Related
Hi everybody,
I had my x10i upgraded to 2.1. The phone is from UK, and I flashed 1.6 nordic, then upgraded to 2.1 through seus. The phone did not turn on the first time, then I took the battery out, put it back in. It turned on, it worked for a while. Though if I turned the phone off, and then on, it took a while to boot, or to even show something on the screen.
Now it completely refuses to boot up. I've tried flashing 2.1 global with flasher available on these forums. Same result. Then flashed it once more with SEUS. SAME THING!
When I press power button the phone vibrates, but then nothing is shown on the scree, none of the LEDs are on, nothing. If the power button is pressed again, nothing happens. If I take the battery out, and then put it back in, same thjing happens: the phone vibrates but nothing on the screen.
Has this happened to anyone here? Is it possible to fix this issue withous service center? and is there a way to revert to 1.6?
Thanks to everyone in advance, any advice is appreciated.
EDIT: I can also turn the phone on in flash mode, green LED comes on and I can flash it successfully.
If anybody is interested or has the same issue, I found a solution.
Download Flash Tool from post 3, download the most appropriate 1.6 firmware for your X10 from post 2. I used latest WWE version.
Replace all files in Flash tool with your downloaded firmware, record DevID (read howto) and flash your phone. Then update with seus to 2.1.
Cheers
So, this means it's case of a bad flash, is that it? I have read some people experience this. Thanks...
m00nman said:
If anybody is interested or has the same issue, I found a solution.
Download Flash Tool from post 3, download the most appropriate 1.6 firmware for your X10 from post 2. I used latest WWE version.
Replace all files in Flash tool with your downloaded firmware, record DevID (read howto) and flash your phone. Then update with seus to 2.1.
Cheers
Click to expand...
Click to collapse
Some of the more recent firmware files do not include the loader.sin file. You need to add manully, or use the flash tool that goes and puts it in. The latest direction mention to add the loader.sin.
The X10flash.bat I use has these lines:
:X10
@copy loaders\X10loader.sin firmware\loader.sin
GOTO USERDATA
First, please, I tried tons of different things. I'm a linux kernel hacker too, although I never hacked android related stuff yet.
When I try to turn the phone on, it just quickly blinks the green line, vibrate and nothing else happens.
It was running firmware version 1.6 fine until I tried to upgrade the phone using a windows xp running in a vmware VM. I tried companion, SEUS and FlashTools. All left the phone running with the yellow exclamation mark after.
I continue trying to flash it until suddenly even the exclamation mark stopped showing up.
After that I moved to a native windows installation and SEUS went all the way through updating the phone, but the phone never turned on again. It just happened what I described above.
I already tried everything I came across with in the forums: flashing versions 2.1 and 1.6 from different places, with different versions of the FlashTool, and SEUS, and the companion .... it always goes all the way through, saying all ok, but when I turn on the phone: same-o. just quickly blinks, vibrate and dies.
Any idea? had I really hard broken my phone?
Please, any direction would do.
Interestingly - I have excatly the same situation with my partners phone. Attempted to downgrade to 1.6 using a couple of methods - editing build.prop and then SEUS and flashing this firmware.
Problem I have now is SEUS says I have the latest firmware and doesn't offer an update - I guess this is because the version of the software that is installed is higher than what is currently avaiable to the CDA I have put in the build.prop
Next I tried putting 2.1 back on from this thread.
The phone will not boot still it does excatly what you have said - blinks, vibrates and then turns off!
Thank you for the reply. It is good to know Im not alone
In my case SEUS always says there is a newer version and flashes the phone. It goes all the way to the end and says the upgrading was successful.
Would it be possible that although the phone "accepts" being flashed, it is not actually writting anything to a persistent state?
Is there a way to verify if what I flashed is really there? Otherwise SEUS should way nothing to upgrade, since it already did it all the way through successful.
easy question:
are you sure you have battery remaining to start it up and flash? if not, try to charge the battery on another phone.
I guess so.
I'm using a multimeter to measure the power of the battery, which varies from 3.6 to 4.1 volts, depending on how long I leave it on the charger.
So although the phone gives no indication of being charged, I guess that measure is enough to say it is being charged, right?
I've even just tried Omnius Server, which flashed perfectly fine, but still the phone won't boot Its completely dead now
Yep. I also tried that. Wasted money..
So far no change.. the thing is still a brick.
.. well, a brick is at least heavy enough to actually deal some damage when thrown..
Hah Just getting it exchanged now - tried everything - given up!
well, just in case you have it on warranty, go ahead
take it to the shop
repair
stop wasting time and money... go to a GSM SERVICE... you need service tool to revive your phone if it's deadboot...
i use setool to flash sony-ericsson phones and it's the best flash tool...
if it's bootfcked, then you need jtag's...
