Hi there.
I have problem with all ROMs. I used CyaNoComb v1.1. In CWM i tap fix permissions. When it get finished I reboot the phone, type the PIN and than... I openned some app and than error, I tried other app and than error too. I wiped data, patrition chache, dalvik cache, battery stats. Than I tried to install ROM(FroyoComb v1.6) and the phone several times stuck at bootanimation. Animation freezes and I can do nothing. I rebooted the phone, tried to go to Android but I can't. I several times tried to install ROM(few roms) but it do the same. Than i restored SE stock 2.1 from my backup and it works normally... Than i tried to do clean install of any rom but nothing changed. I restord from my backup and i want to update from SEUS but when I hold back and connected phone to PC it says:Failed to detect product. The product could not be identified. Please disconnect and try it again.
I tried several times but nothing changed. Please help, what should i do?
Can anyone upload his backup from clean install FroyoComb or other rom? THANKS
Are you aware that installing froyocomb 1.6 and slades - umm help me - 'slades' 6.0 as clean install (wipe user data) does not work as expected?
People who waited report, they waited about 1-2 hours until it finished.
This is a known bug and will be fixed soon.
So try prvious versions or better the CyaNo editions - this should work.
Maybe fixing permissions is no good idea in this roms. Use your backups to have a running systems - if you haven't any backup: why the hell not?
sent with my mini pro
I have backup only from Stock ROM... Going to try older versions...
edit: What a HELL?! Slade's better than Sonny Ericsson. CyaNo v1.3 booted perfectly. But I still prefer CyanoComb or FroyoComb
There is currently a problem with Froyocomb 1.6 and slades rom V6.... You cant just clean or fresh install them.... You should read the comments my friend lol but here is how u wud install froyocomb 1.6
From ure stock install root and xrecovery then wipe dalvik cache and factory reset wipe everything necessary then install froyocomb 1.5 .... Boot it once play around for a minute or two log in ure google account and then go back into xrecovery, wat u will notice is that it becomes orange and this is clockwork mod recovery better than xrec its still the same dnt worry.... NOW WHAT U DO IS .... Without deleting anything, install froyocomb 1.6... It shud work coz thats how mine did hope it helps if not please ask
..::XDA RocK::..
Related
Hello,
i want wo update my X10 but i have some problems.
I have succesfully rooted my phone and installed xRecovery too.
Then i install "X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897 - Global Generic" to my X10 without any problems.
I boot my x10 some times but i have no network access (2/3/4G) and i cant use WLAN...
Then i look at the system info and see "baseband version: unknown"...
What is the problem with my update???
I still tried to flash the update again but nothing has changed.
Sorry for my bad english guys... ^^
mfg
Flo
Plenty of solutions to your problem on the forum if you use search but...
Your problem is you installed the new software over your old without wiping data (Factory Rest) in the Xrecovery options before you flashed it.
If you backed up your original first...
Go to Xrecovery (Restart phone and press back button a few times while "Sony Erricson" is showing)
Move to wipe User data (Factory Reset)
THEN reinstall your back up.
THEN you can go back to Xrecovery menu
Wipe User Data (Factory Reset)
Then Install the new global generic software.
This should fix your data and signal errors and also give you a working baseband number.
Thanks for your help but it doesn´t works...
I have the same problems than before...
Baseband version ist still unknown...
Any other solution for my problem???
If the rest of your phone is still functional after re-installing the latest firmware with xrecovery then you might want to try installing one of the custom ROMs for this .435, like the high performance ROM kx10 R2B001. This ROM is definately better than the stock firmware just look it up in the development forum.
Hey im sorry about my above post... when i said with xrecovery i ment make sure you have xrecovery working; not installing the firmware with xrecovery as all firmware uses the flash tool.
First of all hello to everyone and sorry for my bad english.
I have been in the forums for a few weeks now and I must tell I love it.
Okay now on to the topic.
I have seen manny people with issue's like rebooting for the Cyanogenmod.
Now here's what I did to let it work for me after I fu**ed-up the first time.
1: Using Pc Companion I restored my S.E. firmware version.
2: I did a factory reset ( options, privacy, factory reset.)
3: I formatted my SD card
4: I downloaded the Cyanogenmod from Wolfbreak and installed it to my phone and guess no more Reboots.
