I recently switched radios and went to 2.0 and installed the BAMF sense 3.0 rom. All was okay, wifi wasn't working so I switched to a different BAMF gingerbread rom and noticed 3g wasn't working.
Then I switched back to my old configuration, factory rom and radio so I could diagnose what my issue was. I saw fixes online posted when eHPRD was down to dial ##778# enter the password and then disabling eHPRD and going to "enabled". This fixed my issue.
So here comes my question. If 3g only works when eHPRD is disabled is it my sim that is broken? ALSO I cant check if 4g works because I used phone info to change to "CDMA auto (PRL)" and I can't switch back to the LTE mode because my network types are really odd. Are these options different because of CM7 or because I have eHPRD disabled, or because my sim is likely dead?
Pic of network type options from the Phone Info screen is attached.
Don't take this offensively, but did you try scrolling the window down? I see in your pic there are lower options not visible in the window without scrolling.
Just checking all bases
Always safe to check! The last 3 options are "evdo only" "gsm/cdma auto (prl)" and "unknown"
I didn't bother to post them because before I had about 4 different options I think, I have no idea how I got all these random options. Is it kernel related, radio related, rom related, or dead sim related -_-
Hmm ok just checking.
Well that is very odd indeed. I am running MR2 + Das BAMF Gingerstripped with Imoseyon 3.4.0 GB Sense lean kernel and do have some odd connectivity issues, even with 3g. I'm going to go out on a limb here and say it might be advisable for you to reflash the radio, then reflash the ROM and do a full data wipe factory reset. I mean that sounds like a very bad problem and personally dealing with Verizon and SIM cards is a royal PITA which you should leave as a last resort. So try doing a completely fresh install imo. It's the only way to rule out any uncertainty.
DaRkL3AD3R said:
Hmm ok just checking.
Well that is very odd indeed. I am running MR2 + Das BAMF Gingerstripped with Imoseyon 3.4.0 GB Sense lean kernel and do have some odd connectivity issues, even with 3g. I'm going to go out on a limb here and say it might be advisable for you to reflash the radio, then reflash the ROM and do a full data wipe factory reset. I mean that sounds like a very bad problem and personally dealing with Verizon and SIM cards is a royal PITA which you should leave as a last resort. So try doing a completely fresh install imo. It's the only way to rule out any uncertainty.
Click to expand...
Click to collapse
Yeah I forgot to mention that I have reflashed back to the older radios and to the news, I have tried seemingly every combination. The only way I can get 3g to work is to disable the eHPRD.
DaRkL3AD3R said:
I'm going to go out on a limb here and say it might be advisable for you to reflash the radio, then reflash the ROM and do a full data wipe factory reset. I mean that sounds like a very bad problem and personally dealing with Verizon and SIM cards is a royal PITA which you should leave as a last resort. So try doing a completely fresh install imo. It's the only way to rule out any uncertainty.
Click to expand...
Click to collapse
+1
I had a similar situation on a different rom. Everything was working fine until I updated to a newer rom build, and I lost 4G. I figured it was verizon messing with the towers, so I didn't worry about it. But two days later, I still had no 4G (I still had 3G). I went on a weekend trip to another 4G area, and no dice. I flashed every combo of rom & radio and couldn't get it to work. When I got back home, I went to verizon & swapped sim cards, and still no 4G. I finally went back to bone stock and got 4G again. I have no idea why this happened, but be prepared to go back to stock if reflashing & sim swapping doesn't help.
Sent from my ADR6400L using XDA App
It appears you both were right. Went back to complete stock and I have 3g working in eHPRD mode. Willing to bet 4g works again too. Thanks for the help...I guess I will update this thread if I find anything new out.
Just as an update...not sure what I might have done wrong before...
But I went back to stock with root, then went to the CM7 that worked with MR1, then I went to CM7 that worked with MR2, then I put MR2 in.
Everything is working perfectly now.
Glad its working fine. I personally wouldn't advise messing with any particular Radio settings aside from switching it from CDMA + LTE/EVDO to CDMA auto (PRL). Anything else and you're just opening up a can of worms that no one really knows anything on.
Related
I flashed my Verizon XV6800 to DCD 3.1.2 Radio 3.39..