@sanyyous
setool will flash the phone just like SEUS or FlashTool will, right? or it will do some other kind of flashing witchery?
and jtag you mean hardware debug and service, right?
the issue is: I bought the phone in London and I'm in Brazil now. So either I fix or I see a trash bin in this little x10's fate.
setool flashes the same way than my tool,but it has more tricks afterwards for some other things.
For me it sounds like :
1.) False USB-Port or Cable
2.) False nand
Please try to following:
Go into your car with a laptop and flashtool on it -> Start the engine and pull down the AC to the coldest state it can do.
hold your phone DIRECTLY with the battery in Front of the cold airstream.
Flash it now
I have recovered a few dead phones so, the problem is that they get too hot and the nand shows errors while temporary placing the flashimages -> If so the loader rejects the image because of checksum fail.
-> Give it a try, if it don't work you have to send it to service.
Regards
Bin4ry
Man.. I will try as soon as I get home... and if it works.. expect a good donation.
Out of curiosity - did it work?
Sent from my X10i using Tapatalk
I still couldnt try.
In Italy now. I'm going back to Brazil only Feb 3rd.
Meanwhile I'm trying to convince my gf that she couldnt break the phone even further for trying. Hopefully I'll lure her into doing it until this weekend.
Firgers crossed.
Bin4ry said:
setool flashes the same way than my tool,but it has more tricks afterwards for some other things.
For me it sounds like :
1.) False USB-Port or Cable
2.) False nand
Please try to following:
Go into your car with a laptop and flashtool on it -> Start the engine and pull down the AC to the coldest state it can do.
hold your phone DIRECTLY with the battery in Front of the cold airstream.
Flash it now
I have recovered a few dead phones so, the problem is that they get too hot and the nand shows errors while temporary placing the flashimages -> If so the loader rejects the image because of checksum fail.
-> Give it a try, if it don't work you have to send it to service.
Regards
Bin4ry
Click to expand...
Click to collapse
If this works, it's a miracle.
Maybe trying the fridge would have the same result, but all that ice could damage the phone .
Good luck and I really want to know if it works.
Yeah, on the fridge the moisture would probably ruin the phone even further. .. if thats at all possible.
And believe me, no one would wanna see if it works more than me.
<girlfriend-apeal>
you see, everyone wants to know if that works. please, you wont ruin the phone further just by trying it )
</girlfriend-apeal>
My wife's x10 is OK, so it would just be out of curiosity for me .
Good luck.
I got my gf to try but it didnt work
I'll try it myself when I get home next week, but I dont think thats gonna work..
Anyway, I drop by next week to comment on the final status.
Thanks for the replies so far.
fabioroger said:
First, please, I tried tons of different things. I'm a linux kernel hacker too, although I never hacked android related stuff yet.
When I try to turn the phone on, it just quickly blinks the green line, vibrate and nothing else happens.
It was running firmware version 1.6 fine until I tried to upgrade the phone using a windows xp running in a vmware VM. I tried companion, SEUS and FlashTools. All left the phone running with the yellow exclamation mark after.
I continue trying to flash it until suddenly even the exclamation mark stopped showing up.
After that I moved to a native windows installation and SEUS went all the way through updating the phone, but the phone never turned on again. It just happened what I described above.
I already tried everything I came across with in the forums: flashing versions 2.1 and 1.6 from different places, with different versions of the FlashTool, and SEUS, and the companion .... it always goes all the way through, saying all ok, but when I turn on the phone: same-o. just quickly blinks, vibrate and dies.
Any idea? had I really hard broken my phone?
Please, any direction would do.
Click to expand...
Click to collapse
i tried to install the gingerbread theme but after i moved the framework file into system/framework folder my phone rebooted by itself and blocked to SE logo screen.... i wanna flash the phone but i'm unable to switch usb debugging mode on..... any suggestions to turn the usb debugging on or flash the phone witout it....???? tnx in advance 4 any suggestion
Recently just got my GS2 and I love it (coming from iPhone 4 and use to have HTC Magic). But I encountered a problem with my phone the same day I got it which is that the vibration stops working after I updated the phone to the latest firmware provided by Samsung through Kies.
I've tried going into the test mode *#0*# and just select vibration but the screen just turn black and the phone won't vibrate. I am trying to find the official firmware for my phone but I can't seem to find it anywhere. My phone CSC is different from the one on the Official Firmware thread. I can't remember of the top of my head what it is but if it helps, mine seems to be an import set and the CSC starts with J.
I've tried doing a hard reset through the OS but it also didn't help. What I am trying to do now is trying to find some way to reflash the OS but Kies don't allow me to do that and I am not sure where to get the official firmware as I am afraid that if I flash it with other firmware that is of a different CSC, my warranty may not be honoured.
