Related
I was just wondering if anybody else has an issue with loose glass panel towards the edges of your asus transformer prime? In particular folks who just purchased one. There is about a 1/4" of play mostly at the top/left side of the screen around the volume rocker and to a lesser extent on the right side. It's not a lot, but noticable since that's right where you normally hold it.
I already exchanged it for another one at Office Depot, and this new one has the exact same issue. I can't imagine this would be "normal." Maybe just a defective batch? In either case, I haven't noticed any other issues in the 2 days I had the first one.
They both started with S/N# C30KAS...
C1O from office depot reporting in. Have the exact same issue, right out of the box. My case does make it unnoticeable, though. I'd hate to have to rma it for this.
It is not normal. There are little hatches which hold glass to the frame. If they are broken (they are very thin, I guess they can easily be broken on assembly line) there is no way to fix it apart from taking it apart completely and putting some double sided tape. I would, and did, return it.
Sent from my HTC Sensation Z710e using xda premium
omegafiler said:
There is about a 1/4" of play mostly at the top/left side of the screen around the volume rocker
Click to expand...
Click to collapse
Do you realize how much that is? (I assume you mean a quarter inch)
I would just return it.
Yes, it's about a quarter inch. Unfortunately it seems as though these 2 were the last in stock... anywhere. But that's kind of what I thought; just seemed odd to have 2 in a row like that. I guess I'll play with it for a few more days to make sure I still like the TF201 in general and return it later (within the return window). Or maybe if they get a new batch in... exchange it again.
I like to see a picture of this. Quarter inch is really massive.
htcplussony said:
I like to see a picture of this. Quarter inch is really massive.
Click to expand...
Click to collapse
Yeah, it wasn't good, but it's returned now. Although this 2nd one isn't nearly as bad. In fact, it's only loose on the right side. This is probably closer to an 1/8". So it's doesn't go above the outter bezel.
But I guess the question is whether folks consider any play whatsoever acceptable, normal, or something they even care about. In particular if it's in a case. Not to mention the concern that it might get worse or seperate completely.
omegafiler said:
Yeah, it wasn't good, but it's returned now. Although this 2nd one isn't nearly as bad. In fact, it's only loose on the right side. This is probably closer to an 1/8". So it's doesn't go above the outter bezel.
But I guess the question is whether folks consider any play whatsoever acceptable, normal, or something they even care about. In particular if it's in a case. Not to mention the concern that it might get worse or seperate completely.
Click to expand...
Click to collapse
On a good unit there is no play. Actually, there is, but it's so small that you have to be looking for it and even then you'd struggle to find it.
Sent from my HTC Sensation Z710e using xda premium
Had it on a C0 along with light bleed and lint inside the glass...return it 2 days later. Talk about QC...
Sent from my GT-I9100 using XDA
Hmm, maybe I'm just being more picky given the much worse amount of seperation I had with the first device. So here is a quick video I just shot with my phone. Not the best quality, but maybe you guys with "good" primes can let me know what ya think.
Edit: Embed didn't work, so here is the private link.
http://youtu.be/xV6IE16Dj2o?hd=1
I'm having the exact same problem, mine also makes an audible "squeek" when pressed, and the compression is definitely visible. The difference though is that mine came back repaired from when I sent it out for RMA, not a replacement. I'll be getting on the phone tonight with them, as the screen is now also starting to display Mura (which it was sent in for the first time I RMA'd it.), and the screen bleed is getting notibly worse to the point where it is very annoying.
mine is also loose in the upper left hand corner area when held in landscape.
On mine there's still lots of areas I can press down but its under 1mm.
I'm more bummed about dust I now see under the screen. Doesn't Apple laminate the lcd to the screen? Wish Asus done it.
i have the same issue. My wife noticed it and I decided that I could live with it.
Sent from my Transformer Prime TF201 using XDA
To me, this is not a defect. It's definitely an imperfection, but it's not a defect.
goodintentions said:
To me, this is not a defect. It's definitely an imperfection, but it's not a defect.
Click to expand...
Click to collapse
I see it kinda the same way... I only notice it from time to time in landscape mode. But sometimes I have to test the whole side to find the spot again.
