I am pretty sure the answer is send it back and get a new phone, but I thought I'd ask here first.
I tried an Odin flash of my own ROM pulled from my phone via using dd on the different partitions. I had a SUCCESSFUL Odin flash, and the phone turned off to reboot after the flash, as it always does for me.
Instead of turning on, however, the phone is completely dead. No power, nothing on the screen, the power button does nothing. I have tried pulling the battery, plugging it in, and all sort of combinations of power and volume keys. Nothing.
Bricked, or does anyone have any suggestions?
An actual true brick? I'm both amazed and saddened at the same time.
My condolences in your time of loss
Sent from my Vibrant running Bionix Final w/Jacs and Voodoo using XDA App
I am assuming it is a true brick, but the other 25 times I've assumed it was bricked, it turned out that I could recover with a little more effort. So far, thought, no luck on this one.
I would think if the power button is unresponsive like it is, you stated you also tried after battery pull, with battery, with just power cable, with both, tried the volume buttons incase something got remapped, that she's a goner. Did you try usb to the computer instead of power? Or touching the home or menu button portions of the screen? That last one is a shot in the dark but cant hurt. Beyond that and every other button combo you've tried, I'm out of ideas.
Sent from my Vibrant running Bionix Final w/Jacs and Voodoo using XDA App
Try this, get it into DOWNLOAD MODE AND ODIN FLASH IT.
here you go.... If you feel like you semi-bricked your phone and cannot boot into download mode.. there is a trick that might work for some or it might not doesn't hurt to try, but damn sure worked for me... Make sure phone is connected to computer with ODIN Opened,..
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone. IT SHOULD BOOT INTO DOWNLOAD MODE. if not sorry. Sometimes when people flash back and forth the up and down volume keys get reversed... so try volume down and power.. or volume up and power. GOOD LUCK!!!
cparekh said:
I am pretty sure the answer is send it back and get a new phone, but I thought I'd ask here first.
I tried an Odin flash of my own ROM pulled from my phone via using dd on the different partitions. I had a SUCCESSFUL Odin flash, and the phone turned off to reboot after the flash, as it always does for me.
Instead of turning on, however, the phone is completely dead. No power, nothing on the screen, the power button does nothing. I have tried pulling the battery, plugging it in, and all sort of combinations of power and volume keys. Nothing.
Bricked, or does anyone have any suggestions?
Click to expand...
Click to collapse
If you can't fix it then the answer is buy a new phone.
someone posted this in another thread
http://forum.xda-developers.com/showthread.php?p=8822843
tee34life said:
here you go.... If you feel like you semi-bricked your phone and cannot boot into download mode.. there is a trick that might work for some or it might not doesn't hurt to try, but damn sure worked for me... Make sure phone is connected to computer with ODIN Opened,..
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone. IT SHOULD BOOT INTO DOWNLOAD MODE. if not sorry. Sometimes when people flash back and forth the up and down volume keys get reversed... so try volume down and power.. or volume up and power. GOOD LUCK!!!
Click to expand...
Click to collapse
I had the same problem today and I tried this method and it worked
just FYI
Hello, I was trying to flash my phone using ODIN and Eugene's 2.2 ROM. Things were going well, until I accidentally nudged my computer, which apparently has a very loose USB port. ODIN tells me that the phone disconnected. Plugging and unplugging the phone again would not work, so I was forced to do a battery pull. I am now stuck at the Phone /!\ PC screen, and the Volume Up, Down, Power button sequences do not work. Am I totally screwed?
Thanks.
ionstream said:
Hello, I was trying to flash my phone using ODIN and Eugene's 2.2 ROM. Things were going well, until I accidentally nudged my computer, which apparently has a very loose USB port. ODIN tells me that the phone disconnected. Plugging and unplugging the phone again would not work, so I was forced to do a battery pull. I am now stuck at the Phone /!\ PC screen, and the Volume Up, Down, Power button sequences do not work. Am I totally screwed?
Thanks.
Click to expand...
Click to collapse
No, youre not screwed. Remember that the Vibrant is nearly impossible to kill. Reboot and hold both volume buttons + power at the same time and when you see "Vibrant" on your screen turn to black then let go of power and Download mode will pop up. Then do Odin.
My phone went to that screen as well. Didn't get there the same way but here's what got me to download mode...
Pull battery, sim card, and sd card. Put battery back in but do not turn on. Plug usb cable into computer and phone. Start Odin. Hopefully your phone shows the charging image, now hold both volume buttons and power button until the vibrant screen comes up. Immediately release the power button, keep holding other two buttons. It should boot into download mode.