I hope that this solves the problem of manny people with reboot errors.
And again sorry for my bad english.
You dont need to restore anything with pc companion, just wipe entire phone whit xRecovery before flash CM 6.1.3 v4 just as Wolfbreak says in CM ROM thread
1. Go to Xrecovery and make a Backup of your current ROM (optional but i suggest it)
2. make following in Xrecovery
- do a Factory Reset
- Wipe Cache Partition,
- Wipe Dalvik Cache
- Wipe Battery Stats
3. Install Custom Zip and choose CM6.1.3-V4.zip
Click to expand...
Click to collapse
Alejandrissimo said:
You dont need to restore anything with pc companion, just wipe entire phone whit xRecovery before flash CM 6.1.3 v4 just as Wolfbreak says in CM ROM thread
Click to expand...
Click to collapse
This is for people who fu****-up like me the first time (like installing from the wrong kernel version) they tryed to install Cyanogenmod. Because I tryed everything but nothing seemed to work for me except this method.
enescecen said:
This is for people who fu****-up like me the first time (like installing from the wrong kernel version) they tryed to install Cyanogenmod. Because I tryed everything but nothing seemed to work for me except this method.
Click to expand...
Click to collapse
Unfortunately, about 99% of the times when things go wrong, come not by reading the information, either by too much work, thrilling moment, etc..
1. Hardly something gone wrong if you follow the instructions;
2. Hardly we nned to make an installation from the PCC or SEUS.
With Rom`s currently available, the entire installation is done through the xRecovery. 99% of the times that you end up having multiple loops had to do with bad version of the baseband.
Alejandrissimo said:
You dont need to restore anything with pc companion, just wipe entire phone whit xRecovery before flash CM 6.1.3 v4 just as Wolfbreak says in CM ROM thread
Click to expand...
Click to collapse
this is what i have been doing all along, still i get reboots.
ALSO try running fix permissions in either ROM manager or in xrecovery under advanced options, that is why this feature is in both apps....To help fix fc and reboot problems when switching ROMS!!! ( Not just CM rom's any rom!!! )
Will help, but won't fix all problems!!
Best regards,
Chris
zabihjan said:
this is what i have been doing all along, still i get reboots.
Click to expand...
Click to collapse
Try Step 3 of enescecen instructions...seems like that is a differentiating step.
zabihjan said:
this is what i have been doing all along, still i get reboots.
Click to expand...
Click to collapse
flash this
2.1.A.435_GLOBAL-GGL_GENERIC_1232-9897.ftf
and this
X10i_58_baseband.ftf
with Flash tool, then get root and install xrecovery
now, in xrecovery, full wipe (chache, battery, etc), install cyanogen rom from wolfbreak and vuala!!! all you need is that
Can you guys do a simple test with a custom 2.2 / 2.3 ROM? Start root explorer, and kill it via a task manager.
Does your device reboot after a while?
Hello Everyone,
I have a problem and i cant find it out, so i hope u can help me!
When i flash TW007 every time when it is booted it restart itself over and over again. After 15-20 sec it restart, i can input my pin and some times get signal
I did the following install
- install via SEUS (firmware 2.1.B.0.1 with BB 67)
- root and XrecoveryV0.3 via flashtool 2.9.1
- install rom via xrecovery (Factory Reset/Wipe Cache Partition/Format Cache/Wipe Dalvik Cache)
- install custom zip TW V008
I tried different basebands .54 .58 .67
I have this problem with the rom of wolfbreak (V007 and V008) and Achotjan_v05
When i flash Wolfbreak V006 or XShinyBread it works, and no restarts!!
Before i was on Wolfbreak V006 BB.58
All stock Kernel!
X10i
What am i doing wrong??????
Pls Help, i want to have V008 stock Kernel!!!
thx
sam20100 said:
Hello Everyone,
I have a problem and i cant find it out, so i hope u can help me!
When i flash TW007 every time when it is booted it restart itself over and over again. After 15-20 sec it restart, i can input my pin and some times get signal
I did the following install
- install via SEUS (firmware 2.1.B with BB 67)
- root and xrecovery via flashtool
- install rom via xrecovery (Factory Reset/Wipe Cache Partition/Format Cache/Wipe Dalvik Cache)
- install custom zip TW V008
I tried different basebands .54 .58 .67
I have this problem with the rom of wolfbreak (V007 and V008) and Achotjan_v05
When i flash Wolfbreak V006 or XShinyBread it works, and no restarts!!
