I bought a Motorola Atrix, Andro 2.2, the U.S. imported, blocked
by AT & T, free plan. I managed to unlock it through IMEI and today
I can use any chip in it. I've made it through the root
Superoneclick and he's installing any application.
Well, before all this explanation, you may be wondering, what
the same problem? The problem is that I'm trying to route my WiFi
access the internet on my laptop (the 3G phone, which happens
TIM uses chip) and I can not connect the router.
When I enter the "Settings - Wireless Network and others - point network
WiFi (router) "it gives the following error" Account is set to point
WiFi network (router) "and asks for me to go to" att.com / mywireless. "
So I installed "Bernacle Wifi Tether" and set up as seen in a
tutorial (can not remember where now) and when I click start, there is the
following error "unexpected error occurred! Inspect the log and try
troubleshooting guide. "
Finally, I installed the "Wireless Tether," and when I did the settings
I click the wireless symbol to connect it gives error and does not open.
Given all that, I'm using you guys! I think there are some
AT & T setting that is preventing my phone to access the wifi
as a router (only the router because I can access the net in
my phone through wifi here at home normally, just can not
route it to the net my notebook). If you guys can help me,
I would be very happy indeed!
Have you tried the wifi fix for sim unlocked Atrix.?
Related
Ok, I looked on the WIKI and searched the site for a solution and was unable to find one.
Here is my problem. I have wireless internet at my house. My access point works fine. My laptop and PS3 connect to with no problem at all. My Touch pro connects to it with no problem. But, after I connect to the WIFI (and verify it is connected) I cannot use it?
I tried to open opera = "site not found" try to open Skyfire = "site not found"
I cant even update my weather while connected to WIFI. So thats my problem. I can connect to WIFI but not use it!
ANY AND ALL HELP WILL BE GREATLY APPRECIATED. Thank you in advance. iko[
anyone....
I'm having the exact same problem...
Coldones said:
I'm having the exact same problem...
Click to expand...
Click to collapse
You and I are not the first. I researched this (in depth) and it is found on a lot of sites, people complaining about it....However, I have yet to find an answer, that is why I came here...these guys can usually solve some pretty complex stuff!
Hopefully someone answers soon......
bump
iko172302 said:
Ok, I looked on the WIKI and searched the site for a solution and was unable to find one.
Here is my problem. I have wireless internet at my house. My access point works fine. My laptop and PS3 connect to with no problem at all. My Touch pro connects to it with no problem. But, after I connect to the WIFI (and verify it is connected) I cannot use it?
I tried to open opera = "site not found" try to open Skyfire = "site not found"
I cant even update my weather while connected to WIFI. So thats my problem. I can connect to WIFI but not use it!
ANY AND ALL HELP WILL BE GREATLY APPRECIATED. Thank you in advance. iko[
Click to expand...
Click to collapse
I have the same problem... ps3s and all. The only difference is my network shows up on my TP but it displays half the signal strength my laptop and my ps3s show.
broche85 said:
I have the same problem... ps3s and all. The only difference is my network shows up on my TP but it displays half the signal strength my laptop and my ps3s show.
Click to expand...
Click to collapse
ok i fix it....very very easy...under the "WIFI" settings there is a box to check...next to the box it says "use IEEE 802.1X Network Access Control" check this box then under that is a choice for "EAP Type" choose the "smart card" connection....also turn off your data connection via the comm manager...for some reason my TP wont let me connect to WIFI when the data communication is enabled....good luck worked for me!
iko172302 said:
ok i fix it....very very easy...under the "WIFI" settings there is a box to check...next to the box it says "use IEEE 802.1X Network Access Control" check this box then under that is a choice for "EAP Type" choose the "smart card" connection....also turn off your data connection via the comm manager...for some reason my TP wont let me connect to WIFI when the data communication is enabled....good luck worked for me!
Click to expand...
Click to collapse
When I go into Settings, the Connections tab, and click on WiFi, I don't see any check boxes at all, let alone one for "Use IEEE ...".
I must be in the wrong menu/place. Could someone please help direct me to the right place?
you'll see the check boxes once you connect to a wifi..i also have wireless internet at my house, and can connect and use my wifi just fine.
try to install some app that block`s data connections from your mobile provider ... nodata for example, you can find a link to it on xda.
set all the other connections to disabled ... and you phone connection to GSM ... not GPRS, EDGE or something else ...
set your wi-fi connection to connect to the internet ... not to work.
this worked for me for a dlink 784 router, now i`m banging my head against a 524 (again DLink) and have the same problem it connects but does not get on the internet. the problem seems to come from the TP, some settings need adjusting but i didnt figure out which one yet ...
good luck
PS: for iko, i think you have your router set on enteprise security, not personal... for personal WPA, WPA2 with a PSK, and TKIP or AES encryption, the "use IEEE 802.1X Network Access Control" is checked and greyed out, and you do not have access to it on the TP
ok i can install all fo the tether apks (obviously not all at once) and they all seem to work fine and my computer recognizes the phones network and the phone shows that its sending data to the computer when talking to it to connect but then says unidentified network no internet access. so they talk to each other but the phone isnt passing on its connection. any idea how i can fix this?
maybe some setting i need to change?
