Edit: I disabled handscent from being my default messaging app and now they're all starting to show up.
I woke up this morning to two missed calls, both of which had left voicemails and realized that I didn't have a voicemail notification nor a visual voicemail. The only way I knew was because I had received a text from Handscent telling me I had a VM. I tried sending a VM already to [email protected] but nothing happened.
Any idea on what might be going on? I got my friend to call me a few times and leave VM's, and I checked to make sure that my WiFi was off and my internet was working but I still didn't get any proper notifications. I had it work before though, wondering if it's Handscent that's causing the issue?
Related
I'm using the TG01 and I keep getting a false positive voicemail indicator on the Titanium Home Screen. Calling and leaving a voicemail and deleting it does not work, calling ATT to have my voicemail reset does not correct the problem.
When you call into the VM ATT service from the phone to check your messages, it sends a VM control SMS to the phone, indicating that it is not being properly processed. Has anyone else seen this, or know of a problem besides a master reset - which is annoying b.c. this is the second time this has occured in three weeks.
Thanks!
Search for the tool HushSMS. I Had the same problem and did resolve it with HushSMS.
Isn't this the opposite of what we want to occur though? We are trying to hide network messages from the device not from those we send to.
No, with HushSMS it's possible to send a message to your own phone, that changes the SIM Setting and deletes the voicemails that are not there but which WM shows you.
Thanks that worked!
You're welcome
Although...on second thought - this makes it dissapear but does not prevent it from occuring again - was this the same result for you?
No, it occured never again.
Did it occur again at your phone?
Yeah it occurs again everytime I get a VM, bummer. What type of SMS did you send with Hush SMS?
Is there a way to officially set up ATT VM on an unlocked phone that I'm not following correctly?
The rom update Toshiba released recently did not correct this either as I had hoped. Any thoughts as to why these control SMS and MWI don't process correctly?
Removing the indicator with a Ping0 message in HushSMS is a workaround to parse the indicator but does not prevent it from occuring agian.
Anyone know how to fix this? Getting really irritating honestly.
Same here...
I am on Virgin mobile in the UK and I have the same problem, I got a voicemail this morning and I have deleted the voicemail but it still shows on my phone.
I have rebooted and its still the same
I have to use HUSH SMS to clear my voicemail indicator.
For me it's actually a problem on my sim card. After a flash there is this residual text message that says i have a voicemail. It's wierd.
Anyway, it's a MWI Disable command with HUSH SMS
Click Send MWI, Voice, Deactivate.
Also, you can mess with your windows mobile enabled friends by sending an enable
Check this out http://http://forum.xda-developers.com/showpost.php?p=1163312&postcount=1
Im on Miuiwiz 1.1 and everything was cool, then i flashed the mms patch and i started receiving 2 of every message. I checked to make sure my other notifications were turned off, i downloaded chompsms and turned off everything else and chomp gets 2 of every message. If i turn chomp off and use the stock mms it still has double messages. Ive done some research and ive seen it just something that happens on the carrier end. I can try wiping and starting over but i figured id ask here first.
Thanks
mike
Has anyone noticed an issue with voice calls going directly to voice-mail if they come through at the same time as sending or receiving texts?
Background:
I have G-voice installed and running strictly as my voicemail service. This works out well for me as it will send me an email notification of a missed call whereas without it if I have no coverage and someone calls me I would never know about it.
I am a Firechief for an oil refinery and I use the phone as my fire call-out pager too. Its rather important that I get my calls.
I have noticed in the past that people would tell me they called but it went to my voicemail. After installing and using G-voice for voice mail, sure enough when they told me that, I would get a missed call notification from G-voice.
We use a call-out system called Send Word Now that will send me a voice call and a text message together when activated. Apparently is at exactly the same time because when I tested it I would only ever get the text mesage and a missed call notification.
My Question:
Has anyone else noticed this and figured out why? It would seem that with a 4G connection and all the data bandwidth available the phone should have no problem doing both. In fact, I can get plenty of text mesaages or incoming calls if I am already talking on the phone.
Just as an update to my own thread in case anyone searches this oddity. The messaging center today informed me that they know of the issue and ALL phones and providers will act the same way. As in, if you get an oncoming call at the same time you are sending or receiving a text the call will go straight to voicemail.
Sent from my SGH-I777 using XDA
Hi. I'm running CM 10.1-20130117 nightly on my Fascinate. For the most part it works great as a daily driver. The only major issue I have is I don't get voicemail notification.
It acts as if it only checks for voicemail once when it powers on.
If I have voicemail when I reboot the phone, I get the notification, and it stays on even after the message is cleared. If I reboot the phone again the notification goes away, but doesn't come back on if I receive new voicemail.
I've had this issue across multiple nightly builds. Other notifications such as email and text work correctly.
In settings, I've tried selecting and deselecting message wait indicator. Service is set to My Carrier, and voicemail number is *86. I haven't loaded any voicemail apps, and I've also cleared out all voice messages.
Can someone help me out?
This is a common issue for 4.2.2 ROMs on older Android phones. There is no known fix and I have experienced it on both a Droid Incredible and Samsung Fascinate on Page Plus (a Verizon MVNO).
Firestormf said:
Hi. I'm running CM 10.1-20130117 nightly on my Fascinate. For the most part it works great as a daily driver. The only major issue I have is I don't get voicemail notification.
It acts as if it only checks for voicemail once when it powers on.
If I have voicemail when I reboot the phone, I get the notification, and it stays on even after the message is cleared. If I reboot the phone again the notification goes away, but doesn't come back on if I receive new voicemail.
I've had this issue across multiple nightly builds. Other notifications such as email and text work correctly.
In settings, I've tried selecting and deselecting message wait indicator. Service is set to My Carrier, and voicemail number is *86. I haven't loaded any voicemail apps, and I've also cleared out all voice messages.
Can someone help me out?
Click to expand...
Click to collapse
Maybe you should install a voicemail app... I wouldn't go with verizon's visual voicemail since you gotta pay a monthly fee to access your messages. Go with Google Voice. It's free, easy to set up, allows access from the app/web, works with messages same as you would with emails, transcribes recordings... did i mention its free? Went with google voice a long time ago n never looked back... verizon's a joke.
I know it's an old post, but AOKP worked for me for the VM notification.
Hi folks,
Completely stock, unrooted, fully up to date Pixel 6 purchased from Google, running on AT&T in the US. Yesterday Visual Voicemail was working fine. Today, woke up to new icons for both Messages and the Phone app on my home screen. I had heard that new versions with new icons were rolling out, no big deal.
However, during a meeting my phone rang, and I didn't get a visual voicemail of the transcript. After the meeting I went into the app and it said something like "Visual Voicemail isn't working. Call voice mail to set up."
I called voicemail and entered my password code (manually, why didn't it remember my password) but there was nothing in there about VVM.
Any idea what's going on here?
I may have fixed it by turning off VVM, then turning it back on and re-enabling transcription. It took a few minutes hung at the "activating" stage, but then seemed to clear up. I left a message, and it got transcribed and I can see this in the app now.
However, I think they monkeyed with the layout a bit. And the shortcut on my homescreen to the VVM window is gone. Why do they change things that work fine already?