Okay so hope this is the right spot to post this....
My phone about two hours ago was on working fine. At about 30% bat...
I took a nap and now when i plug it in to the charger it will not turn on at all.. only thing that happens is the LED blinks that orangy color over and over...
If i remove the battery and put it back in.. still nothing at all ever comes on the screen.
After removing the battery and while plugged into the charger if i hold the power button it will vibrate once and thats it...
not sure whats happening.
I was on gingeritis 1.0 and everything was great up to this point.
any ideas??
Let is attempt to charge for a while, maybe 2 hours. Then see if you can power up into the bootloader. See if that works.
I had that happen once as well. I just let it sit on the charger for about 15-20 minutes, and it booted up with no problems after that. In my case, it looked like the battery was just completely dead and needed to build up enough juice to last until after it booted up.
FreemanB said:
I had that happen once as well. I just let it sit on the charger for about 15-20 minutes, and it booted up with no problems after that. In my case, it looked like the battery was just completely dead and needed to build up enough juice to last until after it booted up.
Click to expand...
Click to collapse
Yup, ditto.
Sent from my ThunderBolt using XDA App
Questions like this do not belong in the development section.
Please post in the Q&A section.
http://forum.xda-developers.com/forumdisplay.php?f=1103
Wrong section brother.
^_^_^
Ditto, try pulling battery out for 5-10 seconds, put the charger. It will not blink, then it will flash orange blinks let it sit for some 15. Minutes. Remember that TB takes alot of juice to reboot sometimes 5%.
STAY AWAY FROM ALL GINGERBREAD ROMS
My phone got stuck on the white htc screen this morning all of a sudden without any perceivable reason at all. Luckily I was able to restore to a backup.. BUT... It wouldn't install any new roms on my phone anymore for some reason.. they all get stuck on the white htc screen.
My advice.. GB is f&&&ked somewhere deep down.. and which is probably why it isn't officially released yet. Keep off of it if you don't wanna brick your phones.
kriskmk said:
STAY AWAY FROM ALL GINGERBREAD ROMS
My phone got stuck on the white htc screen this morning all of a sudden without any perceivable reason at all. Luckily I was able to restore to a backup.. BUT... It wouldn't install any new roms on my phone anymore for some reason.. they all get stuck on the white htc screen.
My advice.. GB is f&&&ked somewhere deep down.. and which is probably why it isn't officially released yet. Keep off of it if you don't wanna brick your phones.
Click to expand...
Click to collapse
That's a sign of a hardware failure I had a bad touch screen and once it went out it wouldn't boot past the splash, I'm sure it's similar with other hardware failures so it's a bad device not the gingerbread roms
Atleast that's my opinion
>--The Game--<
kriskmk said:
STAY AWAY FROM ALL GINGERBREAD ROMS
My phone got stuck on the white htc screen this morning all of a sudden without any perceivable reason at all. Luckily I was able to restore to a backup.. BUT... It wouldn't install any new roms on my phone anymore for some reason.. they all get stuck on the white htc screen.
My advice.. GB is f&&&ked somewhere deep down.. and which is probably why it isn't officially released yet. Keep off of it if you don't wanna brick your phones.
Click to expand...
Click to collapse
Sounds like you didn't wipe data.
jcase said:
Sounds like you didn't wipe data.
Click to expand...
Click to collapse
But if he flashed Gingeritis, wouldn't the script have done in for him in cwr?
Sent from my ADR6400L using XDA Premium App
I had this happen to just a few ago.
Picked up the phone and screen was off,Normal, I hit power and nothing.
Pulled battery, went bootloaded mode recovery and wiped and loaded bamf.
I have all the roms on my SD now.
Serious now, that was the second time I loaded th3ory.
The first time, I went to uninstall something and when I hit uninstall the button started flickering wild.
I kept mashing uninstall,I got it to switch to the next screen where you hit ok.
Then got a pop up over and over, phone force close sorry.
Pulled battery and went recover and loaded bamf.
So th3ory came out with v4 I thought ok why not.
Then I had the dead phone problem like you are talking about.
I don't want to bash any dev or Rom but I'm not sure about th3ory Rom guys.
I posted because this just happend to me and many post are talking about battery.
I don't think its a battery problem guys
jcase said:
Sounds like you didn't wipe data.
Click to expand...
Click to collapse
Of course I did...and not just once.
Sent from my ADR6400L using XDA App
superchilpil said:
That's a sign of a hardware failure I had a bad touch screen and once it went out it wouldn't boot past the splash, I'm sure it's similar with other hardware failures so it's a bad device not the gingerbread roms
Atleast that's my opinion
>--The Game--<
Click to expand...
