Related
I just upgraded from the Skyrocket to the Note yesterday. I had the Seidio Active combo on my Skyrocket. It's a great case, but it was a little bulky and the rubber was too grippy for jeans.
I'd like to find the thinnest case possible for the Note, but I want something that protects the screen edge with a slightly raised portion. The Gorilla Glass is harder to break than normal glass, but it can be broken and it scratches just as easily.
Some of the slim cases I have seen don't offer the screen edge protection, like the SPG and the Elago. Any ideas? Maybe I should just get a bumper case.
http://www.case-mate.com/Samsung-Ga...g-Galaxy-Note-Note-LTE-Barely-There-Cases.asp
I use the Rearth Ringke slim and like it. The only raised part is on the corners, though, so you may not like it. The sides are largely uncovered.
Corvette Dave said:
http://www.case-mate.com/Samsung-Ga...g-Galaxy-Note-Note-LTE-Barely-There-Cases.asp
Click to expand...
Click to collapse
Paying $25 for that case is just foolish.
I bought this one for $7:
http://www.ebay.com/itm/WHITE-GLOSS...802561?pt=PDA_Accessories&hash=item3371d03501
Its not that thick, its cheap and its secure.
The Boxwave Unicolor case is pretty thin. I also like that it combines TPU for the edge to protect the corners but uses hard plastic on the back to allow it to easily slide in and out of pockets. I always find TPU is just too sticky for the entire case. One added perk: The back plastic is see-thru so the phone still looks pretty stock if you like that look.
On Amazon for like $14. I think you can find other manufacturers of the same case on eBay for cheaper, but I jus tuse Amazon because it's easier. http://www.amazon.com/gp/product/B0...&pf_rd_t=101&pf_rd_p=470938631&pf_rd_i=507846
I got a clear TPU case, both form and function are just fine. It comes up and over the edge of the screen just enough to add some protection, and easily slides in and out of all my pockets, and my jeans don't hang off of me I got it from this guy for just $1.99 delivered.
I got this case:
http://www.amazon.com/elago-Slim-Ca..._1_1?s=wireless&ie=UTF8&qid=1331234426&sr=1-1
Having used Barely There cases in the past, I'd say this is just as thin, same quality, and much cheaper.
deeken said:
Paying $25 for that case is just foolish.
I bought this one for $7:
http://www.ebay.com/itm/WHITE-GLOSS...802561?pt=PDA_Accessories&hash=item3371d03501
Its not that thick, its cheap and its secure.
Click to expand...
Click to collapse
I would have to agree. I usually take off the case after a few months. The thinnest case I found is .2mm from this guy.
Barry (NJ) said:
I got a clear TPU case, both form and function are just fine. It comes up and over the edge of the screen just enough to add some protection, and easily slides in and out of all my pockets, and my jeans don't hang off of me I got it from this guy for just $1.99 delivered.
Click to expand...
Click to collapse
Holy sh*t! Less than 2 bucks delivered from Hong Kong? How does this guy make any money?
Corvette Dave said:
http://www.case-mate.com/Samsung-Ga...g-Galaxy-Note-Note-LTE-Barely-There-Cases.asp
Click to expand...
Click to collapse
I don't think the Barely There cases allow you to lay the phone face down without scratching the screen.
LiquidArrogance said:
I use the Rearth Ringke slim and like it. The only raised part is on the corners, though, so you may not like it. The sides are largely uncovered.
Click to expand...
Click to collapse
I think this one may be the slimmest, but it doesn't look like it allows you to lay the phone face down either.
Barry (NJ) said:
I got a clear TPU case, both form and function are just fine. It comes up and over the edge of the screen just enough to add some protection, and easily slides in and out of all my pockets, and my jeans don't hang off of me I got it from this guy for just $1.99 delivered.
Click to expand...
Click to collapse
This case looks promising as long as it doesn't stick in my pants pocket. For $1.99, I can afford to try it out.
dcfella said:
I got this case:
http://www.amazon.com/elago-Slim-Ca..._1_1?s=wireless&ie=UTF8&qid=1331234426&sr=1-1
Having used Barely There cases in the past, I'd say this is just as thin, same quality, and much cheaper.
Click to expand...
Click to collapse
As I said in my post, the Elago does not protect the screen edges.
I really don't think any of the ultra-thin cases have screen lip protection. I have the Elago, but rarely use it. Find a slightly bigger case that does and make the compromise. I love the Zenus Air Capsule. It has a screen lip, has a kickstand, hard plastic so it slides in and out of pocket easily and is less bulky than the Speck, Casemate and most of the other "mid" protection range cases. Just my 2c!
