as title said above
after rooted and installed custom rom , my phone cannot detect phone line.
when i tried to open wi-fi , my phone automatically reboot by itself .
can i know what the cause of these problems?
thank you
What baseband are you on? Try flashing another baseband and use cobratos patchs to have signal whit ur custom rom u flashed .
Sent from my X10i using XDA Premium App
You probably don't have a baseband compatible with the Rom your using.
how to check baseband ?
sorry im kinda new to this thingy .
please guide me thank you
Sure to check for it you go settings > about phone and look for baseband version
Sent from my X10i using XDA Premium App
asip134 said:
how to check baseband ?
sorry im kinda new to this thingy .
please guide me thank you
Click to expand...
Click to collapse
Lol you flashed a custom rom before you even knew how to check fw and bb version?
Like the others said, you probably need to apply a bb patch. Most custom roms state which bb they are for, did you read the information supplied by the roms cook?
Sent via subspace beacon.
but wait .
now my problem is my phone is currently stuck at opening screen ( Sony Ericsson )
how to solve it ?
*try to not make new thread
Goto the Dev tools app in your app drawer.
Click on bad behaviour then choose crash system server..
If that doesnt work goto
settings
about phone
and check the baseband version.
Make sure it is compatable with the rom you are on.
The opening page (OP) of the rom you downloaded will have the compatable basebands for that rom, or links where you can find them.
this happen if u change room and you`re not in currect bb or you didnt Crash system server when you instal a new room
gregbradley said:
Goto the Dev tools app in your app drawer.
Click on bad behaviour then choose crash system server..
If that doesnt work goto
settings
about phone
and check the baseband version.
Make sure it is compatable with the rom you are on.
The opening page (OP) of the rom you downloaded will have the compatable basebands for that rom, or links where you can find them.
Click to expand...
Click to collapse
thx . this really working on it .
-----
okay another prob.
i tried flashing my friend's phone
*example : i flashed baseband to his phone . i followed the guide given . but
the last message given by flasher is ''Installed version of busybox:Busybox v1.15.3(Date-Time-CET)multi call binary"
so is it already flashed or it stucked?
asip134 said:
how to check baseband ?
sorry im kinda new to this thingy .
please guide me thank you
Click to expand...
Click to collapse
Asip, for any of us to be helpful, we do need to know as much as possible on your situation:
- What ROM did you flash
- What baseband are you on
- Did you lose signal right after you rooted (would be strange) or only when you installed the new ROM (more likely)?
FYI, the "Baseband" is the piece of software which handles radio and similar functions on your phone. Not all ROMs are compatible with all versions of basebands.
To find out which version of baseband, ROM, etc.. you are using, you need to go into the Settings Menu and select the "about phone" option. Where this is will depend on which ROM you are using.
For the X10, rendeiro2005 has collected all currently known basebands. It can be found at:
http://forum.xda-developers.com/showthread.php?t=960527&highlight=baseband+collection
In all probability, if loss of signal is all you are having, then you will have to flash a baseband compatible with your ROM/version. You may have to reflash the ROM too.
Hope this helps
^Sorry about that
okay . for now i trying to flash baseband (mine is 2.1.54)
but the problem is the flash wont finished [ it stuck at the last message which is ('Installed version of busybox:Busybox v1.15.3(Date-Time-CET)multi call binary" ) ]
is it already flashed or what?since im doing this only to try flashing . if this is perfectly done then im proceed to another things .
about lost signal , it already solved as i misread the baseband compatibilty with the custom rom .
thanks
asip134 said:
^Sorry about that
okay . for now i trying to flash baseband (mine is 2.1.54)
but the problem is the flash wont finished [ it stuck at the last message which is ('Installed version of busybox:Busybox v1.15.3(Date-Time-CET)multi call binary" ) ]
is it already flashed or what?since im doing this only to try flashing . if this is perfectly done then im proceed to another things .
about lost signal , it already solved as i misread the baseband compatibilty with the custom rom .
thanks
Click to expand...
Click to collapse
What version of the flash tool are you using? Have you tried to reflash?
It would appear that the flash tool is unable to acquire root, but it should then give you a warning/error if this is the case.
acmbc said:
What version of the flash tool are you using? Have you tried to reflash?
It would appear that the flash tool is unable to acquire root, but it should then give you a warning/error if this is the case.
Click to expand...
