want chinese natural handwriting recognition, but don't have $1000 for a wacom cintiq graphics tablet? google to the rescue. This is another one of those "why didn't I think of it before?" things whose answer a couple years ago was simply because it wasn't possible nor practical.
I know, microsoft pocket pc has had the Transcriber function for over 10yrs, but the english version couldn't recognize chinese, and the asian ime cabs, well, the largest ones i could find had writing surfaces of about a square centimeter, try using that with a stylus! Almost as frustrating as using a regular wacom on a Windows onscreen Handwriting Recognition drawing pad, that is if you can manage to get it installed on windows.
Requirement:
1. Android Tablet or phone.
2. free gPen writing program from android market, plus Google PinYin IME,
3. Instant Message program of your choice
4. WiFi/internet
Maybe I couldn't find the answer because I can't write much chinese, don't use IM much, and until I got the 7" android tablet, only had the 1cm IME on my WinMo phone.
The free android market SCUT gPen program on the tablet gives you a 4"x4" writing area, can toggle to full screen if you like, and has very fast and accurate writing recognition. I'm using it with the Hanping Chinese Dictionary for offline chinese learning
As for IM, i tried skype (too big), Evernote(60mb limit), DropBox(no IM), Fring(no pc, huh?), YahooMessenger(delay/offline issues), LiveMessenger(delay/offline issues), finally settling with Palringo, which works pretty fast on both android and PC. When I finish a sentence on my tablet, I right click on PC to copy to clipboard, and paste whereever i want.
So, my current setup involves, Palringo IM(free), 7"dellStreak(refurb under $100-$200), gPen (free), and Wifi. I suppose the cheaper ePad ($70 Android ipad on ebay) would work too... hell, even if only using my HD2, this combo is still way better than any PenPower or Wacom Graphics Tablet out there just for chinese handwriting.
I'm still a noob with regards to android and IM in general, since I'm still dualbooting the HD2 (90% on WM6.5). So here're my questions:
1. Anyone know of an easier IM program to copy/paste the writing over WiFi?
2. How well do those ebay $2-$20 capacitive pen work for writing? (are they all created equal?) (if anyone has any experience of it on the Streak7 or Samsung Tab?)
3. Recommendation for other drawing programs that'll work over wifi/IM ?
Hanping Chinese Dictionary Pro now has Chinese handwriting recognition built-in.
atlaswing said:
... So here're my questions:
1. Anyone know of an easier IM program to copy/paste the writing over WiFi?
...
3. Recommendation for other drawing programs that'll work over wifi/IM and for chinese handwriting?
Click to expand...
Click to collapse
... bump ...
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums
Moving to Q&A
Problem solved (?)
This is an interesting topic that had until now escaped my attention. I will risk a scold.
Maybe we can use this:
https://play.google.com/store/apps/details?id=net.teamprof.WifiHandwritePadPro
(Better use unified remote as described in edit2, below in this same post)
This program uses your android device as input. It does not recognize characters, it doesn't serve as drawing pad. I just gets characters from your android device and sends them to your PC. It is up to you to get a chinese input for your android, first, so you can use this software for chinese.
wifi handwrite pad uses a propietary program to link to windows and linux. This eliminates the need of IM and one copy paste in your scheme.
EDIT:
There are several chinese ime. For instance, sogou. It can recognize drawings into chinese characters, a la pleco. It is free. Pair with wifi handwrite pad your favorite pc-mobile input link and you have a character recognizer in your android powered device
Heck, I wish this existed 2 years ago. hahaha.
EDIT2:
Maybe you will want to try Unified Remote for android instead of the other app. Because it is cheaper, first. It also supports many other functions. This latter advantage might have a 5 minute configuration penalty (learning curve) attached. Works like a charm too
EDIT3:
You can use Google chinese input (IME), since it is english friendly. Sougou is far better, but the interface is in 中文 only
I know this is an old thread but I am interested in something that can do this now. I've been buying expensive devices to input Chinese characters for my parents but they keep breaking. We have extra Android tablets and would be very interested in a way to provide input from Android in the form of Chinese characters onto their Windows 10 PC.
just want to help all Chinese linux users with handwriting input as a redemption for my using everything open source all these years. Download KDE Connect at both ends. Find a handwriting app and install in your android phone. Use remote input via your phone.
Related
Hey guys, anybody using a bluetooth keyboard with their StarTrk? Any recommendations?
I'm going away for a few days next week and would rather keep track of my emails using emoze and a BT keyboard than bring my chunky laptop. I'm still getting used to T9 (ie. I'm slow!) so using the keypad isn't really an option.
