Related
I can't connect the Atrix to the Moto Phone Portal using the USB. Just curious if there is a fix to this? Once the browser is launched (it doesn't matter which browser, IE, Firefox, Chrome) it doesn't connect. USB connection is set to 'Motorola Phone Portal' and Moto Phone Portal app says its 'running on on USB..."
Not sure what is going on- connects fine using Wi-Fi... just annoying that it won't connect with USB. Any help is appreciated?
Thanks,
M
are you on a mac? I think it requires the MotoHelper app on a pc - part of the PC drivers.
I had the same issue but I also couldn't connect via wifi. So... I turned off the debug under applications and then it worked fine. But haven't had time to try it with the usb but it may help.
I am on a PC and have the MotoHelper installed, but it still didn't work. Also I didn't see a debug under applications, haven't done any modifications to my phone (not sure if you need to modify to debug or not, but I couldn't find it).
Maybe its a driver issue with my dell...
mcmackk said:
I am on a PC and have the MotoHelper installed, but it still didn't work. Also I didn't see a debug under applications, haven't done any modifications to my phone (not sure if you need to modify to debug or not, but I couldn't find it).
Maybe its a driver issue with my dell...
Click to expand...
Click to collapse
Not a Dell issue. I have Dell running Win7 64bit and it works fine. Try to manually reinstall Motohelper. Also, under you Windows Start button you should have:
START>ALL PROGRAMS>MOTOROLA>Motorola Drivers>Motorola Driver Reinstaller.exe.
Run this CLEAN and REINSTALL and Selct START - see my attached. This will reinstall everything associated with the drivers and Motohelper. Reboot Phone and PC and then replug phone into PC and select USB with Motorola Portal.
Same Problem
I've tried all these things and mine keeps switching back to USb Mass Storage. If I switch it back to Motorola Phone Portal, it will give me the address for my browser and it will actually pull up the Portal on my computer but then the phone will switch back to USB storage and I can't go any further on the computer. I've rebooted the computer and the phone and nothing helps. Any help
I tried all those things as well, but still no luck. However, my phone stays on Moto Phone Portal as USB connection, but just won't connect/load the phone portal in the browser(s) when using the USB cable.
Atrix A said:
I've tried all these things and mine keeps switching back to USb Mass Storage. If I switch it back to Motorola Phone Portal, it will give me the address for my browser and it will actually pull up the Portal on my computer but then the phone will switch back to USB storage and I can't go any further on the computer. I've rebooted the computer and the phone and nothing helps. Any help
Click to expand...
Click to collapse
mcmackk said:
I tried all those things as well, but still no luck. However, my phone stays on Moto Phone Portal as USB connection, but just won't connect/load the phone portal in the browser(s) when using the USB cable.
Click to expand...
Click to collapse
You should uninstall the Motorola Media Sync from the PC. I kinda like the software, but it does it's own thing to much with out giving me control. I have spoken to Motorola 2nd level support, but the were no help. They told me to ignore it or uninstall it. I uninstalled it. I left the Motorola drivers installed. If you reinstall the drivers it'll ask you to reinstall the Media Sync - say NO.
Once the Media Sync is gone, then the Portal will not auto load and you can have control of the USB settings from the taskbar.
I had a similar issues
....First, Moto Phone portal does not work on Chrome (insert IP address into IE or Firefox)
If you still have problems...
On phone, from home screen
select Apps drawer
select Phone Portal
select menu
select Settings
select Secure login
uncheck Enable login
did anyone come up with a fix for this? i have tried everything in this thread with no success.
USB Cable
I had this problem as well, just happened to have a few extra Micro USB Cables around. I found that the phone will work with some Cables and have problems with others. If you can try a different USB cable give it a shot.
It works just fine with Chrome.
The USB cable that came with my phone does not work.
As per the heading, I abandoned carrying a USB memory stick years ago, instead I have a 16GB memory card in my phone and carry a 15CM micro USB to USB cable in my pocket, this way I can use my phone as a USB drive when ever I need it, but I have a problem with my SGS 2
1) the drive seems to randomly disconnect itself whether or not it is transferring data
2) the option to ask me what I want to do every time I connect my USB cable is missing, forcing me to go to settings--> wireless and networks---> USB utilities, just to use my phone as a USB drive ....... VERY IRRITATING
does anybody else use this feature, if so what are your findings ?
