Hello Everyone,
I have a problem and i cant find it out, so i hope u can help me!
When i flash TW007 every time when it is booted it restart itself over and over again. After 15-20 sec it restart, i can input my pin and some times get signal
I did the following install
- install via SEUS (firmware 2.1.B.0.1 with BB 67)
- root and XrecoveryV0.3 via flashtool 2.9.1
- install rom via xrecovery (Factory Reset/Wipe Cache Partition/Format Cache/Wipe Dalvik Cache)
- install custom zip TW V008
I tried different basebands .54 .58 .67
I have this problem with the rom of wolfbreak (V007 and V008) and Achotjan_v05
When i flash Wolfbreak V006 or XShinyBread it works, and no restarts!!
Before i was on Wolfbreak V006 BB.58
All stock Kernel!
X10i
What am i doing wrong??????
Pls Help, i want to have V008 stock Kernel!!!
thx
sam20100 said:
Hello Everyone,
I have a problem and i cant find it out, so i hope u can help me!
When i flash TW007 every time when it is booted it restart itself over and over again. After 15-20 sec it restart, i can input my pin and some times get signal
I did the following install
- install via SEUS (firmware 2.1.B with BB 67)
- root and xrecovery via flashtool
- install rom via xrecovery (Factory Reset/Wipe Cache Partition/Format Cache/Wipe Dalvik Cache)
- install custom zip TW V008
I tried different basebands .54 .58 .67
I have this problem with the rom of wolfbreak (V007 and V008) and Achotjan_v05
When i flash Wolfbreak V006 or XShinyBread it works, and no restarts!!
Before i was on Wolfbreak V006 BB.58
All stock Kernel!
X10i
What am i doing wrong??????
Pls Help, i want to have V008 stock Kernel!!!
thx
Click to expand...
Click to collapse
Have you tried other 2.2 ROMs such as ____MIUI and 2.3 ROMS?
I tried this rom once and it works: MIUI_xperia_TripNRaVeR-v1.0.9.zip
Never tried 2.3 roms because no camera driver (i thought)
And i liked wolfbreaks rom!
Anything i could try?
Sent from my SEX10 using XDA App
I have tried some other rom and they keep rebooting or no signal before too, even though I am in the right BB. I guess for some rom it's just not meant to be used for the country you are at (because of service provided, etc)?
Hmm strange, Because Wolfbreak v006 works good.
I live in the Netherlands, can someone confirm working TW V008 rom or Achotjan rom in the Netherlands??
sam20100 said:
Hello Everyone,
I have a problem and i cant find it out, so i hope u can help me!
When i flash TW007 every time when it is booted it restart itself over and over again. After 15-20 sec it restart, i can input my pin and some times get signal
I did the following install
- install via SEUS (firmware 2.1.B with BB 67)
- root and xrecovery via flashtool
- install rom via xrecovery (Factory Reset/Wipe Cache Partition/Format Cache/Wipe Dalvik Cache)
- install custom zip TW V008
I tried different basebands .54 .58 .67
I have this problem with the rom of wolfbreak (V007 and V008) and Achotjan_v05
When i flash Wolfbreak V006 or XShinyBread it works, and no restarts!!
Before i was on Wolfbreak V006 BB.58
All stock Kernel!
X10i
What am i doing wrong??????
Pls Help, i want to have V008 stock Kernel!!!
thx
Click to expand...
Click to collapse
Wolf break will restart a few times when you first install it.
It does this to get signal and stabilize the BB.
Make sure your SIM is inserted.
Mine does this 8 to 12 times then it will become stable.
Yesterday, i left my phone alone for 20 min. So i think 15-20 reboots. But it not become stable...
Sent from my SEX10 using XDA App
You have to make sure you flash in the correct pattern with the correct rom.
Also if "Factory Reset/Wipe Cache Partition" then you don't need to format the cache again and wipe the dalvik partition.
I did this, is this the right way?
- install via SEUS (firmware 2.1.B with BB 67)
- root and xrecoveryV0.3 via flashtool 2.9.1
- install rom via xrecovery (Factory Reset/Wipe Cache Partition/Format Cache/Wipe Dalvik Cache)
- install custom zip TW V008
Then it keeps rebooting.
Now trying above.
(but no scard with in the phone while installing via SEUS)
and shall try more reboots 30 mins)
is it a idea to format SD-card?
I had the same problem.
Flashed custom kernell addon and the restarts stoped.
Thx All..
It works now,
For me the tric was to DISABLE SIM PIN!
Some how, when you disable the pin, the phone have more time to get signal and become stable before is restarts itself
(i also did get after entering the pin, Simnetwork lock popup)
I did fresh install Seus/Flashtool/Xrec. and boots 2 times to become stable!
I was trying since TW V008 came out so i'm happy now!
Related
Hi there.