Cheers
I have this: http://www.freedominput.com/site/index.php?option=com_content&task=view&id=15&Itemid=32
I dont use it much but I have good experiences. Everything works, even the softkeys (Left key = Ctrl + Tab, Right key = Ctrl + X, I note it because in manual for Windows Mobile are mentioned different keys). Driver works, input in all applications. I have no problem with any program (use mostly mail, IM, web...).
The only thing what is pissing me off is that you have to generate unlock code for driver on your phone (is on their web), after this you cannot use generate and use this keyboard on any other device (which use drivers (can be used HID, bud some functions are left)). You can get one more code via their support, but other codes are required to buy... They want about £17. Thats really sad.
(Sorry for my English)
Thanks moneytoo, I'll keep hunting around eBay.
Just one thing I forgot to say... Because of the clamshell design of the phone, you cant put Qtek on the built-in holder (as you can see Blackberry on the previous link) because Qtek is too tall and heavy so you have to have them somewhere next to the keyboard.
Not my normal wont to buy such a new machine, but circumstances led to my purchase of a first-day-in-the-store Toshiba AT 700 Regza tablet running Android 3.2. After a couple of days of use, I have encountered one particularly annoying problem:
Voice input works quite well, though still on the basis of a few sentences at a time. However, when I do voice input in Gmail, it switches from English (the current language setting) to Japanese (Toshiba's initial market for the new box).
I'm almost sure this is really a problem with the implementation of FSKAREN, the Japanese conversion system. It's possible that it involves the keyboard selector, however. (Sorry, Dorothy, but the Toshiba website is clearly not ready yet, though I may telephone them later...) This behavior is different from my prior experience with voice input in Android (both versions 2 and 3). However, for whatever it is worth, the Japanese recognition is surprisingly good since my Japanese pronunciation is certainly not native-like.
Any ideas or diagnostic suggestions? I was tweaking around in the keyboard settings and actually got it to accept one sentence in English from within Gmail, but that is obviously not a solution. I'm loathe to disable FSKAREN or even to poke at it too hard, but I'm thinking that one solution might be to use an alternative keyboard and enable the input system selector...
Not sure if the background will help, but most of the applications are running in Japanese, though the main applications (as in those from the Google) and including Gmail do run in English mode with English menus. I can usually get along well enough in Japanese, but most of my correspondents read English, not Japanese...
I posted the same question in the Google forums, but I'm almost certain the increasingly evil Google will evade involvement and my prior experience with those help forums has been distinctly unhelpful. So I decided to be optimistic and try over here, too.
Basically I intend to buy this as a primary note taking device for lecture for this coming semester and beyond and I have some questions.
Firstly what is the best tablet office apps that work well with the hardware keyboard? I had a play with Polaris in a shop on the original Transformer but I'm just wondering if there is better out there.
It'd be nice if there was like an automatic save every 30 seconds/minute or similar feature.
Also it'd be VERY useful if there was an app that allowed me to open two files at once. So I could, say, have an editable .doc open on one side of the screen and a .ppt on the other...
Secondly how is the physical keyboard? Like I said I played with the Transformer recently and the keyboard seemed pretty nice. A little bit small but something I could get used to/fast on.
Might add more if I think of them.
Thanks, G.
Don't have keyboard so can't speak to that but for office apps I like Google docs and smart office
smart office is a lot better and is very good sure you will like it
tylermaciaszek said:
Don't have keyboard so can't speak to that but for office apps I like Google docs and smart office
smart office is a lot better and is very good sure you will like it
Click to expand...
Click to collapse
I nabbed the Smart Office APK in the Getjar $0 sale and it seems decent on my phone, does it have a tablet interface?
See I would love to use Google Docs but I heard it requires internet to work and due to the way my university's WiFi security is I'll only be able to use internet with apps that support proxy routing (as Android doesn't have this built in to the OS).
Yes the tablet interface is very nice I like it a lot
tylermaciaszek said:
Yes the tablet interface is very nice I like it a lot
Click to expand...
Click to collapse
Thanks for the screenshots!
Is it possible to have the edit option on screen always/in easy use?
I'll be keen to change formatting to underline/bold/italics etc quite often.
Also, how quickly can one jump in and out of list options?
EDIT: also how quickly can one "tab" in an indent and then get back out of it?
I would say for what you want this may not be for you
edit bar does not stay open but jumping into options is just a press of button
For you, you may want documents to go or office suite 5 I read good reviews of those
tylermaciaszek said:
I would say for what you want this may not be for you
edit bar does not stay open but jumping into options is just a press of button
For you, you may want documents to go or office suite 5 I read good reviews of those
Click to expand...
Click to collapse
Thanks.
Anyone else have input? Specific to my needs if possible
I had an original transformer, just got my prime yesterday.
