Yeah, or at least I think so...
Everything was working fine till yesterday morning. I checked my phone and it didnt charge anything at all after a whole night connected to the plug.
Actually, the USB port "works", but the phone itself takes a good damn time to recognize it as if it was charging, and it will never detect the USB connected to my PC. Also, the only way I can possibly charge my phone is by connecting to my PC for some reason.
Those errors happened just a day after I flashed my droid to BB 52 and installed Ultima 4, a mod I found here.
So, I was guessing if anyone could help me out, maybe trying to flash the BB back to my 49 via XRecovery (wich I did not find any possible ways 'til now), or just "rebuilding" the USB drivers via phone. I can access my SD card via wi-fi still, so I think there could still be a salvation for my problem
Does anyone have any idea?
Also, no, I can't even access the flash mode anymore. And something I found here, and that was quite strange, is the fact that if I replace my battery while connected, the USB green LED will remain active, but my phone won't boot in any possible ways 'til I remove the USB cable. (wtf.)
Someone just needs to upload you a xrecovery backup.
Can anyone give this dude a hand?
Related
Hi. I have a problem here. Is it possible to flash new rom directly through bootloader, my activesync is not working properly, and something is wrong with my usb connection - when I connect my device to PC via usb, in bootloading mode - it gets connected and disconnnected about 50 times in one minute, no .RUU is able to recognize it for long enough to complete the instalation. I've tried to reinstall the activesync, did hard reset of my phone, deleted relationships - but no luck. What worries me most is that usb connection problem. It's only with HD2, all other devices connect properly. Anyone knows the answer, what should I do in order to fix that? P.S I always remove sim and sd card, and disable my antivirus programs and firewalls during my flashes....
I bricked it, finally...
And now - I'm stuck...seemed I finally got connected via usb through bootloader for longer than two minutes, so I started fleshing my radio... and it got disconnected after a minute by itself again, in the midllle of the process...Now, there's an upgrade rom code error on green field of my bootloader, telling me to try again, only - I can't do recovery, cause my usb connection gets on/off 50 times a minute, whenever I try to do the recovery .... Any suggestions?
ivona7 said:
And now - I'm stuck...seemed I finally got connected via usb through bootloader for longer than two minutes, so I started fleshing my radio... and it got disconnected after a minute by itself again, in the midllle of the process...Now, there's an upgrade rom code error on green field of my bootloader, telling me to try again, only - I can't do recovery, cause my usb connection gets on/off 50 times a minute, whenever I try to do the recovery .... Any suggestions?
Click to expand...
Click to collapse
Possible solution, you should try different USB ports of your PC.
Always make sure your battery capacity above 50%.
If you don't have HSPL installed, you should only flash the CORRECT OFFICIAL STOCK ROM (go to htc website).
Other alternative, you can flash via micro sd card.
Download the CORRECT OFFICIAL STOCK ROM and extract it using either 7zip or winrar. Find the file named: RUU_signed.nbh
Rename it to: leoimg.nbh
Copy it to the root of micro sd card. Insert it to the phone.
Now, make sure you turn off the phone.
Then, press at the same time, the volume down and power on button, this will bring you to the boot loader.
Follow the onscreen instruction.
Good luck
Thanks for the reply...I have HSPL 2.08, it was fully charged, and was flashing radio 2.12. I was planing to flash a custom rom after words. I've tried about 8 usb ports on my computer, and always the same thing - endless connect/disconnect game, or not connected at all... If I get lucky - it will turn out to be only usb cable, but if I'm not and if it is usb port on my HD2 - I'm doomed, I might as well throw it to the garbage, cause replacement of the motherbord cost as much as new phone ... And, I'm afraid - that's the strongest possibility, I never had a problem charging a phone before this, but a member here explained me that usb port on HD2 has 4 pins, 2 for charging and 2 for data transfer. And that it seems - my data pins are ****ed.. ... So, anyway, I'm gonna try flashing this radio and new rom from sd card, but how am I gonna charge my phone now, in order to do that (I've been trying to establish connection to pc from my bootloader all night, so battery must be low by now) cause when it's turned on and put to charge warning comes up on that black screen: Software update failed, please try again - and the led for charging battery never turns on ?