So just wondering if anybody here got any tips and helps to solve this problem or do I have to send it back to the shop?
One try Kies emergency firmware recovery .
Two a factory reset .
Official firmware for your phone is only on Kies Samsung stock Samsungs not phone providers .
Two choices one service centre Samsung
two is the unofficial route of flashing via Odin stock firmware . Samsung will not refuse warrant but seller may .CSC may not be for your area enter APN settings yourself .
http://forum.xda-developers.com/showthread.php?t=1075278
jje
I also noticed a lack of vibration today. Could not get it to work whatever i did, but I did not update it... In fact I didn't do anything except trying out my new Samsung car holder with it.
I suggest you use this thread for further analysis.
I debranded mine last night but couldnt follow the final step. Now I`ve plugged my SGSII into the pc Kies can`t tell me what firmware version I`m
using. Even worse, as I`m a new user I can`t post on that thread to ask for assistance! LOL
I wish i`d left it well alone now, all I wanted to do was debrand it so I could update to KE7. Sigh
RedAl said:
I debranded mine last night but couldnt follow the final step. Now I`ve plugged my SGSII into the pc Kies can`t tell me what firmware version I`m
using. Even worse, as I`m a new user I can`t post on that thread to ask for assistance! LOL
I wish i`d left it well alone now, all I wanted to do was debrand it so I could update to KE7. Sigh
Click to expand...
Click to collapse
Debrand mean remove bloatware and does not give you an update path .
You can try a factory reset and wipe all data see if Kies picks up update .
Or use stock rom KE7 via Odin or the current update KF1 .
KIES will update original firmware when its available but may not pick up stock firmware .
jje
RedAl said:
I debranded mine last night but couldnt follow the final step. Now I`ve plugged my SGSII into the pc Kies can`t tell me what firmware version I`m
using. Even worse, as I`m a new user I can`t post on that thread to ask for assistance! LOL
I wish i`d left it well alone now, all I wanted to do was debrand it so I could update to KE7. Sigh
Click to expand...
Click to collapse
Just flash KE7 without doing any debranding stuff and hard reset after the device starts for the first time.
Cheers jje, I`m assuming if I want to use stock rom that means I need to root the phone? I`ve never dabbled in that side of things before and was rather nervous just about debranding.
I almost wish I could undo what I`ve done and just wait for Three to send out the update. I`m assuming thats not so easy?
Eureka, suddenly i noticed that my phone's vibration ability was back when walking to a shop with my headphones in. It seems like the headphone jack somehow influences things. Maybe a bad connection between these components?
Maybe you should try this out to confirm this?
(copied from this thread)
Hi everyone
yesterday I bought a X10 (it wasn't brand new)
I turned it on and it asked me for settings (language, time, etc) (yeah it's not new but they changed the rom before sell it to me)
I worked with it for like 10-15min and I got a big vibrate and it turned off. I pluged it into the charger, there was an orange led for 5min and then nothing, when I tried to turn the phone on I saw SE logo and it restarted. I plugged it to the charger, nothing again, not even orange led
I took it to a store and they shocked the battery, i came back, turned it on, it booted ok everything was fine,I plugged it again to full charge. orange led for 1.5h and then green led.I worked with it a short time then turned it off to put the sim and sd card in
when I turned it on it booted till lock screen and rebooted. again SE logo then boot again
it sometimes boot till lock screen sometimes only se logo and reboot
when it goes to lock screen I see antena has red x on it, i thought maybe that's the problem, i removed sim and sd, still the same
Please please please help me
ps 1: I can't connect it to the pc, I tried but when pc wants to recognize it and install drivers, it stops and says "not successful"
Have a look in the dev section for flashtool (there's a tutorial in the q&a section), look in the firmwares sticky in the dev section and download the firmware for your region. I suggest you pick a generic firmware. Now use flashtool to flash the firmware to the phone.
This should solve the problem.
thank you Frosty for fast answer
but my problem is my pc dosen't recognize the phone
flashtool works even without drivers?
Flashtool works in flash mode. If you can't get your computer to recognise the phone when it is powered on, it should still recognise it in flash mode. If not, there is an option in flashtool to install the drivers.
Sent from my x10, rocking Wolf's 2.3.3 + DooMKernel, overclocked to 1.2 GHz...
good, so I think I still have a chance to fix it
btw, now I have stock 2.3.3 installed
which rom do you recommend? should I install 2.3.3 again or downgrade to 2.1?
I want it to support farsi
X10i_3.0.1.G.0.75_CUSTOMIZEDARO-ARO GENERIC 1241-1846
is right?