I used my tf last two semesters for all my classes.
I usually use the pre-loaded supernote app to take notes. It takes kb input and you can draw as well (useful for science classes).
my teachers give us power point lecture slides and for that the polaris office is pretty good, I haven't tried the other office apps, but polaris should do most of what you throw at it.
Some of my teachers give pdf lecture notes, I use repligo reader to annotate on pdf.
Sent from my Galaxy S2
Just gonna bump this in the hope that someone can direct me to something that might help me more.
This PDF annotation software will help as I need to deal with a lot of case law etc.
I'm guessing that there is nothing out there currently that supports having two documents open at once side by side as I said above?
Main requirement would be snappy formatting (Bold/Underline/Italic), can this be done in Polaris with CTRL+B/U/I?.
Also the list thing, I know it's not automatic when tabbing like in Word but an easy/quick to use button is fine.
G8D said:
Just gonna bump this in the hope that someone can direct me to something that might help me more.
This PDF annotation software will help as I need to deal with a lot of case law etc.
I'm guessing that there is nothing out there currently that supports having two documents open at once side by side as I said above?
Main requirement would be snappy formatting (Bold/Underline/Italic), can this be done in Polaris with CTRL+B/U/I?.
Also the list thing, I know it's not automatic when tabbing like in Word but an easy/quick to use button is fine.
Click to expand...
Click to collapse
no, there is currently no way of running two apps at the same time, it's a limitation of all mobile based OS's, everything essentially runs in full screen mode.
the CTRL commands should work fine, i'm pretty sure i used them for various things on my tf101.
Are any of these aforementioned office suit apps compatible with odt (OpenOffice format)?
adiliyo said:
no, there is currently no way of running two apps at the same time, it's a limitation of all mobile based OS's, everything essentially runs in full screen mode.
the CTRL commands should work fine, i'm pretty sure i used them for various things on my tf101.
Click to expand...
Click to collapse
It's not about running two apps at once. It's about one app having two files open at once.
Say a word document on the left and then a powerpoint on the right.
I doubted it'd be available. Maybe it'll come.
Android Keyboard Issues
Hello. I am a new Android user who has purchased an RCA Viking Pro 10 2-in-1 Android Laptop running Android 6.0 with kernel version 3.18.22(not rooted). I use it to work on various projects on the go, offline about 95% of the time. I'm having some problems regarding the keyboard and cannot seem to root it. I would appreciate any help someone could offer.
My device is labeled as RCT6K03W13-Android6.0-v1.15.0-M00 and runs Android 6.0 kernel version 3.18.22. KingRoot fails to discover a rooting strategy, then tries anyway but fails. Please note that I have no other computer and only limited computer access.
The biggest issue involves to two cmd buttons that flank the spacebar. Pressing them opens Google App for a voice search, which I never use. This minimizes the app that I was using, starts google app, then minimizes that to show the search bar on the desktop (which I would also like to go away). Then a popup tells me that I'm not connected to the internet. Since I rarely am, this is extremely annoying. If I wanted to run a web search I would open Chrome myself. I certainly wouldn't want the results to appear in Google App, which doesn't work nearly as well. I blame RCA for poor design, placing hotkeys at the bottom of the keyboard where they're likely to be pressed accidentally (it is a small keyboard, after all).
I would like to remap the left and right Cmd buttons to the left and right mouse buttons. I tried External Keyboard Helper, but it can't remap the command buttons and won't remap anything to the mouse buttons anyway. The Viking Pro includes a touchpad mouse without buttons, which is fine for most Android users, but I intend to work extensively with Linux ports such as AndrOpen Office and GIMP Inkscape, and they require precision when dragging and dropping small objects.
Also, the two finger touchpad touch that's meant to simulate a right mouse button click works as a back button instead. I already have one of those on my screen and one on my keyboard, I certainly don't need a third. What I do need is a right mouse button. It should simulate a long press and/or the right button.
Unfortunately GIMP Inkscape and Pelya's linux translation layer don't run on Android 6, so I need to either run Linux Deploy, which requires ROOT, or go all out and just install Linux(perhaps Ubuntu Phone), which requires unlocking my boot manager. Perhaps I should have just bought a Linux Netbook instead, but the tablet was cheap and something about Android attracted me to it. I thought I would be able to find more g featured Linux ports, but Google did to good of a job when they monetized the package manager and locked out root access. I would think running x-11 over the framebuffer would be easy, and that people would port current versions of LibreOffice, Scribus, Inkscape, Blender, ext. I guess linux users are sore about google stealing Linux's thunder when they released Android just as Linux on phones, tablets, and netbooks was gaining traction.
