Related
Alright guys... This is my situation. I'm running the old Axura 2.2 edition. I saw some screenshots of nero v3 and and read that flashing different roms isn't that hard. The last thing I need is to brick my phone. Therefore I have some questions...
1) How do I flash a different rom from my current rom? Do I have to flash back to stock???
2) What is this Voodoo thing about? I see threads about it making your phone fast but then it can also brick while flashing????
Please help!!!!
chuckblock said:
Alright guys... This is my situation. I'm running the old Axura 2.2 edition. I saw some screenshots of nero v3 and and read that flashing different roms isn't that hard. The last thing I need is to brick my phone. Therefore I have some questions...
1) How do I flash a different rom from my current rom? Do I have to flash back to stock???
2) What is this Voodoo thing about? I see threads about it making your phone fast but then it can also brick while flashing?
???
Please help!!!!
Click to expand...
Click to collapse
1) Its prob safest to flash back to stock. It gives you a clean slate to go on,
2) Voodoo is commonly called a lagfix, but its more then that. It converts your file sytem from the facory rfs to an ext 4 format. Check out supercurios thread in the development section for mere info. PLEASE make sure its disabled before flashing another rom.
3) Read thru the nero thread for proper flashing instructions.
GreggoryD502 said:
1) Its prob safest to flash back to stock. It gives you a clean slate to go on,
Click to expand...
Click to collapse
ok so i need to read up on Odin on how to flash back and currently going to supercurious thread... thanks!
Safest to flash back to stock (use odin), But....... you really don't have to. The risk is it might soft brick and then you would have flash back to stock..... So flash away can't hurt. Just remember if you have a lagfix on your phone disable before flashing
I have flashed from Axura 2.2 to Nero3 to heathen, to Ginger Clone and back to Axura I never flashed back to stock....... I have had no problem.......
For the most part they are from the same leak......... so the kernels are not that different.
chuckblock said:
ok so i need to read up on Odin on how to flash back and currently going to supercurious thread... thanks!
Click to expand...
Click to collapse
ODIN tutorial for you...http://forum.xda-developers.com/showthread.php?t=810130
Going back to stock is not a necessity, but advised, since some settings and fragments from a previous ROM can remain and cause issues....not always though. You can always give it a shot, disable voodoo first, then just flash Nero through CWR.
wow thank you guys soo much... you guys cleared up everything... now im comfortable!
Glad to help. Let us know how it works out.
Powered by Axura with a dash of Voodoo
Hello everyone! I recently began contemplating rooting and doing custom installs for my 959, for something fresh and better performing, also seems my music player has been acting up recently and am really interested in something new along with voodoo sound... If necessary anymore ? Thing is, there are so many ways to root, and there are so many custom roms??? I don't know where to start or what to look for? I just want one of the better, stable, new custom roms available as of this date for the t-959. I search but seems there's no definitive answer? Just a lot of roms haha?
Also when downloading a rom, do I have to download like 30-40-50 kernels and add them? I see all these roms, kernels and update??? Is it just download a rom and that's it, am I making more of it than it should be?
I'm just really noob'ish, really confused, and really, really nervous! I can't afford to brick this phone, but I really want something new.
Thanks for reading, and I apologize for some of the silly questions I have asked .
I fell in love with rom flashing as it greatly improves performance and gives phone a new look. Especially since Vibrant isn't supported anymore.. I can't live without voodoo goodies=) Definitely improves sound.
Negative side of custom roms is it takes up some of your time.. Finding a rom you like, tweaking it.. Not too mention you might brick you phone.
If you decide so.. the most important thing is always read OP...
I used superoneclick to root. I recommend Bionix 1.3.1 as a first rom very stable though a bit outdated. After playing around with the rom, you can try different 2.2 kernels and modems. Then go on to gingerbread roms.=)
Extremely easy. I'd suggest reading some of my guides in my signature.
I would Odin
Then download a ROM (nothing else needed)
Download my option b update.zip
Move both to internal sd
Reboot into recovery
Click reinstall packages
Choose to install zip from sd, select ROM, reboot.
Sent using the XDA app.
s15274n said:
Extremely easy. I'd suggest reading some of my guides in my signature.
I would Odin
Then download a ROM (nothing else needed)
Download my option b update.zip
Move both to internal sd
Reboot into recovery
Click reinstall packages
Choose to install zip from sd, select ROM, reboot.
Sent using the XDA app.