I'm having a really great time with the device, can't think about returning it for for this imperfection.
I've got the same problem albeit the flex is very small.
Well, I decided to at least order a MoKo folio cover case and see if that minor flex is still going to be an issue for me or not. I already don't like the way it feels carrying it around by itself. The edges make it feel somewhat awkward and uncomfortable. So maybe the case is all it needs. Because other than that, I haven't found any other issues, yet.
Hey guys. I've heard multiple people comment on how the glass on the front of the Nexus 4 is smoother than any phone screen they've ever touched. Nothing to do with the software or jellybean but like the actual glass surface of the screen.
Does the LG Optimus G have this same buttery smooth glass? Has anyone been able to compare the 2 side by side?
My Nexus 4 will be arriving this week, but as I've always had SD storage on my phones, and I'm on AT&T in Vegas where LTE speeds are 15-50mbps and HSPA is 1-3mbps I'm really thinking I may sell the Nexus and pick up the Optimus G instead. But this butter screen I'm hearing about intrigues me, hopefully it's on the E970 too
play2lose said:
Hey guys. I've heard multiple people comment on how the glass on the front of the Nexus 4 is smoother than any phone screen they've ever touched. Nothing to do with the software or jellybean but like the actual glass surface of the screen.
Does the LG Optimus G have this same buttery smooth glass? Has anyone been able to compare the 2 side by side?
My Nexus 4 will be arriving this week, but as I've always had SD storage on my phones, and I'm on AT&T in Vegas where LTE speeds are 15-50mbps and HSPA is 1-3mbps I'm really thinking I may sell the Nexus and pick up the Optimus G instead. But this butter screen I'm hearing about intrigues me, hopefully it's on the E970 too
Click to expand...
Click to collapse
Not sure about "buttery", but it is slippery as **** all over when you first get it. Be careful with this phone! After a few days of use where your hand-oils get on it, it's not as bad.
As others have remarked - build quality is amazing, battery life is great. Loving this phone... just need to get Google Wallet on it somehow
It has the same glass as the N4 gorilla glass 2.
Sent from my LG-E970 using xda premium
whoamanwtf said:
It has the same glass as the N4 gorilla glass 2.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
We do also have the latest technology from LG, where they have incorporated the touch sensor into the glass. This makes for better response as well as better clarity since the pixels are closer to the screen.
I'ver noticed that this screen gets small scratches much quicker then my Galaxy SII, I had that phone for 2 years and it seriously only got a few tiny scratches through all my use. But after only 4 weeks with my OG, it has the same amount if not more haha. I may return it for a replacement as soon as my screen protectors come in.
What's your source for that info?
http://www.gsmarena.com/lg_optimus_g_e970-5062.php
DISPLAY Type True HD-IPS + LCD capacitive touchscreen, 16M colors
Size 768 x 1280 pixels, 4.7 inches (~318 ppi pixel density)
Multitouch Yes
Protection Corning Gorilla Glass 2
- LG Optimus UI v3.0
It feels buttery smooth to me. It's the most slippery feeling glass I have ever touched on a phone. Let me put it this way: I felt compelled to purchase an insurance plan for the phone. I have NEVER had an insurance on a phone before this phone.
if you set the phone down on any surface that is not perfectly horizontal...it WILL slide off.
DraginMagik said:
if you set the phone down on any surface that is not perfectly horizontal...it WILL slide off.
Click to expand...
Click to collapse
LOL
I actually had it on a completely horizontal surface and it slid off LOL.
I had my phone sitting on the AT&T box that the phone came in, completely flat on my desk. 2 seconds later the phone slid off of it. This is my definition of buttery smooth.
You should check out that room with a level. I bet the room isn't flat
Sent from my LG-E970 using xda premium
Yes, the glass is amazingly smooth.
DeathmonkeyGTX said:
You should check out that room with a level. I bet the room isn't flat
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
My room is perfectly flat!
The other thing I've noticed is that in addition to the smoothness, it doesn't get as smudged up as my prior phones. And it cleans much easier as well, making it awesome. I hate having all kinds of fingerprints on my phone, and this one never has any due to the way the glass is engineered. Awesome stuff.
