Hello. adb can't find my device. USB Debugging is enabled and the icon is showing in phone's notification bar.
USB Storage is working well. I tried to reinstall drivers, but it didn't help.
When I enable USB debugging in my phone, in my PC's desktop there pops up a balloon with text:
----
Found New Hardware
A problem occured during hardware installation. Your new hardware might not work properly.
----
Before this, there are many other pop-ups, but they show that everything is loading properly.
Help?
droidaem said:
Hello. adb can't find my device. USB Debugging is enabled and the icon is showing in phone's notification bar.
USB Storage is working well. I tried to reinstall drivers, but it didn't help.
When I enable USB debugging in my phone, in my PC's desktop there pops up a balloon with text:
----
Found New Hardware
A problem occured during hardware installation. Your new hardware might not work properly.
----
Before this, there are many other pop-ups, but they show that everything is loading properly.
Help?
Click to expand...
Click to collapse
thats related to driver issue, you should reinstall the drivers and reboot after installation. Else, try installing adb again.
droidaem said:
Hello. adb can't find my device. USB Debugging is enabled and the icon is showing in phone's notification bar.
USB Storage is working well. I tried to reinstall drivers, but it didn't help.
When I enable USB debugging in my phone, in my PC's desktop there pops up a balloon with text:
----
Found New Hardware
A problem occured during hardware installation. Your new hardware might not work properly.
----
Before this, there are many other pop-ups, but they show that everything is loading properly.
Help?
Click to expand...
Click to collapse
uncheck usb debugging and resatrt ur phn . check usb debugging again and connect it to pc via cable it will install if not just uncheck usb debugging and check try fr sometimes it works.
but the first suggestion works like a charm as it will install drivers sucessfully if done in that order
It can't find my device anyway.
And there still pops-up that balloon with text, in the corner of desktop.
Can't it be a problem with usb cable?
droidaem said:
It can't find my device anyway.
And there still pops-up that balloon with text, in the corner of desktop.
Can't it be a problem with usb cable?
Click to expand...
Click to collapse
Change the usb cable ,but i think is a driver issue!http://www.filestube.com/cn59lHssznIVvTuaArdOfh/LGUnitedMobileDriver-S497MA20-WHQL-ML-Ver-1-0.html try this driver
gabitu73 said:
Change the usb cable ,but i think is a driver issue!http://www.filestube.com/cn59lHssznIVvTuaArdOfh/LGUnitedMobileDriver-S497MA20-WHQL-ML-Ver-1-0.html try this driver
Click to expand...
Click to collapse
I downloaded this, but it only shows "preparing to install" for a moment, when I double click it, and that's all...
EDIT: Now after many driver's reinstalling attempts, also USB Mass Storage isn't working anymore.
... but LGMobile Support Tool recognizes my device.
EDIT2: Here's a screenshot from Device Manager
http://www.bildites.lv/images/m99dribyo454r03mdz6.png
And when I connect my device to PC via USB, in phone's notification bar isn't showing "USB connected" anymore.
EDIT3 : Rebooted the phone and USB Storage works, adb - still doesn't.
UP!
So, does anyone know, what can be the problem? Is there somebody who had the same issue?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(USB Storage works, in phone's notification bar there is adb icon).
Already tried other phone, other USB cable and other USB slot.
Edit: Really nobody can't help?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I get that when I plug my phone into my computer. Any USB (I've tried all). I've uninstalled and reinstalled the driver from here:
http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
I've tried all four types of USB connection. I have used the Motorola Driver Installer and it does not help. I've restarted the PC and phone several times, CCleaned it, no dice.
My phone used to bring up the Motorola Phone Portal in my browser, now it doesn't. It also doesn't show as a device in 'Computer' where it would normally be.
This is happening on my home PC (win7 pro x64) and my work PC (win7 ent x64)
Whaddafack?
Someone over in the Motorola Forums had this issue as well so I gave them this response and it seemed to work.
**"Do you have "Motorola Media Link" installed on your computer? Connect your phone, set the usb mode to "Media Sync" and see if Media Link is installed. If not, you can install here:
http://www.motorola.com/Consumers/U...are/Motorola-Media-Link-Windows-Version-US-EN
After it connects to Media Link, switch the usb mode to "Motorola Phone Portal" and see if it will install the drivers at that point."**
k4zyn said:
I get that when I plug my phone into my computer. Any USB (I've tried all). I've uninstalled and reinstalled the driver from here:
http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
I've tried all four types of USB connection. I have used the Motorola Driver Installer and it does not help. I've restarted the PC and phone several times, CCleaned it, no dice.
