Hi everyone, i'v a custom ROM on my SGS2 i would change my baseband 'cause i'm having some issue. I would install H3G bb (that's my operator) and i'v the official H3G ROM with NEKD5 baseband, i'v extracted the "modem.bin" but i'f a create a .tar from this file odin can't flash it... How can i create a flashable .tar from this modem.bin? Thanks everyone!
In Odin, you select your modem.bin into phone select area file and you start the flay processing... No need to create a tar file.
bgn9000 said:
In Odin, you select your modem.bin into phone select area file and you start the flay processing... No need to create a tar file.
Click to expand...
Click to collapse
Lol... at least i'v created the .tar and flashed it as PDA.. thanks anyway ^^
Related
Hi, im new to Galaxy Tab 10.1
Yesterday I made a mistake and flashed a wrong kernel so I lost my 3G on my tab.
Now i have downloaded the european stock ROM from www.samfirmware.com for my tab and I don't know how to flash that files. In the downloaded zip file is a password protected tar file and in this there are some *.img files.
My problem is, with Odin i can't flash *.img files... How do i flash the stock ROM to my tab?
Thanks for your support.
re-stock
There is a very good guide and all the files you need located here: http://p7510.teamovercome.net/?page_id=18
Hope this helps.
Thanks man, you saved my life
You must just load Odin with default settings an load the .tar file on the PDA button. Then start flashing and everything is going right...
A few month's ago I flashed an official android 2.3.6 rom onto my phone. I'm not a developer but had no problems flashing the new rom onto my phone with a tutorial. However, I want to flash back the branded firmware (BELL-PDA: UGKG2 Phone: UGKG2 CSC: BMCKG2) which I have already downloaded. When I read intratech's post on how to flash, the file extensions for the branded rom files do not end in .tar or .md5. The files I have through extraction are:
cache.img
factoryfys.img
modem.bin
zimage
Hence, I am unable to flash through Odin due to these file extensions. What exactly do I need to do?
Knocturnal88 said:
A few month's ago I flashed an official android 2.3.6 rom onto my phone. I'm not a developer but had no problems flashing the new rom onto my phone with a tutorial. However, I want to flash back the branded firmware (BELL-PDA: UGKG2 Phone: UGKG2 CSC: BMCKG2) which I have already downloaded. When I read intratech's post on how to flash, the file extensions for the branded rom files do not end in .tar or .md5. The files I have through extraction are:
cache.img
factoryfys.img
modem.bin
zimage
Hence, I am unable to flash through Odin due to these file extensions. What exactly do I need to do?
Click to expand...
Click to collapse
Instructions say do not unzip the single downloaded file past the tar file to the internal components .
jje
In that case it's a .exe file.
In that case it's a .exe file.
Edit: Ok, what I was doing was extracting the file by right clicking. Now I indeed have a .tar file, which I have done the same with for the Kernal file I also downloaded from intratech's list. However, don't I need 3 files to complete the flash with Odin?
Where is it from this file their should be instructions .
http://forum.xda-developers.com/showthread.php?t=1113928
first page from the mans instructions .
27/05/2011
1. I have changed the format with which I compress the archives. They are now .7z self-extracting files that have .exe at the end. This is because this compresses the files more and so makes for faster upload and downloading and also makes it easier for you to extract the package. Just double click and it will extract the .tar package for you without the need to use any program to unpack.
The instructions do not mention three files .
Its one file with all files inside....
Just flash the .tar in pda and everithing will OK...
cache.img - factoryfys.img---->Its your bell PDA UGKG2
modem.bin--->Its your Phone UGKG2
zimage--->Its your kernel
cheers
Thank you for clearing that up for me.
Had this same problem but i just removed the md5 extension and voila. Tar file ready to be flashed
Also make sure you unzip it with 7zip
Sent from my GT-I9100 using Tapatalk
I'm having the same problem.. and I feel pretty stupid because even after reading your post, I still can't figure it out..
hello
i have a question please
i have some modems in .zip that can be flashed by CWM
now , i managed to get a file called modem.bin in a firmware made specifically for my carrier ( carrier branded ) . i wanted to try that modem but i cannot flash using odin right now because of usb issues so i wanted to flash it by CWM
my question is ... if i replace de modem.bin file from a .zip modem i already have ... will it be ok ?
cos i noticed there are some other files in the zip as well , not just the modem.bin.
so is it ok if i replace the modem.bin in a .zip i know it works and then flash it via CWM ?
thanks
anyone ?
someone must know if it's ok to replace the modem.bin file from a cwm flash-able zip
Try it it will work or it will fail .
But make a note of your existing German modem first .
jje
have you tried to flash via ODIN? afaik CWM can only flash .zip files
Man try this link:http://forum.xda-developers.com/showthread.php?t=1277593
Hi, i'm trying to root my galaxy s2 and have downloaded the correct insecure kernal for my phone, but when i go to open it using winrar it comes as just a file called zImage which i cannot use with odin3 pda. how can i change this and make it into a tar. file?? please help
which version do you have installed on your phone
njcarter94 said:
Hi, i'm trying to root my galaxy s2 and have downloaded the correct insecure kernal for my phone, but when i go to open it using winrar it comes as just a file called zImage which i cannot use with odin3 pda. how can i change this and make it into a tar. file?? please help
Click to expand...
Click to collapse
you unzipped/uncompressed one too many times. Before you get to zImage, this is the file you need to put into odin as PDA.
So I'm clear; the archive/zip file that CONTAINS zImage is the file you need to put into the PDA field of Odin.
Savvy?
I flashed my galaxy s ii GT I9100 with 4 files PDA, PHONE, CSC and PIT files. My phone flashed perfectly without any errors, but when I tried to flash it again with a single PDA file I cannot flash it popping up an error. Is that any one know how to fix this problem
Thank You..
Hi,
what error?
never had any error with single file flashing
greetz
Did you forget maybe to un-pack it?! couse when you download it, it is into a .RAR file....however: What's the error?
[email protected] said:
I flashed my galaxy s ii GT I9100 with 4 files PDA, PHONE, CSC and PIT files...
Click to expand...
Click to collapse
I think he unpack it, but i can't help you, because i flash only through CWM or Mobile Odin Pro.
MFG Chabstyle
flash problem
I unpacked the file and i put it in to PDA field and flashed it, but it gives me an error "fails" . Previously i flashed it with 4 files including pit file it flashed sucessfully "pass". But this time i don't have an pit file. Is it causing this matter I means the pit file?
What should i do to re flash my phone through odin?
Thank you friends
.pit file is ONLY for repartition, NOT for normal flashing!
[email protected] said:
I unpacked the file and i put it in to PDA field and flashed it, but it gives me an error "fails" .
Click to expand...
Click to collapse
What is the extension of the packed and upacked files?
Packed - zip, rar; unpacked - tar, md5; unpacked firmware file - img, no extension.
It's happened to me before and it's been a dodgy download try downloading it again might help
Sent from my resurrection remixed galaxy s2