[Q] If anyone can help me get rid of this........ - XPERIA X10 Q&A, Help & Troubleshooting

Was trying to Install Backtrack 5 on my X10 and followed each and every step VERY CLEARLY. I m no NOOB so I knew what I was doing.
I m on MIUI 2.2 and while starting the backtrack 5 I got an error which said
1) is ur phone root?
and asked
2) whether I got busybox
So I made a foolish thing of installing Busybox again.
(Somewhere I read that custom roms use their own busybox and there is no need to install other version cuz it leads to boot loop), and Yes the boot loop started on my phone with an error that System force close.
Now my X10 is not detecting my sd card, + Xrecovery is not opening no matter how long I press the back key, + The flash tool is not flashing any firmware to my phone saying TURN ON PHONE AND CHECK USB DEBUGGING IS ON., I turned it on, but it still asks me do that.
OVER THIS ALL THE BLOODY UPDATE SERVICE FROM SONY ERICSSON SAYS NO SOFTWARE AVAILABLE FOR UR PHONE.
If any one can help me how to flash a custom rom from COMPUTER
or If anything using terminal emulator
or how to make my phone read my sd card.
ANYTHING, ANY HELP IS VERY APPRECIATED.
THANKS IN ADVANCE
waiting for help as soon as possible

If you using Zeus to reinstall 2.1 when it tells you that you have latest software already you will have the option to reinstall in the bottom right corner
Kieron
Sent from my X10 using XDA App

but it said Your phone has latest software Installed.
and at the right bottom there was only EXIT button.
and top of it was FINISHED written with a Tick mark
ANymore help

Yours is a very unique case. Try this to go back to 1.6. I dont know if it works. http://forum.xda-developers.com/archive/index.php/t-1103343.html

you are selecting the wrong option its not upgrade that you want
you want to repair and not upgrade.
repair will help you in reinstalling.... to 2.1

Related

[Q] x10i 2.1 Nordic issues trying to re-rom

Im having some issues with my x10i that i put Nordic 2.1 on a few weeks ago.
Some apps fail to open every now and then, and the stock android alarm doesnt work (the app seems fine, but when the alarm goes off there is no noise, yes ive tried volume etc, yes ive tried downloading a 3rd party alarm)
So id like to put a fresh 2.1 rom on, ive tried these:
http://forum.xda-developers.com/showthread.php?t=825675
http://forum.xda-developers.com/showthread.php?t=827065
But i cant get them to work, the .bat files of the flasher fail at the connection stage (2nd step after selecting windows vr)
Im having a lot of problems,, main one is that i cant install the driver for the x10 in flash mode, windows cant find the driver.
If anyone could kindly tell me exactly what i have to do, starting from connecting the x10 to a virgin win xp (no drivers installed for the x10), id be happy to donate $20USD into your paypal account
Ok let me see if I can help you a title here....
1. Root your device using this http://forum.xda-developers.com/attachment.php?attachmentid=453551&d=1291188836 its really simple and fast...
2. Once you've root your device use this application http://www.mediafire.com/?ewf9e41ybw2eazz
to install the Xrecovery menu on your phone... It's very simple as well....
3. Download this file http://hotfile.com/dl/87564842/7e80127/SE_update-shipped-full.zip.html
and save it to your SD Card into any folder you want, I recommend you to do it in a new one with any name you want, that will make easier the next step...
4. Reboot your phone and right after the white letters with Sony Ericsson logo appear press the back key a few times , if the Xrecovery menu has been installed correctly you will see a weird image of and Android with troll face lol... and a bunch of options like reboot, install update zip etc....
5. Choose Install Custom Zip and then go to the folder you created with the downloaded zip file... from step 3... Then select it and click in yes... Wait for a few minutes and when the phone tells you done click on reboot and wait for the firmware to load...
6. Enjoy the SE 2.1 firmware with JIT enabled.
7. Read your inbox...
Jimmy
Sent from my AOSP on Xperia (Guatemala)
Siddy1200 said:
If anyone could kindly tell me exactly what i have to do, starting from connecting the x10 to a virgin win xp (no drivers installed for the x10)
Click to expand...
Click to collapse
Put XP in safemode, run seus, put phone in flashmode when prompted so it installs the drivers, try the flashtool again, while in safemode on XP.
Or if you'd rather go for something simpler.. try rooting (if you haven't already) then follow this - http://forum.xda-developers.com/showthread.php?t=828163 to flash to global generic.
i cant even get the phone to tunr on atm, but if i get it to work ill send $20 ur way jimbo, thanks everyone
jimbo, actually your links are broken so i cant follow your guide cause u just say "use this application" - but link is down
ok, i found a new link for that one, but i cant install it cause when i connect my phone to the pc, it just starts charging, it wont mount the sd??
"If anyone could kindly tell me exactly what i have to do, starting from connecting the x10 to a virgin win xp..."
ok i put xrecovery on the sd card through a pc, installed the app and ran the app, clicked Install Xrevovery, error
already have root access, xreovery was granted superuser, but doesnt work
tried the new root app just in case, it just switched off my phone... none of this works
does anyone live in Sydney and can do it for me????
Have you installed BusyBox too?