IrateCustomer said:
The other thing I've noticed is that in addition to the smoothness, it doesn't get as smudged up as my prior phones. And it cleans much easier as well, making it awesome. I hate having all kinds of fingerprints on my phone, and this one never has any due to the way the glass is engineered. Awesome stuff.
Click to expand...
Click to collapse
Yeah that sounds awesome, it always looks so clean in pictures.
So it's pretty much safe to say the screen, touch screen, and glass are basically identical on the Nexus 4 and Optimus G?
My Nexus 4 says it shipped days ago but still no tracking information shows up...was supposed to come yesterday and didn't and yet UPS doesn't know where it's at lol. I just ordered an Optimus G off ebay at a great price so if anything I can try both phones and sell whichever one I don't like, but I really do enjoy LTE over AT&T's horrid HSPA in Vegas. It's basically same exact speeds as 3G. So I'll probably end up keeping the OG even though I love the look of the Nexus. Just put a damn LTE radio in there Google!
This is exactly why I got the first silicone jelly case I could find even if it is normally for an LS 970 instead. Getting tired of picking my phone off the floor..
Sent from my LG-E970 using xda app-developers app
I ordered a replacement N10, because of back flex and got it today.
Not only is the back flex worse, the screen looks worse. Compared to my original N10 the replacement looks duller. My original N10 by far looks more vibrant while the replacement has a noticeable warmer and duller color temp.
Back the replacement goes... I will live with the back flex. I really don't want to play exchange roulette like I did with the nexus 7. Those of you considering exchanging your Nexus might want to consider you might get a worse one.
BamAlmighty said:
I ordered a replacement N10, because of back flex and got it today.
Not only is the back flex worse, the screen looks worse. Compared to my original N10 the replacement looks duller. My original N10 by far looks more vibrant while the replacement has a noticeable warmer and duller color temp.
Back the replacement goes... I will live with the back flex. I really don't want to play exchange roulette like I did with the nexus 7. Those of you considering exchanging your Nexus might want to consider you might get a worse one.
Click to expand...
Click to collapse
Samsung's the single source for the LCD panel. If there are big variations between them it's because the tolerances on the production line are off and their slipping through QC. Some deviation from panel-to-panel is normal. If you put three SGS3's side-by-side each will have a slight variation in temperature. But what you're describing doesn't sound slight.
BamAlmighty said:
I ordered a replacement N10, because of back flex and got it today.
Not only is the back flex worse, the screen looks worse. Compared to my original N10 the replacement looks duller. My original N10 by far looks more vibrant while the replacement has a noticeable warmer and duller color temp.
Back the replacement goes... I will live with the back flex. I really don't want to play exchange roulette like I did with the nexus 7. Those of you considering exchanging your Nexus might want to consider you might get a worse one.
Click to expand...
Click to collapse
I think I had a similar issue to you, but for the better.
My replacement arrived yesterday as my original device had bad back flexing
The new one has a much more vibrant and brighter screen than the old one (the autobrightness seems to react much faster and ramps the brightness more appropriately)
The replacement came shipped with build JVP15L, so I had to two updates, one to JOP20C and then again to JOP20D, weird huh?
Sent from my HTC Desire S using xda premium
so your telling me you got two devices without light bleed? I can't even get one out of them.
This is somewhat good news as I seem to have a warmer screen and also suffer from light bleed so I'm probably going to get it exchanged. Hoping I get a replacement with a neutral or cooler screen. neutral or cooler toned screens tend to have better contrast for some reason vs the warmer screens.
Sent from my Transformer Prime TF201 using Tapatalk 2
tcb4 said:
so your telling me you got two devices without light bleed? I can't even get one out of them.
Click to expand...
Click to collapse
Yeah my first device had quite severe bleed in 3 corners, but my replacement has ever the slightest amount in the bottom corner, but its really not noticeable, even on a black background, so I'm gonna keep this one
Sent from my Nexus 10 using Tapatalk HD
tcb4 said:
so your telling me you got two devices without light bleed? I can't even get one out of them.
Click to expand...
Click to collapse
First unit which I kept has very little light bleed, nothing significant. The replacement had horrible light bleed, there were light streaks coming from the lower right corner.