I have always had 1 bar at home and barely one bar at my office. with my last 3 phones reception was identical. I'd drop maybe every 10th - 15th call at home and every 5th - 10th call at my office. This was no big deal, I'd call back and finish. Text messages / MMS incoming calls were always reliable. (Rarely an incoming call would just go to voicemail and not ring)
SO..
I flashed my 6800.. Everything works great everywhere except the office. I can’t receive Text messages.. Maybe every hour or so, 30 Texts will flood in at once. (I get a lot of text messages from server monitoring software.) My Phone will not ring any longer(only at the office). All incoming calls go to voicemail. I assume that since the Office had poor reception.. losing just a bit of signal would knock me out completely.
Anyway.. GPS doesn’t help if I can’t get calls where I need them the most, so I flashed back to stock... and I STILL have this issue. My phone no longer works at my office.
I have ruled out coincidental tower issues in the area.. my co-worker has the same phone with untouched stock software.
In debug, our signals are identical. All other version numbers and settings are identical. His phone works fine. When sending a Text through vtext.com to both phones, his gets the message immediately, my phone will receive it after an hour or longer.. sometimes 3 or 4 hours later. Outgoing calls drop after 30 seconds.. the phone is now unusable at the office.
Other than swapping out the phone... can anyone tell me if there are any settings i can compare or check on? Perhaps the reflash back to stock kept some settings or something? I know there are tweaks like setting how often your phone polls the tower for a call etc... Things like this could have an effect maybe?
Anyway.. After 2 days of searching and playing with settings.. I figured I was better off with 3.1.2 / 3.39 since the phone dont work anymore at the office anyway. so now I'm back to that.
should I try 3.35 or 3.37 Radio??
Any advice would be much appreciated.
Did you install the Verizon Carrier cab?
Yes on the 3.1.2 firmware.
Obviously not when I flashed back to the stock because it doesn't need it.... right?
Also.. I used a PPCGeeks Thread for the Flashing back to stock. (Maybe this helps)
http://forum.ppcgeeks.com/showthread.php?t=21161
Yes on the 3.1.2 firmware.
Obviously not when I flashed back to the stock because it doesn't need it.... right?
Click to expand...
Click to collapse
Right. Have you tried OTA programming?
Yeah, Each time I've flashed.. I first run the OTA both option 1 and 2. then I usually need to call VZW for my AKey, or to reset the data Services because they do not work.. they have been cool each time though
I haven’t actually tried OTA FROM the office... because i cant hold a call long enough to have it complete. I'm not sure if the location matters though.
I can certainly get the phone swapped, but the first thing i'll wanna do with the new one is try DCD 3.1.2.. Unless there is a recommendation on a different Rom / Radio?
I've read a good many of your posts on other threads and you seem to be good at this stuff... so I'm willing to try whatever you recommend.
Also I seriously appreciate your time.
Go into Device Information in Settings and list me your PRL Version and PRI Version.
gc14 said:
Go into Device Information in Settings and list me your PRL Version and PRI Version.
Click to expand...
Click to collapse
PRL 51056
PRI 1.35_002
Ok try rolling back to the 51020 PRL.
Download the attached file, unzip the PRL, and copy it to your phone.
Dial ##775 send.
Enter 000000 for unlock code.
Tap the box underneath Setting to highlight it, then click Menu->Edit.
Browse to where you put the prl file (51020.prl), and open it, then click OK.
Click Menu->Ok to update it and let the device reset.
See if this helps your issues.
I get Turn on LPM failed.
Maybe I should not try it from the storage card... let me try again.
** Update: It did update the PRL when i moved it off the SD Card.
However I sent 3 text messages and called the phone twice from my desk.. No change.
x51 said:
I get Turn on LPM failed.
Maybe I should not try it from the storage card... let me try again.
** Update: It did update the PRL when i moved it off the SD Card.
However I sent 3 text messages and called the phone twice from my desk.. No change.
Click to expand...
Click to collapse
did you recently get an aluminum or metal case?
also, what is your slot cycle index under modem settings in EPST?
Actually I have a custom case I made myself out of Lead.. it gives the phone a nice weight.. LOL.. No... No cases or anything.. However.. I know this should be irrelevant but..