[Q] x10 flashing help

Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
Its "soft-brick" state.
Didnt you have some problems with usb before?
If not, try to charge up your phone once again.
Then read this topic, It will surely help you:
http://forum.xda-developers.com/showthread.php?t=1034997
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Make the phone root 1st.
Try read here http://forum.xda-developers.com/showthread.php?t=928343
Then u can flash other ROM u like to your device.
Sorry, i am also newbie. but i read a lot thread and follow senior guide ^_^
dello2002 said:
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Click to expand...
Click to collapse
Even if phone shows up error triangle you should be able to use standart flash mode.
About fastboot dont know, never used it.
hi,
Thanks both for your help, in the end i downloaded the lastest version of flash tool and its got a option of disable verification and worked spot on.
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
dello2002 said:
hi,
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
Click to expand...
Click to collapse
No problem, it could be done, but not so simply. I did rooting and xrecovery installation without Flashtool many times since Flashtool werent possible torun on Linux
Root could be done with exploit zergRush; but try SuperOneClick first. It will take some time root it completely manual.
Same with xrecovery, but its much more simple, pasting three or four files to root FS.
Try superoneclick first, if it wont help, will provide more step by step information.
EDIT:
Simpliest solution - almost forgotten
Download the zip provided underthis post.
Extract the zip file.
Connect your phone to computer (remember, that USB debugging must be on!!!)
Run file runme.bat (command line window will appear).
Enjoy !
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
RELAX first.
You will have to flash the stock SE firmware is by using the X10 Flashtool i .e. get your phone to stock and then root it again.
Here's a video link to the procedure :
http://www.youtube.com/watch?v=HmX-IYNYqL8
And a link to the stock SE firmwares:
http://forum.xda-developers.com/showthread.php?t=920746
I used this firmware :
http://www.4shared.com/file/_Scw5x_R/x10i_301g075_1241-1846.html
Happy Flashing !
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
dello2002 said:
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
Click to expand...
Click to collapse
do you have USB debugging and unknown sources turned on your phone? Because its really strange why adb cant connect.
What ROM and kernel you are currently running on?
@dello what does ur pc say when u type adb devices?
Sent from my X10S using XDA
hi,
running the official rom and kernal that the SEUS installed running 2.3.3
and yes debugging mode and allow are both on but still says cannot connect to deamon, could it be the boot loader? i put ICS on a xperia play and did that fine, do i need to unlock the bootloader like i did with the play?
i did try to but the se website wont unlock it
and ADB in dos wont pick it up list empty
cheers

[Q] PLEASE HELP, X10i in 15second boot loop!!!!