Flash with Odin like normal and then replace sim card and sd card. I had to do this twice yesterday.
Typos and other gibberish courtesy of Swype
Unfortunately when I plug in the USB cable after putting the battery in, it does not show the charging screen, but the Phone /!\ PC screen. Additionally, starting up the phone while holding the Volume Up, Down and Power buttons also brings me to the same screen. It seems like my phone is the kind that does not have the 3 button download mode option. Is there any other way to get out of this screen?
Well, I've never had that situation but I'm pretty sure it's fixable. The Vibrant is almost impossible to brick.
You'll gave to keep searching and wait for someone more knowledgeable than me...
Typos and other gibberish courtesy of Swype
Well the help is much appreciated anyways! I hope I don't have to hack a microUSB cable with soldered resistors and such. Does anyone have any ideas?
ionstream said:
Well the help is much appreciated anyways! I hope I don't have to hack a microUSB cable with soldered resistors and such. Does anyone have any ideas?
Click to expand...
Click to collapse
i just fixed my phone when it was like that, just plug the usb cable in, hold both vol buttons and the power button, it may take a minute or so, but you will see your screen go completely black, let go of the power button and keep holding the vol buttons, and you will get in download mode, trust me, i panicked just like you, just keep trying it, it took me about 30 minutes to get in download mode
Thanks for the advice! Should the battery be in while I'm doing this? If so, should I put the battery in before the usb cable?
ionstream said:
Thanks for the advice! Should the battery be in while I'm doing this? If so, should I put the battery in before the usb cable?
Click to expand...
Click to collapse
yes put the battery in, and then plug in the usb cable
Heres whats happening right now: when I plug in the USB cable, hold down the Volume Up, Down, and Power buttons, a few seconds later the screen will go black, at which point I unpress the power button. But this does not bring me to the download mode, it just brings me back to the error screen. If I press all 3 buttons again, as before eventually the screen will turn to black, but it will always bring back the error screen. It also behaves the same whether the USB cable is plugged in or not. I suppose this is progress, but am I doing something wrong? Arent I just supposed to let go of the power button when its black?
I am having the same problem except I am only getting the Vibrant screen. I have been trying to fix this for hours, and am about ready to go swap the damn phone out. It is literally driving me crazy. NONE of the methods to get to download mode are working.
[A] I'm screwed, arent I. (Brick, Phone ! PC, no download mode)
From what I hear, 1 in 3 Vibrants won't go into download mode in this situation. Mine does it just fine, my buddy's phone - no dice. I bricked it, so I fixed it. The solution was the spare micro usb + solder + 301k resistor(s). It worked perfectly, the 1st time. I'm a skeptic turned believer! It cost about $8.00 for the cable & resistors at Fry's Electronics.
Sigh, I guess I'm going to have to build this thing then, which is great because the nearest radio shack is 5 miles from my place. Ah well, better than having no phone.
I commend you in your efforts! Once you get out of this you'll be truly unbrickable. GL!
I was discouraged by the fact that I was far from a Radio Shack, but I looked online and it turns out you can actually create a resistor by drawing a line in pencil on a piece of paper. I have a multitester and stripped phone wire, and was able to duct tape the wire on specific points to get 302Kohms! Unfortunately thats where the project stopped, because I don't have a spare microUSB cable to butcher haha. And a friend offered to drive me to radio shack so I don't have to be the poorest electrician ever.
I might still try that method though! Just for kicks.
Try this
Ok, so I see some ppl offered advice on how to get into download mode. That is great, but I found their methods to be very different from mine. So give this a go and see if it works before you go into MacGyver mode.
Please note: DO NOT PRESS THE POWER BUTTON EVER DURING THESE INSTRUCTIONS.
1. Take back cover off phone
2. Remove the battery
3. Plug the USB into your computer, and then the other end into your phone.
4. Hold down both volume buttons (do not press the power button!) and while holding them both down put your battery back in.
5. Hold in place for approximately 2 seconds.
You should now be in download mode. Keep in mind, you said that your usb on your computer is "loose." Be extra careful not to bump it or anything b/c if the phone isn't being recognized as plugged into a computer download mode will not work. Hope this helps!
I got back to stock via odin. I tried to re root and it will not let me. When I do adb reboot recovery I click on reinstall packages and it takes me to cwm recovery. I then click instal from sd card and click on update.zip says it installed but didn't after reboot.
