Related
Hi All,
For my blackstone, i need some spare parts. Does somebody know where to buy:
-torx screws
-bluetooth & gps connection cables
-probably a new main board
Tnx!!
Dennis
same here! especially gps cable
Cetin said:
same here! especially gps cable
Click to expand...
Click to collapse
E
B
A
Y
The magic site
But, most probably you can't get a new main board from ebay. I doubt even HTC has them. Changing a new main board is essentially like changing the whole phone, no?
Hello if your mainboard has gone wrong send it to HTC. The mainboard on my HD packed up I got in touch with HTC UK http://www.htc.com/uk/ (go to support and phone them up) they picked the phone up a week ago Tuesday tested the phone/fitted a new mainboard and sent it back, got it back last Wednesday. Fixed for free, very polite and very helpful
Jez
the problem is that my device felt to the ground after 2 months :S Then i got my screen repaired but not by htc since it is not warranty. The device still resets every now and then, so i try to fix it myself... that's why i need these spare parts... so suggestions still welcome!
nobody?
The only possible place to get a new mainboard will be htc.com. Also why a gps cable when the touch has built in gps. jez
jez.stix said:
The only possible place to get a new mainboard will be htc.com. Also why a gps cable when the touch has built in gps. jez
Click to expand...
Click to collapse
You didn´t understand the gps cable thing. It´s the gps cable behind the cover.
damasterman said:
nobody?
Click to expand...
Click to collapse
I had a Hermes that kept resetting after loading a new ROM. I changed it to another and it stoppped happening....Are you sure it's not a software problem?
damasterman said:
Hi All,
For my blackstone, i need some spare parts. Does somebody know where to buy:
-torx screws
-bluetooth & gps connection cables
-probably a new main board
Tnx!!
Dennis
Click to expand...
Click to collapse
Hey damasterman,
did you find any part?
I still need a gps cable. I'm looking for it in ebay but no way.
Can anyone help me getting a gps cable?
Push...
No one still don´t know where to find coaxial cable from inside?
Cetin said:
Push...
No one still don´t know where to find coaxial cable from inside?
Click to expand...
Click to collapse
Try this one:
www.farnell.com
search on item 1325918
it's 3cm to long but schould fit
Good luck
Wow!
I think that´s it.
Did you try this one?
Is it the right size?
Cetin said:
Wow!
I think that´s it.
Did you try this one?
Is it the right size?
Click to expand...
Click to collapse
I'll get it tomorrow and try it later, let you know if it fits, i know for sure about te connectors, but it is 3cm longer, so should see if you can put the 3cm anywhere under the mainboard.
Cu, Mario
Usemyass said:
I'll get it tomorrow and try it later, let you know if it fits, i know for sure about te connectors, but it is 3cm longer, so should see if you can put the 3cm anywhere under the mainboard.
Cu, Mario
Click to expand...
Click to collapse
Did you try this one and what part number did you end up ordering?
HTC HD Top volume board
Anyone know where to get the top volume board for the HTC Touch HD?
Cetin said:
Wow!
I think that´s it.
Did you try this one?
Is it the right size?
Click to expand...
Click to collapse
I put it today into the HTC HD, it fits, but like i said its 3 cm to long but you can put the 3 cm extra coaxial parrallel to the red/black vibrator cable.
Good luck
try gsm4world.us ...got lots from there for my touch hd
tacginc said:
Anyone know where to get the top volume board for the HTC Touch HD?
Click to expand...
Click to collapse
am looking for the same part a friend found this.. ebay item 190342978567 am gonnd try it out soon!
hi
i have a htc touch plus or as they call it htc touch dual.digitizer issue it stoped responding so i bought new one fitted in and still the same problem .i think is a software problem i guess driver software for touch screen .if any one can help please
thanks
Touch Dual digitizer
Hi Saliml2
Not convinced it is a software issue. My digitizer on T-Mobile Touch Plus did the same thing. It stated behaving erratically and then stopped responding altogether. I replaced the digitizer (via eBay) and it work for a few days and then stopped again.