Click to collapse
If it was a hardware failure it wouldn't have worked with my froyo backup.
Sent from my ADR6400L using XDA App
tanium said:
I had this happen to just a few ago.
Picked up the phone and screen was off,Normal, I hit power and nothing.
Pulled battery, went bootloaded mode recovery and wiped and loaded bamf.
I have all the roms on my SD now.
Serious now, that was the second time I loaded th3ory.
The first time, I went to uninstall something and when I hit uninstall the button started flickering wild.
I kept mashing uninstall,I got it to switch to the next screen where you hit ok.
Then got a pop up over and over, phone force close sorry.
Pulled battery and went recover and loaded bamf.
So th3ory came out with v4 I thought ok why not.
Then I had the dead phone problem like you are talking about.
I don't want to bash any dev or Rom but I'm not sure about th3ory Rom guys.
I posted because this just happend to me and many post are talking about battery.
I don't think its a battery problem guys
Click to expand...
Click to collapse
For one all GB ROM have the data load issue when trying to uninstall. Second, if it was a issue, more people would have reported it.
Titanium Backup, a App you use in every ROM, CPU setting to low, not wipe to save some time, a multitude of things could cause you a issue.
In my defense, if it were my ROM, it would be heard.
Sent from my ADR6400L using XDA App
kriskmk said:
STAY AWAY FROM ALL GINGERBREAD ROMS
My phone got stuck on the white htc screen this morning all of a sudden without any perceivable reason at all. Luckily I was able to restore to a backup.. BUT... It wouldn't install any new roms on my phone anymore for some reason.. they all get stuck on the white htc screen.
My advice.. GB is f&&&ked somewhere deep down.. and which is probably why it isn't officially released yet. Keep off of it if you don't wanna brick your phones.
Click to expand...
Click to collapse
Dude. Stop bashing the GB dev Rom. You run the risk of bricking with any Rom. Plenty of people are using GB and the 2.5 radio with no problems, myself included. If it docent work right on your phone then put something else on it. Not every phone is going to react the exact same way to a flash. Your always going to have those few exceptions, even with OTA's.
Sent from my Rooted Remixed BAMF URBaN Thunderbolt.
kriskmk said:
STAY AWAY FROM ALL GINGERBREAD ROMS
My phone got stuck on the white htc screen this morning all of a sudden without any perceivable reason at all. Luckily I was able to restore to a backup.. BUT... It wouldn't install any new roms on my phone anymore for some reason.. they all get stuck on the white htc screen.
My advice.. GB is f&&&ked somewhere deep down.. and which is probably why it isn't officially released yet. Keep off of it if you don't wanna brick your phones.
Click to expand...
Click to collapse
Not good advice at all.
Check your charging cable! I just had a bad cable the other day and my phone was doing the same exact thing... light bliking on and off. I found if I plugged it in and then lightly pulled it half way out the orange light stayed solid, but it took some work.
Before you start freaking out, just try another cable... hopefully its not the connectors inside your phone.
RootandBoot said:
Dude. Stop bashing the GB dev Rom. You run the risk of bricking with any Rom. Plenty of people are using GB and the 2.5 radio with no problems, myself included. If it docent work right on your phone then put something else on it. Not every phone is going to react the exact same way to a flash. Your always going to have those few exceptions, even with OTA's.
Sent from my Rooted Remixed BAMF URBaN Thunderbolt.
Click to expand...
Click to collapse
no need to get your panties in a bunch.. My advice is only worth whatever it is.. (which may be nothing too).. and I am not thrusting it on anyone to follow it.
Where the hell do you figure I am bashing devs??? The more time one spends on xda the more you come across these noob "police figures" who go around poking into unrelated stuff getting all worked up for nothing.. Like I said.. it is probably something to do with how the alpha gingerbread works at the core level which is causing all these problems.. it has nothing to do with devs.. and look around you.. plenty of people are reporting the same. I didn't see anyone complaining when devs reported the same with the earlier GB and asked people to stay away from it. Were they doing it so that they can bash other devs who had their GB roms out before they did? I don't think so. So quit shooting from your hips and move along.