Sent from my SGH-T959 using XDA App
Hi, I had that problem before, here is what I did to fix my vibrant. take sim, microSD, and battery out of the phone. Connect the microusb and turn on odin. hold down volume+, volume-, and power down. while holding them down put in the battery and it should get to download mode once boot. also odin should detect it.
Hope that work.
I have returned! Unfortunately none of the many volume up/down button techniques were able to get me into download mode, as I must have a hardware locked phone. Fortunately though, I was able to get a ride to Radio Shack, where I spent 27 dollars on a microUSB adapter, a pack of resistors and solder. The adapter and solder I didnt even use. I twisted together 3 100kohm resistors and 1 10kohm resistor (my multitester read 305kohm total, I guess thats the 5% tolerance). I never ended up using the microUSB adapter because when I cracked it open, I couldnt find pins 4 and 5, so I cracked open the samsung USB cable that came with the phone. Plugged it in, tapped the two ends of the resistors awkwardly to what I beleived to be 4 and 5, and it worked! First thing I did was get Eugene on there, put the casing back on the USB cable (which still works!) and then marked that USB port to never be used again. The phone works great now! Thanks to however discovered that 301Kohm trick, you are a life saver.
Thanks all!
Volume Down + Home + Power.
Works for me everytime Best of luck man
My phone is a Telus t959D
I am stuck at the phone--!--PC screen. 3 button combo does not work, please do not give me other 3 button combos because it will not work. I think i need to fix this battery problem first and the download mode will come itself.
Plugging it in to the usb gives me a screen with an empty grey battery, with the progress circle in the middle frozen.
I cannot go into download mode because when i connect the usb, the grey battery pops up.
If i turn the phone on with no usb, i get the phone--!--pc screen.
Making another thread on the wrong section with the same question should discourage people to help you.
Furthermore, people already gave you answers in the previous thread
sendan said:
So to clarify, you pulled the battery, then with one end of your USB cable plugged into the computer, held down your volume down button, then plugged in the other end of your USB cable to your phone (you should still be holding the volume down button) and after a few seconds you're still not getting into download mode?
Click to expand...
Click to collapse
Have you tried the above? Odin messed up a flash for me once and got soft bricked like yours, but I was able to get back to Odin via the above method. If volume down doesn't work, try volume up.
Otherwise, if neither works, just accept your phones fate and either get a USB jig off ebay or send your phone back in. Next time, stick to stock
I was on the latest MIUI (9.something), boot-loader unlocked, redwolf recovery (v27), last seen battery was ~50% charged (before going off).
And, I was using my phone. Suddenly screen goes off and nothing comes up. I tried to restart, it doesn't work.
Finally I googled the problem and tried these things:
1) Press power button 5 times, then try to start the phone by long pressing power button.
Result: Screen open up, that initial screen with MIUI logo, I keep the button pressed, screen goes off and instantly starts again with booting started. Now, as soon as boot finishes, that *low-power* sound comes and it switches off.
2) Press power button 5 times, then try to start the phone by long pressing power button. This time when the screen comes up first time, I press (vol-up + power) to boot to recovery.
Result: As expected. That screen goes off and instantly another screen comes up with the recovery splash screen. Recovery comes up. There on the top, it shows two weird stats: (CPU temp 105 deg C, battery 0%).
3) Press power button 5 times, then try to start the phone by long pressing power button. This time don't press anything on the first screen.
Result: The screen goes off and that's it.
Some weird symptoms worth knowing:
1) Whenever I plug the charging cable (either with charger or, laptop) it just do not boot, neither to system nor to recovery.
2) The micro-USB port is damaged I guess. Last time (a day before all this), I tried to connect phone to my laptop but the socked seemed lose. It was just not connecting, rather fluctuating a bit.
3) Whenever I plug the charging/data cable (either with charger or, laptop) while booting or, while in recovery it suddenly switches off.
either your battery got badly damaged, or your device got fried.
First, I'd agree on the first commenter and support you taking the device to any android service center to check whether your battery or phone got fried. If it's done and proved nothing is wrong with my battery/phone I'd buy an EDL deep flash cable (I bought one for dirt cheap, 5 dollars) and try to solve my problem via deep flash, edl emergency download mode. There are tons of how to do tutorials on the official Xiaomi forums. Good luck with that, my friend!
I've updated something. Please see it.
How would I use edl if port is not working properly? See the original ques. again. I've updated it.