My phone used to bring up the Motorola Phone Portal in my browser, now it doesn't. It also doesn't show as a device in 'Computer' where it would normally be.
This is happening on my home PC (win7 pro x64) and my work PC (win7 ent x64)
Whaddafack?
Click to expand...
Click to collapse
live4nyy said:
Someone over in the Motorola Forums had this issue as well so I gave them this response and it seemed to work.
**"Do you have "Motorola Media Link" installed on your computer? Connect your phone, set the usb mode to "Media Sync" and see if Media Link is installed. If not, you can install here:
http://www.motorola.com/Consumers/U...are/Motorola-Media-Link-Windows-Version-US-EN
After it connects to Media Link, switch the usb mode to "Motorola Phone Portal" and see if it will install the drivers at that point."**
Click to expand...
Click to collapse
I'll try it and post here if it worked.
This is all I get:
Are you sure you had the usb mode set to "Media Sync"? And have you tried it in that sequence? [Set to Media Sync then switch to Motorola Phone Portal]
live4nyy said:
Are you sure you had the usb mode set to "Media Sync"? And have you tried it in that sequence? [Set to Media Sync then switch to Motorola Phone Portal]
Click to expand...
Click to collapse
Yes, I've tried it in all modes, still gives me the little popup I've screenshotted above Also the "usb device not recognized" bubble comes up instantly when the phone is plugged in or is switching modes.
I've got 3 sets of cables here and none are working, all the same issue.
Is there something on the phone that I can reset or something?
Are any of those three cords the one that came with the phone?
Have you tried plugging into one of the rear ports of the computer?
Do you have a task killer that is "auto-ending" any apps?
Have you tried toggling between USB Debugging on/off?
When using MotoHelper, did you try the "Clean" option?
I'm really out of suggestions. Hopefully someone else can jump in.
k4zyn said:
I've got 3 sets of cables here and none are working, all the same issue.
Click to expand...
Click to collapse
live4nyy said:
Are any of those three cords the one that came with the phone?
Have you tried plugging into one of the rear ports of the computer?
Do you have a task killer that is "auto-ending" any apps?
Have you tried toggling between USB Debugging on/off?
When using MotoHelper, did you try the "Clean" option?
I'm really out of suggestions. Hopefully someone else can jump in.
Click to expand...
Click to collapse
Yes, one is an original Motorola cable from my phone, I also have one other motorola one and one blackberry one.
I've tried every port on the whole PC (2 in front, 4 in back). I do have ATK running....I'll try it with that off.
Where is this debugging option?
I have used all options in MotoHelper.
Edit: I found debugging, it still says the same thing but I'm going to try cleaning/uninstalling/etc. with debugging on/off in the mix
[Settings > Applications > Development]
k4zyn said:
Where is this debugging option?
Click to expand...
Click to collapse
No, still same ol' same ol'.........
Windows is giving me this error:
"Windows has stopped this device because it has reported problems. (Code 43)"
Ran this:
http://support.microsoft.com/mats/hardware_device_problems/
Didn't find a fix, still sees it as unknown device
http://www.screenr.com/H3xs
I've done this and restarted 11 billion times uninstalled it, went through motohelper to clean/reinstall, nothing happens, etc.......ugh
The last thing I can suggest would be to try another Motorola cable. If that doesn't work then it could be a faulty connector on the phone itself.
EDIT: Nevermind, I just went back and saw you already have another Moto cable.
k4zyn said:
No, still same ol' same ol'.........
Windows is giving me this error:
"Windows has stopped this device because it has reported problems. (Code 43)"
Ran this:
http://support.microsoft.com/mats/hardware_device_problems/
Didn't find a fix, still sees it as unknown device
http://www.screenr.com/H3xs
I've done this and restarted 11 billion times uninstalled it, went through motohelper to clean/reinstall, nothing happens, etc.......ugh
Click to expand...
Click to collapse
It could actually be you're phone's side. Just try it on another computer and see if you get the same message. If you do it might be the USB port on the phone is faulty...
Hey,
too many users are still asking about theirs problems with 'Mass storage' so there is a small guide:
1. Download latest drivers 3.7.2. Someone can't find so there is a link
- LGUnitedMobileDriver_S4981MAN37AP22_ML_WHQL_Ver_3.7.2
2. You have to enable USB Mass Storage so where can I find this option:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. After that windows trying to install MTP drivers what is not working too much on WIN and therefore prevents installation of the USB MS driver so you have to delete some configuration file in:
C:/Windows/INF/
- wpdmtp.inf
- wpdmtp.inf
!BUT MAKE BACKUP FIRST!