If the led is blinking it means the phone is totally dead. If you let it sit the light will eventually become solid and be fine
Sent from my ThunderBolt using XDA Premium App
Related
I have a very unusual problem that i just googled and have not come across. I woke up this morning and found that my display wasn't turning on, as if the phone was off. I had encountered this problem before and a battery pull worked fine. Im on MR2 btw... but this issue is different, my diplay is completely dead, D-E-D, dead... after the battery pull i held the power button to start up again but all i got was the vibration on start up, no lcd screen response.
i know the issue is the lcd screen and i can replace it myself, if it had just been that. i have the total protection plan set up and can replace it, but my only issue is that the TB is rooted. upon fixing it they will realize it once the CM7 animation comes up. i need advice on how to handle this situation.
i cant bootload neither, display is completely off... i can hear sound going on so i know its on. Help please!
i had CM7 rc1.2, mr2 radio, clocked up to 1.6.. i was on bamf for a while but switched to cm7 2 days ago.
You cant boot into recovery mode? Try booting into hboot see if the screen works. If it doesnt just take it to VZW and when they fix it be like "What the heck! You guys rooted my phone?!"
alluzzion2o9 said:
I have a very unusual problem that i just googled and have not come across. I woke up this morning and found that my display wasn't turning on, as if the phone was off. I had encountered this problem before and a battery pull worked fine. Im on MR2 btw... but this issue is different, my diplay is completely dead, D-E-D, dead... after the battery pull i held the power button to start up again but all i got was the vibration on start up, no lcd screen response.
i know the issue is the lcd screen and i can replace it myself, if it had just been that. i have the total protection plan set up and can replace it, but my only issue is that the TB is rooted. upon fixing it they will realize it once the CM7 animation comes up. i need advice on how to handle this situation.
i cant bootload neither, display is completely off... i can hear sound going on so i know its on. Help please!
i had CM7 rc1.2, mr2 radio, clocked up to 1.6.. i was on bamf for a while but switched to cm7 2 days ago.
Click to expand...
Click to collapse
Have you tried running a RUU (ROM update utility) to return your phone to stock? Download one of the .exe RUU's (not the zip) to your computer from this page http://dougpiston.com/ThunderBolt/RUU/ and run it from your computer with your phone plugged in and turned on. With any luck it will return your phone to stock.
i cannot multi quote for $hit, anyways no i cannot get into bootloader because my display wouldn't boot up... but out of sheer luck i finally got it to work!!! and heres what i found! the screen has water damage! then i remembered this morning before getting my phone i tipped over a cup of tea my son left there. im lucky the phone even boots up! i guess facing the phone downwards saved my phone but not the screen... ill hit up VWM and see what they have to say.
nucher said:
Have you tried running a RUU (ROM update utility) to return your phone to stock? Download one of the .exe RUU's (not the zip) to your computer from this page http://dougpiston.com/ThunderBolt/RUU/ and run it from your computer with your phone plugged in and turned on. With any luck it will return your phone to stock.
Click to expand...
Click to collapse
does it matter which one i pick? of the RUU i mean?
[edit]
nevermind i got it, the process seems similar to updating touchpro2, half way through updating.. thanks man! although i got my phone working im going to be bothered with the watered down screen. i can simply open it up and clean it but that'll waste my total protection plan i have with VWM =P
alluzzion2o9 said:
i cannot multi quote for $hit, anyways no i cannot get into bootloader because my display wouldn't boot up... but out of sheer luck i finally got it to work!!! and heres what i found! the screen has water damage! then i remembered this morning before getting my phone i tipped over a cup of tea my son left there. im lucky the phone even boots up! i guess facing the phone downwards saved my phone but not the screen... ill hit up VWM and see what they have to say.
does it matter which one i pick? of the RUU i mean?
[edit]
nevermind i got it, the process seems similar to updating touchpro2, half way through updating.. thanks man! although i got my phone working im going to be bothered with the watered down screen. i can simply open it up and clean it but that'll waste my total protection plan i have with VWM =P
Click to expand...
Click to collapse
Glad you were able to get the RUU to work. I didn't specify one RUU because I figured you would use any one of them just to get your phone to stock, then you can take it to Verizon or mail it to asurion for replacement.
nucher said:
Glad you were able to get the RUU to work. I didn't specify one RUU because I figured you would use any one of them just to get your phone to stock, then you can take it to Verizon or mail it to asurion for replacement.
Click to expand...
Click to collapse
ye i already set up the order... cost $99 in deductables or some $hit... hopefuly it will be here tues/wednes.. thanks a whole lot for the help
alluzzion2o9 said:
ye i already set up the order... cost $99 in deductables or some $hit... hopefuly it will be here tues/wednes.. thanks a whole lot for the help
Click to expand...