Click to collapse
flashtool 0.2.9.1
so how ?
do i need to download another flash tool or what?
is there another way to flash roms ?
because i need to flash multi touch right now >_<"
thanks to anyone who reply here~
gregbradley said:
Goto the Dev tools app in your app drawer.
Click on bad behaviour then choose crash system server..
If that doesnt work goto
settings
about phone
and check the baseband version.
Make sure it is compatable with the rom you are on.
The opening page (OP) of the rom you downloaded will have the compatable basebands for that rom, or links where you can find them.[/QUOTE
where is the app drawer ?
Click to expand...
Click to collapse
Related
I'm currently running FreeX10 B3H1, I see that B4 is out and all it apears to do is add support for the new Baseband... is there any notice improvements with the updated baseband?
I'm also not entirely sure what the baseband does
The baseband is the radio of the phone, so basically it controls your call quality, signal, mobile network, etc..
As fire why to upgrade, I can honestly say I haven't noticed any real benefits since I updated. However, as time progresses newer roms are going to be based on this version so if you want to keep flashing custom roms eventually you will have to upgrade anyway..
Hi,
I attempted to install Beta 4 last night (first time installing FreeX10). But now it is in a non stop reboot cycle and will not get any signal. It stays on for about a minute and then reboots everytime. Having read more on this I think it could be Baseband related. When I check the settings it says Baseband is unknown.
Can I upgrade my Firmware to X10a_2_1_A_0_435_GLOBAL in order to get the correct Baseband and then reinstall FreeX10? And if so, Can I use Flashtool to install X10a_2_1_A_0_435_GLOBAL without issues?
(My phone is an X10i by the way, should I use a different Firmware before re-installing FreeX10B4?)
Thanks in advance!
Dave
Daavid_1 said:
Hi,
I attempted to install Beta 4 last night (first time installing FreeX10). But now it is in a non stop reboot cycle and will not get any signal. It stays on for about a minute and then reboots everytime. Having read more on this I think it could be Baseband related. When I check the settings it says Baseband is unknown.
Can I upgrade my Firmware to X10a_2_1_A_0_435_GLOBAL in order to get the correct Baseband and then reinstall FreeX10? And if so, Can I use Flashtool to install X10a_2_1_A_0_435_GLOBAL without issues?
(My phone is an X10i by the way, should I use a different Firmware before re-installing FreeX10B4?)
Thanks in advance!
Dave
Click to expand...
Click to collapse
hey, for d "unknown baseband" problem u have to wait for d auto reboot after d 1st boot..only then d baseband and network will appear..
and for d boot loop problem-u will need to update to d .435 firmware (.52 baseband and .29 kernels)..or if u want to keep d old firmware install beta3..(beta 4 is only for .435 firmware)
happy flashing bro.
Daavid_1 said:
Hi,
I attempted to install Beta 4 last night (first time installing FreeX10). But now it is in a non stop reboot cycle and will not get any signal. It stays on for about a minute and then reboots everytime. Having read more on this I think it could be Baseband related. When I check the settings it says Baseband is unknown.
Can I upgrade my Firmware to X10a_2_1_A_0_435_GLOBAL in order to get the correct Baseband and then reinstall FreeX10? And if so, Can I use Flashtool to install X10a_2_1_A_0_435_GLOBAL without issues?
(My phone is an X10i by the way, should I use a different Firmware before re-installing FreeX10B4?)
Thanks in advance!
Dave
Click to expand...
Click to collapse
Just use this
http://forum.xda-developers.com/showthread.php?t=936733
Reflash to the new baseband , root it and install Xrecovery and proceet to install your favorite rom. I would suggest making your own with this
http://forum.xda-developers.com/showthread.php?t=938393
PS: This works with new baseband and Beta 4 rom of Z
Cheers.
Have fun flashing and creating your custom roms
srikanth.naidu said:
Just use this
http://forum.xda-developers.com/showthread.php?t=936733
Reflash to the new baseband , root it and install Xrecovery and proceet to install your favorite rom. I would suggest making your own with this
http://forum.xda-developers.com/showthread.php?t=938393
PS: This works with new baseband and Beta 4 rom of Z
Cheers.
Have fun flashing and creating your custom roms
Click to expand...
Click to collapse
I've installed this : http://forum.xda-developers.com/showthread.php?t=936462
Got .435 and baseband 2.1.54
Installed Free X10 without any problem.