After deleting those files windows automatically installs right drivers and you can use Mass Storage.
I did this a few times and when I reinstalled the drivers again, it worked!
Remember to turn on usb mass storage from your drop down screen after the usb cable is connected.
thanks mastershefis.
you mention some files but only list wpdmtp.inf, twice. typo? what is the other file?
gugler said:
thanks mastershefis.
you mention some files but only list wpdmtp.inf, twice. typo? what is the other file?
Click to expand...
Click to collapse
The second file is wpdmtp.PNF. It is in the original post by mastershefis linked below.
Source
..
Nevermind
isnt working for me, pc detects it but when i click computer> to find it no new "drive" is detected to brows the sd cards files.
Doesn't work for me.
The box for USB mass storage is greyed and I can't select it. I have a p5110.
Thanks
Thanks for posting your success story. It does help others, who are looking for confirmation. Thanks again. I am also facing the same problem and going to try this solution.
Thanks,
Joe
brownsmell said:
I did this a few times and when I reinstalled the drivers again, it worked!
Remember to turn on usb mass storage from your drop down screen after the usb cable is connected.
Click to expand...
Click to collapse
---------- Post added at 03:17 PM ---------- Previous post was at 02:30 PM ----------
Success !!!!!!!!!!!!!!
Thankssssssss a lot ... struggling to find a solution for this issue for such a long time ... Tried different things (different computers, different ports, PC Suite, Mounting USB Storage in Recovery, and Formatting SD Card). Nothing worked ...
Finally your solution worked. Reinstalled the latest drivers from the link you provided and restarted my PC ... USB connection prompt promptly appeared on the notification area ... gr8 help. Thanks for the link too.
But this works only when I connect my phone before starting the PC. If I restart the PC it works. If I unplug USB cable of the phone from PC and connect it back, it does not automatically recognizes. I have to restart the PC to get the USB related popup on my phone. Am I doing anything wrong ??? Your help would be appreciated.
Few Questions:
1. After trying all these; if I put the 2 files back on "C:\Windows\inf\wpdmtp.inf", will it cause a problem???
2. Will my USB connection work normally if I do so???
3. Without these 2 files, my Windows in my PC won't misbehave right ???
Please do reply. If I find the solution myself ... will try to post.
Thanks again.
Joe
mastershefis said:
Hey,
too many users are still asking about theirs problems with 'Mass storage' so there is a small guide:
1. Download latest drivers 3.7.2. Someone can't find so there is a link
- LGUnitedMobileDriver_S4981MAN37AP22_ML_WHQL_Ver_3.7.2
2. You have to enable USB Mass Storage so where can I find this option:
3. After that windows trying to install MTP drivers what is not working too much on WIN and therefore prevents installation of the USB MS driver so you have to delete some configuration file in:
C:/Windows/INF/
- wpdmtp.inf
- wpdmtp.inf
!BUT MAKE BACKUP FIRST!
After deleting those files windows automatically installs right drivers and you can use Mass Storage.
Click to expand...
Click to collapse
spljoe said:
Few Questions:
1. After trying all these; if I put the 2 files back on "C:\Windows\inf\wpdmtp.inf", will it cause a problem???
2. Will my USB connection work normally if I do so???
3. Without these 2 files, my Windows in my PC won't misbehave right ???
Click to expand...
Click to collapse
Your PC will works normally without these files. but maybe I have solutions for you. Try to find in windows folder wpdmtp.inf and wpdmtphw.inf if you find it in other folder put them to the C:\Windows\inf and replace older ones.
I have Optimus 4X HD right now and I found in C:\Windows\inf inf file from LG which didn't worked so I replaced it those files what I found in other folder and it worked
Hey everyone,
Ever since updating to "14.1.B.2.257" i can't connect my Xperia Z Ultra (C6802) to my PC. i've tried a lot of things such as reinstalling the drivers, installing and activating ADB etc. But everywhere i look, it's been mentioned that a msg should prompt on my device (the RSA Authentication):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the problem is that i've installed functioning drivers AND the PC recognizes my internal storage and SD card; the only problem is that i can't connect to third party softwares in order to backup or manage my phone via them BECAUSE there is no pop-up msg asking me to authorize the "fingerprint" of my pc :|
i'm very well frustrated having worked on this matter for about 10-12 hours :laugh: so any help would be immensely appreciated!
That is odd. Since you didn't specifically mention it, i couldn't resist confirming: you did enable usb debugging in the developer settings?