You could do 2.3.3 or 2.1. It shouldn't matter.
As for Farsi support, 2.1 supports more languages than 2.3.3 I think. I just checked the list of available languages on my 2.3.3 ROM and Farsi isn't listed. 2.1 might support it.
You could always try both to see which one better suits your needs.
That firmware you have is 2.3.3, by the way.
thank you so much frosty
I asked if i could install 2.3.3 because now have 2.3.3 and i have this problem. installing same version will fix it?
and one question about baseband
should i download one or it comes in firmware pack/zip
if I have to download it, how do I know which one?
Your're welcome.
Oh, in that case, you should be fine.
The baseband is included in the firmware file.
I'm facing a weird problem
I can't turn my phone on, I've been told to try flashtool and install a new rom
my old rom was 2.3.3
I downloaded flashtool and X10i_3.0.1.G.0.75_CUSTOMIZEDARO-ARO GENERIC 1241-1846
first time I tried instrudoction in second post in this topic. it seems flashtool recognized my device and startet flashing but after a few min it said flash aborted
I wanted to try again but this time even before i connect the device to usb cable, flashtool say flashing start and nothing happen
I also tried SE update service, it downloaded the rom and it seem it worked (second green bar went to the end and said disconnect phone and restart)
I restart the phone but it reset after SE logo, sometime it boot till lock screen and reset again
Please help me
Sorry to say this, but you might be out of luck.
If re-flashing stock couldn't fix it, your issue may be a hardware problem.
Do you have any sort of warranty? If it's second hand, you probably don't.
You could try taking it to a Sony Ericsson service center and see if they can do anything.
omg
I'm officially beeeeeep
thanks anyway Frosty
btw, pc campanion and se update service do something different
is it possible that pc companion can fix it?
Well you could try. Couldn't hurt.
Hi everybody,
First of all, if I am in any way repeating something written somewhere else, I am sorry but I am quite newbie here and, even if I searched around this forum, I couldn't find any info about my specific problem.
This said, to the problem!
I have an Xperia Neo (europe) with 2.3.3 Android and yesterday I was signaled of a OTA update available. I then switched on Wifi, connected the phone to the power cable and started the update. After downloading everything, the phone rebooted and showed me an updating screen.
After a while, though, the phone turned off and....well, it didn't turn on anymore!
No sign of life from the battery led either!
Now, after some stunned panicking seconds, I started googling and came at this thread:
http://www.techofweb.com/technology/recovering-bricked-xperia-flashtool.html
and downloaded the last version of Flashtool from:
http://forum.xda-developers.com/showthread.php?t=920746
and the latest stock firmware ( MT15i_4.0.2.A.0.42_GLOBAL.7z ) from:
http://forum.xda-developers.com/showthread.php?t=1258723
....I tried to flash the firmware with FlashTool and the operation completed, but when I try to turn the phone on now I just see a quick green blinking of the power led and then nothing else.
I tried to take out the battery, and also tried to flash an older (2.3.3) firmware, but the problem didn't go away.
Now, the phone is in warranty, not rooted and everything....I could bring it to Sony, but it would take 15 to 30 days to them, so I just wandered if there was anything I was doing wrong and that, if corrected, could save me a lot of time and efforts.
Thank you guys a lot!
Bye!
you downgraded from 2.3.4 to 2.3.3 ?
If so then you get 0% battery issue... Search about it in this forum
armando101 said:
you downgraded from 2.3.4 to 2.3.3 ?
If so then you get 0% battery issue... Search about it in this forum
Click to expand...
Click to collapse
Downgrading to 2.3.2 causes battery issue...back to 2.3.3 no one reported battery problems.
Sent via my FXP046 MT15i®
This is not specially meant for this case, but maybe this works: http://forum.xda-developers.com/showthread.php?t=1324707
It happened to me today morning. Just use Wotan server to flash new firmware.
hey there
i bought this cell yesterday and am facing the same problem i tried the SE update service but it did not work firstly it used to show the logo of a phone with an exclamation mark but now after trying the SEUS for a couple of times the screeen wont just turun on only the green light keeps flashing when the power button is pressed i searched all the threads but did not find any ftf file to flash the device .
1.i will be using flash tool to flash the device is it allright?
2.can the device be fixed or should i approach the service center?
3 can anybody please provide me with the firmware file link to download the firmware i have xperia neo v mt11i and i am a resident of india
could u bear with me for asking such questions and please reply it would be really helpful...as i am new to android platform
thanks in advance...
Try reading the previous post in this thread?
I'd be surprised if flashing firmware with Wotanserver won't fix it. Just go to wotanserver.com, follow the steps and flash.
Before u flash using flashtool or wotanserver, makesure u hold the back button while connect to usb until the green LED appear.