I went on vacation for a week and got an extended battery the day I was leaving. The day I got back I flashed my phone FROM stock.
Had my issues at the office..
Flashed Back...
Still had issues...
Decided that.. MAYBE the extended battery being thicker and all is blocking signal... Swapped back to normal battery.. No good.
Went back to DCD312
Slot Cycle was 2... I just now changed it to 1 and it makes no difference.
did you happen to flash the stock RADIO with the stock ROM? flashing back the stock radio would most likely screw your device, but ive flashed the stock ROM several times with no problems.
try flashing to the current radio 3.39. heres just the radio, without the Sprint ROM. Radio 3.39
it can be tricky flashing it without a non-SDHC card. PM me if you dont have one.
after that, just flash a compatible ROM and it should fix everything.
Well the whole procedure was this:
1) Stock phone
2) Run unlocker
3) Flash 3.1.2 rom
4) Device locks at boot
5) Flash 3.39 Radio from SD Card
5a) Ran VZW Provider Cab.. from DCDs 3.1.2 page.
6) Had the reception issues mentioned.
7) Run Titan Relocker
8) Flash Stock VZW Rom that includes original Radio Version.
9) Reception Issues remain. (Lived with it for 2 days)
10) Repeat steps 1-5a above.
so I'm on 3.1.2 / 3.39 again right now.
I CAN flash the radio again... I guess... i already have it on a 512 SD card ready to flash.
Outside of DCD 3.1.2 What would you say is the most recommended / stable Rom / Radio Combo?
x51 said:
1) Stock phone
2) Run unlocker
3) Flash 3.1.2 rom
4) Device locks at boot
5) Flash 3.39 Radio from SD Card
5a) Ran VZW Provider Cab.. from DCDs 3.1.2 page.
Click to expand...
Click to collapse
you need to flash the radio before you flash the ROM
aguas said:
you need to flash the radio before you flash the ROM
Click to expand...
Click to collapse
Yeah I read that somewhere.. but the instructions I followed had me flash the rom, wait for the device to lock up on the verizon screen... then use PWR+CAM+RESET and flash the radio.
Even if it were in the wrong order, wouldnt flashing back to the VZW Stock Rom that includes the original stock radio still work as it did previously?
(maybe the answer is obviously not?.. Perhaps I sould reflash everything in a different order?)
So I flashed back to Stock again last night. Had to call and have data services and AKey reset... as usual.
I'm at the office now, and so far I had several people send me test SMS and only one of them took a while to show up. The others came in pretty fast.
Here are the differences between this time, and the last time I flashed back to stock.
1) I DID NOT install any applications at this point... I have ONLY Configured my Exchange Activesync Email.
2) I do not have the extended battery installed.
3) I reset before the verizon custom cabs installed from the stock ROM.
It's only been 10 minutes, but so far it looks promising... I'll update if that changes.
**UPDATE
Still can not hold a call... Text messages are now taking 10 - 20 minutes to arrive. My co-worker with the same phone still has no issues. Will stop by Verizon after work to have it swapped.
Stopped at Verizon.. Explained that the phone worked most places but just not at my office.. Explained that my co-worker has the same phone and does not have issues.
I expected to get a lot of crap.. but they were cool. They tested the phone, and claimed there was an issue. They didn't have any in stock, and have to mail me a new one.
SO... I havent seen many people complain about reception issues with thier radio upgrades... I'm wondering, should I upgrade the Roms and radio on the new one? Should I assume my reception issue was hardware and not caused by the software?
I'm still hoping someone with a lot of Rom experience can provide me with some recommendations.. I hear GPS Locks are flaky on DCD3.1.2..