ivona7 said:
Thanks for the reply...I have HSPL 2.08, it was fully charged, and was flashing radio 2.12. I was planing to flash a custom rom after words. I've tried about 8 usb ports on my computer, and always the same thing - endless connect/disconnect game, or not connected at all... If I get lucky - it will turn out to be only usb cable, but if I'm not and if it is usb port on my HD2 - I'm doomed, I might as well throw it to the garbage, cause replacement of the motherbord cost as much as new phone ... And, I'm afraid - that's the strongest possibility, I never had a problem charging a phone before this, but a member here explained me that usb port on HD2 has 4 pins, 2 for charging and 2 for data transfer. And that it seems - my data pins are ****ed.. ... So, anyway, I'm gonna try flashing this radio and new rom from sd card, but how am I gonna charge my phone now, in order to do that (I've been trying to establish connection to pc from my bootloader all night, so battery must be low by now) cause when it's turned on and put to charge warning comes up on that black screen: Software update failed, please try again - and the led for charging battery never turns on ?
Click to expand...
Click to collapse
Yeah it sounds like your USB port on your HD2 is bad. If your HD2 is still under warranty I flash the official stock ROM via SD card so you are back to complete stock and good for warranty repair. Also so you know if you bought your HD2 secound hand if it was still under warranty when you bought it the warranty is transferable.
Ok people, I've sorted it out ... Lucky me - no faulty usb port on HD2, no faulty cable, and, no faulty HD2 ... I've flashed a different radio from sd card, and also rom, and now - connectivity with my pc is - never better ... Even ActiveSync is working like it hasn't been in 6 months, hahahhhh ... Point is - it was my pc punishing me for playing with it's registry, few nights before ... I was really confused, cause HD7 had excellent connectivity with my pc, but HD2 really bad, so I really thought there was something wrong with my beloved HD2 ... Than, I remembered I've messed with my registry the other night, and deleting some non-existing pocket pc paths in it... So, I repaired my windows on pc, and now everything works like a charm .... What can I say - curiosity can have very high price, sometimes .... But - fortunately, I'm as lucky, as it gets ...
I flashed a custom rom a couple of months back. That rom was android version 2.3.5.
Now when I try and connect my phone to my pc using the standard usb cable, it only charges but no connection.
I did some reading before I posted and found several methods to try out
1.Use kies, download drivers
2.Enable USB Debugging mode
3.Go to settings-wireless and network-usb utilities and connect it through there.
None of the methods mentioned above worked.
So my questions to you guys are
1. Does this problem have to do with the custom rom?
2. Can I degrade to the stock rom without the use of an USB cable?
2b Can I update to another custom rom (because the phone charges when it is connected to the pc, even though I cant see it on "my computer", it should still be considered as connected?) ?
3. Which is the best custom rom out right now (Speed and performance wise)
*Side note - I know people prefer different custom roms based on their taste, but I really want to think what you guys think about which one I should upgrade to!!! I also might want to overclock to 1.6 and root the phone in the coming week if I can solve my usb problem!
Have you tried using SwiFTP app on your phone and Filezilla on your pc, then you can transfer files wirelessly
killall said:
Have you tried using SwiFTP app on your phone and Filezilla on your pc, then you can transfer files wirelessly
Click to expand...
Click to collapse
Yes I have but it wasn't what I was looking for. My phone randomly gets usb connected and starts charging without the cable being connected???
I went to the retail store I bought it from and he said you should degrade your firmware and see if the problem goes away, if it doesnt we send it in for repair.
But how can I do that if my usb only charges when I connect to the pc?
There is a Mobile Odin apk. Perhaps you could install that then flash stock firmware with it. You would have to get the .tar onto your phone though.
Unfortunately, if I´m not wrong your trobule seems to be a hardward issue.