Click to expand...
Click to collapse
Thank you trailblazer and thanks s15....
Any roms you would recommend s15? I appreciate the starting rom you gave me Trail, I'm looking for something a little more up to date I suppose? I was looking at cm7 or Simply Honey 5.0 Revolution(JVR GB 2.3.4)? Something with voodoo already in it? Something pretty stable with a bit of features. Maybe a lil less lag than stock 2.2, better performance, audio and battery life as well?
Thanks so much again both!
cm7 in nightlies still, though seem pretty stable, i havent tried for a while. Lots of features though dont think battery too great.
Simply Honey is a good one, stable, lots of features, great developer support.
I'm currently on RevolutionRom 2.3.4, stable and smooth for me, only bad is itfreezes like once or twice a day. More of a sgs2 look which i like. Good battery.
FYI Flashing Gingerbread roms, you will need to flash gingerbread bootloaders to remove rainbows and see recovery ( theres a post on it)
Also GPS isn't stable on gingerbread.
trailblazerz11 said:
cm7 in nightlies still, though seem pretty stable, i havent tried for a while. Lots of features though dont think battery too great.
Simply Honey is a good one, stable, lots of features, great developer support.
I'm currently on RevolutionRom 2.3.4, stable and smooth for me, only bad is itfreezes like once or twice a day. More of a sgs2 look which i like. Good battery.
FYI Flashing Gingerbread roms, you will need to flash gingerbread bootloaders to remove rainbows and see recovery ( theres a post on it)
Also GPS isn't stable on gingerbread.
Click to expand...
Click to collapse
I think I'm gonna try the simply honey one or wait till he does a final release?, as for the bootloaders, what do I do or go to there? Also for the kernels, do I need to download one for simply honey? Should I download one for it?
I seen some roms or kernel can improve wifi and signal? Is that true, if so point me in that direction hahaha...
Thanks so much bro by the way.
search for Vibrant gingerbread bootloader, it's flashable via odin..simply honey roms comes with bullet kernel & there's Simply Honey Talon Kernel build by simone201 =)
Thanks man, do you mind if I ask which one you would recommend (Odin or Clockwork?)... I stumbled upon this youtube how to called "Custom ROM installation tutorial for the T-Mobile Samsung Galaxy S (Vibrant)", and was just wondering if I can apply all his methods to SH 5.0? Sorry tried to link it but cannot due to my post count... Oh and when I'm done, how should I proceed with the new talon kernel?
Also if there's a new release of honey or the final release, say I installed this one... Do I have to do it all over again? Same wit kernels? Finally, do I need to revert my unrooted stock 2.2 froyo back to a previous version before gingerbread or any of this?
Thanks for your reply. I'm actually feeling like it's almost go time with this rom and kernel haha. Really thanks heaps!
D bootloader is only flashable by odin..you can read the OP for simply honey, what you need is all in there in d development area..flash kernel that works 4ur phone u decide on that wether bullet or talon..you can use sgs kernel flasher to switch bet the two..
Sent from my SGH-T959 using XDA Premium App
Djhemz07 said:
D bootloader is only flashable by odin..you can read the OP for simply honey, what you need is all in there in d development area..flash kernel that works 4ur phone u decide on that wether bullet or talon..you can use sgs kernel flasher to switch bet the two..
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
One last question before I do this, I seen SH 5.1, but I seen it was for the i9000? Which one should be used? or the one you may recommend? Im looking for voodoo sound controls.
Thanks
EDIT:
Nevermind I read it will be up tomorrow... gonna do 5.1, this is pretty exciting as long as I don't screw anything up hahaha
i reverted back to stock firmware via odin and one click rooted my phone, factory wiped all data and now I remember after I rooted my phone I had unzipped file in my sd card and it told me that i can just delete it after I was done, well i did and then watched a video on clockwork that said not to delete it?
EDIT: Nevermind I fixed it, I just unrooted and rooted again...
So sorry for being a pain, I know you guys have better things to do.
3 questions and this thread is done... thanks for the help...
1. Does the market work on simply honey? Like can go in and search and download it like usual?
2. should I use odin to install 5.1 or cw?
3. how does the kb5 work? is that like default or do i have to flash it?
Thanks a million in advance!