You gotta make sure you update to 435 before installing freex10 beta 4 to get all benefits...
ratmkicksass said:
You gotta make sure you update to 435 before installing freex10 beta 4 to get all benefits...
Click to expand...
Click to collapse
no you don't...
flashing just the kernel and the baseband through flashtool has the EXACT same effect...
cant use mobile data after flashing the new ROM
CM 7.1 RC 1
kernel - 2.6.32.9
LG P500
plzzz help
godslay3r said:
cant use mobile data after flashing the new ROM
Click to expand...
Click to collapse
Good that we know such an important information. Try again with a proper baseband ⇩⇩⇩
Try to add APN.
(Settings -> Wireless & networks -> Mobile networks -> Access Point Names)
You can find settings of the provider in google...
... or here..
1
godslay3r said:
cant use mobile data after flashing the new ROM
Click to expand...
Click to collapse
Fill in the blanks :
Original rom :
Rom you have flashed:
Whether u applied some.sort of a baseband fix:
Sent from my LG-P500 using XDA Premium App
apn settings not getting saved
original rom gingerbread 2.3.3
rom flashed : mikos cyanogenmod 7.1 rc 1
and 1 baseband fix
tell me a more stable rom and kernel for using 2G data
Flash the goddamned old baseband as said in my howto. Then go and reflash the ROM. It is clearly said that the patch does NOT work for data on the mik's thread, why are you flashing something with a known bug and complaining thereafter?!?
thanx bro
cant i flash it from recovery....these steps r too long
dr.notor said:
Flash the goddamned old baseband as said in my howto. Then go and reflash the ROM. It is clearly said that the patch does NOT work for data on the mik's thread, why are you flashing something with a known bug and complaining thereafter?!?
Click to expand...
Click to collapse
Woah! Bro relax... He jus a noobie... He doesnt know... Btw, u gt two accounts in xda?
Sent from my LG-P500 using XDA Premium App
godslay3r said:
cant i flash it from recovery....
Click to expand...
Click to collapse
No you can't.
dax4182 said:
Woah! Bro relax... He jus a noobie... He doesnt know... Btw, u gt two accounts in xda?
Click to expand...
Click to collapse
Yeah, so he should read the instructions. When you read that data is not working, flash it and complain that data is not working, it is just... duh!
P.S. No, the first one is cancelled.
godslay3r said:
cant i flash it from recovery....these steps r too long
Click to expand...
Click to collapse
Sure thing. I wrote a couple of pages worth of a howto since I hate flashing a simple ZIP from recovery and was bored. Ignore it, too long. FAIL.
still nt working..........now even the gsm network is gone
godslay3r said:
still nt working..........now even the gsm network is gone
Click to expand...
Click to collapse
Because you need to reflash the darned ROM which you have screwed with the non-working patch. Read!
i even reflashed the ROM dude........bt same prob
plz gimme a link of ur kernel version
RoM n baseband
Well, flash a full stock ROM via KDZ and move on. When you have done some reading (which clearly hurts your brain), come back with some non-PEBKAC issues. While you have mismatch between your baseband and ROM, you have no GSM and data. It is written in the howto, but then again, too long and boring to read, huh?
Bye.
Hello ppl. I have flashed to new baseband w/ Cyanogenmod 9(lurpohip) and franco's newest kernel. I can call and send text messages, but data doesn't seem to work. Would appreciate help. I've gone through both how-to's pt. baseband LGMDP.exe. Also did a full data wipe before installing the rom.
I noticed some NVRESTORE NV_FAIL_S errors when I changed to new baseband in LGMDP.exe though.. Any ideas? Tried to change 3 times, same errors occur.
Thanks in advance. Sorry for being a noob, but I have been searching for 2 days.
Unfortunately, CM team has removed some frequency from sources and now, with some carrier (eg. Vodafone or 3 IT), data connection doesn't work. I have the same problem. The solutions are:
1. Not use a CM rom
2. Use old baseband with patch for CM.
3. Wait for a fix
Sent from my LG-P500 using XDA App
Cause for some apn problems
http://forum.xda-developers.com/showthread.php?t=1479175
Sent from my LG-P500 using XDA App
hi, sorry for the noobish questions. :L
i have a couple of questions, i have heard about checkrom but i havent been able to really find out what it is, could someone please tell me ?
my other question is would i be able to flash miui on my phone?
my phone's details are:
model number: GT-I9100P
Android version: 2.3.4
baseband version: I9100PBVKI2
kernel version: 2.6.35.7-I9100PBVKI3-CL608158 [email protected] #2
build number: GINGERBREAD.BVKI3
it's the nfc model locked on orange uk.
thanks
You need a P rom to flash as far as we know so far .If you flash a wrong firmware you can brick your phone .