Other than back flex, I am happy with my N10's screen.
I thought the same about my device but then I turned my brightness up and took it off automatic brightness. I can hardly believe that the difference is that stark between the two units
Sent from my Nexus 10 using Tapatalk 2
Back flex????
Sent from my Nexus 10 using xda app-developers app
muyoso said:
Back flex????
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Yeah if you push hard enough on the back of your device it will dimple inward. I can't really see in my mind why this is considered even remotely a functional defect lol. This just in: plastic flexes when you push on it
Sent from my Nexus 10 using Tapatalk 2
TheEmpyre said:
Yeah if you push hard enough on the back of your device it will dimple inward. I can't really see in my mind why this is considered even remotely a functional defect lol. This just in: plastic flexes when you push on it
Sent from my Nexus 10 using Tapatalk 2
Click to expand...
Click to collapse
It is considered a defect because normally the internal components should touch the inside of the casing, so there is no cavity between the two and therefore no flexing when pressed .
In the case of the flexing units, the casing is bowed ever so slightly outwards, thus creating a cavity, so the casing flexes inwards up until it touches the components inside.
Sent from my Nexus 10 using Tapatalk HD
Hereisphilly said:
It is considered a defect because normally the internal components should touch the inside of the casing, so there is no cavity between the two and therefore no flexing when pressed .
In the case of the flexing units, the casing is bowed ever so slightly outwards, thus creating a cavity, so the casing flexes inwards up until it touches the components inside.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Is it actually a "bow" or is it just an air gap between the battery and the back? Mine flexes when I press it, and makes a "click" like glue forcibly coming unstuck when I release.
It's hardly the end of the world though. I'd never have realised it until it was mentioned on XDA because I'm not heavy handed enough to go squeezing it, nor would I have had cause to "press" hard on the back of it while it's lying face down.
alias_neo said:
Is it actually a "bow" or is it just an air gap between the battery and the back? Mine flexes when I press it, and makes a "click" like glue forcibly coming unstuck when I release.
It's hardly the end of the world though. I'd never have realised it until it was mentioned on XDA because I'm not heavy handed enough to go squeezing it, nor would I have had cause to "press" hard on the back of it while it's lying face down.
Click to expand...
Click to collapse
Mine was both, a bowing which caused an air gap. It didn't click at all, just flexed even when i was just holding it as the bowing was greatest directly underneath where you place your fingers. If i looked edge onto the tablet from the top, the bowing was apparent.
Figured seeing as i'm paying for it, wanted a perfect device and Google were happy to replace it, why not get it replaced?
Hereisphilly said:
Mine was both, a bowing which caused an air gap. It didn't click at all, just flexed even when i was just holding it as the bowing was greatest directly underneath where you place your fingers. If i looked edge onto the tablet from the top, the bowing was apparent.
Figured seeing as i'm paying for it, wanted a perfect device and Google were happy to replace it, why not get it replaced?
Click to expand...
Click to collapse
Indeed, why not. I would have done the same thing.
joke
Now all of you shut up, before I go poking around mine any more and realise I'm not happy with it and end up sending it back for replacement :laugh:
/joke
I feel bad for you people searching for the perfect device. Chances are, the people on their 3-4-5th return are never going to be satisfied, and the devices they returned would most likely have been perfect for someone else. Having OCD about a mechanically flawless techno-gadget is like a Heroin addict chasing the dragon.
Sent from my Nexus 7 using Tapatalk 2
TheEmpyre said:
Yeah if you push hard enough on the back of your device it will dimple inward. I can't really see in my mind why this is considered even remotely a functional defect lol. This just in: plastic flexes when you push on it
Click to expand...
Click to collapse
Shocking news. This flex thing is like that old joke -
Patient: Doc, it hurts when I do this. (Patient flexes a joint.)
Doctor: Then don't do that.
Semantics said:
I feel bad for you people searching for the perfect device. Chances are, the people on their 3-4-5th return are never going to be satisfied, and the devices they returned would most likely have been perfect for someone else. Having OCD about a mechanically flawless techno-gadget is like a Heroin addict chasing the dragon.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I wonder how much cheaper our gadgets would be if hordes of people on XDA didn't RMA 5-6 times because they go actively looking for defects they wouldn't notice otherwise?