My cell phone began a couple of weeks ago with the same problem, and it became even rather serious. Some days ago it didn´t charged if I connected the charger when it was on. I should switch it off and then connect the charger, having done this, the cell rebooted by itsefl and then began charging.
But, just seeking and testing I bought a "charger block replacement" in ebay and replaced it by myself. It is not complex to do it on your own... today I am happyy.. cause I fixed it..
If your problem continue.. I hope you will remember my words!
Well, the day before it occurred to me that I'd like to install a custom ROM, therefore I went on to plug my phone into my PC and for my surprise, the phone didn't pop that MTP warning and the PC did not recognize it.
So I went around and changed USB ports, cables and PCs, same thing.
Decided to try Mass Storage mode, when I press the START button and put in the cable it goes back into the main start screen.
So I went on and tried that *#7284# trick people used since apparently 4.0.3 bugged some crap stuff in the phone, no success either.
Strangely enough I can connect the "pendrive dongle" and it will map pendrives.
Well, I don't have my phone rooted or with SU so that means CWM from app store won't be able to install the recovery module, and I can't install... you get the picture.
Nor ODIN nor HEIMDALL will recognize my phone in recovery mode, wich suggests that the data lanes on my phone went somewhat dead.
Finally, any cable I plug in the phone says it's charging my device, wich leads me to belive that the usb port is dead.
Anyone had this issue?
Anyone can confirm me I'll have to take it to Sammy's assistance?
Sure looks like the USB is dead/dying.
Sent from my digital submersible hovercraft.
So I got one more question, can I root and/or install CWM so I do not stay dependent of the USB to update it or I do need to plug in the USB to install CWM through ODIN?
Several problems
It can be several reasons
1.the usb is dead buy new
2. try factory resetting the device
3. install kies on pc it will install all the drivers that you need
4.your usb port(of the phone) is dead
I had the same problem pc was saying "USB cannot be recognized" I TRIED EVERYTHING from factory resetting, changing pc usb ports, changing usb, changing kernel, roms, trying on other pc, reinstalling kies and drivers but nothing. The problem was in the usb port on the phone where you connect the charger on the phone. That part is weak and so you have to change it. Take to customer service with your warranty and they will fix it without charging anything just tell them your problem and say that you read that most of the galaxy s2 users have this problem and that you didn't touch the hardware of the phone
Angelkom said:
It can be several reasons
1.the usb is dead buy new
2. try factory resetting the device
3. install kies on pc it will install all the drivers that you need
4.your usb port(of the phone) is dead
I had the same problem pc was saying "USB cannot be recognized" I TRIED EVERYTHING from factory resetting, changing pc usb ports, changing usb, changing kernel, roms, trying on other pc, reinstalling kies and drivers but nothing. The problem was in the usb port on the phone where you connect the charger on the phone. That part is weak and so you have to change it. Take to customer service with your warranty and they will fix it without charging anything just tell them your problem and say that you read that most of the galaxy s2 users have this problem and that you didn't touch the hardware of the phone
Click to expand...
Click to collapse
Warranty has already expired.
Kies was installed on the PC, ODIN gives no info @ COM port.
I wanted to connect it just to root and install CWM so I can swap ROMs as much as I want.
Thing is, the customer service wants 1 week to assess the issue and probably 100USD to fix it.
So for some god-knows-why reason my phone decided to conect to MTP while charging, I quickly restarted it into revocery mode and flashed CF_Root w/ CWM5.5.
Successful!
Bloody USB thingy!
Now I can start messing around with the phone.
Anyone has a n00blet guide on ROMs?
I was thinking about moving to CM 10.1, one of those nightlies running 4.2.2.
This is the one I used >> CF-Root-SGS2_XW_OXX_LPE-v5.5-CWM5
Can anyone suggest actions?
For future you should change your USB-Port. Here we get one for about 15 € (about 20 $) in ebay. It's very simple to change and then you have a full working phone again. Just watch the Videos on Youtube and everyone can do this. Hope I could help!