As the subject says guys, I rooted my gf's x10i and installed cwm via Flash tool 2.9.1. Was about to unlock the bootloader to install a custom rom when (I swear this was the dumbest moment in my entire life) I clicked the "Optimize button" (FOR NO REASON) I'm on 2.3.3, it said "phone rebooting", my phone did nothing so I disregarded it. however, when I restarted it, the phone went to the sony erricson screen and just shutdown and restarted again and again and again. I booted into cwm recovery but to my horror it kept saying sd card in use when i try to intall a zip from sd (which I learned from this site means it's the wrong ver. cwm for my phone) So the gist is phone restarts every 10-15 seconds, I can't use cwm properly because of the version. and flashtool because it keeps resetting so quickly.
PLEASE PLEASE HELP!!!!
just simply reflash ? or use SEUS to flash stock software ?
i just read it again an saw the part where flashing wont work but i seem to be able to reflash before getting the SE logo ?
Bjornlindekens said:
just simply reflash ? or use SEUS to flash stock software ?
i just read it again an saw the part where flashing wont work but i seem to be able to reflash before getting the SE logo ?
Click to expand...
Click to collapse
Ok so walk me through this because I'm pretty new to it. When you say you reflash before you get to the SE logo. Does the phone have to be in fastboot? (hold back button?) because flashtool detects it and then it disconnects due to the restart. THANKS FOR THE REPLY!!
the way i do it is
1 select what im flashing (then it will tell you to turn off phone etc.etc.)
2 remove battery
3 unplug phone
4 reconnect phone
5 hold back button and keep holding it
6 slide battery in while still holding back button
about 5-10 sec later it should get detected :s
i really hope this helps because i dont think theres anything you can do if you cant even manage to flash the phone :s
ill look for simular problems and/or info :s
---------- Post added at 04:32 PM ---------- Previous post was at 04:29 PM ----------
this might be a stupid question but try recharging the phone a while if your not doing that already .
The charge light doesn't come on and yea with the 15 second restart, as soon as it is detected, like a few seconds later it restars and says disconnected. I looked all over and there is noone I find with a similar boot loop. I tried wiping my data via cwm recovery but same problem.
Ok so this might be a dumb ass thing to ask but I will ne way. If I can get a backup of someone else's x10 would I be able to apply it via cwm? Or will that fail like the zip install?
i've bin looking around aswell and couldnt find any simular problem
so the only thing i can suggest is not keeping this in the X10 Q&A but try the general aswell this might attract more people scouting trough.
but tbh im unable to see any options because as im reading i collected this info.
1) cant fastboot/flash anything (no option there)
2) cant use CWM recovery cause its the wrong version and reads the internal flash memory (called sdcard) but not your external microsd card (called external1???)
(correct me if im wrong on the second one)
if this is the case what else is there ?
Hi, sorry about your problem. I don't know a lot about this phone but ill give you the steps that got me going when I had a different issue.
This was in an email directly from Sony, hopefully it'll help, if not then at least I tried.
To Repair your phone Software, please follow the steps below:
Click on this link to download PC Companion http://www.sonymobile.com/us/tools/pc-companion/ .
Turn the phone off and disconnect it from the computer. Run the Software.
1. No matter what the program says do not connect the phone until you complete step 9.
2. In the welcome screen if asked click on Start, next you will be shown what Media Go offers, click on "next" then you will see a presentation on what Support Zone offers, click on "Finish".
3. In the next section from "Support Zone” and "Media Go" new select “Support Zone" and click on start.
4. On the next page select "Software Update" and click on "Start".
***At this point if you get an error stating that "unable to install update components" or "server is busy”, please proceed to step 12.
5. The program will say that there is no phone connected and will ask you to connect but disregard that and instead choose the option to "Repair Phone". (The program will issue you a warning on the content that you will lose during the update).
that any data saved only in your phone memory will be erased as part of the Phone Repair.
6. Choose Continue.
7. After that, the program will download the necessary information (several minutes) and it will present you with a list of phones.
8. Choose the X10 from the list (close to the bottom of the list) by clicking on the icon for the phone. Then click on "Next". Then you will see a new section telling you how to connect the phone. (Don't connect it yet!).
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC but not to the phone, then while pressing and holding the back key (the one on the lower right part of the screen that has the icon of an arrow pointing to the left on top) Connect the cable to the phone and keep holding the back key until the program says "The update of your phone has started..." (In some cases a message of "Installing drivers" will appear before the message of "The update of your phone has started..." is shown.).
10. If the steps were not followed exactly the phone will turn on and it will request that you "Proceed with the following steps, slide down the notification bar".
happens disconnect the phone from the cable, turn it off and repeat from step 9).
11. If PC Companion proceeds correctly with the update it will tell you to release the back key.
the update to finish and follow instructions on the screen.
12. If you receive the message: “Unable to install update components".
a. Close PC Companion.
b. Install Java from: http://www.java.com.
c. Start Pc companion again and try to do the software unlock process once more
As part of Sony Mobile's commitment to excellent customer service, we offer a wide variety of mobile products to suit your lifestyle. If you require more information, or have any other questions, please visit www.sonymobile.com or call us at 1-866-766-9374.
Hey guys thanks a bunch, I reflashed using flashtool. Apparently once the flashing takes, flash mode stays on (go fig right? lol) I really do wanna say thank you to you guys who helped me esp Bjornlindekens (I hit thanks don't worry )
Hooray happy i could help and glad for ya to getting it running again! !
Sent from my X10 using xda premium