Okay, I live in Grand Rapids area if that makes any difference. But everything was running fine and dandy on BAMF stripped 2.1. Then, yesterday, my data cut out completely. Wouldn't come back with a reboot, multiple toggles from data on/off, battery pull, nothing worked. So I decided I'd switch ROMS to Gingertheory 4.5. That worked for a little bit, but then it cut out again. So then I switched from the MR2 radio to MR2.5. That also worked for a little bit, but now it's cut out again. I feel like it might be a hardware issue... I don't know what to do!! Heeelllllppppppppp!!!
xCHPx said:
Okay, I live in Grand Rapids area if that makes any difference. But everything was running fine and dandy on BAMF stripped 2.1. Then, yesterday, my data cut out completely. Wouldn't come back with a reboot, multiple toggles from data on/off, battery pull, nothing worked. So I decided I'd switch ROMS to Gingertheory 4.5. That worked for a little bit, but then it cut out again. So then I switched from the MR2 radio to MR2.5. That also worked for a little bit, but now it's cut out again. I feel like it might be a hardware issue... I don't know what to do!! Heeelllllppppppppp!!!
Click to expand...
Click to collapse
Try removing the SIM card and putting back in, or (as in my case) the SIM card had gone bad and needed to be replaced at the Verizon store.
xCHPx said:
Okay, I live in Grand Rapids area if that makes any difference. But everything was running fine and dandy on BAMF stripped 2.1. Then, yesterday, my data cut out completely. Wouldn't come back with a reboot, multiple toggles from data on/off, battery pull, nothing worked. So I decided I'd switch ROMS to Gingertheory 4.5. That worked for a little bit, but then it cut out again. So then I switched from the MR2 radio to MR2.5. That also worked for a little bit, but now it's cut out again. I feel like it might be a hardware issue... I don't know what to do!! Heeelllllppppppppp!!!
Click to expand...
Click to collapse
Try *228 and update your PRL. if that doesn't work. ..
Try installing a Froyo Rom.. (I would recommend MR2 Froyo 1.66 plainjane by Jcase).
See if that works.. Data issues are usually radio/sim card etc.. more than ROM.. but it could be ROM too..
dpdurst said:
Try removing the SIM card and putting back in, or (as in my case) the SIM card had gone bad and needed to be replaced at the Verizon store.
Click to expand...
Click to collapse
Just tried that. Now only getting 1X.
kriskmk said:
Try *228 and update your PRL. if that doesn't work. ..
Try installing a Froyo Rom.. (I would recommend MR2 Froyo 1.66 plainjane by Jcase).
See if that works.. Data issues are usually radio/sim card etc.. more than ROM.. but it could be ROM too..
Click to expand...
Click to collapse
Just updated PRL. Still only 1X. I can't find MR2 plainjane...
xCHPx said:
I can't find MR2 plainjane...
Click to expand...
Click to collapse
go here http://www.androidpolice.com/2011/0...2-links-to-stock-unrooted-custom-rooted-roms/
and under rooted Custom Roms.. look for PlainJane
Still nothing after switching to plainjane....
Sent from my ADR6400L using XDA App
I had this happen to me a while back on my first TBolt - I ended up having to replace it.
If this just started yesterday are you sure there isnt network issues in your area?
Mustang302LX said:
If this just started yesterday are you sure there isnt network issues in your area?
Click to expand...
Click to collapse
Well 3g or 1x will pop up every once in awhile for a short moment, but then it will go away again... The rest of the time I have absolutely no data, not even 1x.
Sent from my ADR6400L using XDA App
...anybody? or is my baby broken?
I'm going back to plainjane v1 and the 223r radio. See how that works. If that doesn't work, then idk what. I'll probably need a new TB... :'(
xCHPx said:
...anybody? or is my baby broken?
I'm going back to plainjane v1 and the 223r radio. See how that works. If that doesn't work, then idk what. I'll probably need a new TB... :'(
Click to expand...
Click to collapse
Didn't work. I have consistent 1x though! Hoping for just an outage...
Damn TB always has data issues. I would just wait it out
biglipps66 said:
Damn TB always has data issues. I would just wait it out
Click to expand...
Click to collapse
Well, I guess you were right. While all my friends had data, I did not. It came back today...
My SIM died on me this morning. I was basically sitting in the shadow of a tower and could not get data, even though i had full bars, until i switched to CDMA only mode. Stopped by the vzw store after work, tested my SIM in another TB, did the same thing, 10 minutes later I was leaving with a new SIM and working 3G
Ok... I'm fairly new to ROMs... but I've loaded Das BAMF 2.1, and Das BAMF 3.0 RC3 and recently RC4... first used MR2.5, but during an attempt to load CM7 RC1.1 I got no radio... so I loaded MR2... but still no Radio. And of course went back to Das BAMF 3.0. I found MR2 to work better for me.