Hi guys,
Its a bit confusing but I'll try to keep it as short as possible. It seems basically that I can charge fine in recovery and download but not in the ROM. Syncing doesn't work at all except download..
I have an i9100m. Ran NeatROM and RootBOX and dabbled with a few roms.
Now I'm not sure if it was the roms or wear and tear but I had ASSUMED until today that my USB port was messed. It would not even charge from a PC nevertheless mount as a mass storage on my PC. It can charge fine from an AC adapter.
Anyway, today I randomly decided to put my phone into download mode and what do you know, the phone detects, and I even see it in ODIN, so I guess my USB port is not messed afterall. Perhaps something with the ROMs and kernels that messed it up?
I think this was around the same time when my Triangle went away.... (I never removed it). In download mode now, it says:
Custom binary Download: NO
Current Binary: SAMSUNG Official
I'm rooted and not stock at all so I wonder if that's the cause?
I was thinking of downloading a stock TAR of my carrier and flashing through ODIN. Do you guys think this is sufficient to "Reset" it back to how it was all the way before? And then I'll root and go back to one of my trusted roms (and not mess around)
Thanks
Do you use the original USB cable to connect your phone? That could be an issue.
Anyways, I don't think that something is messed up software-side if you tried several ROMs.
Worst case is that the USB port of your phone is damaged =/
Gesendet von meinem GT-I9100 mit Tapatalk 4 Beta
Yes I am using the original cable. (all same result but obviously wanted to use the original just in case)
I was thinking the USB port was damaged too because after reading, I guess apparently I accidentally created a usb jig? (triangle went away + stats wiped...)
But that aside, if my USB port is damaged, how come when I'm in download mode, PC and ODIN detect a device is connected and it charges, whereas within the ROM, I get neither ???
Just an update guys,
I used ODIN to flash completely back to stock... and I still cannot charge from PC. Basically computer doesn't see the phone at all. So it has to be a damaged port.. unless theres something else other than the internal SD that I can wipe????? I wanted to wipe everything..
Still really puzzles me though... that ODIN can see it in Download Mode.
One of the mysteries I guess.
Did you try to clean your mini usb port on the mobile? It could help.
Sent from my GT-I9100 using Tapatalk 2
So....your phone only charges on DL Mode?????
Sent from the little guy
I have tried to blow some air in there.. any other suggestions?
Well, the computer only recognizes the device in download mode, Windows sees the device, otherwise it doesn't.Just strange that I was able to flash an entire stock image through ODIN but in the ROM can't even get the computer to recognize that ANYTHING is plugged in (or the phone to charge so the phone doesn't see anything either)
And again, whats even more strange is that i had that one cheap extendable USB cable that probably messed everything up (it removed my triangle..so I accidentally somehow created a jig?) is able to CHARGE the phone even in ROM but still the computer can't see it as a device. LOL
This is so messed. I guess my main thing is even if I go ahead to replace the USB port (get it repaired), do you guys still think this problem would occur... =\
stx8 said:
I have tried to blow some air in there.. any other suggestions?
Well, the computer only recognizes the device in download mode, Windows sees the device, otherwise it doesn't.. =\
Click to expand...
Click to collapse
I currently have the exact same problem, except for the flaky usb cable removing your triangle. Mine is still there.
I brought my S2 to a repair shop because i was sure it was my USB port, but the guy there told me it connected in download mode just fine so the USB port should be fine.
Here is what I tried so far
- cleaned USB port
- Used diferent cables
- Used different PC's
- Used different kernals
- Used different roms
- Re-formated/cleared/wiped everything I could find.
Did anyone find a solution? Should I still have my USB port replaced?
Wired99 said:
I currently have the exact same problem, except for the flaky usb cable removing your triangle. Mine is still there.
I brought my S2 to a repair shop because i was sure it was my USB port, but the guy there told me it connected in download mode just fine so the USB port should be fine.
Here is what I tried so far
- cleaned USB port
- Used diferent cables
- Used different PC's
- Used different kernals
- Used different roms
- Re-formated/cleared/wiped everything I could find.
Did anyone find a solution? Should I still have my USB port replaced?