Checkrom is a custom rom if you go to the Checkrom post in the developers thread it wil giver you a descriptions . Same goes for all custom roms page one this rom is and has the following or not .
jje
JJEgan said:
You need a P rom to flash as far as we know so far .If you flash a wrong firmware you can brick your phone .
jje
Click to expand...
Click to collapse
does this mean i cant flash miui ?
You can only flash a P rom unless you find evidence to the contrary . Most roms are for i9100 version .
Or be a guinea pig and try .
jje
JJEgan said:
You can only flash a P rom unless you find evidence to the contrary . Most roms are for i9100 version .
Or be a guinea pig and try .
jje
Click to expand...
Click to collapse
thanks for the info, i think i'll leave it for now i dont want to brick my phone :L
You can flash 9100 ROM on your 9100P
But 9100 ROMs don't support NFC module (it will be supported natively with ICS).
I have the same device (orange FR) and you can look my signature for working Radio + ROM...
blubbhome said:
You can flash 9100 ROM on your 9100P
But 9100 ROMs don't support NFC module (it will be supported natively with ICS).
I have the same device (orange FR) and you can look my signature for working Radio + ROM...
Click to expand...
Click to collapse
would it be possible for you to explain how you flashed the rom+kernel ?
thanks
snowboarder54321 said:
would it be possible for you to explain how you flashed the rom+kernel ?
thanks
Click to expand...
Click to collapse
I dont remember
But if your device is already rooted you can install Rom manager or CWM from the market and make a backup of your config. Then reboot in CWM and install what you want (read the how to install section of the wanted rom).
Don't care about your "P" version!
What you read here for standard device (i9100) is working for your P version.
blubbhome said:
I dont remember
But if your device is already rooted you can install Rom manager or CWM from the market and make a backup of your config. Then reboot in CWM and install what you want (read the how to install section of the wanted rom).
Don't care about your "P" version!
What you read here for standard device (i9100) is working for your P version.
Click to expand...
Click to collapse
okay, i'll give that a go later
Don't use Rom Manager, use Clockwork. Rom Manager seems to not work well with the SGS2, this forum is littered with posts from people who used Rom Manager to flash and it broke CW Recovery, put the phone into a bootloop or soft brick, etc, etc.
Best to play it safe IMHO.
MistahBungle said:
Don't use Rom Manager, use Clockwork. Rom Manager seems to not work well with the SGS2, this forum is littered with posts from people who used Rom Manager to flash and it broke CW Recovery, put the phone into a bootloop or soft brick, etc, etc.
Best to play it safe IMHO.
Click to expand...
Click to collapse
Oh I didn't know that rom manager was not working fine on our device. I am using clockwork manager and it is working fine.
I've seen a heap of posts in the couple of months I've been visiting this forum from people who ended up with broken CW Recovery & bootloops after using the Manager app.
I used it once to try and flash a kernel & it broke recovery completely.
Obviously any/everyone's mileage may vary, but for me, I'd rather play safe & boot into Recovery whenever I flash or backup.
blubbhome said:
Oh I didn't know that rom manager was not working fine on our device. I am using clockwork manager and it is working fine.
Click to expand...
Click to collapse
so if i shouldn't use rom manager, what should i use ?
Didn't say you shouldn't use it Just said that plenty of people have had problems using the app, and rather than risk it, since I had that problem with it, every time I've done a backup or flashed a rom/kernel I've rebooted into recovery & used CW Recovery itself to do the business
As I said in my previous post, your mileage may vary & you may not have any problems with it at all.
snowboarder54321 said:
so if i shouldn't use rom manager, what should i use ?
Click to expand...
Click to collapse
snowboarder54321 said:
so if i shouldn't use rom manager, what should i use ?
Click to expand...
Click to collapse
Read this thread :
http://forum.xda-developers.com/showthread.php?t=1103399
so is rom manager the only way to install cwm without flashing a different kernel ?
MistahBungle said:
I've rebooted into recovery & used CW Recovery itself to do the business
As I said in my previous post, your mileage may vary & you may not have any problems with it at all.
Click to expand...