Before i was on Wolfbreak V006 BB.58
All stock Kernel!
X10i
What am i doing wrong??????
Pls Help, i want to have V008 stock Kernel!!!
thx
Click to expand...
Click to collapse
Have you tried other 2.2 ROMs such as ____MIUI and 2.3 ROMS?
I tried this rom once and it works: MIUI_xperia_TripNRaVeR-v1.0.9.zip
Never tried 2.3 roms because no camera driver (i thought)
And i liked wolfbreaks rom!
Anything i could try?
Sent from my SEX10 using XDA App
I have tried some other rom and they keep rebooting or no signal before too, even though I am in the right BB. I guess for some rom it's just not meant to be used for the country you are at (because of service provided, etc)?
Hmm strange, Because Wolfbreak v006 works good.
I live in the Netherlands, can someone confirm working TW V008 rom or Achotjan rom in the Netherlands??
sam20100 said:
Hello Everyone,
I have a problem and i cant find it out, so i hope u can help me!
When i flash TW007 every time when it is booted it restart itself over and over again. After 15-20 sec it restart, i can input my pin and some times get signal
I did the following install
- install via SEUS (firmware 2.1.B with BB 67)
- root and xrecovery via flashtool
- install rom via xrecovery (Factory Reset/Wipe Cache Partition/Format Cache/Wipe Dalvik Cache)
- install custom zip TW V008
I tried different basebands .54 .58 .67
I have this problem with the rom of wolfbreak (V007 and V008) and Achotjan_v05
When i flash Wolfbreak V006 or XShinyBread it works, and no restarts!!
Before i was on Wolfbreak V006 BB.58
All stock Kernel!
X10i
What am i doing wrong??????
Pls Help, i want to have V008 stock Kernel!!!
thx
Click to expand...
Click to collapse
Wolf break will restart a few times when you first install it.
It does this to get signal and stabilize the BB.
Make sure your SIM is inserted.
Mine does this 8 to 12 times then it will become stable.
Yesterday, i left my phone alone for 20 min. So i think 15-20 reboots. But it not become stable...
Sent from my SEX10 using XDA App
You have to make sure you flash in the correct pattern with the correct rom.
Also if "Factory Reset/Wipe Cache Partition" then you don't need to format the cache again and wipe the dalvik partition.
I did this, is this the right way?
- install via SEUS (firmware 2.1.B with BB 67)
- root and xrecoveryV0.3 via flashtool 2.9.1
- install rom via xrecovery (Factory Reset/Wipe Cache Partition/Format Cache/Wipe Dalvik Cache)
- install custom zip TW V008
Then it keeps rebooting.
Now trying above.
(but no scard with in the phone while installing via SEUS)
and shall try more reboots 30 mins)
is it a idea to format SD-card?
I had the same problem.
Flashed custom kernell addon and the restarts stoped.
Thx All..
It works now,
For me the tric was to DISABLE SIM PIN!
Some how, when you disable the pin, the phone have more time to get signal and become stable before is restarts itself
(i also did get after entering the pin, Simnetwork lock popup)
I did fresh install Seus/Flashtool/Xrec. and boots 2 times to become stable!
I was trying since TW V008 came out so i'm happy now!
Ok guys n gals
I have an Xperia X10 which is locked to the Three network. I have rooted it and also installed xrecovery using the latest flashtool.
I have installed the link here http://forum.xda-developers.com/showthread.php?t=1353584 to enable me to run MIUI ROMS.
Basically it is for locked boot loaders and installs:
CWM5 and LockedBL.zip.
I have downloaded Xperia_MIUI_Engineering V02 via CWM5 doing a factory reset and clearing all user data and Dalvik cache beforehand..
Now.. ROM work fine great on everything except..... ha ha making a phone call!!
I have signal everything etc but when I go into an existing contact I get an Android crash..
"The process android.process.acore has stopped unexpectedly. Please try again"
The options are then Force Close or Report to MIUI which I have done both.
Any ideas anyone?
pcsel said:
Ok guys n gals
I have an Xperia X10 which is locked to the Three network. I have rooted it and also installed xrecovery using the latest flashtool.