I attempted to reload CM7 again. Double checked the MD5 Sum. Then did the following:
Wipe device, wiped Cache, wiped Dalvik cache.
Installed CM7 RC1.1, installed GAPPS
Booted up... no radio... let it sit for 10 minutes... no radio
Reloaded MR2 radio... booted up... let it sit again... no radio... I get maybe 2 bars, but no LTE/3G or any data.
I'm stumped... I'm back up on Das BAMF 3.0 RC4 with MR2 radio, full LTE and 5 of 6 bars at home.
Any suggestions for getting CM7 to work.... PLEASE!!!!
When you had no data after flashing the CM7 (MR2+ version since that's your radio) did you try going to Settings->Wireless&Networks->Mobile Networks and switching to CDMA/EVDO Auto? I would have done that first. Might get it working for you. You can switch back to LTE after you get a signal (if you do).
Absolute_Zero said:
When you had no data after flashing the CM7 (MR2+ version since that's your radio) did you try going to Settings->Wireless&Networks->Mobile Networks and switching to CDMA/EVDO Auto? I would have done that first. Might get it working for you. You can switch back to LTE after you get a signal (if you do).
Click to expand...
Click to collapse
A good suggestion. Also make sure your back cover is always on as it finishes the antenna's circuit If neither of these things fix the issue, I'll help you dig deeper into it.
Absolute_Zero said:
When you had no data after flashing the CM7 (MR2+ version since that's your radio) did you try going to Settings->Wireless&Networks->Mobile Networks and switching to CDMA/EVDO Auto? I would have done that first. Might get it working for you. You can switch back to LTE after you get a signal (if you do).
Click to expand...
Click to collapse
I will give this a try tonight... yes, it's the MR2+ version of CM7 RC1.1.
And yes, I have a tight fit on the battery cover... I've only taken the battery cover off twice (first when I got the device and second to pull the SD Card temporarily)... I get great signal strength with my current ROM and the same radio - MR2.
I'll report back tonight.
I downloaded RC1.2 and did the same thing I did above... and it worked... no issues except I'm only showing one bar... looks like I've got some reading to do.
If you know anything about the one bar I'd like to know... this is at work where I usually see 3 or 4 bars.
CM7 will show lesser bars than any sense ROM. It doesnt make a difference in signal strength or connectivity.
Sent from my ThunderBolt using XDA Premium App
Hi! I was wondering if anyone is experiencing this problem. I should be having full 3G all the time where I am right now, but my phone will sometimes switch to "1X" and then once i load something data it switches back to 3G, but just gets kind of annoying to see. It has loaded the 1X also, it doesn't always switch back to the 3G immediately.
This has been going on for a while, and I have done a ESN swap with another smartphone but it still does it.
Any ideas/suggestions?
Oh, and I am not sure if this has anything to do with anything, but sometimes when i reboot my phone my 3G icon just DOESN'T APPEAR AT ALL, so i have to power down and back up. Is this normal? I am on MIUI 1.7.29, and it has done it on other previous roms before. Just GETS ANNOYING.
Try to Turn Off The Phone. Then Leave It Off For 5minutes.
If That Doesn't Work Try To Do A Factory Reset Or Re-install Your Rom (If your using one)
Hate to say it, but I've had my phone since last November and it has always done this. The radio in our phones doesn't do such a good job of grabbing signal. I can have full bars 3G one second and no bars 1x the next. No combination of Roms/Kernels/Radios or ESN swaps have ever fixed this for me. I have just learned to accept it and deal with it. You can try to bring this up with Verizon and they might send you a new one, but it will likely have more problems. Sorry to be a downer but that's just how it is.
Zacisblack said:
Hate to say it, but I've had my phone since last November and it has always done this. The radio in our phones doesn't do such a good job of grabbing signal. I can have full bars 3G one second and no bars 1x the next. No combination of Roms/Kernels/Radios or ESN swaps have ever fixed this for me. I have just learned to accept it and deal with it. You can try to bring this up with Verizon and they might send you a new one, but it will likely have more problems. Sorry to be a downer but that's just how it is.