Hello all, I have some questions hopefully someone can help me with. First of all, I'd like to say I'm not a complete newb, or idiot. I have a inc2 which I have rooted and modified myself to my liking based on the stock ota Rom after trying many custom roms. I have a custom kernel set up, a daemon installed, I'm underclocked and undervolted per my settings and govs. I have read threw this forum a lot, I ordered this phone for my wife, should be here in the next few days, I'm excited as I will take it over for a few days playing with it. I have had a Samsung moment before also that I rooted, though long ago. My questions are, obviously, this bootloader is not locked, correct? On my HTC, I s offer and rooted, if I want to upgrade to the newest ota, I just wait for a dev to deox, zip align, and pre root it, then I flash that Rom in clockwork via zip file. On this phone, I should update first, before I root? If Verizon releases a ota, can I just update my phone as if I weren't rooted an retain root and everything, if not, how do I get it? You guys speak of a modem, is that the same as what HTC guys refer to as the radio, and does it need to be flashed seperately as I have to now, or is it included in Samsung roms? Is there any recovery, even the stock one, that can be used to flash and backup that isn't actually on the SD card and not the phone, in case somethin goes wrong with my card I will still be able to get into recovery? Is the fascinate officially on gingerbread? Can I just flash roms through recovery, or do most of them.require this odin thing? What is voodoo? I gather its something to do with a kernel, can it be used on a stock rooted 2.3 Rom "if there is such a thing"? I'm just a newb to this phone who can't wait to play with a new toy for a while, just unfamiliar with terminology and how things work on Samsung phones now. Should I just use some one click root method to obtain root then use the stock recovery (or custom if anyone knows one that can be installed to phone not SD) to flash files and kernels? If Verizon pushes a new ota after I do this will it try and screw me like on my inc 2? Thanks in advance for any help.
Sent from my ADR6350 using XDA App
jeremytn86 said:
Hello all, I have some questions hopefully someone can help me with. First of all, I'd like to say I'm not a complete newb, or idiot. I have a inc2 which I have rooted and modified myself to my liking based on the stock ota Rom after trying many custom roms. I have a custom kernel set up, a daemon installed, I'm underclocked and undervolted per my settings and govs. I have read threw this forum a lot, I ordered this phone for my wife, should be here in the next few days, I'm excited as I will take it over for a few days playing with it. I have had a Samsung moment before also that I rooted, though long ago. My questions are, obviously, this bootloader is not locked, correct? On my HTC, I s offer and rooted, if I want to upgrade to the newest ota, I just wait for a dev to deox, zip align, and pre root it, then I flash that Rom in clockwork via zip file. On this phone, I should update first, before I root? If Verizon releases a ota, can I just update my phone as if I weren't rooted an retain root and everything, if not, how do I get it? You guys speak of a modem, is that the same as what HTC guys refer to as the radio, and does it need to be flashed seperately as I have to now, or is it included in Samsung roms? Is there any recovery, even the stock one, that can be used to flash and backup that isn't actually on the SD card and not the phone, in case somethin goes wrong with my card I will still be able to get into recovery? Is the fascinate officially on gingerbread? Can I just flash roms through recovery, or do most of them.require this odin thing? What is voodoo? I gather its something to do with a kernel, can it be used on a stock rooted 2.3 Rom "if there is such a thing"? I'm just a newb to this phone who can't wait to play with a new toy for a while, just unfamiliar with terminology and how things work on Samsung phones now. Should I just use some one click root method to obtain root then use the stock recovery (or custom if anyone knows one that can be installed to phone not SD) to flash files and kernels? If Verizon pushes a new ota after I do this will it try and screw me like on my inc 2? Thanks in advance for any help.
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
You don't actually have to root the phone. Just flash the rooted Rom of your choice through odin, and then use odin again to flash cwm (if you're using TW roms).
There's no official Gb for the fascinate as of yet, but there are a couple of Gb roms ported from the Mesmerize. Look them up in the forums. Never use the phone button in odin, always pda
By the time Verizon pushes an update somebody will already have it rooted, Su, deodexed, and ready for use. In any case, you can always go back to a completely stock version in less than 10min
SCH-I500 PWGB 2. 0b3 TKSGB 9-27, shot v9. 5, honeycomb v 2.02
laureanop said:
You don't actually have to root the phone. Just flash the rooted Rom of your choice through odin, and then use odin again to flash cwm (if you're using TW roms).