I've been thinking about this all day. My N10 has some ripples around the detachable rear cover that I hadn't noticed until looking at the photos in this thread. Is it obvious when I show it to others? No. Does it affect operation in any way? No. Have my fingers ever felt the ripples as I use it or rotate viewing mode? No.
So why are the cosmetics such a big deal to some and not others? Obiously some rate the appearance of the device to be more important than what it does. I know I'm going to get flamed big-time for this, but worship of form over function seems to be a common trait of the Apple crowd. I truly appreciate beauty, but not so much in a tool. I used an iPad for a year and always felt like I was using a fine watch: attractive, but not adaptable to what I wanted to do. Those of us that value function more will probably never understand the other way of thinking.
tcb4 said:
so your telling me you got two devices without light bleed? I can't even get one out of them.
Click to expand...
Click to collapse
Mine has ZERO light bleed and I know all about that. I use to own 3 Infinity's and that's because the first two had intolerable light bleed the third I just lived with.
I'm guessing google sacrificed build quality so they could keep prices down -- Dont really understand why it is important for your device to "look" cool when the purpose of the device is media consumption / productivity. Besides, I would bet upwards of 60% of consumers get a case for their device...whats the point of that back-flex when you have a hard shell case?
is any1 suffering from a raised corner on the front top left where the glass and plastic case touch similar to the image attached.
If I didn't know any better that looks exactly like what would happen if someone tried to haphazardly disassemble his Nexus 10 by trying to pry the glass out of the shell with a screwdriver. That isn't a defect.. That was done by a human.
styckx said:
If I didn't know any better that looks exactly like what would happen if someone tried to haphazardly disassemble his Nexus 10 by trying to pry the glass out of the shell with a screwdriver. That isn't a defect.. That was done by a human.
Click to expand...
Click to collapse
yes but the fact is i never did any such thing, i simply use the tablet as i dont suffer any other issue at all except this which i noticed just today, after a week since i got it that too while installing a screen protector
Hey, mine has one just like that!
Though I'm 73% sure that it happened when I was trying to take it out of its case.
Don't buy crappy cases...
khal_nayak said:
is any1 suffering from a raised corner on the front top left where the glass and plastic case touch similar to the image attached.
Click to expand...
Click to collapse
Aww poor baby, now he can't enjoy his Nexus 10 cause he has a slight raised corner, awwww
Sent from my LG-LS970 using xda premium
shook187 said:
Aww poor baby, now he can't enjoy his Nexus 10 cause he has a slight raised corner, awwww
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
You relish being an a-hole? You buy a 500 dollar tablet and you don't expect to have such things. I personally would call Google for a replacement unless the screen is perfect otherwise. My n10 repair came back with one of those marks after Samsung replaced the screen for dead pixels and the thing had awful flex and light bleed. They also managed to scratch up the back of it and i had to send it back in. If it bothers you get a replacement.
Sent from my often RMA'd Nexus 4, So that I can use the one I'm using now when I get the 6th and hopefully final one.
shook187 said:
Aww poor baby, now he can't enjoy his Nexus 10 cause he has a slight raised corner, awwww
Click to expand...
Click to collapse
Manufacturers must love people like you, they get to make more mistakes with products, while the consumer doesn't care, thus keeping costs down
the fact is i also dont use a case as yet, mayb the defect was since day 1 but i never cared to notice it, untill i was putting on the bodyguardz screen protector
http://forum.xda-developers.com/showthread.php?t=2200381
Here's a link to the thread I started... I had searched and searched, but couldn't find this... someone over there PM'd me this...
You can see my pics, mines exactly the same, but bottom right corner. And I know the plastic's never been picked at, never been out of it's case...
I think there must be batch of these that has this defect... it looks way to smooth and well fitting to be the result of post-production damage.
i would RMA this ASAP. definitely a manufacture defect.
After taking mine apart (trying to get at an ant)... I can tell you that it is definitely a defect (result of inadequate cooling during injection molding, maybe...) I can also tell you it probably does not affect the actual build reliability (quality is a different subjective measure that is an individual matter), due to how they are assembled.