So this did work before? How did you update to .257? I hope you get it working, i know how annoying this can be!
Hmm, mine usually connects the second i enable USB debugging. If you're sick and tired of it and don't want to fiddle with it right now but you want to move/remove files and stuff to/from your device, i recommend AirDroid. Just open the app and your browser on you computer and you're ready to go (you have to be connected to the same WiFi as your computer).
Change your usb connection mode to MSC Mass storage mode instead of MTP Media transfer mode. That should do it.
lmemma16 said:
That is odd. Since you didn't specifically mention it, i couldn't resist confirming: you did enable usb debugging in the developer settings?
So this did work before? How did you update to .257? I hope you get it working, i know how annoying this can be!
Click to expand...
Click to collapse
thanks, rest assured that i'm well aware that "usb debugging" is enabled i even tried GIVING UP developer rights and then again recaliming it just as a possible solution (but nope, undoable without serious phone-hauling)
i up'ed it to .2.257 using the OTA method, i think the whole thing might be due to the fact that my device isn't rooted :/ don't ask me why cuz i'm very pissed at Sony for its lacking of such things. (.2.257 can't be rooted yet, not even with vRoot)
LordManhattan said:
Hmm, mine usually connects the second i enable USB debugging. If you're sick and tired of it and don't want to fiddle with it right now but you want to move/remove files and stuff to/from your device, i recommend AirDroid. Just open the app and your browser on you computer and you're ready to go (you have to be connected to the same WiFi as your computer).
Click to expand...
Click to collapse
Thanks Lord, as i stated i only have trouble connecting to third-party softwares such as Mobango and Moborobo (do u know if there are any such softwares better?) the rest is kinda okay, i can see my device as a connected device in My Computer etc.
SundayDuffer said:
Change your usb connection mode to MSC Mass storage mode instead of MTP Media transfer mode. That should do it.
Click to expand...
Click to collapse
Thanks for replying Sunday, but that's another odd thing: i can't seem to change the connection mode from "Internal & SD Card Connected" to anything else, cuz i did hypothesize that changing it to any other form of connection might have a chance at prompting the "RSA Fingerprint" msg :laugh: but i simply can't change it to anything else, again, might be due to the fact that my device isn't rooted
Did you go here?
Settings/xperia Connectivity/usb connectivity/usb connection mode
---------- Post added at 06:49 AM ---------- Previous post was at 06:48 AM ----------
Did you go here?
Settings/xperia Connectivity/usb connectivity/usb connection mode
Hello guys,
This is my first "problem" post on XDA, and it's really nice to hang out here reading the knowledge of lots of professionals. However i have a problem with my Galaxy S4 (GT-I9500)'s USB dial-up modem functionality which is not working on Android version is 5.0.1 Lollipop, using Stock Samsung ROM + TWRP Recovery, rooted device.
The problem, as i'm running on Windows 7 x64 SP1, and i first installed official Samsung USB Drivers For Mobile Phones installer (1.5.51.0 - not Kies) just fine and connected by S4 using an OEM USB cable, the device was recognized just fine including the following entries:
- Samsung Mobile USB Composite Device
- My Device Name (as MTP Device)
- Samsung Mobile USB Modem
- Samsung Android ADB Interface
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But, i see NO "Ports" category and any entry like "Samsung Mobile USB Serial Port" in device manager, hence the problem is, although the device is recognized as Samsung Mobile USB Modem fine in device manager with no exclamation warning, and it seems that the modem is attachted to COM4 virtually, but i CAN'T get any response from modem when i click "properties" > "diagnostics" > "Query Modem" --- "the modem failed to respond" error, can't open COM4 port.
Note that this is my first Android device, i figured out that it's connected at "MTP+ADB" mode which is default as can be seen from *#0808# dial menu. And since using TWRP, there is no "Enable CP Logging" option if switching to DM+MODEM+ADB mode is required to get response from COM port. True?
What am i missing here? The dial-up funcionality was fine on my ancient Nokia S60 Symbian phone with no hassle and it was automatically detected by Windows. Now with Android, it's a bit confusing for me.
What i'm trying to achieve is that i should be able to query modem and get/execute AT commands from serial port terminal (eg: puTTY) just like on old days, and want to use it as dial-up USB Modem on my old desktop PC which does not have a built-in WLAN adapter to reach the internet.
Any help is greatly appreciated.
Screenshots here:
http://imgur.com/a/IOXNU
Any help is appreciated.
Maybe I'm missing something, but I am confused on trying to connect as a dial up modem? Why not just use USB tethering?
es0tericcha0s said:
Maybe I'm missing something, but I am confused on trying to connect as a dial up modem? Why not just use USB tethering?