There's no official Gb for the fascinate as of yet, but there are a couple of Gb roms ported from the Mesmerize. Look them up in the forums. Never use the phone button in odin, always pda
By the time Verizon pushes an update somebody will already have it rooted, Su, deodexed, and ready for use. In any case, you can always go back to a completely stock version in less than 10min
SCH-I500 PWGB 2. 0b3 TKSGB 9-27, shot v9. 5, honeycomb v 2.02
Click to expand...
Click to collapse
I stayed up half the night last night pouring over these and other forums, I have decided I want something like your setup, I know what the PW thing in your signature is, as that's what I want, what are those other things? I guess I'm gonna put the vodoo kernel on there too. And o yeah, I can just take my completely stock phone, odin the PW Rom, and bam, I'm rooted? Do I need to install a gingerbread bootloader first? Thanks for answering these long posts..
Sent from my ADR6350 using XDA App
You can just grab the Odin file for PWGB /w modem and flash that, then flash a CWM file in before starting up the phone so it takes....and you are done. I suggest you start off with a stock kernel(included in the odin file) before you move on to other kernels. It will help you see the differences between the kernels more clearly, which to me are marginal at best...for the time being anyway.
FDro said:
You can just grab the Odin file for PWGB /w modem and flash that, then flash a CWM file in before starting up the phone so it takes....and you are done. I suggest you start off with a stock kernel(included in the odin file) before you move on to other kernels. It will help you see the differences between the kernels more clearly, which to me are marginal at best...for the time being anyway.
Click to expand...
Click to collapse
Thanks so much man, so if I do it that way, cwm will be on my phone memory, not SD card, correct? Also, what about that gingerbread bootloader I read about, do I need that for anything?
Sent from my ADR6350 using XDA App
jeremytn86 said:
Thanks so much man, so if I do it that way, cwm will be on my phone memory, not SD card, correct? Also, what about that gingerbread bootloader I read about, do I need that for anything?
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Don't worry about the boot loader, it'll be in the PWGB odin file.
TKSGB 9-27 is the kernel by comradesven
Adrenalineshot 9. 5 is the speed tweak
Honey comb 2. 02is the theme.
Everything you need is in the development section
I believe cwm is always in phone memory (not 100 per sure though)
SCH-I500 PWGB 2. 0b3 TKSGB 9-27, shot v9. 5, honeycomb v 2.02
Laurenop is spot on in his posts...everything you need is included in the pwgb.tar except cwm. Thats why I always recomend new fascinate users to start with this rom. it's easy to install with no hiccups. Prime example is a couple threads down, a new user is trying to flash miui...instead of being patient, learning, doing lots of reading, he starts getting flash happy. By the time I get back on to help him he has impatiently skipped thru provided directions and soft bricks his phone lol... then wants to be spoon fed everything because he is in panic mode since it's not even his phone. Im glad you have taken the time and read up, I have no doubt you will enjoy the fassy! Welcome aboard!!
Thanks guys, I believe that does it for me, the thing I was talking bout as far as cwm bein on SD card was because I read on this forum somewhere it was on there not the phones memory, that's why Rom manager asks you to verify it or somethin, thanks for bein patient with me, now time to get my feet wet, the more I learn the more I help also, I'm not just a leech, I love helping others so you guys time and efforts were not wasted. Thanks
Sent from my ADR6350 using XDA App
jeremytn86 said:
Thanks guys, I believe that does it for me, the thing I was talking bout as far as cwm bein on SD card was because I read on this forum somewhere it was on there not the phones memory, that's why Rom manager asks you to verify it or somethin, thanks for bein patient with me, now time to get my feet wet, the more I learn the more I help also, I'm not just a leech, I love helping others so you guys time and efforts were not wasted. Thanks
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Don't even attempt using Rom manager. For all intent and purposes is useless on TW roms
SCH-I500 PWGB 2. 0b3 TKSGB 9-27, shot v9. 5, honeycomb v 2.02
laureanop said:
Don't even attempt using Rom manager. For all intent and purposes is useless on TW roms
SCH-I500 PWGB 2. 0b3 TKSGB 9-27, shot v9. 5, honeycomb v 2.02
Click to expand...
Click to collapse
I rarely use it on the inc 2, does the fassy come with a recovery and can I just use it to flash and backup stuff instead of clockwork anyways?
Sent from my ADR6350 using XDA App
na its useless...you need cwm to install zips and nandroid backup.
Thanks so much guys, yall are awesome, I'm still waiting on the phone, should be here any day, if you need any help for the inc 2 for any reason pm me I will be more than glad to help...
