Related
I have tried for the past 4 hours to install the AOSP MIUI ROM. I have tried a newer recovery, a mtd kernel. No luck. I install the rom in CWM 2.5, but it boot loops at that point and states that the sd card can not be mounted. It then counts down to 20 and resets over and over. Can anyone shed light and provide steps?
Well the first thing I would do for yourself is to Odin back to stock using the 2.2 pit file as well as odining the stock 2.2 ROM. Make sure you repartition as well so that everything is formatted!!! This will solve SO many issues and give prospective forum members a place to start with your problems you are having.
2.2 Pit file - http://download180.mediafire.com/09z...atlas_v2.2.pit
2.2 stock froyo - http://www1279.megaupload.com/files/...EL.tar.md5.tar
I am going to assume you have odin and not link a download simply for the fact that if you have read ANYTHING pertaining to CM7 or MIUI in our forums you should be well aware of how to use it.
After wiping you will need to flash the modem you want via odin. They are located in the sticky in the dev thread.
After this you will need to flash the CWM that is located in the CM7 or MIUI threads themselves.
here is a link : cwm3_fixed_for_cm7-ODIN.tar
Use odin to flash it, then simply flash the AOSP package of your choice from the their respective threads here in the forums.
TedLWJR said:
I have tried for the past 4 hours to install the AOSP MIUI ROM. I have tried a newer recovery, a mtd kernel. No luck. I install the rom in CWM 2.5, but it boot loops at that point and states that the sd card can not be mounted. It then counts down to 20 and resets over and over. Can anyone shed light and provide steps?
Click to expand...
Click to collapse
Also worth noting that I missed in the first post. You mentioned CWM 2.5....sadly this will not work nor will it work with any other CWM floating around. The ONLY way currently to flash it is with the CWM I linked above. These are from JT and fixed to work with the AOSP ROMs.
from JT himself
*** The recoveries attached below are ONLY to be flashed on a BML ROM, ie: touchwiz based ROM or earlier, non-MTD CMx ROM. DO NOT FLASH THEM IF YOU ARE CURRENTLY ON CM7 OR MIUI MTD ROMS! ***
Click to expand...
Click to collapse
Thank you, I tried to use the new recovery provided by JT, alas it did not work for MIUI, I will try again tomorrow when spirits are higher, I usually start from DL09 and OTA my way back to ED04, Do i have to stay on EB01 or can i use ED04, and yes i am familiar with odin. Thanks again my friend.
TedLWJR said:
Thank you, I tried to use the new recovery provided by JT, alas it did not work for MIUI, I will try again tomorrow when spirits are higher, I usually start from DL09 and OTA my way back to ED04, Do i have to stay on EB01 or can i use ED04, and yes i am familiar with odin. Thanks again my friend.
Click to expand...
Click to collapse
Don't quote me.... It shouldn't matter (EB01, ED01, ED04...etc) All that is needed is the updated recovery to run the package install. The package will format your filesystem so your version should not matter. If you are referring to the modem... its your preference. I am on EC01 but last time I was on like ED04 or something...
Might also try flashing CM7 first, booting in, then flashing MIUI since they use the same BML format.
Still no dice, I'm sick of trying this, I have Odined back to 2.2 around 10 times already. A good write-up is definitely necessary.
What kernal are you loading with ED04, etc.. before trying CM7?
Stock as i think i read that the rom includes a kernel, should i try a MTD kernel and then flash CM7/MIUI?
No, I was just making sure you weren't loading any voodoo kernals.
When I had issues loading MIUI, I went all the way back to the DI01 all in one rom (odin) then DL09, then CWM Fix all (3.x), then MIUI. Load the rom before you load the MIUI cwr.
I'm having major problems too. I've tried about every method to get onto CM7, but I either end up with boot loops or get stuck on the GalaxyS/CM7 boot screen for a long time (over 30 minutes).
I've started from almost every platform (stock back to DI01, comrom, evil, ....)
Used JT's cwm and still no go. I've rebuild my partitions in both odin and heimdall, I don't know what else to try myself.
I've gotten to the same place with the Galaxy S and Cyanogen screen, help is appreciated.
Sent from my SCH-I500 using XDA Premium App
im in teh same situation. ive tried doing everything i can find and i NEED miui on my phone.
haha seriously any additional help would be appreciated
i have a samsung fascinate on verizon. now i used to have fun with roms and themes and what not on my phone.... since the update of the clockwork mod, it has been impossible. i have tried everything, amend2edify programs, odin, and every superclean rom seems to have the same thing, nothing differs and my phone goes right back to a new superclean rom i used and it is impossible to theme it or do anything different other than use it. this is boring and extremely frustrating. with no customization, what good is the phone?
if it helps.. my firmware is 2.2.1 / eb01 / dl09
im lost. everytime i try to flash anything from cwm i get an error, it takes my phone 4 mins to boot and then nothing. every time!