I have read around the internet and have tried several ROM updates etc (currently running a WM 6.5.5 found in other area of this forum) but this has not solved the problem.
It seem to be an alignment issue - i.e. screen alignment is outside the screen area, but there seems to be no way of getting it back. Could be a fault on the phone mainboard (?) but there doesn't seem to be any info around apart from sending it to HTC for repair (not viable as the phone value negates this)
My phone is still not working, I might try opening it up again and reseating the digitizer cable but have done this twice already.
Have you try change the flex cable?
I had one to, with the same problem, and after changing the flex everything was ok...
Good luck!
Hi Amokh Just to clarify, what is the flex cable? The digitizer has a cable already attached to it that plugs in to a zif connector on the mainboard - I assume that this controls the data flow for the digitizer.
Any help would be appreciated.
deepthought2471 said:
Hi Amokh Just to clarify, what is the flex cable? The digitizer has a cable already attached to it that plugs in to a zif connector on the mainboard - I assume that this controls the data flow for the digitizer.
Any help would be appreciated.
Click to expand...
Click to collapse
Maybe this is helpfull http://www.pdacenter.ru/razborka/razbor_htc_touch_dual/
Goodluck
Flex cable, i was mean the cable between the mainboard and the lcd block, you can see it in the previous link, picture 20. Have you try it to change?
hello guys how did you manage to put the digitizer cable in place mine doesn t seem to get in place do i need something to hold the connector in place???
Greetings.
Anyone knows where I can find a coaxial cable for the wifi for the HD2?
It's not only nicotine u use, is it. Wat the hell do you mean
If you're thinking of hooking up an external antenna to your HD2, as far as I know you'd have to open up the HD2 and wire on a coax port to the right part of the board, and I've got no idea how to get that working!
If you do manage to do this, let us know how!
Sorry if I've misunderstood your rather strange question!
Did you lose it when disassembling your HD2 or something?
I believe it's just a standard coax cable with u.fl connectors, the problem would be finding one with correct length. eBay has plenty, but they're anywhere from 20 to 50cm - don't really want to try fitting that in a phone...
you can find them at mouser com
i need also one and did some search work
you need i W.FL-2LP-04N2-A-(60) u.fl is a lit bigger.
2lp means two sides connector 04n ticknes 0.83mm, 2 color, (60= lenght)mm.
see also data sheet in table on the side. looks, they sel also just one.
i not alowed to place the link. becourse i am new here.
onlly did not fnd out or the have also female connectors
ewdin said:
Did you lose it when disassembling your HD2 or something?
Click to expand...
Click to collapse
Yup! Correct!
Thank you all for your replies. I did find one on ebay, from a broken one.
I hope he will sent me the right one. If not I'll try ur suggestion Tristan_1. Thx
I was on same situatio with wifi cable. Searched over net and nothing. Looked to here recommended shop too. Price for shpping to europe is 10 times bigger than cable itself.
But i finded on ebay cables to Touch Daimond. On pics they looks same like on hd2. I asked here on touch forum lengts for both cables. They are SAME with hd2 cables. Only difference is that hd2 uses for gps white one' touch black. I opened more 10 hd2 (all from europe). Abot t-mobile i cant say anything.
On ebay i finded many sellers with possible search string: OEM AERIAL ANTENNA WIRE RECEPTION FOR HTC TOUCH DIAMOND
Usually after two week i can finally confirm are these touch diamond cables right ones for hd2 too.
Sent from my HTC HD2 using Tapatalk
Tristan, THANK YOU THANK YOU THANK YOU!
I have been scouring the internet looking for this part and had no idea what to look for so thank you so much for your post. I purchased that part and hopefully I can report back that my phone works again!
.d2onderdelen .nl
i find out, that they have them also. and they sel them in pares. also other part of the hd2
Finally i can CONFIRM that YES wifi/bluetooth antenna coaxial cable is same what used on HTC HD2 (can confirm only EU model). About T-Mobile i cant say.
But GPS cable wich one sell with wifi/bluetooth cable dont fit. Its littlebit longer but short for using on GPS.