Click to collapse
You're welcome. When you get the new phone don't hesitate to put CM 7 back on after you're rooted. I feel its they most flexible and up to date ROM you can put on an Android phone.
nucher said:
You're welcome. When you get the new phone don't hesitate to put CM 7 back on after you're rooted. I feel its they most flexible and up to date ROM you can put on an Android phone.
Click to expand...
Click to collapse
will come in tomorrow, i have 15 days to mail my damaged one or its 300 ;P. CM has always been my fav. its super fast. my favorite part is how fast booting up can be, unlike bamf sense 3.0. only problem i had with cm7 was that when it rings it rings once.. and when i get a voicemail notification it goes ape $hit.
other than that its still my fav.
alluzzion2o9 said:
will come in tomorrow, i have 15 days to mail my damaged one or its 300 ;P. CM has always been my fav. its super fast. my favorite part is how fast booting up can be, unlike bamf sense 3.0. only problem i had with cm7 was that when it rings it rings once.. and when i get a voicemail notification it goes ape $hit.
other than that its still my fav.
Click to expand...
Click to collapse
I had the same problem with the phone only ringing once, I changed the ringtone from Digital Phone to Bell Phone and that solved my problem. I read that certain ringtones don't work properly with CM7 and there is fix in the next update.
Im really trying to figure out what the chances of permanant damage being done by installing cm7. It was extremly hard to get my touchpad and to lose it would be horrid. My question is has there been any confirmed bricks from installing cm7? If theres even one i will wait till its out of alpha cant break my tp.
If I'm not mistaken, webos doctor makes that nearly impossible.
edit: reboot was successful after a few tries
Houston, we have a problem.
I installed CM7 last night. Restored all my apps from phone and got it all set up. Rebooted a few times and it was working flawless. Plugged it into the charger and went to sleep.
Today, the device is dead.
Perhaps it's completely frozen, idk.
Holding power and home for 30 seconds didnt reboot it?
Sent from my PG06100 using Tapatalk
crump84 said:
Holding power and home for 30 seconds didnt reboot it?
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
Hmmm, it didn't work the 1st couple times. Now, it did
Well, w/e, it finally worked haha. Thanks. I had given it up for the time being lol.
There is a guy who has broken his Touchpad while installing CM. The Touchpad didn't had enough battery for completing the whole process, and it is just brick now. The guy made a post on XDA I don't remember where.
lancelot54 said:
There is a guy who has broken his Touchpad while installing CM. The Touchpad didn't had enough battery for completing the whole process, and it is just brick now. The guy made a post on XDA I don't remember where.
Click to expand...
Click to collapse
If it's the same one I saw, he followed it up by saying that holding power+menu brought it back after a charge.
Bricking requires overwriting something in partitions 1-12, which is let's just say difficult to do accidentally with cm's kernel.
Hello there. I´m worried because my Evo 3D CDMA won´t boot or charge at all. The red light is not turning on. All happened apparently with no reason, I left the phone there a few minutes, then it was dead. Maybe if I tell what I did before can help...
I had installed a few minutes ago the Virus ROM 3.0, I flash roms almost every 3 days, so I´m used to it. So, it worked fine after installation. I began to play a few games, when the battery died. I conected it to the charger, waited a few minutes and turned it on again (still plugged to the charger), it started normally. Then I had to answer a phone call, when I got back, the phone was dead!! "Maybe the charger got disconected" I thought. But the charger was fine, I tried many different chargers and nothing.
The red light is not turning on.
I´ve tried many different buttons combinations (camera+power), etc. I can´t get into fastboot (power+volume down). I´m S-ON HBOOt 1.5. So there is no CWM. I have to use windows CMD every time I need to flash Something.
Can this be a battery issue (considering that when the phone died it had about 3% of battery), or is it a fried motherboard, perhaps? It had happened before, but I removed the batttery for a few minutes and It worked.
But I´m scared because the phone is brand new, and it has less of two months of average using. And don´t tell me to go to Sprint service since I´m in El Salvador and I got the phone at eBay.
Any help would be appreciated. Thanks.
My fiest EVO 3d did this, the guy told me that it was a lemon. I got a instant replacement, not sure if its in the discovered mode by a dev,
Pull the battery, unplug charger, then battery back in and try turn on.
Sent from my PG86100 using XDA App
mariosaigon said:
Hello there. I´m worried because my Evo 3D CDMA won´t boot or charge at all. The red light is not turning on. All happened apparently with no reason, I left the phone there a few minutes, then it was dead. Maybe if I tell what I did before can help...