I know i am rooted successfully, seems once they switched from amend scrpts i lost my talent? and the cwm i have is orange screen (latest one dl from market and flashed) and i STILL boot to blue recovery and have to run update.zip to get to orange, without fail every time. it will not load on its own when i boot to recovery. crazy. maybe i am missing something here? someone please help me!
thank you.
phil4c said:
i have a samsung fascinate on verizon. now i used to have fun with roms and themes and what not on my phone.... since the update of the clockwork mod, it has been impossible. i have tried everything, amend2edify programs, odin, and every superclean rom seems to have the same thing, nothing differs and my phone goes right back to a new superclean rom i used and it is impossible to theme it or do anything different other than use it. this is boring and extremely frustrating. with no customization, what good is the phone?
if it helps.. my firmware is 2.2.1 / eb01 / dl09
im lost. everytime i try to flash anything from cwm i get an error, it takes my phone 4 mins to boot and then nothing. every time!
I know i am rooted successfully, seems once they switched from amend scrpts i lost my talent? and the cwm i have is orange screen (latest one dl from market and flashed) and i STILL boot to blue recovery and have to run update.zip to get to orange, without fail every time. it will not load on its own when i boot to recovery. crazy. maybe i am missing something here? someone please help me!
thank you.
Click to expand...
Click to collapse
I believe u need to odin a stock rom/kernal/radio package before switching roms. Look up the official verizon ed05 pacakage in the development section. Also read the stickies in there aswell.
Odin ed05.tar w/ pit
Boot up once
Odin cwm that's required by rom
Boot into recovery
Wipe data
Install rom.zip
i am trying this now. thank you in advance!
ok now, forgive me for sounding like an idiot (cuz i am) when you say odin cwm required by rom, am i sideloading cwm basically thru odin? and where would i find a download for cwm? im stock ed05 across the board now. thanks!
phil4c said:
ok now, forgive me for sounding like an idiot (cuz i am) when you say odin cwm required by rom, am i sideloading cwm basically thru odin? and where would i find a download for cwm? im stock ed05 across the board now. thanks!
Click to expand...
Click to collapse
yep here ya go
http://dl.dropbox.com/u/25089906/cwm-recovery-ALL.tar
odin this after you have booted up on ed05 once
boot into cwm by holding both volume up/dow and power buttons until the samsung logo appears twice
wipe data
install powerwashED05.zip from sd card
reboot and enjoy your rooted/debloated/de touchwized/ deodexed/zip aligned rom!
thank you for all of your help. i am now back to enjoying my phone everything works perfect and it is just the way i want it. now all i need to do is start to keep up with the changes so i dont lose track of how to do stuff.
thanks again!
Glad that it worked...enjoy!
this is what i get for oding late at night but i managed to do something very very stupid I odined my phone with a one click package for my captivate
I've been able to get the phone back in mostly working order now though.. but i feel in my gut something still may not be right.
here is where i got the package
http://forum.xda-developers.com/showthread.php?t=1300843
This below is what version i accidently installed.
I897UCKI2 Android 2.3.5 Gingerbread
With Bootloaders - Link to thread - Second Post [With CWM Injected Kernel from Boog]
so after i made this mistake.. (noticed my phone had a at&t bootscreen an wouldn't load) I went forth an flashed stock firmware avail for aiotools for the vibrant an then installed the stock froyo bootloader
I'm hoping everything is right in its place well except once i get cm9 flashed it boots up an shows a EU error so i freak yank the battery an odin this phone back into the stoneage an well... surprisingly.... my internal memory is 100% there O.O
anyways current issue is not being able to get cm7 to install though i'm probably missing something due to being tired anyways..
help sugestions banter calling me a noob I just want to make sure i did possibly everything to fix this mistake.
pintek said:
I'm hoping everything is right in its place well except once i get cm9 flashed it boots up an shows a EU error so i freak yank the battery an odin this phone back into the stoneage an well... surprisingly.... my internal memory is 100% there O.O
Click to expand...
Click to collapse
You,my friend, dodged a bullet here.
pintek said:
anyways current issue is not being able to get cm7 to install though i'm probably missing something due to being tired anyways..
Click to expand...
Click to collapse
Well, when you say you are not able to get CM7 to install, what exactly is it doing?
Are you getting thrown into a bootloop (caused by CWR mismatch and pretty common)? If so, pull battery and boot into recovery and re-flash CM7 over itself again. No wipe. Then reboot.
You may have to flash a different kernel, like glitch or something like that. But try the above first. Should work for you. Does it still say ATT when you boot up?
Lucky for you, everything is good, but if you want to flash a GB or higher ROM, i would suggest you flash the bootloaders in this thread: http://forum.xda-developers.com/showthread.php?t=1117990
After that just flash CM9, and you *should* be good, if not, try flashing it again with wiping data, cache, and dalvik cache. I guarantee that will work.
I ended up having to format both SD cards an retrying install custom rom via aio tool an with luck was able to get cm7 installed then cm10 an i dno't have the ime error everyone else seams to have . I did before this flash the gb bootloader over this cause it was the only thing that managed to remove the at&t splash screen before the kernal.