I have problem with all ROMs. I used CyaNoComb v1.1. In CWM i tap fix permissions. When it get finished I reboot the phone, type the PIN and than... I openned some app and than error, I tried other app and than error too. I wiped data, patrition chache, dalvik cache, battery stats. Than I tried to install ROM(FroyoComb v1.6) and the phone several times stuck at bootanimation. Animation freezes and I can do nothing. I rebooted the phone, tried to go to Android but I can't. I several times tried to install ROM(few roms) but it do the same. Than i restored SE stock 2.1 from my backup and it works normally... Than i tried to do clean install of any rom but nothing changed. I restord from my backup and i want to update from SEUS but when I hold back and connected phone to PC it says:Failed to detect product. The product could not be identified. Please disconnect and try it again.
I tried several times but nothing changed. Please help, what should i do?
Can anyone upload his backup from clean install FroyoComb or other rom? THANKS
Are you aware that installing froyocomb 1.6 and slades - umm help me - 'slades' 6.0 as clean install (wipe user data) does not work as expected?
People who waited report, they waited about 1-2 hours until it finished.
This is a known bug and will be fixed soon.
So try prvious versions or better the CyaNo editions - this should work.
Maybe fixing permissions is no good idea in this roms. Use your backups to have a running systems - if you haven't any backup: why the hell not?
sent with my mini pro
I have backup only from Stock ROM... Going to try older versions...
edit: What a HELL?! Slade's better than Sonny Ericsson. CyaNo v1.3 booted perfectly. But I still prefer CyanoComb or FroyoComb
There is currently a problem with Froyocomb 1.6 and slades rom V6.... You cant just clean or fresh install them.... You should read the comments my friend lol but here is how u wud install froyocomb 1.6
From ure stock install root and xrecovery then wipe dalvik cache and factory reset wipe everything necessary then install froyocomb 1.5 .... Boot it once play around for a minute or two log in ure google account and then go back into xrecovery, wat u will notice is that it becomes orange and this is clockwork mod recovery better than xrec its still the same dnt worry.... NOW WHAT U DO IS .... Without deleting anything, install froyocomb 1.6... It shud work coz thats how mine did hope it helps if not please ask
..::XDA RocK::..
HI THERE EVERYONE!!! ive been a symbian user for years, but when i change to android got inlove with it. im currntly on WB voo8.1 2.2, have no problem with it flashing and rooting it. now im so exited for the GB update, i already download all files needed for WB tweak. after that of course i change to v8 to GB (tried it) installed thru xrecovery and followed steps in flashing 2.3
but when i rebooted after flashing my x10 stayed at the boot logo of sony ericssons. made me sad.......
can anyone pls help me with this tried posting at WB thread but since im a new user it said that i can post there. can sum1 pls help me here or any1 here from the same country.. im from the philippines. pls guys help me..
hve u flashed ftf file from flashtool...???
Ok here u are
Now go to xrecovery and do following steps
wipe user data full wipe
wipe cache partition
wipe cache
wipe dalvim cache
flash the rom
if now u get stuck on boot logo, just go to xrecovery wipe.cache and dalvik cache and the problem will gone.
Send from my own MIUI Final by Oskar.K X10 .
re. help pls..
yes i did that.
1. backup using xrecovery
2.did the following in xRecovery
-Factory Reset
-Wipe Cache Partition
-Format Cache
-Wipe Dalvik Cache
3.install WB gb zip
4.remove battery then put it back for a while
5.flashed ftf file using flashtool
6.reboot then stuckedddd.
do i need to download a newer flash tool? the one that i currently use is the that i use flashing baseband needed for WB v8.
ok ill give it a go again hehehe. im currently on 2.1.b do you guys think its an issue? and another one im using openvpn for my internet and subscribe locally at our local site here at my country. do you think that my tun.ko would work? badly need internet at my work and at home internet providers at our place sucks by the way because our place its not that develop when it comes to tlephone and internet.
knive13 said:
yes i did that.
1. backup using xrecovery
2.did the following in xRecovery
-Factory Reset
-Wipe Cache Partition
-Format Cache
-Wipe Dalvik Cache
3.install WB gb zip
4.remove battery then put it back for a while
5.flashed ftf file using flashtool
6.reboot then stuckedddd.
do i need to download a newer flash tool? the one that i currently use is the that i use flashing baseband needed for WB v8.
Click to expand...
Click to collapse
no dude u need latest BB .71 its in the WB ROM's thread.
yeAah i have it too followed the steps installed wiped needed things to be wiped then inatall custom WB zip,i didnt reboot then removed battery for a while then flashed ftf file on WB thread after flashing turn on phone then stucked at SE logo.
ill try to repeat the steps again hope fully i wont get the same result.. thanks to you guys. ill update u guys once i made it work. again lots of thanks to you guys its well aprreciated.. =)=)
Is ist possible to upgrade directly or must i downgrade first to the last stock kernel and firmware?