Click to expand...
Click to collapse
This isn't the answer I wanted to hear, but it is a realistic one and I appreciate the honesty. I had a feeling that this is just something that is on our phones end.
Yeah these phones definitely aren't "perfect", i mean how could they be if they make a new one every 2 seconds,
Elluzion said:
This isn't the answer I wanted to hear, but it is a realistic one and I appreciate the honesty. I had a feeling that this is just something that is on our phones end.
Yeah these phones definitely aren't "perfect", i mean how could they be if they make a new one every 2 seconds,
Click to expand...
Click to collapse
my recomendation is:
- flash the ec09 modem via odin( the ec09 modem is NOT the problem for borked sd cards)
- boot phone
-*228 option 2
Im currently running the powerwashed v1 rom, pbj novoodoo kernal, ec09 modem and I have not missed a call or had my data switch to 1x in almost 2 weeks now.
Zacisblack said:
Hate to say it, but I've had my phone since last November and it has always done this. The radio in our phones doesn't do such a good job of grabbing signal. I can have full bars 3G one second and no bars 1x the next. No combination of Roms/Kernels/Radios or ESN swaps have ever fixed this for me. I have just learned to accept it and deal with it. You can try to bring this up with Verizon and they might send you a new one, but it will likely have more problems. Sorry to be a downer but that's just how it is.
Click to expand...
Click to collapse
Have you tried a ed05 rom, kernal, ec09 radio?
droidstyle said:
my recomendation is:
- flash the ec09 modem via odin( the ec09 modem is NOT the problem for borked sd cards)
- boot phone
-*228 option 2
Im currently running the powerwashed v1 rom, pbj novoodoo kernal, ec09 modem and I have not missed a call or had my data switch to 1x in almost 2 weeks now.
Click to expand...
Click to collapse
I'm on miui with ed01 currently, would i just be able to flash the ec09 radio over that?
Sent from my I500 using XDA App
Elluzion said:
I'm on miui with ed01 currently, would i just be able to flash the ec09 radio over that?
Sent from my I500 using XDA App
Click to expand...
Click to collapse
Thats what I did on powerWash, just flashed the ec09 over ed05 radio via odin.
droidstyle said:
Thats what I did on powerWash, just flashed the ec09 over ed05 radio via odin.
Click to expand...
Click to collapse
So I flashed the EC09 radio that you recommended and did the *228 option 2 and it said successful, then I did a power down, power up, and my 3G disappeared;/ , so i powered down, powered up again and the 3G was back, so far it has been decent, but in my house I had the 1x locked for a good 30 seconds before switching back to 3G, on the ED01 radio it would normally switch back faster than that. so I don't think it worked :/,
any other options?? (or should I try to get Verizon to send me a new phone?)
I don't know if its just me but I no longer have 4G on my TB. I've been using the 704 Radio for a long time and never had issues with 4G. All of a sudden today, no matter what rom I load, I have no 4G. I did call Verizon today for some personal info and there was a recording regarding issues with devices but I forgot to get more info on it. I know I have 4G coverage in my area so idk what's going on..Can anyone Chime in and lmk what they're experiencing..Thanks
i havent had any issues with mine today, have you tried to flash a different radio? or perhaps you should try the ##778# method to turn off 4g and switch the cdma only and then revert back
Moved to Q&A
^ +1
Aside from the typical cliche of reminding you to put your flame suit on, has one considered that it may be location related and had you checked a local Verizon store to determine if their 4G units are experiencing like problems?
The key to basic troubleshooting is to rediscover the basic fundamentals of the obvious solutions, available to you, prior to stepping to the in-depth possibilities that may exist otherwise. - shawnathan9
Sent from my ADR6400L using XDA Premium App
NyPlaya513 said:
i havent had any issues with mine today, have you tried to flash a different radio? or perhaps you should try the ##778# method to turn off 4g and switch the cdma only and then revert back
Click to expand...
Click to collapse
First off, Thanks for the quick tip with the ## thing..Didn't know about that..Secondly, I will try another radio, I think the Liquid rom does use the official MR2 radio..I'll try that and see..Thanks
04CiviCon20s said:
First off, Thanks for the quick tip with the ## thing..Didn't know about that..Secondly, I will try another radio, I think the Liquid rom does use the official MR2 radio..I'll try that and see..Thanks
Click to expand...
