.
derechbennoach said:
There are three files that need to be in place. and a boot.img file that is installed from fastboot.
http://forum.xda-developers.com/showthread.php?t=805112
Look at what he says to do the the 1.6 non at&t rom and do that to any 2.2 and it worked.
But really 318 is that same thing. and Streakdroid 1.8.0 is 100% better.
Click to expand...
Click to collapse
I have done all that, many many times before and it has always worked but this time it isn't working. I have done the root explorer thing. My phone will not boot passed the logo after all the steps have been completed. I cannot figure out whats causing the problem. I have downgraded to US AT&T 1.6 several times in the past with the method you and everyone else state but this time I am getting nowhere.
rnj79 said:
I have done all that, many many times before and it has always worked but this time it isn't working. I have done the root explorer thing. My phone will not boot passed the logo after all the steps have been completed. I cannot figure out whats causing the problem. I have downgraded to US AT&T 1.6 several times in the past with the method you and everyone else state but this time I am getting nowhere.
Click to expand...
Click to collapse
I hosed mine to a black screen that would not turn on.
The repair tool would not get it going.
I found streakflash I tried to get a link, I'll keep looking.
I launched steakflash.
I pulled the battery put battery and back on. As I plugged in the cable I held the UP volume button. Streakflash recognised it and I ran it through.
That got me back up. I forget what ROM it was. I then ran repair tool.
That puts 2.2 pre release.
If I can do it anyone can.
rnj79 said:
I have done all that, many many times before and it has always worked but this time it isn't working. I have done the root explorer thing. My phone will not boot passed the logo after all the steps have been completed. I cannot figure out whats causing the problem. I have downgraded to US AT&T 1.6 several times in the past with the method you and everyone else state but this time I am getting nowhere.
Click to expand...
Click to collapse
http://streakdroid.com/downloads/djsteve/
Use this I bricked mine and it fixed it.
Put it in diagnostic mode.
Battery out battery and back on.Start software.
Plug in cable holding up volume.
It saved mine.
derechbennoach said:
http://streakdroid.com/downloads/djsteve/
Use this I bricked mine and it fixed it.
Put it in diagnostic mode.
Battery out battery and back on.Start software.
Plug in cable holding up volume.
It saved mine.
Click to expand...
Click to collapse
Thats what I'm trying to say... the only way I can get out of the logo is by doing this. I am on the pre-release of 2.2 as of now but I want to downgrade to AT&T 1.6 and back to the new AT&T 2.2 rom but it wont cooperate with me. Whenever I try, I get the silly logo and have to use QDL to get me unstuck.
rnj79 said:
Thats what I'm trying to say... the only way I can get out of the logo is by doing this. I am on the pre-release of 2.2 as of now but I want to downgrade to AT&T 1.6 and back to the new AT&T 2.2 rom but it wont cooperate with me. Whenever I try, I get the silly logo and have to use QDL to get me unstuck.
Click to expand...
Click to collapse
Ok. Forget going to 1.6. Download the Rom and the files and. OTA won't work.
Follow the instructions and put the three files and the boot.ing on your 2.2 Rom.
Put the new update.pkg on the sd
Reboot recovery select to instal and it will install it.
I have done this twice.
Sent from my Dell Streak using XDA App
derechbennoach said:
Ok. Forget going to 1.6. Download the Rom and the files and. OTA won't work.
Follow the instructions and put the three files and the boot.ing on your 2.2 Rom.
Put the new update.pkg on the sd
Reboot recovery select to instal and it will install it.
I have done this twice.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
It will not work!! I keep getting the status 7 error which then sends it to reboot but never gets pass the logo! The only way to get out of the logo is to pull the battery and use QDL to put me back at 318.
Whats the malfunction with this? I have always managed to update in the past. Why won't this one go through?
First off I did quick scan of this post so if I am repeating I apologize in advance. You MUST go back to AT&T 1.6 with no Streakmod or Clockwork need Dell recovery program. 340 does a scan as it loads and if finds you modified the Steak in anyway stops the install. I had to purchase Root Explorer to complete my conversion, only thing I can say is Root Explorer is worth the money, as for 340, if you are running Steve's ROM with no problems stay with it. Here is the link to the instructions I used, http://forum.xda-developers.com/showpost.php?p=8558692&postcount=4, good luck.
Same Problem
BigBopper said:
Hi -
Could you be more specific on "OEM recovery"?
I have downgraded from 318 all the way back to US OEM 1.6 with BB of 31 which matches OEM version. Build number 6601. btw: I had to do a Nandroid flash to get it to 1.6.
It downloads the 340 update fine but gets hung up on the install process - stuck on logo.
Seems like I need to flash the right recovery but I always get a blank screen when I boot into recovery and choose update from SD card.
Can you link me to the right recovery file?
Thanks.
Click to expand...
Click to collapse
I have the same problem with BigBopper too. Anyone have any idea to fix it?
vanemburghj said:
First off I did quick scan of this post so if I am repeating I apologize in advance. You MUST go back to AT&T 1.6 with no Streakmod or Clockwork need Dell recovery program. 340 does a scan as it loads and if finds you modified the Steak in anyway stops the install. I had to purchase Root Explorer to complete my conversion, only thing I can say is Root Explorer is worth the money, as for 340, if you are running Steve's ROM with no problems stay with it. Here is the link to the instructions I used, http://forum.xda-developers.com/showpost.php?p=8558692&postcount=4, good luck.
Click to expand...
Click to collapse
If you install the three files and flash the boot.img file to a 2.2 rom and have the new 340 apk as update.apk on the sd it will install. I have done it twice. Once from 1.7.0.and once from the pre release 2.2.