Sent from my Samsung Galaxy Note LTE™
S-Line tpu cases are thin and have a lip above the screen.
Sent from my SAMSUNG-SGH-I717 using XDA
dcfella said:
I got this case:
http://www.amazon.com/elago-Slim-Ca..._1_1?s=wireless&ie=UTF8&qid=1331234426&sr=1-1
Having used Barely There cases in the past, I'd say this is just as thin, same quality, and much cheaper.
Click to expand...
Click to collapse
I have never used the Barely There case or Elago but in the screenshots on amazon of that elago case, it looks like the bottom is unprotected. Is that how the Barely There case is as well? I currently use the RearthUSA Slim case which I like but it seems a little too think. I would like to get something thinner!
Hi there,
Im looking for thin case.
Best I have found is this case on ebay
Design is not bad, but its not covering glass area around the camera.
Questions:
1. Is there any thin case(plastic, rubber) that covers that?
2. Anyone tried skins? Will they remove easily(considering phone is jeans pocket)?
3. Those who are using various rubber, gel, hybrid and so on cases, how much fatter is your phone with them? If its not that much fatter suggestions on good cases then
stifler05 said:
Hi there,
Im looking for thin case.
Best I have found is this case on ebay
Design is not bad, but its not covering glass area around the camera.
Questions:
1. Is there any thin case(plastic, rubber) that covers that?
2. Anyone tried skins? Will they remove easily(considering phone is jeans pocket)?
3. Those who are using various rubber, gel, hybrid and so on cases, how much fatter is your phone with them? If its not that much fatter suggestions on good cases then
Click to expand...
Click to collapse
Try looking into the otterbox defender, or ballistic hc.
b1gsby_02 said:
Try looking into the otterbox defender, or ballistic hc.
Click to expand...
Click to collapse
Thanks mate
I found this one, and I´ll go with that one probably
I have tried them all, best case is either the capdase brand or official HTC TPU case. They both let your phone slide into your pocket easy, don't bulk out your phone, look great and offer good protection.
The Ebay jobs are just cheap rubbish you get fed up with after a week or 2.
Sent from my HTC EVO 3D X515a using XDA
vervester said:
I have tried them all, best case is either the capdase brand or official HTC TPU case.
Click to expand...
Click to collapse
Any link for official HTC TPU case where I can find it
Look up the Kraken AMS. That is a reasonable case.
Alternatively just look for something like this: http://www.ebay.co.uk/itm/BLACK-HAR...sesPouches&hash=item3a6a2fac16#ht_1887wt_1396
Best thing about this type of case is it doesn't add too much bulk, and is easy to get in and out of your pocket (unlike a silicone/rubber case). And it will actually protect your phone in a drop unlike that case you linked to in your original post. As for your screen... only BIG cases include a plastic layer to completely cover the glass.
Are you just looking for something with raised edges, and then use a screen protector perhaps? (Like the ebay one I showed you).
http://www.amazon.com/Acase-Superle...1HVI/ref=sr_1_9?ie=UTF8&qid=1333169597&sr=8-9
this has been the best case for me so far, its very thin, and has a rubber skin with a hard plastic shell..the kraken, and defender are way to big for me. this case is just the right size its about the same size as a tpu case.
stifler05 said:
Any link for official HTC TPU case where I can find it
Click to expand...
Click to collapse
HTC EVO 3D TPU Case TP C630
Loads available in the UK not so sure about else where. Ebay perhaps, Amazon etc.
Well worth the extra few pounds.
Sent from my HTC EVO 3D X515a using XDA
@Scougar- that case looks good. Nit expensive, will order and try it
@jtgarza3- I know about Acase but the problem is I can't get it in my country(amazon ships books and kindle only) and I cant find it elsewhere. I believe it is the best case
@vervester- thanks mate, will try it
Still can't find a case I like better than the acase superleggra.... Look into that, wonder if there's anywhere you buy it that will ship it to you. its cheap and sounds like what your looking for.
Sent from my PG86100 using xda premium
stifler05 said:
Thanks mate
I found this one, and I´ll go with that one probably
Click to expand...
Click to collapse
My case looks exactly the same and it was £3 from amazon.
IMO the thinnest cases are the back cases ones that doesnt really cover the top and bottom bezel...just the sides and back. BUT if you really want to protect your phone and not get it scratched up over time, you are better off using a TPU type case as the are not too thick and are of softer material and will not rub off any of the black anodized paint. Unlike any hard cases, whether its back only or 2 pieces. Also TPU cases are more absorbent during accidental drop on hard surfaces.