Click to collapse
i just dont understand how you get cw recovery :S :L
Hello guys! I have a GT-I9100P also with the latest BVKL2 2.3.6 firmware. I had it rooted when I was at BVKI3 2.3.4 firmware and now I am looking for a good CF-ROOT kernel for my phone. What would you recommend me? (what if I tell Chainfire to make a CF-ROOT more appropriate to my kernel)?
volod96 said:
Hello guys! I have a GT-I9100P also with the latest BVKL2 2.3.6 firmware. I had it rooted when I was at BVKI3 2.3.4 firmware and now I am looking for a good CF-ROOT kernel for my phone. What would you recommend me? (what if I tell Chainfire to make a CF-ROOT more appropriate to my kernel)?
Click to expand...
Click to collapse
Why don't you post in Chainfire's thread to ask him about making an insecure KL2 kernel?
But I think you can use the insecure KL1 kernel from Chainfire's thread to use for root. Or you could flash SpeedMod or Siyah, and the rooting will happen for you. You have lots of options.
were to put the rom zip file
I got the exact same phone as the OP im trying to flash a rom in a zip format but clockwork mod recovery cant find the file ive looked in install from sd card and install update.zip. ive also tried installing it through rom manager, no joy there, inside rom manager i chose to boot into recovery to flash it manually and now i got a black screen with a white triangle n a lil green android dude so i see what people are saying about the s2 and rom manager, anyways my question is were do i place the zipped rom? on the internal or external and should i rename the rom file?
Ive had 2yrs experience with a HTC HD2 so im not exactly a noob to flashing roms, but the galaxy s2 is very new to me.
Hey guys i have been having some signal problems with my ace, but I only have them when inside my house. This started happening when I flashed gingerbread 2.3.5 to get a custom rom for my Ace (which is awesome btw!) the rom I am currently using is WP7 Rom by Jinavs. I have googled & searched a lot and all I found was a code to change the GSM too 900/1800 but I tried the code and it said that it was invalid, the code is *#2263#. Then I read something about changing the phone's modem is this possible on custom firmware? I never had any problems when I was on Stock Froyo 2.2.1. Any help guys?
Also master reset or factory reset does not work :/
what I do sometimes is airplane mode or turn off the phone and it sometimes works
and it only happens inside my house it works fine in any other place.
Any help will be appreciated
Use 2.3.4 Asia version ddkq6 no signal problems.and use cm7.2 fat kang by frozen ace more steadier ...
Hit thanxs if I helped
Sent from my GT-S5830 using xda premium
shailpancholi said:
Use 2.3.4 Asia version ddkq6 no signal problems.and use cm7.2 fat kang by frozen ace more steadier ...
Hit thanxs if I helped
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I'm from Puerto Rico if that changes anything. Also is this risky? would it brick my phone because the Rom I'm using is based on XWKS2
Also how would I flash the modem only?
And I would like to keep this rom because I love WP7 xD
Anyone? :/
Reflash with stock gb rom for your region
Sent from your phone
an0nym0us_ said:
Reflash with stock gb rom for your region
Sent from your phone
Click to expand...
Click to collapse
But if I do that I will lose the custom rom
I wanna find a way to keep custom rom but get rid of signal problems inside my house.
Is it possible?
iAreBeRtii said:
But if I do that I will lose the custom rom
I wanna find a way to keep custom rom but get rid of signal problems inside my house.
Is it possible?
Click to expand...
Click to collapse
create a cwm backup then. the point of reflashing stock rom is to get correct modem for your region. after that u can just restore the cwm backup, it wont overwrite the modem.
an0nym0us_ said:
create a cwm backup then. the point of reflashing stock rom is to get correct modem for your region. after that u can just restore the cwm backup, it wont overwrite the modem.
Click to expand...
Click to collapse
Ok I found stock 2.3.4 for my region does that work?
My phone is in 2.3.5
iAreBeRtii said:
Ok I found stock 2.3.4 for my region does that work?
My phone is in 2.3.5
Click to expand...
Click to collapse
yes. even if its 2.3.3 it doesnt concern u. u only need the modem.
an0nym0us_ said:
yes. even if its 2.3.3 it doesnt concern u. u only need the modem.
Click to expand...
Click to collapse
Ok but the firmware is a 1 package.
Am I going to flash only the modem or the whole rom?
whole rom. even if after flashing it doesnt boot/stuck on boot/bootloop, just restore previous cwm backup and see if the modem version in phone setting changed
an0nym0us_ said:
whole rom. even if after flashing it doesnt boot/stuck on boot/bootloop, just restore previous cwm backup and see if the modem version in phone setting changed
Click to expand...