Trying to unlock bootloader on x10 mini pro

Hi chaps,
After trying a gingerbread rom and finding it too slow, I see most other roms require a custom kernel for best performance (and being able to use most other roms!)
Anyway, I'm running through the tutorials in the stickied Guide in this forum and during the unlocking the bootloader instructions it keeps telling me to switch my phone off.
Now it doesn't mention having the phone plugged into the PC at any point in that section but I assume you have to for the SE Tweaker tool to work .
My problem is that in the first couple of steps I'm told to turn my phone off yet as it's connected to the PC, it keeps switching back on to charge ie. it's not staying off.
So naturally me being afraid of bricking my phone and it being a first time for me, I haven't progressed past this part. Any help or guidance would be much appreciated.
Thanks
LostHH said:
Hi chaps,
After trying a gingerbread rom and finding it too slow, I see most other roms require a custom kernel for best performance (and being able to use most other roms!)
Anyway, I'm running through the tutorials in the stickied Guide in this forum and during the unlocking the bootloader instructions it keeps telling me to switch my phone off.
Now it doesn't mention having the phone plugged into the PC at any point in that section but I assume you have to for the SE Tweaker tool to work .
My problem is that in the first couple of steps I'm told to turn my phone off yet as it's connected to the PC, it keeps switching back on to charge ie. it's not staying off.
So naturally me being afraid of bricking my phone and it being a first time for me, I haven't progressed past this part. Any help or guidance would be much appreciated.
Thanks
Click to expand...
Click to collapse
Turn your phone off and leave it disconnected from your PC
When the unlock procedure asks you to plug in your phone, press the back-button while you connect the usb-cable to your phone.
This way you enter flash-mode, which is what the tools require.
SmG67 said:
Turn your phone off and leave it disconnected from your PC
When the unlock procedure asks you to plug in your phone, press the back-button while you connect the usb-cable to your phone.
This way you enter flash-mode, which is what the tools require.
Click to expand...
Click to collapse
I can't seem to enter flash mode :/
I hold the back button and connect the phone to the pc. Initially it installed some flash driver onto the pc and then booted up as normal.
Now it just boots up as normal no matter how long I hold the back button (throughout the whole process so far)
Does having xrecovery have anything to do with this?
Thanks
Edit - my antivirus was quarantining s1tool.exe! derp.
Edit 2 - Success! Thanks chaps. You're all pretty cool in my books
please i need help to enable network on my phone
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
kingice85 said:
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
Click to expand...
Click to collapse
Did you relock the bootloader before you restored stock rom?
please help
SmG67 said:
Did you relock the bootloader before you restored stock rom?
Click to expand...
Click to collapse
yes i relocked the bootloader before i restored to the SE original stock rom...
I still cant get access to the sim network but can see the sim tool kits..pls help me
solotion
kingice85 said:
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
Click to expand...
Click to collapse
I have had problem like yours on x10i .
but about solotion:
just flash e15i nAa kernel file to your phone by flash tool before this phone must be rooted.100% worked for me .sorry about my english.:laugh:
Help
Hi,
i don't know if this comes under this section also,
i lost the post that i was using to update my x10 mini pro from 2.1 to 2.3 after my pc freezed and restarted.
So my SE finished the update but it's stuck on the Sony Ericsson text on boot up in faint brightness.
I used flshtool 0.9.0.0
rooted the phone and installed busy box.
restarted the phone with the blue screen menu a selected the NAa kernel from SD to load.
After that rebooted the phone then sony ericsson text came very bright then it starts to faint to minimum and nothing else happens.
If i connect flashtool i will get the following:
02/046/2012 14:46:55 - INFO - Device disconnected