I had installed a few minutes ago the Virus ROM 3.0, I flash roms almost every 3 days, so I´m used to it. So, it worked fine after installation. I began to play a few games, when the battery died. I conected it to the charger, waited a few minutes and turned it on again (still plugged to the charger), it started normally. Then I had to answer a phone call, when I got back, the phone was dead!! "Maybe the charger got disconected" I thought. But the charger was fine, I tried many different chargers and nothing.
The red light is not turning on.
I´ve tried many different buttons combinations (camera+power), etc. I can´t get into fastboot (power+volume down). I´m S-ON HBOOt 1.5. So there is no CWM. I have to use windows CMD every time I need to flash Something.
Can this be a battery issue (considering that when the phone died it had about 3% of battery), or is it a fried motherboard, perhaps? It had happened before, but I removed the batttery for a few minutes and It worked.
But I´m scared because the phone is brand new, and it has less of two months of average using. And don´t tell me to go to Sprint service since I´m in El Salvador and I got the phone at eBay.
Any help would be appreciated. Thanks.
Click to expand...
Click to collapse
I saw some tread about rom manager app causing sudden death.did you have it?what kernel were you on?
Sent from my HTC EVO 3D X515m using xda premium
josephnero said:
I saw some tread about rom manager app causing sudden death.did you have it?what kernel were you on?
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
No, I didn´t have that app, and I had Chad Goodman´s Anthrax Kernel V2...
mariosaigon said:
No, I didn´t have that app, and I had Chad Goodman´s Anthrax Kernel V2...
Click to expand...
Click to collapse
Might be the battery man... I would swap to another battery.
reaper24 said:
Might be the battery man... I would swap to another battery.
Click to expand...
Click to collapse
I hope it is only the battery, because it´s not expensive... But do you think I should try charging the battery manually? You know, some people say it´s a good way to restore a battery,,,,
maybe the battery or bricked phone
reaper24 said:
Might be the battery man... I would swap to another battery.
Click to expand...
Click to collapse
How did you activate it? Did you download a GSM version of the rom or a CDMA one.....
reaper24 said:
How did you activate it? Did you download a GSM version of the rom or a CDMA one.....
Click to expand...
Click to collapse
Actually we have CDMA in El Salvador too... The rom installed fine, and was running fine, the phone died while.. let me remember... Ah, I was installing a Chainfire 3D plugin, but I had never problems with Chainfire in any rom before, so the big deal is,
1) Is it a faulty battery? I remember once, the battery died the red light started blinking. Maybe the battery is bad.
2) Is it hard bricked? or soft bricked?
3) If it is bricked, is there a way to restore it?
mariosaigon said:
Actually we have CDMA in El Salvador too... The rom installed fine, and was running fine, the phone died while.. let me remember... Ah, I was installing a Chainfire 3D plugin, but I had never problems with Chainfire in any rom before, so the big deal is,
1) Is it a faulty battery? I remember once, the battery died the red light started blinking. Maybe the battery is bad.
2) Is it hard bricked? or soft bricked?
3) If it is bricked, is there a way to restore it?
Click to expand...
Click to collapse
I doubt it was bricked due to the phone wouldn't boot at all when you got it.. Did you update the radios or software when you got it? I know the latest software for CDMA is 2.17 virus R75 to R80 3.0 eternity is based and built off it...
My guess is the battery is shot I would try that you can find them cheap..... So the red light doesn't come on at all when you plug it in with the battery in the phone..?
You would really have to spank a phone to brick it... If the hardware isn't broken you should be able to restore a bricked phone... That takes skill and alot of reading....
What other chargers did you try? Could be the usb cord is bad or the charger... Battery could be no good. Last thing it could be is a bad charger port... Maybe..
reaper24 said:
I doubt it was bricked due to the phone wouldn't boot at all when you got it.. Did you update the radios or software when you got it? I know the latest software for CDMA is 2.17 virus R75 to R80 3.0 eternity is based and built off it...
My guess is the battery is shot I would try that you can find them cheap..... So the red light doesn't come on at all when you plug it in with the battery in the phone..?
You would really have to spank a phone to brick it... If the hardware isn't broken you should be able to restore a bricked phone... That takes skill and alot of reading....
Click to expand...
Click to collapse
I got the phone brand new. I have
1) Unlocked bootloaders via HTC metod
2) Installed tons of roms (I`m a flashaholic)
3) Never installed an incorrect ROM or kernel.
And yes, no light at all when I plug the phone to the charger. it`s totally dead.