Click to collapse
Ok so let me get this right.
1. Backup with CWM
2. Flash Rom with ODIN
3. go into CWM and restore backup
4. check modem
am I missing anything?
Sorry if I ask a lot I just don't wanna eff up my phone
yes correct.
an0nym0us_ said:
yes correct.
Click to expand...
Click to collapse
Ok I will do that and get back to you
If it works I'll click thanks on all your posts 'till I run out of thanks for the day
whoops.. need to correct a thing.
after flashing with odin u need to reflash cwm from stock recovery first before u can restore previous cwm backup, because odin overwrite the whole phone to stock including recovery
an0nym0us_ said:
whoops.. need to correct a thing.
after flashing with odin u need to reflash cwm from stock recovery first before u can restore previous cwm backup, because odin overwrite the whole phone to stock including recovery
Click to expand...
Click to collapse
Oh ok then imma search the forum for the CWM
already restoring backup
OMG THANKS DUDE you made a guy in puerto rico really happy right now I will try the FW out and will report back well here I go as I promised thanks to your posts
an0nym0us_ said:
whoops.. need to correct a thing.
after flashing with odin u need to reflash cwm from stock recovery first before u can restore previous cwm backup, because odin overwrite the whole phone to stock including recovery
Click to expand...
Click to collapse
This is off-topic but can you help me with a sound issue i have?
it seems the system sounds (dialer, keyboard, etc) stopped working lately :/
also i downloaded those 3rd party apk's and they didn't do anything.
I remember like last saturday I did something and they started working but I don't remember what D:
Do you know how to fix this?
iAreBeRtii said:
This is off-topic but can you help me with a sound issue i have?
it seems the system sounds (dialer, keyboard, etc) stopped working lately :/
also i downloaded those 3rd party apk's and they didn't do anything.
I remember like last saturday I did something and they started working but I don't remember what D:
Do you know how to fix this?
Click to expand...
Click to collapse
clear data/factory reset from cwm. note that u'll lost all data when doing so, but if its not working either even after factory reset then just restore the cwm backup
its worth a try
So i have some experience with these things (flashing and whatnot) with several phones already (htc hero, legend, desire, desire hd, motorola milestone, iconia a500, etc), so i dont get what could be wrong.
So i have this lg optimus one.
Gave it root with z4root method.
Got rom manager installed, flashed the recovery, and rebooted into the recovery.
I formated the sdcard from recovery, entered usb mode, copied several cfw (mostly gb roms) along with some kernels.
I flased my first rom on this phone, and i think it was optimus v3 (or something like that), rebooted, then i got FC, "process com.android.settings has stopped unexpectedly". So im thinking now ... "hmmm .. the kernel must not be the right one". So i search a little and see that there are 2 kernel types, v35 and v32.
So i start flashing another kernel, reboot, but still get the same thing.
So i then start flashing another cfw, but still the same thing.
I flashed several cfw and about 4 kernels by now.
What im i not doing right !?
Where should i check ?
Maybe ur not on the right baseband If u were on Gingerbread when rooting then ur on new baseband but if u were on Froyo then u were on old baseband so check for a ROM with the proper basebabd and try
Sent from my LG-P500 using XDA
hmm .... i was on froyo ... and im trying to flash gb roms ..
can i change the baseband ?
fxandrei said:
hmm .... i was on froyo ... and im trying to flash gb roms ..
can i change the baseband ?
Click to expand...
Click to collapse
Yes you can its in development forum i cant post the link because im by xda app but we have a thread of how to do it with LGMDP.
fxandrei said:
hmm .... i was on froyo ... and im trying to flash gb roms ..
can i change the baseband ?
Click to expand...
Click to collapse
Yes u can..but I'd recommend u to try a ROM which is for old baseband (or for both old and new) and see if it has any problems.if its working perfectly then its the baseband problem.
Try this rom : http://forum.xda-developers.com/showthread.php?t=1463495
there's a seperate download link for old baseband
Orelse try this to update the baseband:
http://forum.xda-developers.com/showthread.php?t=1149530
There's a quick tutorial on how to update the baseband in the ROM link also I provided...please read the whole post carefully and do it
I haven't tried the above mentioned links.
Sent from my LG-P500 using XDA