02/047/2012 14:47:16 - INFO - Device connected with USB debugging off
02/047/2012 14:47:16 - INFO - For 2011 devices line, be sure you are not in MTP mode
02/047/2012 14:47:24 - INFO - Device disconnected
02/047/2012 14:47:26 - INFO - Device connected with USB debugging on
02/047/2012 14:47:27 - INFO - Connected device : U20
02/047/2012 14:47:27 - INFO - Installed version of busybox : BusyBox v1.19.4-cm7 bionic (2012-02-04 22:27 +0100) multi-call binary.
02/047/2012 14:47:27 - INFO - Android version : 2.3.7 / kernel version : 2.6.29
i even tried SEUS but nothing happens it would ask to reboot in flashmode and the device will enter flashmode and nothing happens.
also tried to restart with the blue screen menu by pressing power and the back button multiple times and back with volume + and - nothing occurs.
I downloaded ver 0.9.1.0
and tried the force root and here is the log:
Any solution ?
Thanks in advance.
nabilaj said:
Hi,
i don't know if this comes under this section also,
...
Any solution ?
Thanks in advance.
Click to expand...
Click to collapse
You have to flash the kernel from flashtool:
Put the kernel zipfile in the /firmwares folder where you installed flashtool
Choose the flash-button
Choose the kernel
Connect your phone in flashmode and it will be done (if your bootloader is unlocked)
You can not install a kernel from the sd-card using the CWM (blue screen) menu
The reason your phone doesn't boot up is because your ROM and Stock kernel are not compatible
If you're succesful in flashing the kernel, you should be fine.
There is no need to root your phone before you flash the kernel, and the ROM is pre-rooted.
stuck on text sony erricson nothing else can be done
Thank you for your reply,
i'm not able to flash anything on the device.
getting Error Flashing. Aborted.
please see the logfile of flashtool 0.9.1.0
and i'm trying to load U20_nAa-14_2.6.29.6-nAa-14.ftf
if i'm doing wrong tell me !
Please have a look at the log file.
Why i'm getting permission denied
and FTError
Thank you in advance.
SmG67 said:
You have to flash the kernel from flashtool:
Put the kernel zipfile in the /firmwares folder where you installed flashtool
Choose the flash-button
Choose the kernel
Connect your phone in flashmode and it will be done (if your bootloader is unlocked)
You can not install a kernel from the sd-card using the CWM (blue screen) menu
The reason your phone doesn't boot up is because your ROM and Stock kernel are not compatible
If you're succesful in flashing the kernel, you should be fine.
There is no need to root your phone before you flash the kernel, and the ROM is pre-rooted.
Click to expand...
Click to collapse
nabilaj said:
Thank you for your reply,
i'm not able to flash anything on the device.
getting Error Flashing. Aborted.
please see the logfile of flashtool 0.9.1.0
and i'm trying to load U20_nAa-14_2.6.29.6-nAa-14.ftf
if i'm doing wrong tell me !
Please have a look at the log file.
Why i'm getting permission denied
and FTError
Thank you in advance.
Click to expand...
Click to collapse
In your original post you said you tried to install the kernel from sd-card using the CWM menu, which is impossible
I suppose you have to unlock the bootloader first, in flashtool it's under the plugins-section.
But you first have to make sure it is safe or you can brick your device doing that
Go find the post where you got the kernel from, it will have a link to the bootloader unlock tutorial.
Use that to get instructions on how to know if your device is safe to unlock.
Then use the bootloader-unlock in flashtool's plugin-menu to unlock the bootloader.
Then flash the kernel.
stuck on text sony erricson nothing else can be done
Yes i did the root and unlocked the bootloader.
and loaded the kernel from SD card using CWM menu.
It was asking to load the kernel from SD card,
i wish i could boot with CWM to give you the exact steps.
The device was i guess able to work but i read somewhere in forum to try rooting again using force psneuter
and that was when things changed on the device cause i used to see in Clean Root icon in flashtool lot of apps and commands in red now only ls: in red is there!!
Regards
SmG67 said:
In your original post you said you tried to install the kernel from sd-card using the CWM menu, which is impossible