Click to expand...
Click to collapse
Thanks for your reply. It's just my curiousity. When i first connected the phone (Stock Lollipop 5.0.1), Samsung USB Mobile Modem device is recognized and installed just fine, that means i should be able to communicate using COM port and establish a fresh-new dial-up connection with no hassle, instead of switching to USB Tethering mode which installs RNDIS network adapter device.
I noticed that corresponding COM port was not installed by default (clever Samsung!) although the "modem" is recognized on USB connection. I'm missing this (example picture) port which is diagnostic port, right?
I have no Samsung Mobile Usb Serial Port driver in Device Manager, and wonder how i can get this working, it really frustrated me.
Do i have to enable diagnostic port to let this "port" appear on Device Manager so i can communicate with my phone as dial-up modem?
(I read enabling diagnostic port is impossible with custom recoveries like TWRP / CWM). So i'm a bit lost, too.
Any enlightening information is greatly appreciated.
You might be able to play around with those settings from "dialing" *#0808#.
Since Samsung Mobile USB MODEM is recognized and NOT WITH the SAMSUNG MOBILE USB SERIAL PORT, i still cannot understand why modem part is exposed by stock firmware in MTP+ADB mode. It's ridicilious and makes completely no sense.
I'm still curious about the explanation of the issue.
For anyone else with this issue, I solved it by on my S7 (G930F) as follows:
Dial *#9090#, servicemode screen appears
Select [4] AP,CP Interface
Select [1] Path
Select the [1] USB option
Click menu button (vertical dots) and select END
Restart phone
Also, use this driver: SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe and make sure the modem is installed with it.
I have a problem with S9 + (org ROM).
The phone normally charges via a USB cable, while connecting to a computer does not recognize it.
After connecting the USB, the phone only charges and does not send data ....
I tried on 4 cables and 2 different computers .. just the same ... I wonder if any program does not bother USB or maybe something in the options I changed
I checked USB debugging, USB mode (MTM data transfer mode). ... and in spite of everything the problem occurs
Is a damaged USB port? ?
The beam only appears "landing using a cable" << it is not possible to expand the USB connection option
I have uninstalled drivers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I installed Kiess and nothing .. I still do not recognize the device
The problem does not seem to be a cable or a connector (it would not charge if USB was released
gamblerpl said:
I have a problem with S9 + (org ROM).
The phone normally charges via a USB cable, while connecting to a computer does not recognize it.
After connecting the USB, the phone only charges and does not send data ....
I tried on 4 cables and 2 different computers .. just the same ... I wonder if any program does not bother USB or maybe something in the options I changed
I checked USB debugging, USB mode (MTM data transfer mode). ... and in spite of everything the problem occurs
Is a damaged USB port? ?
The beam only appears "landing using a cable" << it is not possible to expand the USB connection option
I have uninstalled drivers
I installed Kiess and nothing .. I still do not recognize the device
The problem does not seem to be a cable or a connector (it would not charge if USB was released
Click to expand...
Click to collapse
Have you updated and configured Bixby? That seems to be needed to connect to the PC. See my reply to the later thread about being unable to connect to PC by USB.
Hope this helps.
how can I config Bixby ? -I can't find your thread
Bixby is the first home screen, it'll ask a bunch of questions to get started.
The thread is USB Device not recognized by Labeled.
My usb port got real flakey. Would not fast charge on cable but would wirelessly. When cable connected to Android Auto was always getting device not recognized error. I took it back to tmobile and warranty exchanged it for another. The new one works great.
gamblerpl said:
I have a problem with S9 + (org ROM).
The phone normally charges via a USB cable, while connecting to a computer does not recognize it.
After connecting the USB, the phone only charges and does not send data ....
I tried on 4 cables and 2 different computers .. just the same ... I wonder if any program does not bother USB or maybe something in the options I changed
I checked USB debugging, USB mode (MTM data transfer mode). ... and in spite of everything the problem occurs
Is a damaged USB port? ?
The beam only appears "landing using a cable" << it is not possible to expand the USB connection option
I have uninstalled drivers
I installed Kiess and nothing .. I still do not recognize the device
The problem does not seem to be a cable or a connector (it would not charge if USB was released
Click to expand...
Click to collapse
I have this problem too, but after a while I realised that if I connect to a computer with a USB-C to USB-C cable, the computer would recognise my phone and vice versa. Android auto would work with some cars, the one tested being an 2017 Hyundai Elantra. I'm not sure why this problem occurs though.