This one wich i bought dont had so quality on connectors side (not for many many times connect/disconnect) like original. Yes it was cheap too. But i tested work and signal and there was no loss.
Hope helped now many users who cant find replacment for wifi / bluetooth coaxial cable.
Just try on ebay string OEM AERIAL ANTENNA WIRE RECEPTION FOR HTC TOUCH DIAMOND or just try find spare parts for Touch Diamond. I itself used seller named gsm4world.
ahanssen said:
Tristan, THANK YOU THANK YOU THANK YOU!
I have been scouring the internet looking for this part and had no idea what to look for so thank you so much for your post. I purchased that part and hopefully I can report back that my phone works again!
Click to expand...
Click to collapse
Next time use Thanks button
Anyway, this info was FREE
Tristan_1 said:
.d2onderdelen .nl
Click to expand...
Click to collapse
Thanks but hard to explore site if its only on one lang and you dont know it.
It true that it is a bit hard to read dutch, but easy to find the right phone, and were you have to look for (onderdelen) that are the inner part of the phone
I find out that the coaxial cable are out of the store on the moment. i can not find them Anny more.
TRY HERE
For Coaxial try also parts4repair.com and search for bluetooth antenna and not for wifi (which are the same anyway).
For me the solution of using coaxial from Diamond did'nt work.
Hope this will...
Cheers
Please help, I miss my tablet.I had the common problem with the power thingy inside the tablet going out so i opened it to solder but did not fix.So i ordered the charging dock and waited for a month and a half.I get it today and was so excited to only plug it it and got power and charging everything is perfect,i go to swipe over on my arrow to unlock the screen and nothing!I have no touch controls on screen what so ever.But the soft keys work,they do not do me any good but they work.The home key takes me to my home page and mag glass goes to the internet.Does any body have any ideas of what could have happened or what i can do to fix this,please????
alcapone1130 said:
Does any body have any ideas of what could have happened or what i can do to fix this,please????
Click to expand...
Click to collapse
First, check for disconnected or loose cables inside the gTab.
Next, if it isn't a HW fault like loose cables, then connect the USB cable to the gTab and run this ADB command (you will have to install and set up ADB if you haven't already done so):
Code:
C:\SOME\PATH> [B]adb shell "echo -n 1 > /sys/devices/platform/tegra_touch/calibration"[/B]
Digitizer Cable/Connection
alcapone1130 said:
Please help, I miss my tablet.I had the common problem with the power thingy inside the tablet going out so i opened it to solder but did not fix.So i ordered the charging dock and waited for a month and a half.I get it today and was so excited to only plug it it and got power and charging everything is perfect,i go to swipe over on my arrow to unlock the screen and nothing!I have no touch controls on screen what so ever.But the soft keys work,they do not do me any good but they work.The home key takes me to my home page and mag glass goes to the internet.Does any body have any ideas of what could have happened or what i can do to fix this,please????
Click to expand...
Click to collapse
The attached pdf contains photos of the digitizer/cables and their connections inside the gtab. Check for loose connection and/or broken wires on both ends.
Al
aabbondanza said:
The attached pdf contains photos of the digitizer/cables and their connections inside the gtab. Check for loose connection and/or broken wires on both ends.
Al
Click to expand...
Click to collapse
Ok,First thank you so much for helping.Ok,One of the cables you shown does have two broken wires,it is the kind of short wire with black cloth like material over it that runs unde the shiny brown plastic piece.Is there a way to fix that or rig it to get me back up and touching again?Thank you again for helping me out,and you already pinpointed my problem,now i am hoping you can fix it,lol.
Where is the break?
alcapone1130 said:
Ok,First thank you so much for helping.Ok,One of the cables you shown does have two broken wires,it is the kind of short wire with black cloth like material over it that runs unde the shiny brown plastic piece.Is there a way to fix that or rig it to get me back up and touching again?Thank you again for helping me out,and you already pinpointed my problem,now i am hoping you can fix it,lol.
Click to expand...