I suppose you have to unlock the bootloader first, in flashtool it's under the plugins-section.
But you first have to make sure it is safe or you can brick your device doing that
Go find the post where you got the kernel from, it will have a link to the bootloader unlock tutorial.
Use that to get instructions on how to know if your device is safe to unlock.
Then use the bootloader-unlock in flashtool's plugin-menu to unlock the bootloader.
Then flash the kernel.
Click to expand...
Click to collapse
nabilaj said:
Yes i did the root and unlocked the bootloader.
and loaded the kernel from SD card using CWM menu.
It was asking to load the kernel from SD card,
i wish i could boot with CWM to give you the exact steps.
The device was i guess able to work but i read somewhere in forum to try rooting again using force psneuter
and that was when things changed on the device cause i used to see in Clean Root icon in flashtool lot of apps and commands in red now only ls: in red is there!!
Regards
Click to expand...
Click to collapse
You can NOT flash the kernel from the sd-card
Only from your PC, and your phone does not need to be rooted for that, you only need an unlocked bootloader.
stuck on text sony erricson nothing else can be done
Ok I understood that part.
My question is how to fix my device if possible, i made a mistake somewhere there and don't recall cause i gave up after i looded the rom i think from SD card.
it's over 2 weeks and now i have some free time to try to fix it with the hope of getting someone here on in the forum to help me out.
Thanks
SmG67 said:
You can NOT flash the kernel from the sd-card
Only from your PC, and your phone does not need to be rooted for that, you only need an unlocked bootloader.
Click to expand...
Click to collapse
nabilaj said:
Ok I understood that part.
My question is how to fix my device if possible, i made a mistake somewhere there and don't recall cause i gave up after i looded the rom i think from SD card.
it's over 2 weeks and now i have some free time to try to fix it with the hope of getting someone here on in the forum to help me out.
Thanks
Click to expand...
Click to collapse
Try to do a repair with SEUS or PC Companion
Then flash the kernel
Boot into the CWM menu (included in the custom kernel)
Then flash the ROM you want
stuck on text sony erricson nothing else can be done
I tried,
start SEUS
1-Support Zone
2-Start
3-Phone software update, Start
will get a message could not find phone (repair phone)
will press on repair phone.
4-Phone software update, continue
5-Personal data will be lost tick the box ( i understand that my personal ....) next
6-Please select your phone ( will select U20i) next
7-it will ask to put the phone in flashmode ( will put my phone in flash mode and wait ) NOTHING happens
My phone will boot normally after waiting but stuck on the Sony Ericsson text.
What next ?
once i plug it's pluged it will ask to mount USB card
SmG67 said:
Try to do a repair with SEUS or PC Companion
Then flash the kernel
Boot into the CWM menu (included in the custom kernel)
Then flash the ROM you want
Click to expand...
Click to collapse
nabilaj said:
I tried,
start SEUS
1-Support Zone
2-Start
3-Phone software update, Start
will get a message could not find phone (repair phone)
will press on repair phone.
4-Phone software update, continue
5-Personal data will be lost tick the box ( i understand that my personal ....) next
6-Please select your phone ( will select U20i) next
7-it will ask to put the phone in flashmode ( will put my phone in flash mode and wait ) NOTHING happens
My phone will boot normally after waiting but stuck on the Sony Ericsson text.
What next ?
once i plug it's pluged it will ask to mount USB card
Click to expand...
Click to collapse
hmm, weird, normally the only problem there is that SEUS says there's no firmware available Keep pressing the back-button till it actually starts flashing.
stuck on text sony erricson nothing else can be done
i tried can't feel anymore with my figure of over using it
SmG67 said:
hmm, weird, normally the only problem there is that SEUS says there's no firmware available Keep pressing the back-button till it actually starts flashing.
Click to expand...
Click to collapse

[HELP]X10 Mini pro completely BRICKED.

Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help

Categories

Resources