Click to expand...
Click to collapse
did u tried to change the usb port ,because download mode doesn't require a battery ,u can try to go to download mode then remove the battery and u will still in it
hardware problem
Hello Everyone,
I was worndring if it is in some how possible to upgrade my GT-I9070 from gingerbread 2.3.6 to Kitkat or other custumized rom without having to use odin.
I have a problem with connecting my phone to the my pc, my laptop won't regonize it, I think is a hardware problem.
Thanks a lot
Yassine
darkclub said:
Hello Everyone,
I was worndring if it is in some how possible to upgrade my GT-I9070 from gingerbread 2.3.6 to Kitkat or other custumized rom without having to use odin.
I have a problem with connecting my phone to the my pc, my laptop won't regonize it, I think is a hardware problem.
Thanks a lot
Yassine
Click to expand...
Click to collapse
Not unless you are already rooted. Does the PC not recognize that you have plugged it in at all or does it just not load the drivers correctly? Best way to tell is to open your Device Manager and plug in the phone. the DM should reload and show something, whether an error or not. If it does not blink out and reload when you plug / unplug the phone, then it's either a hardware issue with the phone's USB port, a bad cable, or bad USB port on PC. And it is possible for a phone to charge correctly, but have issues connecting to a computer if the data pins are messed up. If it IS the phone's port, the repair isn't that bad and could be handle with some patience and simple tools as this one does not involve soldering. You'd need this:
http://www.amazon.com/Samsung-Galaxy-Advance-GT-i9070-Replacement/dp/B00B5OS2LY
https://www.youtube.com/watch?v=_0nuBDAuLm8
You won't find a better guide than that, that guy is amazing at teardowns.
es0tericcha0s said:
Not unless you are already rooted. Does the PC not recognize that you have plugged it in at all or does it just not load the drivers correctly? Best way to tell is to open your Device Manager and plug in the phone. the DM should reload and show something, whether an error or not. If it does not blink out and reload when you plug / unplug the phone, then it's either a hardware issue with the phone's USB port, a bad cable, or bad USB port on PC. And it is possible for a phone to charge correctly, but have issues connecting to a computer if the data pins are messed up. If it IS the phone's port, the repair isn't that bad and could be handle with some patience and simple tools as this one does not involve soldering. You'd need this:
http://www.amazon.com/Samsung-Galaxy-Advance-GT-i9070-Replacement/dp/B00B5OS2LY
https://www.youtube.com/watch?v=_0nuBDAuLm8
You won't find a better guide than that, that guy is amazing at teardowns.
Click to expand...
Click to collapse
Dude really thankful,
As you say, the PC dosn't recognize that the phone is plugged at all, I try all the usb port on my laptop, different cable, and even different laptop and the same problem keep comming up.
I tried also to reboot in odin mode to see if my laptop detecet anything, but nada, nothing in the DM.
Also, like you expect, it can charge but no data connection, and whene it turned off and I plug it it automaticly turned on by itself.
I pretty convinced that it usb port is screwed.
So, to install a rom my phone have to be rooted!! no way to root it from the recovery mode?!
Thanks again
darkclub said:
Dude really thankful,
As you say, the PC dosn't recognize that the phone is plugged at all, I try all the usb port on my laptop, different cable, and even different laptop and the same problem keep comming up.
I tried also to reboot in odin mode to see if my laptop detecet anything, but nada, nothing in the DM.
Also, like you expect, it can charge but no data connection, and whene it turned off and I plug it it automaticly turned on by itself.
I pretty convinced that it usb port is screwed.
So, to install a rom my phone have to be rooted!! no way to root it from the recovery mode?!
Thanks again
Click to expand...
Click to collapse
You can try to clean your USB port of the phone with some compressed air, in case some pocket lint got in there too. Doesn't take much to mess these things up, unfortunately. But yea, I doubt there is a way to root it in the stock recovery as most Samsung phones don't have this option. It'd take less time to just fix it probably then figuring out how to jump through all the other hoops to find a way around it.