I have installed the link here http://forum.xda-developers.com/showthread.php?t=1353584 to enable me to run MIUI ROMS.
Basically it is for locked boot loaders and installs:
CWM5 and LockedBL.zip.
I have downloaded Xperia_MIUI_Engineering V02 via CWM5 doing a factory reset and clearing all user data and Dalvik cache beforehand..
Now.. ROM work fine great on everything except..... ha ha making a phone call!!
I have signal everything etc but when I go into an existing contact I get an Android crash..
"The process android.process.acore has stopped unexpectedly. Please try again"
The options are then Force Close or Report to MIUI which I have done both.
Any ideas anyone?
Click to expand...
Click to collapse
Try Oodies MUIU Prime X its very stable
pcsel said:
Ok guys n gals
I have an Xperia X10 which is locked to the Three network. I have rooted it and also installed xrecovery using the latest flashtool.
I have installed the link here http://forum.xda-developers.com/showthread.php?t=1353584 to enable me to run MIUI ROMS.
Basically it is for locked boot loaders and installs:
CWM5 and LockedBL.zip.
I have downloaded Xperia_MIUI_Engineering V02 via CWM5 doing a factory reset and clearing all user data and Dalvik cache beforehand..
Now.. ROM work fine great on everything except..... ha ha making a phone call!!
I have signal everything etc but when I go into an existing contact I get an Android crash..
"The process android.process.acore has stopped unexpectedly. Please try again"
The options are then Force Close or Report to MIUI which I have done both.
Any ideas anyone?
Click to expand...
Click to collapse
well, is usual that you have some bugs using roms with the locked bootloader, try different rom or FIX PERMISSIONS via Root explorer.
Im using MIUI Oodie Prime and i have to say that is beautiful, try that one, it is more stable than Engineering
I tried the Oodie Prime..after a factory wipe, cache etc.. Now after installation I get the 'Sony Ericsson' startup, the (CWM5 Recovery) XDA Developers has disappeared so I can no longer boot back into CWM5 Recovery and I now have it stuck on the Oodie Startup screen and no further. I have to remove battery to reset and then rebuild with generic Android 2.3.3 etc.. and re root and xrecovery..
Try a different kernel, I had the same issue, you can use either oodies fxp kernel or doomlord v06 kernel. I've tried both and prefer the doomlord one.
Sent from my X10i using XDA App
Okay I fixed it for all of the ROMS that I was trying Doh.. I was installing the LockedBL.zip before the ROM..didn't read the instructions thoroughly..Works perfect now with a full wipe and ROM install and LockedBL.zip AFTER the ROM install
Will close the thread now.. Thanks for all your help.
Paul
Ok guys i need help badly...im new to all this and i stuck at the rom flashing...im trying to put on my x10 this rom [ICS] MIUI V4 FoR X10![Fast and Super-Fast] V2 with the fxp kernel. First thing with this kernel i get freezed on sonyericson logo...thats one problem...fro mtiem to tiem i manage to enter xrecovery and when i flash the rom i get some error like status 7. i rooted, unlocked and done everything i just miss those 2 stepps :/ pls help
draxx318is said:
Ok guys i need help badly...im new to all this and i stuck at the rom flashing...im trying to put on my x10 this rom [ICS] MIUI V4 FoR X10![Fast and Super-Fast] V2 with the fxp kernel. First thing with this kernel i get freezed on sonyericson logo...thats one problem...fro mtiem to tiem i manage to enter xrecovery and when i flash the rom i get some error like status 7. i rooted, unlocked and done everything i just miss those 2 stepps :/ pls help
Click to expand...
Click to collapse
Reflash your Kernel. Wipe Everything (System, Data, Dalvik, Cache). Then try again. Try another recovery and see if it work...cos CWM sometimes throws an error while parsing some scripts while Xrec simply ignores them. try Xrecovery. When in Root Screen Flash-Tool, Identify your device And install a restart into the default Xrec for that ROM.
kunmii said:
Reflash your Kernel. Wipe Everything (System, Data, Dalvik, Cache). Then try again. Try another recovery and see if it work...cos CWM sometimes throws an error while parsing some scripts while Xrec simply ignores them. try Xrecovery. When in Root Screen Flash-Tool, Identify your device And install a restart into the default Xrec for that ROM.
Click to expand...
Click to collapse
It worked! big thanks!!!