I have a similar problem, it will disconnect randomly but also when trying to update and some times when trying to transfer files. I do however get the option to view files pop up when I plug it in. I made a post earlier but no one replied, hopefully it can be fixed easily. I wouldn't really know where to start though
Sent from my GT-I9100 using XDA App
Um, there must be something wrong with your phone. I have not done anything special to use my SGS2 as a USB drive. It's litterally plug it in and away you go.
I just plug it into the computer, the phone says something like MTB in progress, Kies connection or whatever.
Then I get the option to view all files and folders in My Computer (windows 7).
No problems whatsoever.
jeanclaudevandamme said:
Um, there must be something wrong with your phone. I have not done anything special to use my SGS2 as a USB drive. It's litterally plug it in and away you go.
I just plug it into the computer, the phone says something like MTB in progress, Kies connection or whatever.
Then I get the option to view all files and folders in My Computer (windows 7).
No problems whatsoever.
Click to expand...
Click to collapse
I don't normally use the "MTB in progress" version as the majority of computers I plug it into do not have kies loaded.
I use the standard USB drive option in settings
Bump
Anyone else having this issue
ice_coffee said:
Bump
Anyone else having this issue
Click to expand...
Click to collapse
Default usb connection is Kies start Kies plug phone in and connects on SGS2
USB Mass storage mode has always required user to click on USB connected in top scroll down bar .Select copy files to phone >>>.
jje
ice_coffee said:
As per the heading, I abandoned carrying a USB memory stick years ago, instead I have a 16GB memory card in my phone and carry a 15CM micro USB to USB cable in my pocket, this way I can use my phone as a USB drive when ever I need it, but I have a problem with my SGS 2
1) the drive seems to randomly disconnect itself whether or not it is transferring data
2) the option to ask me what I want to do every time I connect my USB cable is missing, forcing me to go to settings--> wireless and networks---> USB utilities, just to use my phone as a USB drive ....... VERY IRRITATING
does anybody else use this feature, if so what are your findings ?
Click to expand...
Click to collapse
Hi,
i dont have any USB connection issues, loaded my 32Gb SD and the internal Storage full and i do use a lot the Mass Storage funktion, somtetimes the connection lasts for hours, so (Win7 32Bit).
Totally agree, the settings--> wireless and networks---> USB utilities ... tapping is verry annoying. Have to do this many times a day
Maybe someone knows an solution how to set the "Mass Storage" connection as an default?
Greetz Tokl
try multimount off the market.
You need to enable usb debugging (to prevent the keis rubish launching).
then anytime you want mass storage mode, click the multimount widget.
-- Actually just enabling USB debugging seems to set mass storage mode as default.
I have the same problem but I think it's the problem of the USB port on your PC. I plug the phone in another port and everything is ok now. You can try this on another PC or another port and you'll see. Hope this helps
ice_coffee said:
As per the heading, I abandoned carrying a USB memory stick years ago, instead I have a 16GB memory card in my phone and carry a 15CM micro USB to USB cable in my pocket, this way I can use my phone as a USB drive when ever I need it, but I have a problem with my SGS 2
1) the drive seems to randomly disconnect itself whether or not it is transferring data
2) the option to ask me what I want to do every time I connect my USB cable is missing, forcing me to go to settings--> wireless and networks---> USB utilities, just to use my phone as a USB drive ....... VERY IRRITATING
does anybody else use this feature, if so what are your findings ?
Click to expand...
Click to collapse
1) Doesn't happen on mine. Have you tried using USB ports on other computers as it could be due to a particular USB port on a particular computer doesn't supply enough current?
2) It's irritating.
hazart said:
2) It's irritating.
Click to expand...
Click to collapse
So you don't have a usb icon in the notification area? Otherwise, you just have to select it to enable usb storage.
thelestat said:
try multimount off the market.
You need to enable usb debugging (to prevent the keis rubish launching).
then anytime you want mass storage mode, click the multimount widget.
-- Actually just enabling USB debugging seems to set mass storage mode as default.
Click to expand...
Click to collapse
Thanks Mate!
USB Debugging prevents Kies and bring up the Mass Storage directly
One more (very small, but annoying) issue of the SGS2 solved
Greetz Tokl
When I enable debugging mode, I does indeed turn on mass storage mode and it works. However, every time I unplug the phone it reboots. I do press the disconnect USB drive button and I do eject it on my PC. It still crashes. Does anyone else have this problem?
ice_coffee said:
...
the drive seems to randomly disconnect itself whether or not it is transferring data
...