Sent from my ADR6350 using XDA App
HI everyone
I have samsung galaxy s2 AT&T SGH-I777 Cyanogen mod 7.1 versione android 2.3.7
I notice almost everyone have already last version 4.0.3 so the question when will be avaiable for cyanogen 7???
I have one rom manager PRO and i tried to check if avaiable new update but still not yet but im afraid that rom manager wont work or maybe coming too much delay?
Someone could please explain me about it?
Thank
You need cyanogenmod9 not 7. 7 is gingerbread and 9 is ics
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Alan2012 said:
HI everyone
I have samsung galaxy s2 AT&T SGH-I777 Cyanogen mod 7.1 versione android 2.3.7
I notice almost everyone have already last version 4.0.3 so the question when will be avaiable for cyanogen 7???
I have one rom manager PRO and i tried to check if avaiable new update but still not yet but im afraid that rom manager wont work or maybe coming too much delay?
Someone could please explain me about it?
Thank
Click to expand...
Click to collapse
in short, CM7 is based off Gingerbread and CM9 is based off ICS. If you want ICS, flash CM9 or one of the other roms in the dev section(s).
CM9
http://forum.xda-developers.com/showthread.php?t=1568848
Other ROM's you may want to try:
http://forum.xda-developers.com/forumdisplay.php?f=1304
http://forum.xda-developers.com/forumdisplay.php?f=1521
Alan2012 said:
HI everyone
I have samsung galaxy s2 AT&T SGH-I777 Cyanogen mod 7.1 versione android 2.3.7
I notice almost everyone have already last version 4.0.3 so the question when will be avaiable for cyanogen 7???
I have one rom manager PRO and i tried to check if avaiable new update but still not yet but im afraid that rom manager wont work or maybe coming too much delay?
Someone could please explain me about it?
Thank
Click to expand...
Click to collapse
You need to read around a LOT more.
First off, don't use ROM Manager on a Galaxy S2.
Second, no, there is no version of 4.0.3 for CM7 because cm7 itself is 2.3.7. What you want is CyanogenMod 9.
EDIT: Ninja'd! That took me much longer to type than I thought it did. :S
Has anyone mentioned to you that you need cm9 for ics?
Oh there it is.
Sent from my HTC One XL using Tapatalk 2
hmmm so i have to flash cm9 but is stable ? Too bad that im not good experience how to flash (cause i didnt even tried first time...i got cyanogen from china already installed).
I dont wanna finish brick or tilt telephone lol maybe i have to give support if someone know how to work this update.....is true talking about Mod is not automatic update need always do something manual...like odin ( i dont know either how to use odin anyway but i heard most ppl use it)
Edit= worse im not good english either but italian doh..
Alan2012 said:
hmmm so i have to flash cm9 but is stable ? Too bad that im not good experience how to flash (cause i didnt even tried first time...i got cyanogen from china already installed).
I dont wanna finish brick or tilt telephone lol maybe i have to give support if someone know how to work this update.....is true talking about Mod is not automatic update need always do something manual...like odin ( i dont know either how to use odin anyway but i heard most ppl use it)
Edit= worse im not good english either but italian doh..
Click to expand...
Click to collapse
Unfortunately my Italian isn't very good. But you should do some reading before trying anything
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Nick281051 said:
Unfortunately my Italian isn't very good. But you should do some reading before trying anything
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Ya i know if possible manual italian will help me a lot but for english sometime i could do mistake by step to step for installing things with this phone....
last question if need put cm9 i will lost all data progress during games isnt? I know some people its say need use TB for backup up but i dunno if this help.
Also why dont use rom manager? the user mattdm suggest me for dont use rom manager...maybe is not a good things? was already installed when i buy first time this new phone.
Alan2012 said:
Ya i know if possible manual italian will help me a lot but for english sometime i could do mistake by step to step for installing things with this phone....
last question if need put cm9 i will lost all data progress during games isnt? I know some people its say need use TB for backup up but i dunno if this help.
Also why dont use rom manager? the user mattdm suggest me for dont use rom manager...maybe is not a good things? was already installed when i buy first time this new phone.
Click to expand...
Click to collapse
You can use TB to backup apps and data. Just remember when you're restoring apps on your new rom, DO NOT restore system apps/data. It will royally screw things up. The best course of action would be to manually select which games/apps to restore with data. The rest of your apps you should just redownload from the Play Store.