Sent from my SGH-T889
Poser said:
After taking mine apart (trying to get at an ant)... I can tell you that it is definitely a defect (result of inadequate cooling during injection molding, maybe...) I can also tell you it probably does not affect the actual build reliability (quality is a different subjective measure that is an individual matter), due to how they are assembled.
Sent from my SGH-T889
Click to expand...
Click to collapse
That's what I was looking for. Awesome sauce. Thanks!
Sent from my Galaxy Nexus using xda premium
DefinityX said:
That's what I was looking for. Awesome sauce. Thanks!
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
No worries.
Sent from my SGH-T889
To be honest I would take a raised corner over light bleed. I'd weigh the pros and cons before RMA lol
Sent from my Nexus 10 using Tapatalk HD
I would do a RMA in every circumstances .
- Rised corners
- battery issues
- not working usb , hdmi socket
- screen bleeding
- constant wifi drop
- constant restarts with stock rom
- speakers buzz
And any other unusual problems that are not in the specs
Its a product made by samsung supervised by google for god sake ... Should be a allmost flawless device with little devices with problems .
( Question : its that hard to pun a big battery and a small circuit board inside a solid case ? ) ipad and all the other tablets cost too much for a simple thing called material . software shoul cost more valuable because it is free and inteligence its there more than hardware ..
We all have problems here with this .. It s too much
Shame !
Sent from my Nexus 10 using xda app-developers app
Its the quality control... there is none...
This just feels like a rush job to me.
samwheat said:
I would do a RMA in every circumstances .
- Rised corners
- battery issues
- not working usb , hdmi socket
- screen bleeding
- constant wifi drop
- constant restarts with stock rom
- speakers buzz
And any other unusual problems that are not in the specs
Its a product made by samsung supervised by google for god sake ... Should be a allmost flawless device with little devices with problems .
( Question : its that hard to pun a big battery and a small circuit board inside a solid case ? ) ipad and all the other tablets cost too much for a simple thing called material . software shoul cost more valuable because it is free and inteligence its there more than hardware ..
We all have problems here with this .. It s too much
Shame !
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
So far I have see those problems and those make me think twice before buy it.
1- getting too hot easily. Not only when recording 4k videos some users find it getting too hot while browsing Internet. That's not acceptable. I don't want it to be blown off in my hand.
2- screen is dim. I thought that's since I watch the videos on YouTube. Other phones such as samsung s5 and HTC One m8 has got a lot brighter screen. If it is sunny you can see your phone screen that's not good for people especially in hot countries.
3- gap issues. I don't know if this is a big issue but still shouldn't be like that.
4- speakers. So people are happy some people are not. Some people are having issue with income calls they say it's not loud enough and only one speaker works.
Those are so far I can remember/told by people here. Maybe that's why it's been delayed for release who knows.
Do you guys have any other issues with the phone? Please let us know £550 for pay as you go phone is a lot of money I don't wanna regret after I buy it.
Sent from my GT-N7100 using XDA Premium 4 mobile app
PiskopatYazar said:
So far I have see those problems and those make me think twice before buy it.
1- getting too hot easily. Not only when recording 4k videos some users find it getting too hot while browsing Internet. That's not acceptable. I don't want it to be blown off in my hand.
2- screen is dim. I thought that's since I watch the videos on YouTube. Other phones such as samsung s5 and HTC One m8 has got a lot brighter screen. If it is sunny you can see your phone screen that's not good for people especially in hot countries.
3- gap issues. I don't know if this is a big issue but still shouldn't be like that.
4- speakers. So people are happy some people are not. Some people are having issue with income calls they say it's not loud enough and only one speaker works.
Those are so far I can remember/told by people here. Maybe that's why it's been delayed for release who knows.