At the moment it works with mimi cm7 and the latest nAa kernel.
Its better to flash back to stock first and then upgrade to other rom...
Since for MiniCM9 you will need both a new kernel and a new rom, and you need to do a factory reset... basically all parts of your phone will be wiped clean, so I guess just upgrading from your current setup is no different than from stock.
At least, I had no problems with it, but then, all people and all devices are different
excellent 9
waive11 said:
Is ist possible to upgrade directly or must i downgrade first to the last stock kernel and firmware?
At the moment it works with mimi cm7 and the latest nAa kernel.
Click to expand...
Click to collapse
You can flash the new kernel directly. I did it that way and upgraded successfully.
I did a factory reset ,flashed the new kernel,than the ROM and google apps and it worked perfectly.
I update from mini cm7 to mini cm 9.I followed NAa´s instructions to install cm 9.And it works good.
No need to wipe
Well i didnt wipe and i upgraded... Totally OK. It just takes 15 mins to update and optimize apps.
Just (1) Flash new kernel via Flashtool(2) Enter CWM and flash MiniCM9 AND GApps, (3) IMPORTANT goto advanced>clear dalvik cache !!! (4) Reboot and let it optimize apps (5) It should work perfectly and preserve most of your old settings & apps.
In any case, if there are problems, just factory wipe
Remember to download minicm9 onto your phone before installing the kernel.
Enjoy MiniCM9 and ICS
Ok guys i need help badly...im new to all this and i stuck at the rom flashing...im trying to put on my x10 this rom [ICS] MIUI V4 FoR X10![Fast and Super-Fast] V2 with the fxp kernel. First thing with this kernel i get freezed on sonyericson logo...thats one problem...fro mtiem to tiem i manage to enter xrecovery and when i flash the rom i get some error like status 7. i rooted, unlocked and done everything i just miss those 2 stepps :/ pls help
draxx318is said:
Ok guys i need help badly...im new to all this and i stuck at the rom flashing...im trying to put on my x10 this rom [ICS] MIUI V4 FoR X10![Fast and Super-Fast] V2 with the fxp kernel. First thing with this kernel i get freezed on sonyericson logo...thats one problem...fro mtiem to tiem i manage to enter xrecovery and when i flash the rom i get some error like status 7. i rooted, unlocked and done everything i just miss those 2 stepps :/ pls help
Click to expand...
Click to collapse
Reflash your Kernel. Wipe Everything (System, Data, Dalvik, Cache). Then try again. Try another recovery and see if it work...cos CWM sometimes throws an error while parsing some scripts while Xrec simply ignores them. try Xrecovery. When in Root Screen Flash-Tool, Identify your device And install a restart into the default Xrec for that ROM.
kunmii said:
Reflash your Kernel. Wipe Everything (System, Data, Dalvik, Cache). Then try again. Try another recovery and see if it work...cos CWM sometimes throws an error while parsing some scripts while Xrec simply ignores them. try Xrecovery. When in Root Screen Flash-Tool, Identify your device And install a restart into the default Xrec for that ROM.
Click to expand...
Click to collapse
It worked! big thanks!!!
hi,
I was on CM 9 nightly http://www.cyanogenmod.org/devices/sony-ericsson-xperia-ray
and just tryed to upgrade for the newest version there !
(copy last version to sd, wipe cache - dalvik, flash, reboot)
And now, i'm stucked on freeXperia logo
cant even flash something else (assert failed: getprop("ro.product.device")...)
Have you flashed the latest kernel (should be included in the zip)?
If this doesn't work, wippe data/factory reset and flash it again.
If you get the getprop error, open MetaInf-com-google-android-updater-script and delete the first 3 lines (they start with getprop). Pack zip again and flash it :good:
Sent from my SK17i running Jelly Bean via CM10
well, i dont know for the kernel : i did (like for my GS2) install zip for sd card, then choose the the CM9 version. Isn't the kernel flashed same time?
i tryed wipe data/factory reset, the flash doesnt work
the MetaInf-com-google.... solution works : i can flash it again without the error.
Thanks bro!
Kernel must be flashed via flashtool or fastboot. How to do that (flashing the boot.img) is in the tutorial for installing custom roms/kernels in my signature :good:
Sent from my SK17i running Jelly Bean via CM10
stanlefor said:
well, i dont know for the kernel : i did (like for my GS2) install zip for sd card, then choose the the CM9 version. Isn't the kernel flashed same time?
i tryed wipe data/factory reset, the flash doesnt work
the MetaInf-com-google.... solution works : i can flash it again without the error.
Thanks bro!
Click to expand...
Click to collapse
No, xperia phone aren like sammy phone which got separate recovery and kernel partition. In fact, by default stock, xperia phone doesnt even have any recovery. The kernel must be flashed via fastboot before flashing rom. Recovery integrated into kernel ramdisk.