UPDATE
I have discovered something about a RUU. check it out:
"This is a link to the Evo stock RUU and a description of what it does. It isn’t anything that wasn’t available already online, I just like providing a central location to get everything.
What is this?
RUU is the way that our phones are flashed at the factory. It flashes all the factory images on to your phone.
What can I do with it?
You can use this to “unroot” your phone before sending it in for warranty work.
Use it to flash back to stock if you are having any random issues on your phone that you can’t fix.
It can 100% flash your phone back to how it came from the factory. As long as your phone turns on at all (even if it’s not booting) then you should be able to save it by using this.
This means your phone is virtually unbrickable, unless you go flashing a radio or SPL or something that you shouldn’t.
How do I use it?
Download the file below and run the exe.
What else do I need to know?
This will set your phone back to 100% bone stock.
You don’t need to run this unless you are trying to return your phone to stock. You won’t get anything special from running it."
IF I RUN THIS PROGRAM, IS IT POSSIBLE I CAN GET MY PHONE BACK TO LIFE?
mariosaigon said:
I got the phone brand new. I have
1) Unlocked bootloaders via HTC metod
2) Installed tons of roms (I`m a flashaholic)
3) Never installed an incorrect ROM or kernel.
And yes, no light at all when I plug the phone to the charger. it`s totally dead.
UPDATE
I have discovered something about a RUU. check it out:
"This is a link to the Evo stock RUU and a description of what it does. It isn’t anything that wasn’t available already online, I just like providing a central location to get everything.
What is this?
RUU is the way that our phones are flashed at the factory. It flashes all the factory images on to your phone.
What can I do with it?
You can use this to “unroot” your phone before sending it in for warranty work.
Use it to flash back to stock if you are having any random issues on your phone that you can’t fix.
It can 100% flash your phone back to how it came from the factory. As long as your phone turns on at all (even if it’s not booting) then you should be able to save it by using this.
This means your phone is virtually unbrickable, unless you go flashing a radio or SPL or something that you shouldn’t.
How do I use it?
Download the file below and run the exe.
What else do I need to know?
This will set your phone back to 100% bone stock.
You don’t need to run this unless you are trying to return your phone to stock. You won’t get anything special from running it."
IF I RUN THIS PROGRAM, IS IT POSSIBLE I CAN GET MY PHONE BACK TO LIFE?
Click to expand...
Click to collapse
Your phone would have to be on like in Hboot or in a rom....And need to fastboot flash stock recovery... or make it a zip file to do....
Also you would have to relock your phone.. Once it was relocked you could run this...
I am only going off what I have seen haven't had to relock my phone to throw stock on it... I have seen some guides in the dev section to do it.. But the phone has to be on to get the sucker to work,,,,
My guess is the battery is no good... If it's brand new I don't know why the charger port would be bad in it... I would try another battery first man...
reaper24 said:
Your phone would have to be on like in Hboot or in a rom....And need to fastboot flash stock recovery... or make it a zip file to do....
Also you would have to relock your phone.. Once it was relocked you could run this...
I am only going off what I have seen haven't had to relock my phone to throw stock on it... I have seen some guides in the dev section to do it.. But the phone has to be on to get the sucker to work,,,,
My guess is the battery is no good... If it's brand new I don't know why the charger port would be bad in it... I would try another battery first man...
Click to expand...
Click to collapse
OK, before I commit suicide I will try to get a new battery (I`ll have to buy it at eBay, since no once else has this phone here) That should be the only solution. Thanks for you time. I´ll let you know what happened as soon the battery comes (a month, maybe)
mariosaigon said:
OK, before I commit suicide I will try to get a new battery (I`ll have to buy it at eBay, since no once else has this phone here) That should be the only solution. Thanks for you time. I´ll let you know what happened as soon the battery comes (a month, maybe)
Click to expand...
Click to collapse
Reallly that sucks I would look around do you guys have a sprint store....?
What do the battery contacts look like on the battery ? Still a goldish color or do they have some black burns lines to them? Try to take a eraser on a pencil and wipe the contacts down and plug the battery back in talking about the battery don't use it on the prongs where the battery plugs in at .....
Worth a shot man lol I have done this in the past......
reaper24 said:
Reallly that sucks I would look around do you guys have a sprint store....?
What do the battery contacts look like on the battery ? Still a goldish color or do they have some black burns lines to them? Try to take a eraser on a pencil and wipe the contacts down and plug the battery back in talking about the battery don't use it on the prongs where the battery plugs in at .....
Worth a shot man lol I have done this in the past......
Click to expand...