Click to expand...
Click to collapse
This happened to me today, and the reason was the Android browser application running in background. Using the task manager I killed browser and then I faced no problem thereafter.
So, to sum up I guess an application running in background might be the reason.
Hope this helps somebody...
It's funny you should say that, as I hardly ever get that problem anymore, and I mostly use dolphin hd browser now
My sgs2 connects to odin via download mode, but wont connect to mass storage.....how do i resolve this?
Sent from my GT-I9100 using Tapatalk now Free
rockz1991 said:
My sgs2 connects to odin via download mode, but wont connect to mass storage.....how do i resolve this?
Sent from my GT-I9100 using Tapatalk now Free
Click to expand...
Click to collapse
If it is connecting in download mode then the cable is perfect. Flash the firmware again to check if it is working or not
Sent from my iPhone using Tapatalk
Jeetu said:
If it is connecting in download mode then the cable is perfect. Flash the firmware again to check if it is working or not
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
This was an issue since i had gingerbread. I upgraded to ics, didmt solve. Jelly bean, nope! I flashed neat rom, still the same.
The only it gets connected is when i turn off both my laptop and phone, connect usb, turn both on. Only then it gets connected to mass storage
Sent from my GT-I9100 using Tapatalk now Free
please go in settings
more settings
USB utilities... click connect storage to pc and then plug the cable...... try if this default stock method works......
Just ran into a problem with this. Have had my Note for a few days now and have transferred files to and from the PC without issue while connected through USB. Now all of the sudden I'm getting this error when trying to drag and drop .zip files...
Cannot copy Item
The device has either stopped responding or has been disconnected.
I tried with USB debugging activated and deactivated but to no avail. Any thoughts on why this might be and why it just stopped working as it was?
------------------------------------------------------------------------------------Thanks Rocket42!
Rocket42 said:
Here's how to connect the Galaxy Note to PC and access the memory card. (a removable disk file directory will appear on your PC, separate from internal memory of your phone.
- From idle mode, select Application list.
- Then tap on Settings
- Tap Wireless and Network
- Select USB Utilities
- then select Connect Mass Storage to PC.
Then connect your Galaxy Note to PC with the USB cable or multifunction jack
When connected Touch USB connected or Turn on USB storage
- A USB icon will appear in the top left Notifications area of the screen.
- On the PC, go to My Computer then locate the newly file drive directory that appears as your Galaxy Note mass storage. You can now have the access to browse, sync, copy or transfer files that you want from your Galaxy Note microSD card to your PC or laptop.
Click to expand...
Click to collapse
Did you try changing USB ports? If you did the cable might be bad.
omenz said:
Did you try changing USB ports? If you did the cable might be bad.
Click to expand...
Click to collapse
I added to the OP that the issue is only with .zip files, everything else transfers fine.
Sent from my SAMSUNG-SGH-I717 using xda premium
have you tried right clicking on the .zip and copy then paste? Or "send to"
Rocket42 said:
have you tried right clicking on the .zip and copy then paste? Or "send to"
Click to expand...
Click to collapse
Yes, get the same error message. This is really odd, I've never ran into anything like this before. I guess I'll try wiping the data and starting fresh again.
Sent from my SAMSUNG-SGH-I717 using xda premium
Update...
I've since wiped the device (factory reset) and am still unable to drag and drop, cut and paste, or send to my device, .zip files.
Sent from my SAMSUNG-SGH-I717 using xda premium
By default, your phone is connected using MTP only. MTP stands for Media Transport Protocol. As the name indicates, it will only allow media files to be copied over.
You will need to switch to Mass Storage mode in order to copy any other file type. Check your USB settings, there should be one to enable Mass Storage mode on USB.
That is weird but this is what i have always done...ON my Infuse for zips...
from pc to phone : right click file/ send to: pick what drive of int sd..
from phone to pc: right click file / copy/ paste.
Next question: Are you mounted correctly??
EDIT: duh! What they said above: I just asumed you were in mass storage mode
foxbat121 said:
By default, your phone is connected using MTP only. MTP stands for Media Transport Protocol. As the name indicates, it will only allow media files to be copied over.
You will need to switch to Mass Storage mode in order to copy any other file type. Check your USB settings, there should be one to enable Mass Storage mode on USB.
Click to expand...
Click to collapse
Appreciate the response! What's weird is I never changed anything as far the USB settings go, it just suddenly stopped allowing me to move the files over.
