[Q] Help - TG01 General

After the hard reset of my Toshiba Tg01 the first step after reboot is to be the screen allignment. The problem is that i followed the steps ( tap on the screen following the crross ) but nothing. any idea??????????????

Was the screen responding to taps before you did the hard reset ?
- If so then the resistive hardware is OK
- If not that could be a problem
Have you hard reset again to see if that clears the issue ?
Are you certain you are tapping exactly on the X-hair OK ?
Is there any reaction to taps at all - first tap OK but then no response or ... ?
Regards,
Kevin

Related

win2005 NO SERVICE(phone) whats that all about :P

I keep getting the NO SERVICE in the phone balloon, if i put my simcard in a different phone it works like it shuld.
any1 having same probs? and a solution
Yes! Try to Hard Reset. It worked for me.
click on the green phone9send0 button 8)
i tried hard reset but even putting it in bootmode and then hard reset but it dident reset it was back to its last state (so all the prog's i installed where still there) so that was a bit strange
even when i entered the PIN it gave the NO SERVICE err. i tried everyting. all buttons
any other solutions?
thx !
Hard resetting 2005 is different from 2003
press power + camera + record + small hole at the bottom all at once.
you get KIT, registry hive, storage prompts when you do that. Now release all these buttons and boot.
my solution
I had this problem, I solved it by downgrading my radio rom to version 1.08.
Had the same problem in radio 1.18, downgraded to 1.17, works fine now.
any other solutions?
Click to expand...
Click to collapse
How about going back to diamondROM :twisted:

Problem calibrating display

I have just managed to install the erman tmobile stock rom. Now after the first boot i am trying to calibrate the screen but it just does not work. No matter how often i try. I have tried a hard reset but this has not helped either. I didn#t have this problem with any other rom.
Is there a fix for this?
Thanks
Use : Remote Screen Alignment for By Pass Proses Calibrate Screen (Align Screen)

NIKI 100 - CalibrationData key? PLEASE HELP ME

Hi Guys,
please, anyone give me the CalibrationData key(regedit key) for NIKI 100 ?
My actual values are:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1390,1820, 2250,1085, 2360,2590, 550,2430, 505,1190 "
But are very WRONG.. i can't use the touch!!!
Thanks you in advance.
Try to hard reset you device
Why are you cross-posting? It's trashing the board!
BTW:
I answered you in your other trhead ...!
perettigiuliano said:
Try to hard reset you device
Click to expand...
Click to collapse
What can i hard reset HTC NIKI?
Thanks.
Fuzzygs
Hardreset: Start - Settings - System - Clear Storage
or press and holt both phone buttons while you make a softreset till the screen is went white! Answer the question with the mentioned button and thats all!
animelover said:
Hardreset: Start - Settings - System - Clear Storage
or press and holt both phone buttons while you make a softreset till the screen is went white! Answer the question with the mentioned button and thats all!
Click to expand...
Click to collapse
Thanks, but..w ith Hard Reset i delete the ppc user data or ROM data?
Restoring to factory defaults! This includes deleting of user data and some other data, related to your current ROM!
At this moment the ROM is the Mary 6.1.. with a Hard Reset the result is..???
The same after you started your device the first time after flashing the Mary ROM!
I resume the step that i executed:
1)Flashed Mary 6.1 ROM on original TIM ROM (with this ROM the screen not function and the ppc is very slow).
2)After the flash the ppc is more faster and the screen responde but not correct position (very SWRONG!).
3)With:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="2019,2021,3414,3088,3423,924 648,909 646,3097 "
The calibration of screen is better..is only to tune fine.
If apply a Hard reset i restore the ppc before of point 2 (without Calibration Key)?
press the camera button while the center button is down and you will enter the alignment screen directly

Touchscreen Not Responding After usage of hard buttons

As the title says.. Whenever I use the hard key buttons the touchscreen stops responding + at times it randomly decides not to response. Kindly suggest..
Things I have done :
1.) Flashed new radio + ROM
2.) Removed screen protector.
3.) Did task 29 and then flashed a new rom.
Kindly help
Sounds like a hardware failure, which isn't uncommon for the touchscreen - search this forum for more examples.
Warranty or repair are your options.

After reset problem

Helllo everybody,
I have the Leeco cool 1, I just resetted it and now it has finished.
The problem i'm facing right now is the touchscreen, it had a line in the bottom of the screen that doesn't work due to a fall. and now I must click next after choosing the language to complete the first setup installation of the cellphone.
I can't manage to do anything else , I can't rotate or skip or anything at moment, i just need to pass this step and then i'll be able to rotate the screen.
Is there any solution, please ?
Thanks.

Categories

Resources