Click to collapse
I assume since you didn't send in under warranty for the power connector that it's no longer under warrantly!
Exactly where is the break? Close to (or at) one of the connectors? Which end (motherboard end or digitizer end) of the cable? Obviously closness to the connector makes it more difficult. I have seen a post where another use had the break pretty close to the connector & fixed it though.
Al
I totally forgot that i made a youtube video yesterday,here is the address http://www.youtube.com/watch?v=kFNRtDhr5EQ I have been so stressed out about getting my gtab back it slipped my mind.Oh, the broken end is what plugs under the silver area not under the brown area.
aabbondanza said:
I assume since you didn't send in under warranty for the power connector that it's no longer under warrantly!
Exactly where is the break? Close to (or at) one of the connectors? Which end (motherboard end or digitizer end) of the cable? Obviously closness to the connector makes it more difficult. I have seen a post where another use had the break pretty close to the connector & fixed it though.
Al
Click to expand...
Click to collapse
I totally forgot that i made a youtube video yesterday,here is the address http://www.youtube.com/watch?v=kFNRtDhr5EQ I have been so stressed out about getting my gtab back it slipped my mind.Oh, the broken end is what plugs under the silver area not under the brown area.
alcapone1130 said:
I totally forgot that i made a youtube video yesterday,here is the address http://www.youtube.com/watch?v=kFNRtDhr5EQ I have been so stressed out about getting my gtab back it slipped my mind.Oh, the broken end is what plugs under the silver area not under the brown area.
Click to expand...
Click to collapse
If you magnify the digitizer circuit (lower photo in the pdf) you will see the label for each of the lines in the cable. Assuming the lines run straight thru, it looks like the ones that broke are the power & ground to the circuit (VSS & GND). That would explain the touch screen not working at all.
Hard to tell from the video where the breakis, but it looks real close to the connector.
Your best bet may be looking for someone who has a broken digitizer (outer glass) or gTab and is selling it for parts. I looked in the Marketplace forum here on XDA & there is one non working gtablet someone is asking $55 for. I also saw another one up for bid on ebay ($40 latest bid). You my have to ask if the cable is good on them.
Not a whole lot of options for repair. As you've already experienced, the cable is small & fragile.
If the connector has removable pins then you could remove the pins, solder the wire to it & reinsert the pins, BUT from the picture it doesn't look like they are removeable.
You could solder the 2 wires to the pins coming out the back of the socket but they look too small to easily solder to.
The last option would be to rigg the cable to work. There are a couple of possibilites but I would rather you consider the other options before suggesting a repair of the cable itself. If you can, see if you can take a closeup, high res photo of the back fo the connector where the wire broke. PM me & I'll send you my email address to send it too.
Al
aabbondanza said:
If you magnify the digitizer circuit (lower photo in the pdf) you will see the label for each of the lines in the cable. Assuming the lines run straight thru, it looks like the ones that broke are the power & ground to the circuit (VSS & GND). That would explain the touch screen not working at all.
Hard to tell from the video where the breakis, but it looks real close to the connector.
Your best bet may be looking for someone who has a broken digitizer (outer glass) or gTab and is selling it for parts. I looked in the Marketplace forum here on XDA & there is one non working gtablet someone is asking $55 for. I also saw another one up for bid on ebay ($40 latest bid). You my have to ask if the cable is good on them.
Not a whole lot of options for repair. As you've already experienced, the cable is small & fragile.
If the connector has removable pins then you could remove the pins, solder the wire to it & reinsert the pins, BUT from the picture it doesn't look like they are removeable.
You could solder the 2 wires to the pins coming out the back of the socket but they look too small to easily solder to.
The last option would be to rigg the cable to work. There are a couple of possibilites but I would rather you consider the other options before suggesting a repair of the cable itself. If you can, see if you can take a closeup, high res photo of the back fo the connector where the wire broke. PM me & I'll send you my email address to send it too.
Al
Click to expand...