As for ROM Manager, it can just mess things up on this phone. You don't need it though...you can do everything you need to do with CWM Recovery or Mobile Odin.
mattdm said:
You can use TB to backup apps and data. Just remember when you're restoring apps on your new rom, DO NOT restore system apps/data. It will royally screw things up. The best course of action would be to manually select which games/apps to restore with data. The rest of your apps you should just redownload from the Play Store.
As for ROM Manager, it can just mess things up on this phone. You don't need it though...you can do everything you need to do with CWM Recovery or Mobile Odin.
Click to expand...
Click to collapse
Ok perfect so...for the moment cyanogen 7 its seems stable but for 9 i know there should have some bugs...maybe ill wait when is stable.
but i have to find a way how to update 4.0.3 if need cyanogen 9 ya
Alan2012 said:
Ok perfect so...for the moment cyanogen 7 its seems stable but for 9 i know there should have some bugs...maybe ill wait when is stable.
Click to expand...
Click to collapse
CM9 is already stable.
Alan2012 said:
but i have to find a way how to update 4.0.3 if need cyanogen 9 ya
Click to expand...
Click to collapse
I'm not quite sure what you're saying here...all you have to do it flash CM9 in CWM...
EDIT: But make a nandroid backup first!
CMW = ClockWorkMod
Also, should he not follow the basic instructions for first time flashers so he can undo whatever the hell the Chinese dude did?
Sent from my SGH-I777 using XDA
clay101eve said:
CMW = ClockWorkMod
Also, should he not follow the basic instructions for first time flashers so he can undo whatever the hell the Chinese dude did?
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Probably a good idea.
Sent from my SGH-I777 using xda premium
@matt,
I thought ROM Manager still works perfectly for any CyanogenMod ROM, CM7 or CM9. It's just highly recommended NOT to use with any other ROM that not-CM.
@OP, I strongly suggest you spend much more time reading and make sure you understand the whole process of making the CM9 on your device. In fact, it will save you more time than just keep flashing it, bricking it and hunting for help.
votinh said:
@matt,
I thought ROM Manager still works perfectly for any CyanogenMod ROM, CM7 or CM9. It's just highly recommended NOT to use with any other ROM that not-CM.
@OP, I strongly suggest you spend much more time reading and make sure you understand the whole process of making the CM9 on your device. In fact, it will save you more time than just keep flashing it, bricking it and hunting for help.
Click to expand...
Click to collapse
For cm7 it was okay for downloading but not flashing as i understood it but cm9 can make full use of it. Correct me if I'm wrong anyone.
votinh said:
@matt,
I thought ROM Manager still works perfectly for any CyanogenMod ROM, CM7 or CM9. It's just highly recommended NOT to use with any other ROM that not-CM.
Click to expand...
Click to collapse
Yeah I've heard that...I just feel like there's no reason to choose it over methods that always work.
Sent from my SGH-I777 using xda premium
mattdm said:
CM9 is already stable.
I'm not quite sure what you're saying here...all you have to do it flash CM9 in CWM...
EDIT: But make a nandroid backup first!
Click to expand...
Click to collapse
But flash Cm9 in CWM...
CWM mean rom manager inst? Sorry but wasnt clear :/ or maybe u mean Clockworkmod...but its seesm connect rom manager if im not wrong...
But first to start flash doesnt need change kernel or gapps too? i need more info about it before to do my mistake..
Alan2012 said:
CWM mean rom manager inst? Sorry but wasnt clear :/ or maybe u mean Clockworkmod...but its seesm connect rom manager if im not wrong...
Click to expand...
Click to collapse
CWM means ClockworkMod. Don't use Rom Manager.
Alan2012 said:
But first to start flash doesnt need change kernel or gapps too? i need more info about it before to do my mistake..
Click to expand...
Click to collapse
If you already have a kernel with ClockworkMod, you don't need to worry about flashing one before flashing CM9.
Here is what you need to do:
1. Nandroid backup.
2. Download latest CM9 and GAPPS
3. Do a full wipe in ClockworkMod
4. Flash CM9 in ClockworkMod
5. Flash GAPPS in ClockworkMod
mattdm said:
CWM means ClockworkMod. Don't use Rom Manager.
If you already have a kernel with ClockworkMod, you don't need to worry about flashing one before flashing CM9.