SEARCHED FOR HOURS AND NO ONE COULD FIX THIS FOR ME. WHO WOULD HAVE GUESSED SOME LITTLE KID WOULD NAIL IT.
http://www.youtube.com/watch?v=Y_38AoVtj50
NETWORK AND SHARING>WIRELESS NETWORK CONNECTION>PROPERTIES> CLICK INTERNET PROTOCOL VERSIONS> PROPERTIES> CHANGE TO AUTOMATICALLY AQUIRE IP
REPEAT FOR VERSION 6 ALSO
Running stock, clean install of .12. My Hotspot (which I do pay for, so that isn't the issue) isn't behaving at all. The phone is broadcasting the network and devices can authenticate, but they're not being routed to the Internet once they're in. "Limited connectivity" or "No Internet" statuses on my PC, lack of IP config details on my iPod/Pad.
I called VZW support last night and the guy had me shut the phone off, then he reset something on his end and had me turn it back on again. For an evening it ran like a top. Today I'm right back where I sarted. It *can* work, it just isn't.
Interestingly, when I run Mobile Hotpot, it gives no indication of trouble, but in the Tethering & mobile Hotspot menu in Settings, when i run the Hotspot, I get "Error" showing up in there. Doesn't say what kind of error, no detail/debugging, just "Error."
To recap:
ICS .12, stock
WiFi network ok, Routing not (apparently)
"Error" in settings when Hotspot is on.
Only thing I've seen that sounds anything like this was an APN issue on a different carrier's ICS phones post-update. I'm stumped at this point and like my odds better here than I do calling Verizon again...
I am having the same problem after OTA ICS, I can turn my hotspot on and it says connected to 1 device (my laptop) and when I try to connect to the wifi it takes a while and says "limited connection" and will not work. If I go to my mobile settings it says hotspot...error. usb tethering (internet connection mode) still works but the wifi hotspot doesnt at all, I thought they were supposed to fix this!
I'm on STF-L09 8.0.0.364 and everyday I use mobile hotspot with no problems. Few days ago I tried to use Device List feature to allow only Allowed Devices to connect on my hotspot. After trying this, my PC and iPad couldn't connect anymore to my hotspot. The network appears by default but iPad shows "wrong password" and PC shows "Can't connect to this network". I went back to last configuration but with no success. I have already tried to change network name, password and authentication type but none of the attempts worked. Does anyone have an idea of what to do or know a way to get the mobile hotspot settings back to the original?
Same here.
For no reason wifi hotspot stopped working.
I tried to reset network parameters, to switch between wifi 5GHz and 2.4 GHZ (as found elsewhere), no result.
I installed last update (STF-L09 8.0.0.368), but hotspot still not working, can't connect any device to it.
Any clue ?
Dear User,
again go to hotspot>> device list>>select allow devices to "connect as all devices". Then disable and re-enable hotspot and again try to connect, try to reconfigure wifi in ur ipad, laptop and all. its working tried as u said with my device
I did that once, didn't work. I did it 2 or 3 times more, then it finally worked !
Hotspot is really instable : after some minutes of use, I had to do this again .
But thanks for your help.
It seems like enabling and disabling the Device List turns the Hotspot working back. But every time I want to use Hotspot, I need to do it again. The functionality really is unstable.
Hey, so recently I was having WiFi connectivity issues at my university; I would be able to connect to WiFi on my phone but would have no internet connection. After a variety of attempted fixes I decided the only way I could fix anything (since I can't directly fiddle with the router here) would be a factory reset of the phone. I'm able to do that without any problems up to the point where I'm asked to "Set Internet connection" where I'm presented with a number of WiFis to connect to. I tried to connect to the university WiFi but it's having the same problem as before: it connects but no internet. Okay, at this point I just hit "Next" to get to the next screen just so I can finish setting up the phone, and I'm given a dialog box which reads:
"No Internet
Your phone is not connected to the Internet. Software updates and device protection features will be unavailable until you connect to the Internet.
(Don't Skip) (Skip Anyway)"
No big deal, I just hit Skip Anyway.... the problem is, it doesn't "Skip" anything... it just takes me back to the "Set Internet connection" screen and I can't progress any further, so basically my phone is stuck in limbo, not able to finish setting up for some reason. I've also gone elsewhere and tried connecting to other WiFis that work, as well as trying to hotspot from my PC, and the phone gets hung up on "Obtaining IP address....", thus leading to the same Skip Anyway issue as before.
REALLY need some help as soon as possible, thanks in advance.
What model of v30 do you possess?
Are you rooted? Do you ha e TWRP?