When I get back to my PC to give it another go, where might that setting be located in the Note? I haven't seen the setting you're referring to in my device for mass storage mode.
Really appreciate the help.
Sent from my SAMSUNG-SGH-I717 using xda premium
Pandemoniumone said:
Appreciate the response! What's weird is I never changed anything as far the USB settings go, it just suddenly stopped allowing me to move the files over.
When I get back to my PC to give it another go, where might that setting be located in the Note? I haven't seen the setting you're referring to in my device for mass storage mode.
Really appreciate the help.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
hmm I will have my Note in hand tomorrow but on Infuse go to/
settings/applications/ USB settings....BUT tha is for Infuse but i imagine it is somewhat similar.
Rocket42 said:
hmm I will have my Note in hand tomorrow but on Infuse go to/
settings/applications/ USB settings....BUT tha is for Infuse but i imagine it is somewhat similar.
Click to expand...
Click to collapse
I'm only seeing Settings / Applications / Storage on the Note. Once I'm in the Storage setting, I don't see an option for Mass Storage Mode.
Sent from my SAMSUNG-SGH-I717 using xda premium
Pandemoniumone said:
I'm only seeing Settings / Applications / Storage on the Note. Once I'm in the Storage setting, I don't see an option for Mass Storage Mode.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Does it give you a prompt upon connecting usb? Otherwise, after connecting USB, pull down the notification bar, and look for a "USB connected" item. If it's available, click it, and "connect usb storage."
Sent from my Galaxy SII
yeah, since i don't have my note in hand yet i can't really help any further...but on Infuse when in settings i have checked "always ask" then when i connect to PC i drop down noti bar and hit connect.
EDIT: i just googled and found this..
Here's how to connect the Galaxy Note to PC and access the memory card. (a removable disk file directory will appear on your PC, separate from internal memory of your phone.
- From idle mode, select Application list.
- Then tap on Settings
- Tap Wireless and Network
- Select USB Utilities
- then select Connect Mass Storage to PC.
Then connect your Galaxy Note to PC with the USB cable or multifunction jack
When connected Touch USB connected or Turn on USB storage
- A USB icon will appear in the top left Notifications area of the screen.
- On the PC, go to My Computer then locate the newly file drive directory that appears as your Galaxy Note mass storage. You can now have the access to browse, sync, copy or transfer files that you want from your Galaxy Note microSD card to your PC or laptop.
The Froyo phones like Captivate and Infuse work slightly differently.
On my GS2, the setting is hidden in Settings->Wireless and Network->USB Utilities, tap the button 'Connect storage to PC' then connet your USB, you will get your phone connected as 'Mass storage mode'. You will know you are in mass stroage mode when your phone (and its microSD card) shows up as a flash drive with a drive letter. In MTP mode, your phone does not show up as flash drive. MTP mode allows audio files, video files, all the image/picture files. But not other file types.
Rocket42 said:
yeah, since i don't have my note in hand yet i can't really help any further...but on Infuse when in settings i have checked "always ask" then when i connect to PC i drop down noti bar and hit connect.
EDIT: i just googled and found this..
Here's how to connect the Galaxy Note to PC and access the memory card. (a removable disk file directory will appear on your PC, separate from internal memory of your phone.
- From idle mode, select Application list.
- Then tap on Settings
- Tap Wireless and Network
- Select USB Utilities
- then select Connect Mass Storage to PC.
Then connect your Galaxy Note to PC with the USB cable or multifunction jack
When connected Touch USB connected or Turn on USB storage
- A USB icon will appear in the top left Notifications area of the screen.
- On the PC, go to My Computer then locate the newly file drive directory that appears as your Galaxy Note mass storage. You can now have the access to browse, sync, copy or transfer files that you want from your Galaxy Note microSD card to your PC or laptop.
Click to expand...
Click to collapse
You my friend are the man! Thank you soo much for the help, found the setting! Not sure why my Google searches weren't yielding the same information
Can't thank you enough for the help, very much appreciated
Sent from my SAMSUNG-SGH-I717 using xda premium
YOu are very welcome....so you don't see it under wireless and network/usb utilities?? How can that be?
And yes, very excited for tomorrow. Then I will be of more help. If I go to bed now tomorrow will get here quicker ...right? lol
Rocket42 said:
YOu are very welcome....so you don't see it under wireless and network/usb utilities?? How can that be?