Click to collapse
Just a heads-up...radios are not included in roms. Rom threads simply state which radios they work with but it seems users think that means those roms are including the radio which is incorrect. You will need to flash a radio in bootloader (not recovery) if you want to try a different one.
Absolute_Zero said:
Just a heads-up...radios are not included in roms. Rom threads simply state which radios they work with but it seems users think that means those roms are including the radio which is incorrect. You will need to flash a radio in bootloader (not recovery) if you want to try a different one.
Click to expand...
Click to collapse
I've loaded dozens of roms and understand that Radios do not come with any rom. I also know how to flash radios as well. Thanks for your input anyways.
04CiviCon20s said:
I've loaded dozens of roms and understand that Radios do not come with any rom. I also know how to flash radios as well. Thanks for your input anyways.
Click to expand...
Click to collapse
I didn't mean to offend you or anything. Just a common mistake and something in the last comment made it sound like you thought they were in roms so I wanted to mention it. I suppose I read too much into it.
Try enabling Wifi for a while....then turning it off.
Every once in a while when I flash a new ROM (seems to happen more on AOSP based) it starts off in 1x, then LTE...then 3G.
Sometimes you just gotta let it settle... But I've found using WiFi, then turning it off and using the LTE on/off app (it's the same as the ##, just quicker) you can get LTE working.
Finicky....but it works...
04CiviCon20s said:
I don't know if its just me but I no longer have 4G on my TB. I've been using the 704 Radio for a long time and never had issues with 4G. All of a sudden today, no matter what rom I load, I have no 4G. I did call Verizon today for some personal info and there was a recording regarding issues with devices but I forgot to get more info on it. I know I have 4G coverage in my area so idk what's going on..Can anyone Chime in and lmk what they're experiencing..Thanks
Click to expand...
Click to collapse
Go back to MR2.5 704 is great in the cities, but it tightens up tolerances too much for other areas. Another issue with MR3 aka 704 is that 3G data is wicked touchy when your dealing with 96dbm and higher. MR2.5 was a release and I have good reason to believe the next radio release be it official/final or leaked will be more loose like 2.5
Again everyone's experience will very, speaking of averages here. Also
Thanks for all the feedback guys..Tried all the tricks but no go..I got 4G away from my home near work but I get here at home, No 4G. I called VZW and they verified I should have 4G in my area. I didn't wanna troubleshoot the TB w/tech support cuz it's rooted and the info they may ask for, will not be what they're expecting since am running custom rooted rom..ready5, I just loaded the 2.5 radio and No 4G still..IDK what's really going on?
approx how long ago was the last time you had 4G at your home? Did you change anything since then can can perhaps revert back to a previous backup. and just to confirm, on a fresh reboot you see absolutely no 4G at all from home
NY, I believe I had 4G w/CM7 and kobes rom..Am going to attempt to restore one of y backups and see..I have no clue what went south here..When I get to work, I do have 4G but again, my home area, no 4G and Am told by Verizon, Am supposed to have 4G. I just loaded UBER bamf and no 4G either. I located this confusing Thread(http://forum.xda-developers.com/showthread.php?t=1048128) and tried the GB d/lds and still no 4G
04CiviCon20s said:
NY, I believe I had 4G w/CM7 and kobes rom..Am going to attempt to restore one of y backups and see..I have no clue what went south here..When I get to work, I do have 4G but again, my home area, no 4G and Am told by Verizon, Am supposed to have 4G. I just loaded UBER bamf and no 4G either. I located this confusing Thread(http://forum.xda-developers.com/showthread.php?t=1048128) and tried the GB d/lds and still no 4G
Click to expand...
Click to collapse
just for testing purposes since I did have random radio issues in the past, try using the radio's from here http://forum.xda-developers.com/showthread.php?t=1048128
then give synergy rom a shot http://androidfilehost.com/XxXViRuS...rgy-thunderbolt-r181-signed-081611_152812.zip
here is the md5 to check it too : http://androidfilehost.com/XxXViRuS...thunderbolt-r181-signed-081611_152812.zip.md5