Click to collapse
Wow,Thank you so so much,Can you get me in contact with the guy with the gtab for $55.00,i will buy it and transfer the cash to him immediately,that sounds like the best bet.I will msg you a really good photo still,incase i can not get my hands on the one for sale,but if i can let him know or maybe you could let him know that i will buy it quick enough maybe i can end up with it.I would really feel better just swapping the cable out with another.I will talk back with you tomorrow and again thank you for your time and great help,i really owe you.
Marketplace & Non Working Tab Links
alcapone1130 said:
Wow,Thank you so so much,Can you get me in contact with the guy with the gtab for $55.00,i will buy it and transfer the cash to him immediately,that sounds like the best bet.I will msg you a really good photo still,incase i can not get my hands on the one for sale,but if i can let him know or maybe you could let him know that i will buy it quick enough maybe i can end up with it.I would really feel better just swapping the cable out with another.I will talk back with you tomorrow and again thank you for your time and great help,i really owe you.
Click to expand...
Click to collapse
Here are several link for you
1. XDA Marketplace http://forum.xda-developers.com/forumdisplay.php?f=1321
2. Link to "Wanting to sell" subformum where I found the non working gtab (used forum search for gtablet) http://forum.xda-developers.com/forumdisplay.php?f=476
3. Link to not working gTab http://forum.xda-developers.com/showthread.php?t=1436549&highlight=gtablet.
Take a look at this post & email him to make sure you want it.
Al
aabbondanza said:
Here are several link for you
1. XDA Marketplace http://forum.xda-developers.com/forumdisplay.php?f=1321
2. Link to "Wanting to sell" subformum where I found the non working gtab (used forum search for gtablet) http://forum.xda-developers.com/forumdisplay.php?f=476
3. Link to not working gTab http://forum.xda-developers.com/showthread.php?t=1436549&highlight=gtablet.
Take a look at this post & email him to make sure you want it.
Al
Click to expand...
Click to collapse
Its amazing what a couple of stripped bread ties will doo,lol.I took a bread tie and stripped the paper off of it,cut it to the length I needed and wrapped the remaining wire to one end and pushed the other end of the tie inside the pin hole,lol.It worked like a champ! MY Grab has been up and running for over a month,I just knocked on my coffee table,lol.Thank you for helping me out I really appreciated you trying everything to help me.I am so happy to have it back,now if I can just figure out why I keep seeing black boxes on my games when I play them I will really be doing fine.Thank you again.
Hey all, I'm working on a friend's Verizon V10 (VS990). The flex cable with the actual power & volume buttons is defective. I've scoured eBay and other part sites to find the button assembly. The fingerprint scanner is readily available, but for some reason I'm having a hard time finding the button flex cable assembly. My friend bought the phone secondhand, so he's not sure if he could get LG to fix it without costing an arm and a leg. Does anyone here know of any other good cell phone repair part sites I could check for this cable? Attached is a picture of what I'm talking about. Any help would be appreciated.
Thanks,
DL66
So I answered my own question, apparently. I discovered that the LG part number for this is EAX66848101. I did a search with this part number and found a site in Spain that has the part I need. Sure, it'll be expensive, but still less than LG will probably charge. If anyone else is looking for this part, here's the link to the site I found:
http://www.originalpartsmobile.com/flex-teclado-trasero-lg-v10-h960?filter_name=EAX66848101
darthleland66 said:
Hey all, I'm working on a friend's Verizon V10 (VS990). The flex cable with the actual power & volume buttons is defective. I've scoured eBay and other part sites to find the button assembly. The fingerprint scanner is readily available, but for some reason I'm having a hard time finding the button flex cable assembly. My friend bought the phone secondhand, so he's not sure if he could get LG to fix it without costing an arm and a leg. Does anyone here know of any other good cell phone repair part sites I could check for this cable? Attached is a picture of what I'm talking about. Any help would be appreciated.
Thanks,
DL66
Click to expand...
Click to collapse
Thank you for updating us with very useful info. Some may need it and too many times people are not mindful to be considerate enough to help others when they've solved the problem. Thank you again.
Thanks dude might come handy someday