Here is what you need to do:
1. Nandroid backup.
2. Download latest CM9 and GAPPS
3. Do a full wipe in ClockworkMod
4. Flash CM9 in ClockworkMod
5. Flash GAPPS in ClockworkMod
Click to expand...
Click to collapse
Thank you for quick reply i would like to ask u more info if possible:
1.So for doing backup its ok to use rom manager like backup all? or need to find one called Nandroid backup? doesnt do much different?
2. for CM9 maybe is not yet stable because someone its say for making video doesnt work yet at all isnt?
Alan2012 said:
Thank you for quick reply i would like to ask u more info if possible:
1.So for doing backup its ok to use rom manager like backup all? or need to find one called Nandroid backup? doesnt do much different?
2. for CM9 maybe is not yet stable because someone its say for making video doesnt work yet at all isnt?
Click to expand...
Click to collapse
you know what ROM manager is?
ITS A GUI INTERFACE FOR CWM
you can boot into CWM directly and do anything that ROM manager can do except download the rom....
we have stickies outlining all this stuff already, not sure why thats a totally new concept for folks these days
my friend gave me a bricked SGH-i777 and i unbricked it and now its running GB UCKH7 on Android version 2.3.4 and Kernel 2.6.35.7 i rooted this phone already with and all in one i777 rooter+odin and everything is working fine i need help on the following i looked all over the forum and it is getting confusing i used to flash and mod the old htc fuze with Nrgz28
1.Is ICS worth the trouble?
2.how to install CWM Recovery
3. the rom you install does it come with GB either ICS or you install the rom after you install DB or ICS ?
jzrocket205 said:
my friend gave me a bricked SGH-i777 and i unbricked it and now its running GB UCKH7 on Android version 2.3.4 and Kernel 2.6.35.7 i rooted this phone already with and all in one i777 rooter+odin and everything is working fine i need help on the following i looked all over the forum and it is getting confusing i used to flash and mod the old htc fuze with Nrgz28
1.Is ICS worth the trouble?
2.how to install CWM Recovery
3. the rom you install does it come with GB either ICS or you install the rom after you install DB or ICS ?
Click to expand...
Click to collapse
You my friend need to read. A lot. Not trying to be a **** but you don't even have the basics down and I don't want you to mess up your device.
Sent from my Zanpakuto using Getsuga Tensho!
can you please link me i been reading the whole day getting confused now..
I would recommend first getting the ota 4.0 ICS update from att. Upgrading from ICS to Jb is a lot easier and smoother. From opinion upgrade in CWM not Odin. Cwm is harder to hard brick device like Odin does. As long as you have Cwm you can recover soft brick. To get Cwm the easiest way it to find a kernel and use Odin to install it. Once you have Odin your free to try what you want. I prefer the new JB leak. Good luck
Sent from my SGH-I777 using xda app-developers app
cyberbandit1998 said:
I would recommend first getting the ota 4.0 ICS update from att. Upgrading from ICS to Jb is a lot easier and smoother. From opinion upgrade in CWM not Odin. Cwm is harder to hard brick device like Odin does. As long as you have Cwm you can recover soft brick. To get Cwm the easiest way it to find a kernel and use Odin to install it. Once you have Odin your free to try what you want. I prefer the new JB leak. Good luck
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Also not trying to be a ****, but I would advise you too to read a lot more. (OP pay attention too) Flashing a custom kernel with Odin will trip the flash counter, something not easily reset and something you're much better off avoiding. And there should be no problems upgrading from GB straight to JB if you flash ROMs via CWM, so I have no idea what you're talking about when you say the OTA to ICS should come first.
To OP, I will give three points of advice. Please heed them well, and remember that they are for your own protection and benefit, not mine.
1. Never, ever, EVER, I MEAN GOD FORBID EVER, use ROM Manager on an SGH-I777. NEVER!
2. CWM is built into custom kernels for I777. It is not separate, so do not try to update it unless you want to flash a new/different custom kernel. Again, NEVER.
3. Read this guide at least 3 times completely, until you fully understand everything in it, before attempting to further modify your phone.
Now, if you finish everything I said and still have questions, feel free to ask after then and I will try to help you. Good luck and Merry Christmas! Oh, and hit the thanks button if you find my advice useful, please
First welcome to a whole new world. I also used the Fuze for a while and Android is a whole new beast. Forget what you think you know and start fresh. Spend a day or 2 reading the threads. They may not make Sense at first but they will after you read a bit.