I was running seidio 2pc case hard case w/kick stand with my first 3d and although it had felt inside it eventually rubbed off the pain on the top corners of my phone. The felt inside was very thin and the case is not skin tight so it would move some and the slight movement of the case over time eventually sandpapered some of the paint off. TPU or rubber type cases are more skin tight and is not as abrasive as plastic on painted metal and will not damage the paint so long as you also clean it off from time to time. Some dirt can eventually get in between and the dirt will act as sandpaper. So just consider this when you're buying a case as some of you would probably like to sell your phone later down the road or just want to keep it looking new for a long time.
Finally found ultra thin(slim) case
Whole line is here
http://www.obostore.com/index.php?m..._description=1&categories_id=144&keyword=case
stifler05 said:
Finally found ultra thin(slim) case
Whole line is here
http://www.obostore.com/index.php?m..._description=1&categories_id=144&keyword=case
Click to expand...
Click to collapse
Those thin cases are the exact same thing as the case mate barely there cases. Much cheaper. I got the rock brand and like it a lot. You do lose that boot of protection at top and bottom though.
Some people have complained that these type of cases are a bit loose on the sides. Easy fix is to lightly squeeze the sides inwards... tight fit!
Sent from my Transformer Prime TF201 using xda premium
mozman said:
Those thin cases are the exact same thing as the case mate barely there cases. Much cheaper. I got the rock brand and like it a lot. You do lose that boot of protection at top and bottom though.
Some people have complained that these type of cases are a bit loose on the sides. Easy fix is to lightly squeeze the sides inwards... tight fit!
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
I went tpu so far like how smooth and not bulky it is lol Ditched the kraken and ballistic
Sent from the Reaper
reaper24 said:
I went tpu so far like how smooth and not bulky it is lol Ditched the kraken and ballistic
Sent from the Reaper
Click to expand...
Click to collapse
TPU cases are awesome and super sturdy.
vanessaem said:
TPU cases are awesome and super sturdy.
Click to expand...
Click to collapse
I agree went with a blue one those cheap screen protectors work well if you can put it on without dust .
Sent from the Reaper
yeah but the Evo gets hot sometimes and having those extra layers , scared would mess the phone up because of heat.
tonedinh said:
yeah but the Evo gets hot sometimes and having those extra layers , scared would mess the phone up because of heat.
Click to expand...
Click to collapse
What case you talkin about? Haven't had any heat issues?
gtnote said:
Very thin Case made with TPU and PC comes with a screen protector and about $12 using 10% off coupon code xda,
http://www.kevikev.com/Yoobao-TPU-Silicone-Case-for-Sprint-HTC-EVO-3D-TPUHTCEVO3D.htm
View attachment 1024718
View attachment 1024720
View attachment 1024721
Click to expand...
Click to collapse
I got mine. The case even covers the camera also come with a screen protector which works well if you put it on str8 with no dust.. Tho the one you posted looks like it's for a extended battery.
Cost only 4 dollars 3 shipped
I like this phone, but I find it's too slippery and I am afraid of dropping it. I have a rubber case, but it's too bulky it doesn't go into my pocket very easily.
Does anybody have any alternate ideas about making it sticky while remaining super thin?
( I already tried gaffer tape on the back but that's not sticky enough.)
A TPU case. I personally like the bodyglove line of cases, they're a bit pricey at 20 dollars.
Thanks, are they thinner than standard silicone cases?
shook187 said:
A TPU case. I personally like the bodyglove line of cases, they're a bit pricey at 20 dollars.
Click to expand...
Click to collapse
Either that or baby powder
Definitely get a TPU case... they are slimmer than silicone, yet more solid and have a much snugger fit. I've only used TPU cases on my last three phones.
ronnienyc said:
I like this phone, but I find it's too slippery and I am afraid of dropping it. I have a rubber case, but it's too bulky it doesn't go into my pocket very easily.
Does anybody have any alternate ideas about making it sticky while remaining super thin?
( I already tried gaffer tape on the back but that's not sticky enough.)
Click to expand...
Click to collapse
You can aslo try this it might help
http://shop.flygrip.com/
Alright then, I'll try the TPU case.
*any suggestion as to which brands are best? I see many cases with "TPU" in the title...*
Thanks for the tips.
Just look up tpu cases in Amazon and find one with reviews and a good price I bought one for $7 and it looks cool and seems very durable.
Sent from my EVO using xda premium
Here's a pick of the one I got, barely adds any bulk but great grip.
Sent from my EVO using xda premium
Just ordered one and I will try to keep everyone posted on how it works out. $5.95 hopefully this will work out for those of us that need a more rugged case! http://www.amazon.com/dp/B00E4RV8DS
Your URL doesn't work. I believe http://www.amazon.com/Google-Nexus-Case-Kickstand-Protective/dp/B00E4RV8DS is it?
zephiK said:
Your URL doesn't work. I believe http://www.amazon.com/Google-Nexus-Case-Kickstand-Protective/dp/B00E4RV8DS is it?
Click to expand...
Click to collapse
Yeah thanks that's it! Not sure what went wrong with the URL
msd24200 said:
Just ordered one and I will try to keep everyone posted on how it works out. $5.95 hopefully this will work out for those of us that need a more rugged case! http://www.amazon.com/dp/B00E4RV8DS
Click to expand...
Click to collapse
There another OP for this case, it actually increased to 3x what it originally was. It was 1.99 a week ago.
I'm already using this case, it's amazing for $1.95
agreed i picked up this case on the 9th when it was for pennies. for the price it far exceeds in all areas. OP you will enjoy it for sure.
I bought this case when it was $1.95 on Amazon Prime, and I have to say, I actually feel more secure with the phone in a Spigen. The moko's "rubber" shell is too lose, and the plastic case is too thin and flimsy, much more thinner than a Seido Dilex or an Otterbox Commuter. I think I may just stick with a Neo Hybrid for now and just give away the Moko to someone on XDA.
Thanks for the info everyone
PaisanNYC said:
I bought this case when it was $1.95 on Amazon Prime, and I have to say, I actually feel more secure with the phone in a Spigen. The moko's "rubber" shell is too lose, and the plastic case is too thin and flimsy, much more thinner than a Seido Dilex or an Otterbox Commuter. I think I may just stick with a Neo Hybrid for now and just give away the Moko to someone on XDA.
Click to expand...
Click to collapse
Totally agree with you. I got this case when it first became available. It has a really nice feel and looks great. However the tpu inner/outer shell is very flimsy, especially around the lip of the phone and has the look and feel as though debris could easily enter from the cutouts. The fitament on the phone in the case itself is just OK. The phone does not clip in, rather it slides in from the side making it awkward for some to quickly access. If your looking for something to put on your belt it works.
Sent from my Nexus 6
swiftchancelor said:
Totally agree with you. I got this case when it first became available. It has a really nice feel and looks great. However the tpu inner/outer shell is very flimsy, especially around the lip of the phone and has the look and feel as though debris could easily enter from the cutouts. The fitament on the phone in the case itself is just OK. The phone does not clip in, rather it slides in from the side making it awkward for some to quickly access. If your looking for something to put on your belt it works.
Sent from my Nexus 6
Click to expand...
Click to collapse
It isn't TPU, it is rubber...and the fit on my 32GB N6 is great...only complaint is that the holster doesn't have a locking clip. For a sub-$10USD rugged case you cannot do better. Heck Seidio and Platinum sell the same thing for $60USD for other phones.
Skripka said:
It isn't TPU, it is rubber...and the fit on my 32GB N6 is great...only complaint is that the holster doesn't have a locking clip. For a sub-$10USD rugged case you cannot do better. Heck Seidio and Platinum sell the same thing for $60USD for other phones.
Click to expand...
Click to collapse
The Seidio Dilex line of cases are more sturdy and rugged. And the Seido spring-loaded holsters make it quicker to release the phone off the belt. The Moko is a great sub-$10 case, but it cannot go up against a Seidio/Platinum case.
PaisanNYC said:
The Seidio Dilex line of cases are more sturdy and rugged. And the Seido spring-loaded holsters make it quicker to release the phone off the belt. The Moko is a great sub-$10 case, but it cannot go up against a Seidio/Platinum case.
Click to expand...
Click to collapse
LOL....as an owner of a couple Seidio cases and a Platinum case...the Moko comes from exactly the same Chinese OEM and is made from exactly the same stuff (rubber/plastic). The only difference being Seidio has a metal kickstand.
Skripka said:
LOL....as an owner of a couple Seidio cases and a Platinum case...the Moko comes from exactly the same Chinese OEM and is made from exactly the same stuff (rubber/plastic). The only difference being Seidio has a metal kickstand.
Click to expand...
Click to collapse
Got proof or just heresay?
PaisanNYC said:
Got proof or just heresay?
Click to expand...
Click to collapse
The proof is in that Platinum, Seidio, and Moko have not sued one another for copyright or trademark infringement over the years. They're all that identical in design and quality.
We live in an age where people sue for using rounded corners.
Skripka said:
The proof is in that Platinum, Seidio, and Moko have not sued one another for copyright or trademark infringement over the years. They're all that identical in design and quality.
We live in an age where people sue for using rounded corners.
Click to expand...
Click to collapse
So it's speculation. Just wanted to make it clear. Thanks
Skripka said:
The proof is in that Platinum, Seidio, and Moko have not sued one another for copyright or trademark infringement over the years. They're all that identical in design and quality.
We live in an age where people sue for using rounded corners.
Click to expand...
Click to collapse
Lol, you ain't lying about the lawsuits. I should be getting the i-blason case here in the next couple days, it was actually sub $10 when I scooped it up as well. Looks almost the same minus the holster and the design on the rubber, even the plastic outter clip looks identical. Don't get me wrong, the Moko isn't bad at all.. I'm just a bit ocd about the loose edges and small gaps near the cutouts. I feel like over a short period of time they'll get lose.
Sent from my Nexus 6
I may order one of the poetic revolution cases while they are still cheap. My moko should be her on 12/3
Ordered the orzly tempered glass screen protector a few minutes ago as well
OK the moko came in today and first impressions are really good! Not sure yet how it will hold up but the fit is great. All the buttons feel great! The case actually looks pretty good (granted looks are in the eye of the beholder as they say). The kickstand doesn't seem to bad. For a rugged case, its actually surprisingly slim which may make a lot of people happy.
Now for the bad as others have mentioned pulling the phone out of the holster causes the rubber part of the case to pull away from the phone. Not real bad but it does. The phone slides into the case but its a tight fit.
All in all I paid $5.95 + shipping on Amazon for this case and initial impression is for that price if you need a case it's a great buy. Just noticed the price is now $6.95 so if your looking for a decent cheap case I'd buy it before the price goes up. I'm going to use it until I find a satisfactory higher end case.
I did order a poetic revolution case as well and when it comes in I'll let you all know who it is.
A cautionary tale for those who have or are looking at the Tetded/TETDED slim leather case on eBay or elsewhere. I have had this case for about a month and it has been great - snug, nice leather and best of all a nice slim fit, similar to the Apple leather case for the iPhone. Today I took the case off to kind of just take a look at the phone and wipe away any schmutz and much to my chagrin, noticed some wear marks on the glass (top of the phone). While faint and kind of hard to notice due to the glass being shiny, it has wear marks nonetheless. I sent a message to the seller on eBay who asked for pictures of the wear, which will be tricky to take, like I said, because they are both faint and the glass is shiny.
I like the case a lot and would easily recommend it to someone looking for this style of case, but after noticing this...I don't think a case should leave marks on your phone.
I have a full skin on my pixel. Front and back. Do you think there is enough give in the case to fit over a skin?
fracman said:
I have a full skin on my pixel. Front and back. Do you think there is enough give in the case to fit over a skin?
Click to expand...
Click to collapse
It would be pretty damn tight.
Could you shield the glass with some carefully-cut-out plastic kitchen wrap before putting it in the case? (There's probably a better kind of plastic film to use, but that's the first one that came to mind.)
UnusualSuspect said:
Could you shield the glass with some carefully-cut-out plastic kitchen wrap before putting it in the case? (There's probably a better kind of plastic film to use, but that's the first one that came to mind.)
Click to expand...
Click to collapse
I have a skin on the glass only
Thanks for the warning. I've been eyeing this case. Guess I should stop.
I had an orange version of this case, cleaned it with leather cleaner and the dye came off! I love a nice premium leather case, but this isn't it in my book.
Just sad we cannot get a high quality slim leather case, that isn't a wallet or folds out into a stupid origami swan or something. If the Pixel is selling as well as we are led to believe, I am surprised more folks aren't making them.
mtoomey79 said:
Just sad we cannot get a high quality slim leather case, that isn't a wallet or folds out into a stupid origami swan or something. If the Pixel is selling as well as we are led to believe, I am surprised more folks aren't making them.
Click to expand...
Click to collapse
More likely is that leather cases are not very popular now and they take a lot more production to make compared to a molded case. Less demand, more production costs means less availability.
I have the exact same case, and have had mine on for about a month as well, maybe slightly longer.
Just checked the back of mine and it's fine - totally scratch free and perfect under the case. I can't see how this case would damage the back of the phone as it's backed with a thin layer of foam.
Maybe some crud got stuck in between the case and the back?