so i have question on what radio i can use since i dont want to be bricked so first I have never been on the mr1 update, i was on 1.12.605.6 CDMA/LTE radio combo.
CDMA Radio version: 1.16.00.0223r
LTE radio version that came with 1.12.605.6
can i just reflash that radio or am i going to need to do flash the mr1 update
I'm fairly certain that the only radio affected is the alpha gingerbread leak
I was on the lastest BAMF 2 with the Alpha radio, and my screen started being unresponsive. I switched back to CM7, and I'm glad I did after all the talk about bricking and such!
Related
Hey Guys,
After seeing what is going on with the GB radio/BAMF bricking situation, I just had a quick question about the radio I am using.
I am running CM7 (the newest based on 2.3.4), but not with the stock radio. I flashed the first one from the Obligatory Radio Thread (1.13.605.7 CDMA/LTE radio combo.
CDMA Radio version: 1.16.00.0402w_1
LTE radio version that came with 1.13.605.7)
Is this ok to be using? If not, is there a better one I could be/should be using?
On a side note, how can I get back to the stock radio that comes with cm7
nthnkrk said:
Hey Guys,
After seeing what is going on with the GB radio/BAMF bricking situation, I just had a quick question about the radio I am using.
I am running CM7 (the newest based on 2.3.4), but not with the stock radio. I flashed the first one from the Obligatory Radio Thread (1.13.605.7 CDMA/LTE radio combo.
CDMA Radio version: 1.16.00.0402w_1
LTE radio version that came with 1.13.605.7)
Is this ok to be using? If not, is there a better one I could be/should be using?
On a side note, how can I get back to the stock radio that comes with cm7
Click to expand...
Click to collapse
The radio you have is fine, there is nothing to worry about.
No radio comes "stock" with CM7.
thanks dude
Hey, I'm currently rocking das BAMF pr4 with the MR2.5 radio and loving it. Anyways, if I switch to another GB ROM do I need to re-flash the Radio as well? Thanks for the help!
You should only need to switch radios if going back to an mr1 based froyo build. I believe all of the listed GB builds are based on the same leaked GB base, making them all compatible with the same radio (and you won't need to reflash that same radio over itself when bouncing around)
Nice..Thanks for the help!
Just want to know...
After you updated your device to OTA 4.5.91 (2.3.4) AT&T , is your radio updated too ?
Thanks.
UP ..........
radio
You get the .91 radio also. So yes, new radio. (even if nothing changes, I heard they give it a new number.)
I am running unlocked 4.5.91, flashed via the SBF, and my Baseband version is N_01.77.30P.
Does that sound right, or do I need to flash something newer (for kernel support, etc; my phone is functioning fine with good cell speeds (5.4mbps down, 1mbps up) and gps lock, and although wifi is slow to start it works)?
Thanks!
Yeah, thats the radio you need to be on, its the at&t GingerBread radio.
OP, you can get just the radio .img here if you want to flash it before doing the OTA udpate (assuming you haven't already done this):
http://forum.xda-developers.com/showthread.php?t=1159505
"Very positive comments about this radio from everyone who's flashed. Looks like this is the best yet."
- Ken Pennington
Thanks but already update with Fruit Cakes
http://forum.xda-developers.com/showthread.php?t=1163009
Is anyone having issues with after rooting the Thunderbolt you lose the 4G LTE at the top and stuck with a 1X?
For some reason this is the second Thunderbolt and I'm having the same issues. If anyone can provide some feedback on this is greatly appreciated.
Thanks!
Check baseband. When I rooted mine from some reason it wiped my radio. Also make sure the back cover is on tight.
Did you just gain root, or did you also flash a rom? If you flashed a new rom you might need to find the right radio to work with that specific one. I'm new to this as well but what I've gathered from reading, Gingerbread based roms require gingerbread radios to be flashed as well. I think you need MR2 or newer to run with GB based Roms.
Yeah- if you root your Tbolt and are running froyo (which of course you would be unless you got the ota before it was pulled) and then you flash a GingerBread rom - you also have to flash a new radio. Flashing a rom does not change your radio. You have to flash the radio separate. And a GingerBread rom needs a compatible radio.
The latest radio is from the 2.11.605.3 ota. There is a radio thread in the development section. Sometimes they post the LTE radio and the cdma radio separate so you have to flash them both. You flash them in hboot. Not in cwr.
sorry if you knew all that already.
All the links to this radio. Radio 12.65.60.29U_26.14.04.28 don't work, this is mostly because multiupload doesnt work any more however does anyone know where I can get hold of this radio or any other good radio for a Desire HD running ICS.
Also, I flashed the radio 12.65.60.29_26.14.04.28_M Should this change my baseband to be the same number as this because it didn't. My Baseband is 12.28b.60.140eP.... which as far as I understand is the stock radio?