And yes, very excited for tomorrow. Then I will be of more help. If I go to bed now tomorrow will get here quicker ...right? lol
Click to expand...
Click to collapse
Edited my post, the info you discovered worked beautifully
Sent from my SAMSUNG-SGH-I717 using xda premium
Pandemoniumone said:
Edited my post, the info you discovered worked beautifully
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Awesome!!!!!!!!!!!! Glad i could help.
Thanks for the info. I noticed this problem the other day, and couldn't find a setting. However software data cable, an app in the market will let you transfer files easily thru ftp.
Sent from my SAMSUNG-SGH-I717 using xda premium
i renamed the file to file.zip.jpg on my computer and transferred it and then renamed when it was copied to the phone.
So I got my SGS3 yesterday and noticed that the Android File Transfer app won't work, which used to work well when I owned a Galaxy Nexus. I tried it on 2 different Macs and it won't work on neither. The app does not recognize the phone being connected.
When I connected it on windows (bootcamp, same Mac) it was recognized, so it's not a hardware fail, it's a software bug.
My Q is, has anybody successfully managed to use the Android File Transfer app together with a Galaxy S3.
Thx, all the help greatly appreciated.
EDIT:
I just tried setting the USB Connection mode to Camera (PTP) and Android File Transfer now sees my phone. Everything is fine.
But, DAMN YOU SAMSUNG, code more carefully!
Thanks! This helped me out as well! Was worried something was wrong with my new phone .
enabling camera/PTP mode for usb connection
Hi, I am struggling with this problem of AFT not working with samsung S3. Could you elaborate on how and where to make this change in USB setting - is it on the camera or macbook pro?
aluvathingal said:
Hi, I am struggling with this problem of AFT not working with samsung S3. Could you elaborate on how and where to make this change in USB setting - is it on the camera or macbook pro?
Click to expand...
Click to collapse
On your phone, when connected to the AFP program on your mac, you'll see a USB symbol in the notification area. Pull it down and you'll see it says something like 'Connected as media device' and it'll give you options underneath that to change it. Select that and you'll get to a settings page which will allow you to set your phone as a media device ((MTP) or as a camera (PTP) - do the latter and it should work fine.
I have to say, I love this phone but am not overly enamoured with the mac syncing aspect of it. Most apps in the store are flaky at best or don't work at all, TBH. Using the above method, I've managed to get my media over to the phone by dragging/dropping from iTunes and iPhoto.
Problem is, I still can't find a way for my computer to - reliably - see my phone as a camera when I plug it in e.g. invisible to iPhoto and Image capture.
If you find a way around my problem, please post it up. HTH.
get an app called airdroid (xfer via browser) or file expert & use a FTP program to transfer files from your Mac to the S3
I was going to say that it was another way that Apple is trying to boycot Samsung's phones along with all the suing going on lol.
RMXO said:
get an app called airdroid (xfer via browser) or file expert & use a FTP program to transfer files from your Mac to the S3
Click to expand...
Click to collapse
Thanks for that. Had a look at Airdroid and it seems really slick. Pity though, as it has issues with external storage.
Never mind, I'm dragging/dropping stuff from iPhoto/iTunes to folders which I the keep in sync with CheetahSync. It's all a bit inelegant, but it does the job for now.
hey guys, i'm having an issue with the file transfer. Did what the OP stated above and I can see both internal memory and SD, but when i tried to drag and drop from Finder it is giving me an error, saying my screen is locked (even when it isn't) and asking me to reconnect. anyone else have this problem? for now i'm transferring using File Explorer but its a pain in the ass. thanks!
EDIT: really weird, first file i tried was an mp3 and it kept giving me an error, now i'm moving an avi and looks like its working. apologies
Still having trouble
I'm having serious trouble with AFT and tried what's been suggested here but it's still not working for me.
I've installed AFT on my MacBook (OS X Lion).
All that happens is in all tries is that when I plug in the S3, AFT simply says:
"Could not connect to device
Try reconnecting or restarting your device"
I tried both with no luck. I tried it with selecting Camera (PTP) mode and then with Media device (MTP) mode. No luck. I tried both with and without "USB debugging" selected. No luck. I tried reinstalling AFT. No luck. Restarting my MacBook. No luck.
Any ideas?
Don't connect it its mtp connect it as a camera
Sent from my GT-I9300 using XDA
Just a heads up. Installing AFT on my macbook air caused my usb to Ethernet dongles to stop working. AFT had to be removed to fix them. Applecare are aware and IIRC blame Google.