Click to collapse
haha, it`s just that it`s so stressing having a $340 brick. I tried the eraser wiping trick but It didn`t work. Maybe I`ll have a friend manually charging the battery.
I´m going to sleep for now.
Thanks again
mariosaigon said:
haha, it`s just that it`s so stressing having a $340 brick. I tried the eraser wiping trick but It didn`t work. Maybe I`ll have a friend manually charging the battery.
I´m going to sleep for now.
Thanks again
Click to expand...
Click to collapse
I know the feeling lol That sucks,,,, Hope it works out for ya man..
Happened to me before. Try leaving it on charge for 8 hrs or so and remove the battery and replace every so often. BTW I got it on virus eternity as well. Also, I would get an extended battery to kill two birds with one stone if the previous method doesn't work.
Sent from my Quad core thingamabober with dat XDA Premium
Hello guys, I'm experimenting the same issue! It was working like a charm, then I left without simcard in airplane mode, but with wifi on.
When out from wifi coverage, it turned off (maybe because of the battery drain) and can't bring it back to life!
This is just incredible, I can't believe there is no way to wake up it.
I'm trying to charge with its charger, with PC connection and nothing happens: red light for a little while and everything off again after a couple of seconds ... I'm getting nervous :-(
I don't think the phone is bricked or a bad battery. When you plug the charger in, turn the light off in the room and see if the phone charging led is very dim. Sometimes when my battery is very low and I put it in the charger it does this. The other scenario is that the phone may be in download mode which I doubt. If it is then you can follow the last steps from the hboot 1.50 downgrade guide.
Sent from my PG86100 using xda premium
I just skimmed the posts so sorry if I missed it, but...
Have you tried "adb reboot recovery" just to see what happens?
For the last two days my phone has been anything off at random... nothing has been changed... I'm on the cm9 nightly from the two days ago... this is the thing tho... If I gentely tap the phone it will shut off or shake it... so I figured maybe after time the batter is lose... but it also is turning off if it sits completely still...unless its playing music. It has not turned off since Round 8 ad I have just had it playing music this full time ...any ideas??
I already did a full wipe and re install and when I get home I'm going to Oden back to stock and redo everything.
ipeench said:
For the last two days my phone has been anything off at random... nothing has been changed... I'm on the cm9 nightly from the two days ago... this is the thing tho... If I gentely tap the phone it will shut off or shake it... so I figured maybe after time the batter is lose... but it also is turning off if it sits completely still...unless its playing music. It has not turned off since Round 8 ad I have just had it playing music this full time ...any ideas??
I already did a full wipe and re install and when I get home I'm going to Oden back to stock and redo everything.
Click to expand...
Click to collapse
My only suggestion at this point is odin back to stock 2.1.
Unfortunately this sounds like symptoms of hardware failure. I had a phone (cliq) which would do the exact thing as you described...the phone would vibrate shut off and reboot unexpectedly. I would open the physical keyboard and it would also shut off...this is totally hardware related from my understanding. But that is the worst case scenario.
Hopefully it is a software related issue in your case. Not much else i can say.
Sent from my Galaxy Nexus using XDA
Overclocked? Voltages changed at all from default? If you have anything set in voltage control or setcpu, get rid of them and try it. You could also try booting into recovery and see if you can reproduce the problem. That should also help determine if it is software or hardware related.
If the phone is plugged in it does not seem to reboot. i have not had time to mess with it i will check it out this weekend. Weird because it only seems to be doing this at work? I have not had it restart on me at all while at home.
Also if i have the music playing it will not turn off. This weekend im going to oden back to stock and see how it goes. otherwise gonna try to deal with it long enough till the gs3 comes out, ha.
ipeench said:
If the phone is plugged in it does not seem to reboot. i have not had time to mess with it i will check it out this weekend. Weird because it only seems to be doing this at work? I have not had it restart on me at all while at home.
Also if i have the music playing it will not turn off. This weekend im going to oden back to stock and see how it goes. otherwise gonna try to deal with it long enough till the gs3 comes out, ha.
Click to expand...
Click to collapse
You ever find a solution, I have a vibrant with the same problems. probably dropped mine too much lol
drago10029 said:
You ever find a solution, I have a vibrant with the same problems. probably dropped mine too much lol
Click to expand...
Click to collapse
hey i know its been a while but i havent been on here at all. Never found a solution for it but for some reason it doesnt turn off random anymore
ipeench said:
hey i know its been a while but i havent been on here at all. Never found a solution for it but for some reason it doesnt turn off random anymore
Click to expand...