Do you guys have any other issues with the phone? Please let us know £550 for pay as you go phone is a lot of money I don't wanna regret after I buy it.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
1..... All phones these days get warm when in use, id be more concerned if it wasnt heating up, as for the 4k recording it doesnt bother me too much, its not a feature ill be using anytime soon and im assuming the related software can be fine tuned and updated by sony so it doesnt strain the processor as much
2......Im in great britain so not the sunniest place but weather was quite bright over easter weekend and i had no issues seeing the screen outside
3......As long as its not affecting the water resistance, who cares. If in doubt either treat it like any other phone near water or get it tested by sony
4......Speakers im 50/50 on.... the sound is crisp and clear, just not as loud as other phones. The sound is supposed to be mono on an incoming call, it also cuts to one speaker on my blutooth speakers and on my galaxy if i have headphones in and recieve a call the right earphone cuts out
numskull said:
1..... All phones these days get warm when in use, id be more concerned if it wasnt heating up, as for the 4k recording it doesnt bother me too much, its not a feature ill be using anytime soon and im assuming the related software can be fine tuned and updated by sony so it doesnt strain the processor as much
2......Im in great britain so not the sunniest place but weather was quite bright over easter weekend and i had no issues seeing the screen outside
3......As long as its not affecting the water resistance, who cares. If in doubt either treat it like any other phone near water or get it tested by sony
4......Speakers im 50/50 on.... the sound is crisp and clear, just not as loud as other phones. The sound is supposed to be mono on an incoming call, it also cuts to one speaker on my blutooth speakers and on my galaxy if i have headphones in and recieve a call the right earphone cuts out
Click to expand...
Click to collapse
You would be more concerned if it wasn't heating up?
You don't care about gaps?
Yeah... we now know you...
Lol... Anyway do u think they will do a fix for the one speaker ****e...
Sent from my HTC One_M8 using xda app-developers app
yep id definately be concerned if it didnt heat up while im using it, just about every electrical item i own heats up when in use, if it doesnt then its probably not working properly.......
I dont mind gaps...... as long as they dont affect the waterproofing, my z2 appears to have a couple of (extremely small, less than 1mm) gaps, but im not about hide it away in shame or demand an exchange for a cosmetically perfect handset.......... unless of course they cause the phone to die a watery death, but i doubt that
and finally i'll stick with my overall opinion of the speakers, but as for the one speaker dropping out ignore anything i said, i was mistaking what you was on about with something else.... my bad lol
I have just received my z2 this morning - opened the box and found the phones back glass panel is raised above the edge of the phone in one corner by 1mm or so.. from the Power button to the bottom corner.
It spoils the whole feel of the phone as its easy to catch the glass.. I imagine its going to get damaged quickly
So I now have to contact company I got it from to arrange a swap, or send it off to Sony.. probably at my own expense.
Premium phone and price with not so premium build quality.. This should never have passed Quality Control.
Peav said:
I have just received my z2 this morning - opened the box and found the phones back glass panel is raised above the edge of the phone in one corner by 1mm or so.. from the Power button to the bottom corner.
It spoils the whole feel of the phone as its easy to catch the glass.. I imagine its going to get damaged quickly
So I now have to contact company I got it from to arrange a swap, or send it off to Sony.. probably at my own expense.
Premium phone and price with not so premium build quality.. This should never have passed Quality Control.
Click to expand...
Click to collapse
Well this isn't very reassuring.
Peav said:
I have just received my z2 this morning - opened the box and found the phones back glass panel is raised above the edge of the phone in one corner by 1mm or so.. from the Power button to the bottom corner.
It spoils the whole feel of the phone as its easy to catch the glass.. I imagine its going to get damaged quickly
So I now have to contact company I got it from to arrange a swap, or send it off to Sony.. probably at my own expense.
Premium phone and price with not so premium build quality.. This should never have passed Quality Control.
Click to expand...
Click to collapse
give it back to place you bought. do not give a single penny for returning it. its not your fault and it is not supposed to come out from your pocket. do not get it fixed get a brand new one.
faulty phones make me think again why the z2 is postponed so many weeks ahead. there is definitely something wrong with this phone in one point. overheating, out of shape design, gaps on the top of the device, speakers etc.
PiskopatYazar said:
give it back to place you bought. do not give a single penny for returning it. its not your fault and it is not supposed to come out from your pocket. do not get it fixed get a brand new one.
faulty phones make me think again why the z2 is postponed so many weeks ahead. there is definitely something wrong with this phone in one point. overheating, out of shape design, gaps on the top of the device, speakers etc.
Click to expand...