Sent from my GT-I9300 using Tapatalk 2
omgbuffguy said:
Don't connect it its mtp connect it as a camera
Sent from my GT-I9300 using XDA
Click to expand...
Click to collapse
You're right as it doesn't seem to recognise the S3 at all when on MTP but AFT starts up each time I select PTP (i.e. my Mac recognises it when in the Camera mode) but I just end up getting the "Could not connect to device, Try reconnecting or restarting your device" message.
Strangely enough AFT needs the phone to be in camera mode to work.
But KIES for OSX needs the phone to be in MTP mode. I couldnt get wireless kies to work (but didnt try all that hard either)
well we've found another reason never to buy a mac
i dont have an s3 but i was googling this issue, i havent got a samsung device on ics working on my mac yet, my tf101 tablet just decided to work today after numerous errors about it not being connected.
AFT used to work, no longer does
Hi
I had this problem when I just got my Galaxy S3 at the end of May, and switching the connection mode to camera (ptp) did the trick. Now, however, regardless of the connection type I have chosen or whether or not I have enabled debugging, I cannot use AFT. At no point does it recognize my device, it just keeps telling me "No Android device found. Please connect your Android device with a USB cable to get started." I have reinstalled the program and still no luck.
Further info: I'm running 10.7.4 on an early 2011 15 inch MacBook Pro
Please help
Samsung changed something in firmware LFB that doesn't allow AFT to connect in MACs anymore.
Sent from my GT-I9300 using Tapatalk 2
tanseerj said:
Samsung changed something in firmware LFB that doesn't allow AFT to connect in MACs anymore.
Click to expand...
Click to collapse
Yeah, MTP never worked for me on my Macbook, while PTP worked as a workaround until LFB (and later). With LFB changing to PTP (by default) pops up Image Capture, which, if everything worked as it should, is what you'd expect I suppose. The problem is that Image Capture doesn't find any pictures on the device even though it recognises that an I9300 is connected - and Android File Manager now doesn't work in either MTP or PTP mode.
So I am not the only one not being able to transfer files using AFT? Or has someone figured it out?
Well I run KIES now and open the file browser that way. The only way I could make work on OSX. On windows I have no problems just connecting it and accessing.
I have this problem two samsung please fix this
Sent from my GT-I9300 using xda premium
I need a way to transfer large files, 700mb+, from my hox+ to my Iconia. Problem is I'm on cellular data, so something like Wi-Fi file transfer would be out of the question. I tried using Bluetooth file transfer, but it takes ages, and always fails anyway. My hox+ is rooted but the Iconia isn't, and it's running android 3.2 if that's at all relevant. thanks in advance ladies/gents.
Do you have a computer.
I have a two, but this phone is completely incapable of connecting to either via usb. neither computer even acknowledges my phone is connected to it.
NoobDude said:
I have a two, but this phone is completely incapable of connecting to either via usb. neither computer even acknowledges my phone is connected to it.
Click to expand...
Click to collapse
I have had issues with this coming from a HTC Desire and found the only way to get my PC to see the phone correctly is to turn on USB Debugging on and the moment I connect the phone to the PC I have to unlock the screen otherwise all I get is a blank window. (Once the drivers have installed)
Do you have drivers installed?
I've installed every driver I can find pertaining to mtp, htc, android, etc. I honestly think maybe there's something wrong with the phone, but then again when I "install hardware" on Vista and install all the drivers that way,I still get a code 10 (cannot connect).
What about ADB? If so you can transfer to computer with it.
my phone will not connect via usb, to transfer files I use web sharing. but that isn't feasible to transfer from phone to tablet, unless I'm on Wi-Fi. I need a way to do it when I'm away from home and on cellular data.
Are you using windows XP? If so, you must install windows media player 11 / 12 so that your pc will recognize your phone as a usb mass storage device and download and install the latest HTC Sync Manager, just google it.
Hope it helps.
Best regards.
Pushu.X
Sent from my HTC One X+ using Tapatalk 2
Well i finally figured out why my phone wouldn't connect via usb, because the phone itself was BROKEN! Got a new one under warranty and everything is working perfect! Thanks for all the help guys! Its time to get rooting, again!
Hoy can use Airdroid from the play store
Sent from my HTC One X+ using xda app-developers app
thanks for the advice, but airdroid uses data. it's handy if you're on Wi-Fi though.