As an old DOS gamer and amateur Linux programmer, I'm not averse to manually editing cfg files (or to setting jumpers to configure my hardware). Unfortunately, I'm new to Android and have limited internet access. Any help someone could offer to a 90s geek with out-of-date computer skills due to some legal problems would be greatly appreciated (the empty wallet hardly helps things).
Sincerely
Michael Palmer
[email protected]
MichaelCPalmer said:
Android Keyboard Issues
Hello. I am a new Android user who has purchased an RCA Viking Pro 10 2-in-1 Android Laptop running Android 6.0 with kernel version 3.18.22(not rooted). I use it to work on various projects on the go, offline about 95% of the time. I'm having some problems regarding the keyboard and cannot seem to root it. I would appreciate any help someone could offer.
My device is labeled as RCT6K03W13-Android6.0-v1.15.0-M00 and runs Android 6.0 kernel version 3.18.22. KingRoot fails to discover a rooting strategy, then tries anyway but fails. Please note that I have no other computer and only limited computer access.
The biggest issue involves to two cmd buttons that flank the spacebar. Pressing them opens Google App for a voice search, which I never use. This minimizes the app that I was using, starts google app, then minimizes that to show the search bar on the desktop (which I would also like to go away). Then a popup tells me that I'm not connected to the internet. Since I rarely am, this is extremely annoying. If I wanted to run a web search I would open Chrome myself. I certainly wouldn't want the results to appear in Google App, which doesn't work nearly as well. I blame RCA for poor design, placing hotkeys at the bottom of the keyboard where they're likely to be pressed accidentally (it is a small keyboard, after all).
I would like to remap the left and right Cmd buttons to the left and right mouse buttons. I tried External Keyboard Helper, but it can't remap the command buttons and won't remap anything to the mouse buttons anyway. The Viking Pro includes a touchpad mouse without buttons, which is fine for most Android users, but I intend to work extensively with Linux ports such as AndrOpen Office and GIMP Inkscape, and they require precision when dragging and dropping small objects.
Also, the two finger touchpad touch that's meant to simulate a right mouse button click works as a back button instead. I already have one of those on my screen and one on my keyboard, I certainly don't need a third. What I do need is a right mouse button. It should simulate a long press and/or the right button.
Unfortunately GIMP Inkscape and Pelya's linux translation layer don't run on Android 6, so I need to either run Linux Deploy, which requires ROOT, or go all out and just install Linux(perhaps Ubuntu Phone), which requires unlocking my boot manager. Perhaps I should have just bought a Linux Netbook instead, but the tablet was cheap and something about Android attracted me to it. I thought I would be able to find more g featured Linux ports, but Google did to good of a job when they monetized the package manager and locked out root access. I would think running x-11 over the framebuffer would be easy, and that people would port current versions of LibreOffice, Scribus, Inkscape, Blender, ext. I guess linux users are sore about google stealing Linux's thunder when they released Android just as Linux on phones, tablets, and netbooks was gaining traction.
As an old DOS gamer and amateur Linux programmer, I'm not averse to manually editing cfg files (or to setting jumpers to configure my hardware). Unfortunately, I'm new to Android and have limited internet access. Any help someone could offer to a 90s geek with out-of-date computer skills due to some legal problems would be greatly appreciated (the empty wallet hardly helps things).
Sincerely
Michael Palmer
[email protected]
Click to expand...
Click to collapse
have youhad any luck rooting your device? i have the same one and tried ALL of the one click root apps with no luck
Hello everyone I am trying to route a tablet root model number is RCT6K03W13 I can’t seem to find any won that routes the device And it’s running android version 6.0
And kernel Version 3.18.22 can someone please help me I would greatly appreciate it
Hey guys, This is definitely a LONG SHOT, (it's been long time since), I have old devices which I need to revive and make it function like it used to back in the day (this is symbol/motorola scanner MC75A and MC50) and I need access to Korean Language IME on Windows Mobile OS's. I had full version of Diopen6 back in 2011 or so on my old PC, but of course I don't have any of my old files, i've searched for days hoping I had some kind of archive on my old HDD, also looked high and low on google and naver (Korean search engine) . DIOTEK seems to be gone for awhile too. So i'm not even sure if I'll able to even activate the diopen software if I find it.
I've found language inputs for WM 6.5 on old thread which uses MOAKEY, it works for WM 6.5 however I would like QWERTY if possible just like what diopen used to do. the problem with MOAKEY is it fills up nearly the whole screen, while I need to use the inputs on browser. as for MC50 (WM2003), I bricked it twice trying to install just korean fonts, i wasn't able to locate any cab for fonts on WM2003.
If anyone can point me to right direction for IME on these OS, it would much appreciate it!