BUT it is not worth the trouble. 318 is a better stock rom.
Sent from my Dell Streak using XDA App
derechbennoach said:
If you install the three files and flash the boot.img file to a 2.2 rom and have the new 340 apk as update.apk on the sd it will install. I have done it twice. Once from 1.7.0.and once from the pre release 2.2.
BUT it is not worth the trouble. 318 is a better stock rom.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
I could not be more serious right now when I tell you mine would not work that way... I had to go from 318 2.2> O2 2.1> O2 1.6 and am FINALLY booting into AT&T 1.6 as I type. A lot of people have Streaks that aren't able to do as yours did, mine is one of them. I don't know if its because my Streak is an older one, I bought it in August, or what the deal is but I was not joking!
All is well though. I have finally gotten it back to Stock AT&T 1.6 with my original baseband of 31. Now I shall see if I can go to the new AT&T Froyo...
rnj79 said:
I could not be more serious right now when I tell you mine would not work that way... I had to go from 318 2.2> O2 2.1> O2 1.6 and am FINALLY booting into AT&T 1.6 as I type. A lot of people have Streaks that aren't able to do as yours did, mine is one of them. I don't know if its because my Streak is an older one, I bought it in August, or what the deal is but I was not joking!
All is well though. I have finally gotten it back to Stock AT&T 1.6 with my original baseband of 31. Now I shall see if I can go to the new AT&T Froyo...
Click to expand...
Click to collapse
Good to hear. Mine is white one. I bricked it twice and have brought it back. I know I am not smarter maybe just lucky.
Good luck.
Sent from XDA app using Streakdroid 1.8.0
Hey everyone - I just got a new Rogers Dell Streak. Like a good noob, I followed a guide on how to upgrade the rogers build 7921 and I'm now at Android 2.2, Build 10688. Everything seems to work OK so far, but the home, menu and back buttons flash every 1 minute exactly. Doesn't seem to matter what I'm doing, it's almost as if it's a notification of some kind. They do not flash while the screen is off (sleep).
I followed a few different guides and I think this may be the issue but I thought I'd ask first. the first thing I did was use QDL Repair Tool to upgrade to a dell release of 2.2 (I guess)... the last thing I did was follow the StreakDroid Rom installation instructions using StreakMod Recovery, amss.mbn, and then tried to install Streakdroid 1.6.1, but it wouldn't boot properly, so restored 2.2 using nandroid.
I've done some searches but couldn't really find an answer to the issue I'm having.
If anyone could give me the step required to correctly upgrade the Rogers version of Dell Streak I'd really appreciate it. Ideally I'd like to get to a stable version of 2.2 (DJ_Steve's preferably, but I would be OK to go to the new release from Dell if it would work right).
thanks everyone!
-Steve
Never mind everyone. I figured it out. I reverted back to a stock Rom and recovery and started all over. I'm now using cw recovery and Dj_steves 1.8.1 Rom.
Everything seems to be working great!
Cheers!
STEVE
Sent from my Dell Streak using XDA App
Hi guys, so my Streak's camera stopped working and I have StreakDroid 1.9.1 installed and StreakMod. I called customer service and they said I could exchange it. Does anyone know how to get the stock recovery back on the Streak? I was going to restore a Nandroid backup for Stock Froyo 2.2 for 347 and remove StreakMod.
I read the "What you need to know about the Dell Streak" guide that was made, but the link to the Stock Recovery isn't working.
I also looked at the MultiRecoveryFlasher, but I don't see a version for 347, only 345 and 351.
Can anyone help me? Thanks.
347 was never available in PKG form since it came preinstalled on some Streaks (like mine). There is no recovery image nor a PKG file for 347, so place 351 on your Streak and call it a day. Dell isn't going to care that you upgraded the ROM from 347 to 351. When it comes to exchanging the Streak all they are going to care about is that there is an official Dell ROM on the device.
Ah I see. Thanks for the reply. Also, I've never used MultiRecoveryFlasher, do I need to flash the baseband first, and then the recovery?
Nope. Just flash the recovery. Installing 351 will take care of the rest.
In order to keep streakmod on a stock rom you had to rename or delete install-recovery.sh. If you restore it the stock recovery should reinstall on the next reboot.
Hi i have Dell streak 5 with installed 2.2.2 update official. but i want to install 2.4.4 ginger streak. what should I do. First I have to root my phone or ? what should i do.
Tried Superoneclick unable to root. help me out
red HERE first before going to do anything w/ your 5treak...
and HERE you go to ROOT -when you already know the rules to your 5treak.
@satishm_us: Do search next time before you post, as it is a site rule. A similar question was already asked here. The only difference is that the user in the linked thread had already rooted to install a custom ROM, whereas you haven't. Thus the response of ivantastic is very useful.
I hope I am correct, but, you dont need to root the phone if you plan to load a custom rom. They are pre-rooted. To load a custom rom, you need to enter into the fast boot mode (by long pressing the camera and power button simultaneously and flash a custom recovery image. Then reboot and enter the custom recovery mode by long pressing both volume buttons and power simultaneously. There is a pretty comprehensive guide for flashing custom rom of the wiki page for dell streak on xda.
It terms of custom rom, I know you didnt ask,.but,.i feel dsc rom 0.62b is much more stable and almost as power efficient as the ginger streak. You might wanna consider flashing the gkernel1.5 final. I preffered being on the 405 baseband, though dsc recommends 406.
Sent from my Dell Streak using XDA App
For the most part you're correct. Most custom ROMs are pre-rooted, meaning all the OP would have to do is flash StreakMod then flash the ROM of his choice. However, I have seen custom ROMs for other devices that weren't pre-rooted so you never can tell what a ROM chef may or may not do.