Lesson I learned....
remember that the vibrant you use aio tool not a premade pack >.<
an ya i do own both phones so this does complicate things now an then <,<
I also have both devices. Set up two different folders on your pc, one marked i897 and the other t959. I also add i897 or t959 to any files that could possibly get mixed up in Odin.
Its peanut butter jelly(bean) time...
Hello all,
I have a question that has not been answered after many hours of searching. Hopefully I'm just dumb, and my buddy's stock firmware and data isn't hosed. I'm trying to get his stock firmware running again so I can back it up safely.
What I've done:
Tried to flash CWM's update.zip via stock recovery (signature verification failed on the three different zip's I could find in the forums and various links)
Used Heimdall to push "cmenard-T959-CWM" zImage (this worked, and I get a different screen at boot)
The phone boots to the point of the T-Mobile splash screen with the annoying shriek sound, but goes to a black screen after. If i touch any of the soft buttons, they light up and remain lit. It'll stay like that for at least 20 minutes.
Is it possible to re-flash the system partition and not the data partitions using ODIN? Is that even feasible? Like I mentioned above, I'd like to get the stock firmware running such that I can make a good backup of it with all the user data intact. I haven't been able to because the CWM+root wouldn't flash.
Any suggestions or insight would be greatly appreciated.
thanks in advance!
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Toast6977 said:
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Click to expand...
Click to collapse
Thanks for the suggestion, Toast. I don't believe the internal SD has been messed with, and I don't plan to mess with it either. The thread you linked is not quite related to my issue, as far as I can tell.
I am able to get into Download Mode, and the Stock Recovery mode as well. However every time I try to flash an 'update.zip' with the Stock Recovery, I get an error about Signature Verification Failure.
After stepping back from it for a day, I think I've gained some clarity. Since all I've done is flash a different Kernel with Heimdall, I'm going to try to flash a stock kernel then see what happens.
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Toast6977 said:
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
Click to expand...
Click to collapse
Woodrube said:
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Click to expand...
Click to collapse
hahaha poltergeist!
Wow, so I'm glad I asked. I wouldn't have known about this issue, as I do not have any history with this device.
I know that the ROM is currently 2.2, and the Android System Recovery is showing "3e".
If I understand correctly, once I'm ready to flash up to ICS, I'll need to ODIN back to 2.1 to get Android System Recovery "2e", which will let me flash 'update.zip' packages freely. Then I flash an 'update.zip' to get CWM, then flash CM7, then CM9 (and CM9 is my intended destination).
The things mentioned in the thread you linked do appear to apply to my situation.
However I still want to get the stock OS booted and working, then do a Nandroid backup of it. (it's the computer tech/security pro in me. Since I'm new to this device, I -tried- to read up on everything first, and didn't want to make a change without being sure it would work.)
Does anyone happen to know if flashing a stock kernel over the 'cmenard' kernel will harm anything, and hopefully get a successful boot? Again, I'm trying to get the stock ROM booting again in order to verify I have everything I need off of it, then do a nandroid backup. Flashing to CM9 will come afterwards.
Ok, here are some things for you.
Here is a kernel pack that you can use. Read the OP because there are Froyo AND Gingerbread kernels in there.
[KERNELS] Moped_Ryder SGS Kernel Pack v2 [20+ Froyo/GB Kernels]
I really suggest using something like BaliX 1.2 or BaliUV kernels to make your back up. They are smooth, fast and OC/UV-able. To flash just Wipe /cache, /dalvik -> flash kernel -> Wipe /cache, /dalvik (I also fix permissions too bc that is the way that I learned and I just do it that way all the time). Reboot and Bam!! you should be able to get to the point that you can make a backup.
Look in my signature, there are downloads and flashables that are direct download linked. There is also an ICS install guide that can help your journey. Once you have your backup, then use Odin from the Toolbox in my signature and flash back to stock JFD. From there you will be able to follow my guide.
If you need any files, just let me know and I will upload them when I get home (won't be until late though, i have plans right after work).
Using HB, can I choose any theme? I am not so acquainted with the Theme chooser and boot animation of my phone. I flashed a boot animation zip yesterday and it was stuck in "ANDROID" screen. So I have to flash again. I never used any boot animation and themes in my phone yet. I want to know about them.
Sent from my SGH-T959 using xda app-developers app
Wrong thread. Put that question in the Jelly Bean Banter thread. No need to hijack this thread until we get OP up and running.
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
maxpeet said:
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
Click to expand...
Click to collapse
Wrong they are not the same. cwm can do the work without a PC beside you can erase, back up , restore and flash, which make our life easier, heimdall or Odin ," I prefer odin "are the last option when you can't fix it with cwm
To fix your phone use Odin or heimdall and go back to stock don't worry all your files, photo, music, will be safe. Then
1 get root on you , if you don't how ask
2 get cWm
3 do a nandroid back up
4 have fun flashing all roms you want lol
Sent from my SGH-T989 using xda app-developers app
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Toast6977 said:
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Click to expand...
Click to collapse
do no check de re-partition button and use a .pit file follow this tutorial and you will be fine
http://forum.xda-developers.com/showthread.php?t=848737
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good: