Hi,
I have a X10i with BaseBand .54 and I want install XAT CM6FROYO rom, but this rom needs baseband .55. My question is, I can upgrade my X10i for BB .55 or for X10i is a BB .58?
Sorry for my English.
Linktodevil said:
Hi,
I have a X10i with BaseBand .54 and I want install XAT CM6FROYO rom, but this rom needs baseband .55. My question is, I can upgrade my X10i for BB .55 or for X10i is a BB .58?
Sorry for my English.
Click to expand...
Click to collapse
Seen this before again and again
Any rom which requires either BB.55 .54 or. 58 will work with any of these 3 BB's installed
So in otherwords there is no reason to flash a newer .55/.58 as it should work on. 54
Regards
Sent from my X10i using XDA Premium App
hey 2.1.54 does this mean im using baseband 54 ?
If you r looking at your phones settings/about section and the part that says basband version said what u said, then u have .54 baseband.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
OMG what a question.
how to update baseband?what software i need it?
im wondering if its possible to downgrade from .54 to .52 ??????????
Souljaded said:
im wondering if its possible to downgrade from .54 to .52 ??????????
Click to expand...
Click to collapse
Yes, via flashtool.
Hi all,
I was wondering what baseband I should use if Im on A&tt with WolfBreaks Gingerbread Rom? Can I use the .54 Baseband? And I also was wondering if there was a way to strip the baseband from the Xperia Play when it launches on AT&T and we could use it on our X10s?
That Guy Is Here said:
Hi all,
I was wondering what baseband I should use if Im on A&tt with WolfBreaks Gingerbread Rom? Can I use the .54 Baseband? And I also was wondering if there was a way to strip the baseband from the Xperia Play when it launches on AT&T and we could use it on our X10s?
Click to expand...
Click to collapse
To use wolfs pre rooted gingerbread rom...you have to flash the ftf file that come with it in flashtool. It will be baseband .71
And yes, its ok to flash X10i firmware to a X10a. It works flawlessly.
Sent from my X10i using XDA App
Hello i am Running on 2.3.4 KPH is there any better Firmware than the KPH???
The others are all 2.3.3. but dunno if one is maybe better and faster etc. then the KPH 2.3.4 i am from Germany and dunno witch Firmware is best for Europe Regions??
Could you Assist please??
neophyte1983 said:
Hello i am Running on 2.3.4 KPH is there any better Firmware than the KPH???
The others are all 2.3.3. but dunno if one is maybe better and faster etc. then the KPH 2.3.4 i am from Germany and dunno witch Firmware is best for Europe Regions??
Could you Assist please??
Click to expand...
Click to collapse
If I remember correctly , KPB is 2.3.4
neophyte1983 said:
Hello i am Running on 2.3.4 KPH is there any better Firmware than the KPH???
The others are all 2.3.3. but dunno if one is maybe better and faster etc. then the KPH 2.3.4 i am from Germany and dunno witch Firmware is best for Europe Regions??
Could you Assist please??
Click to expand...
Click to collapse
Kpo is very stable and an official release from Samsung, I would use that and I'm from britain
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
If I remember correctly , KPB is 2.3.4
Click to expand...
Click to collapse
Lol... Wat was tht! 2.3.4 isnt JUST kpb.
@topic... I hv used kph fr long and kpn too. Bt idont find much of a difference. However.. If u read thru the forum.. Ull see lots of ppl suggesting kph being best.
P.s. Ive used kpn only with flash x2 nd not on base samsung provided ginger
Sent from my GT-S5830 using XDA App
This is stock kernel and baseband collection.
Hope this will help you who need to flash baseband or revert back to stock kernel, so you dont have to download full ftf firmware.
Instructions:
1. Flash it from flashtool. if you don't have or don't know about flashtool here the thread
2. Put the ftf file you've downloaded to firmware folder under flashtool folder.
3. open flashtool, click flash/electricity image and choose the ftf then flash, put your phone to flash mode (follow instructions on flashtool).
Use it with your own risk, I am not responsible if you brick your device
This is for locked and unlocked bootloader
Link:
3.0.1.A.0.145 Kernel : http://www.mediafire.com/?9ct405pudyxs0x2
3.0.1.A.0.145 Baseband : http://www.mediafire.com/?5njws7b40khh1u3
4.0.1.A.0.283 Kernel : http://www.mediafire.com/download.php?tmc18mtizc298ny
4.0.1.A.0.283 Baseband : http://www.mediafire.com/download.php?a4m08an7ns9vb96
4.0.2.A.0.42 Kernel : http://www.mediafire.com/download.php?6oy03v67ablz875
4.0.2.A.0.42 Baseband (56) : http://www.mediafire.com/download.php?spdxdn6j99fsa3z
4.0.2.A.0.62 Kernel : http://www.mediafire.com/download.php?rp4v14001fj4y4v
Baseband 70 : http://www.mediafire.com/?vonxfycede3doto
Baseband 72 with latest stock Kernel : http://www.mediafire.com/download.php?co62xnqegcclp9s
4.0.2.A.0.62 Baseband (64) : http://www.mediafire.com/download.php?tfd8bdbdrcd4bpq
4.1.B.0.587 kernel [MT11i] : http://www.mediafire.com/?i65i9fkpir4al14
4.1.B.0.587 baseband (77) : http://www.mediafire.com/?f6x66pgbwxw3j8y
4.1.B.0.587 kernel [MT15i] : http://www.mediafire.com/?g4gmfrg0dq9hn7k, thanks to madfysh for the link
If you need anything just tell me on this thread or PM.
Don't forget to press thanks.
All the files here are for MT15i .....
Can you please upload files for MT11i .....
As i know that there is not much diff in both of them in case of kernel or baseband but still if you can upload them seperatly then it will help us a lot .....
Thanks
piku2008 said:
All the files here are for MT15i .....
Can you please upload files for MT11i .....
As i know that there is not much diff in both of them in case of kernel or baseband but still if you can upload them seperatly then it will help us a lot .....
Thanks
Click to expand...
Click to collapse
I dont think there is any different baseband and kernel between neo amd neo v, so you can flash it on neo v as well.
Sent from my MT15i using XDA App
Nice job AIM! I will mark this thread my near future need.
BTW a bit off topic: from your own experience, what baseband/kernel you think the best for signal?
Tks
BlackRatVN said:
Nice job AIM! I will mark this thread my near future need.
BTW a bit off topic: from your own experience, what baseband/kernel you think the best for signal?
Tks
Click to expand...
Click to collapse
Thanks mate
Baseband 56 from fw .42 is good for me in term of battery life but baseband 64 from fw .62 good in term of signal quality and overall quality.
And my best combination is bb 56 and stock .283 kernel.
Fyi, baseband is related to your region, what is good for me doesnt mean its good for you too.
Just give it a try.
Sent from my MT15i using XDA App
Tks, Iwill test kernel 283 with .62 baseband
Sent from my Xperia Neo using Forum Runner
Best combination is .42 baseband + .283 kernel. Epic battery life.
Can i use .283 kernel and then still install a custom Kernel ?
How can you check the version /firmware of your kernel ?
Will the version still be .283 then ?
Im new at this ^^
SleejR123 said:
Can i use .283 kernel and then still install a custom Kernel ?
How can you check the version /firmware of your kernel ?
Will the version still be .283 then ?
Im new at this ^^
Click to expand...
Click to collapse
You can use different baseband and kernel, not same time 2 different kernel.
Ask simply what you want to do and we help.
Etc you can use .283 baseband and .62 kernel
Sent from my MT15i using Tapatalk
Please can you add kernel and baseband of 3.0.1.A.145 ??
It is the only one without the famous gps bug without data traffic.
Please please please
aimcr7 said:
I dont think there is any different baseband and kernel between neo amd neo v, so you can flash it on neo v as well.
Sent from my MT15i using XDA App
Click to expand...
Click to collapse
The hardware on the Neo and Neo V isn't completely the same, Neo and Neo V have a different camera, so I think the kernel could be different for Neo and Neo V as well.
maRRRco89 said:
Please can you add kernel and baseband of 3.0.1.A.145 ??
It is the only one without the famous gps bug without data traffic.
Please please please
Click to expand...
Click to collapse
Okay mate, will be add it.
But give me some time since my PC have been broken.
Sent from my MT15i using XDA App
krabappel2548 said:
The hardware on the Neo and Neo V isn't completely the same, Neo and Neo V have a different camera, so I think the kernel could be different for Neo and Neo V as well.
Click to expand...
Click to collapse
Okay mate, will try to upload it when i have a time. My HDD was broken, i try to regenerate it using HDD regenerator today, i hope it will solve my problem.
Sent from my MT15i using XDA App
taaviu said:
You can use different baseband and kernel, not same time 2 different kernel.
Ask simply what you want to do and we help.
Etc you can use .283 baseband and .62 kernel
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
Well I am using nightElf v9 + v0.85 Tweaked ROM + .64 baseband.
I live in europe and when I enable my data connection I have battery drains.
Ive read in other topics (around here) that going to .283 kernel solves the battery drain issue ?
thanks already !
SleejR123 said:
Well I am using nightElf v9 + v0.85 Tweaked ROM + .64 baseband.
I live in europe and when I enable my data connection I have battery drains.
Ive read in other topics (around here) that going to .283 kernel solves the battery drain issue ?
thanks already !
Click to expand...
Click to collapse
You can try combination BB 56 and .283 kernel. Ive got best battery life with those combination. Let me know if it works for you too.
Sent from my MT15i using XDA App
Today i flashed the 3.0.xxx baseband in my 2.3.4 with 4.0.2.a.0.62 firmware
with bad results, the boot stucks in Sony Ericsson logo, and i had to repair software with seus update .
So, don't flash old 2.3.3 baseband in new 2.3.4 firmwares !!!
maRRRco89 said:
Today i flashed the 3.0.xxx baseband in my 2.3.4 with 4.0.2.a.0.62 firmware
with bad results, the boot stucks in Sony Ericsson logo, and i had to repair software with seus update .
So, don't flash old 2.3.3 baseband in new 2.3.4 firmwares !!!
Click to expand...
Click to collapse
Thanks for the report mate.
Why dont you just flash back to newer bb instead?
Sent from my MT15i using XDA App
Yes, could have been a nice idea
i didn't think to it
Oh my god
perhaps i discovered why the flash has gone bad
i had not debug checked !!!
is it a possible cause?
maRRRco89 said:
Oh my god
perhaps i discovered why the flash has gone bad
i had not debug checked !!!
is it a possible cause?
Click to expand...
Click to collapse
You can't flash it if you not checked USB debugging mode, flashtool will refuse it.