Click to collapse
Do you think they would have solved all these problems by the start of May (which is when most people get their phone)? If not then all these delays would have been a complete waste of time...
Fadeless said:
Do you think they would have solved all these problems by the start of May (which is when most people get their phone)? If not then all these delays would have been a complete waste of time...
Click to expand...
Click to collapse
Start of may is not guaranteed for release. Some companies giving date for 24th of may. Hope everybody will be happy at the end of the day but Sony is not doing well so far. Postpone is a really bad start and faulty phones comes up after waiting months or weeks is more disappointing. If you are not ready for launch do not announce your phone.
Sent from my GT-N7100 using XDA Premium 4 mobile app
PiskopatYazar said:
give it back to place you bought. do not give a single penny for returning it. its not your fault and it is not supposed to come out from your pocket. do not get it fixed get a brand new one.
faulty phones make me think again why the z2 is postponed so many weeks ahead. there is definitely something wrong with this phone in one point. overheating, out of shape design, gaps on the top of the device, speakers etc.
Click to expand...
Click to collapse
Replacement arranged - company picking up phone free of charge in the morning.
No Idea when the replacement will be received though.
Peav said:
I have just received my z2 this morning - opened the box and found the phones back glass panel is raised above the edge of the phone in one corner by 1mm or so.. from the Power button to the bottom corner.
It spoils the whole feel of the phone as its easy to catch the glass.. I imagine its going to get damaged quickly
So I now have to contact company I got it from to arrange a swap, or send it off to Sony.. probably at my own expense.
Premium phone and price with not so premium build quality.. This should never have passed Quality Control.
Click to expand...
Click to collapse
Post pics please
Sent from my Xperia Z1
Jiyeon90 said:
Post pics please
Sent from my Xperia Z1
Click to expand...
Click to collapse
I cannot get a decent close up using my OneX..
I'll hunt out my normal camera and see if I can get a decent close up.
Peav said:
Replacement arranged - company picking up phone free of charge in the morning.
No Idea when the replacement will be received though.
Click to expand...
Click to collapse
will probably take 2 weeks hopefully quickest.
make sure they dont replace it with refurbished one. if they do insist on brand new one.
Take a look at here http://talk.sonymobile.com/t5/Xperia-Z2/bd-p/xperia_z2 a few Problems are posted.
Best Pic I could get :-
h.t.t.p://i.imgur.com/e0G13F9.jpg (Cannot post links - file to big to attach to this post I think sorry XDA! )
You can see the glass panel is raised above the aluminium frame.
Peav said:
Best Pic I could get :-
h.t.t.p://i.imgur.com/e0G13F9.jpg (Cannot post links - file to big to attach to this post I think sorry XDA! )
You can see the glass panel is raised above the aluminium frame.
Click to expand...
Click to collapse
Damn, that's really poor workmanship. Let's hope your replacement is perfect and you don't need to wait too long
Sent from my GT-N7100 using Tapatalk
Peav said:
Best Pic I could get :-
h.t.t.p://i.imgur.com/e0G13F9.jpg (Cannot post links - file to big to attach to this post I think sorry XDA! )
You can see the glass panel is raised above the aluminium frame.
Click to expand...
Click to collapse
Out of interest Peav where are you from/where did you get the handset from? Yeah I agree with kersey that is outrageous.
sui81 said:
Take a look at here http://talk.sonymobile.com/t5/Xperia-Z2/bd-p/xperia_z2 a few Problems are posted.
Click to expand...
Click to collapse
Oh man there are a lot more problems than I thought. People complaning to Sony directly instead of telling people here . I think Im right with my opinion never buy a newly released phone there are always problems at some point. Wait a month or so and get them after. My wife bought newly s4 when it was out the phone was getting far too hot she was scared to use it cos it might blow off on her hand. we complained and got a brand new one which is okay. All my old iphones were the same some had sound problem some had glass problem.
It seems that Sony were in so much of a rush to assemble the phones to get them 'out there' that quality control suffered big time.
Am gonna make sure that mine is perfect before keeping it even if it means returning it time after time.
Am hoping all of these build issues are solved when its officially released in May
Sent from my GT-N7100 using Tapatalk