Click to collapse
thanks for the response. and I found my problem already too, I had a bad power ribbon inside the phone that was torn.
What's up Xda? I have a question the top of my EVOLTE's screen is messing up. Just randomly right now. What I mean by messing up is that my notification bar becomes non responsive. At times it'll even slightly drop down maybe a quarter of the way down the screen without me touching it at all. Keep in mind it's just randomly right now not while I'm running certain apps or anything just random.
I am running cm10 stable and I did the pointer location grid and it showed me that no response was being read in that area.
Now keep in mind evolte is in prestine condition. No water damage or drops at all this just started out of nowhere. Anyone else having issues? If so did you do anything to solve it?
I'm gonna take it to sprint tomorrow, but gotta restore it back to factory first. I was just hoping there was another way. My sprint store reps and techs don't seem to know anything. They just give u a new one.
I also ran into this problem with my old evo 4g, but there was rain involved with that.
Sent from my EVO using xda premium
Why don't you flash sense rom first.
Just to see if it works, before going to sprint.
Sent from my lair.
I am having the same problem!!!!! i thought it was just me, my notification bar doesnt respond, when I try to touch anything at the top, it doesnt respond, when I lock the screen, I could touch the screen and the ring will not move. I have searched the forums for a reason and havent been able to seen anyone with the same issue that resolved it..other than taking it back to the sprint store and getting another phone...I am rooted too, so I am concerned about returning the phone and having an issue, any suggestions??
demass430 said:
What's up Xda? I have a question the top of my EVOLTE's screen is messing up. Just randomly right now. What I mean by messing up is that my notification bar becomes non responsive. At times it'll even slightly drop down maybe a quarter of the way down the screen without me touching it at all. Keep in mind it's just randomly right now not while I'm running certain apps or anything just random.
I am running cm10 stable and I did the pointer location grid and it showed me that no response was being read in that area.
Now keep in mind evolte is in prestine condition. No water damage or drops at all this just started out of nowhere. Anyone else having issues? If so did you do anything to solve it?
I'm gonna take it to sprint tomorrow, but gotta restore it back to factory first. I was just hoping there was another way. My sprint store reps and techs don't seem to know anything. They just give u a new one.
I also ran into this problem with my old evo 4g, but there was rain involved with that.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
update
I took the phone in to the sprint store, they said it was nothing that they could do and ordered another phone for me...
nikiva101 said:
update
I took the phone in to the sprint store, they said it was nothing that they could do and ordered another phone for me...
Click to expand...
Click to collapse
Did you take it while on cm10? I wanna take mine so they can also fix my screen and battery but I'm afraid theyll say something cuz of this. Don't really wanna waste my time relocking boot loader and going to stock just so they can fix hardware.
Sent from my EVO using xda premium
drmclove69 said:
Did you take it while on cm10? I wanna take mine so they can also fix my screen and battery but I'm afraid theyll say something cuz of this. Don't really wanna waste my time relocking boot loader and going to stock just so they can fix hardware.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I don't recommended taking it to the sprint store running cm10 I would flash a stock ROM first. Idk about yours, but back in the day I took my og evo tho the sprint store and they just handed it back to me because my boot animation was different.
As far as my screen issue goes I think it had something to do with an app I had. I had the GBA emulator and whenever it was running it kept the icon on the notification bar. Once I uninstalled it I haven't had the problem since. Still its only been about 19hrs, but still nothing. Hopefully it doesn't happen anymore because sprint in my area sucks.
Sent from my EVO using xda premium
Definitely sounds like a bad digitizer
This just started happening to me a couple of days ago! I'm running MeanROM, i have the screen randomly hitting buttons or not responding but if I turn the screen off/on it responds properly for a few minutes or so before screwing up again. I'm going to try doing a fresh install now.
Edit:
So, I did a fresh install of Stock with Goodies and installed updated Liberty kernel and haven't had any issues for the past 24 hours.
The same thing happened with my OG evo. Dealt with it for over a year until o got this phone. I hope it doesn't do the same thing.
drmclove69 said:
Did you take it while on cm10? I wanna take mine so they can also fix my screen and battery but I'm afraid theyll say something cuz of this. Don't really wanna waste my time relocking boot loader and going to stock just so they can fix hardware.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I reset it to factory settings, however, I noticed the superuser app was there. But no, they didnt say anything to me about it, truthfully, they couldnt do much bc the touch screen wasnt responding very well.
The digitizer is going bad, youll have to get it replaced, happened to my forst evo lte
Sent from my EVO using xda app-developers app