Hello,
i want wo update my X10 but i have some problems.
I have succesfully rooted my phone and installed xRecovery too.
Then i install "X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897 - Global Generic" to my X10 without any problems.
I boot my x10 some times but i have no network access (2/3/4G) and i cant use WLAN...
Then i look at the system info and see "baseband version: unknown"...
What is the problem with my update???
I still tried to flash the update again but nothing has changed.
Sorry for my bad english guys... ^^
mfg
Flo
Plenty of solutions to your problem on the forum if you use search but...
Your problem is you installed the new software over your old without wiping data (Factory Rest) in the Xrecovery options before you flashed it.
If you backed up your original first...
Go to Xrecovery (Restart phone and press back button a few times while "Sony Erricson" is showing)
Move to wipe User data (Factory Reset)
THEN reinstall your back up.
THEN you can go back to Xrecovery menu
Wipe User Data (Factory Reset)
Then Install the new global generic software.
This should fix your data and signal errors and also give you a working baseband number.
Thanks for your help but it doesn´t works...
I have the same problems than before...
Baseband version ist still unknown...
Any other solution for my problem???
If the rest of your phone is still functional after re-installing the latest firmware with xrecovery then you might want to try installing one of the custom ROMs for this .435, like the high performance ROM kx10 R2B001. This ROM is definately better than the stock firmware just look it up in the development forum.
Hey im sorry about my above post... when i said with xrecovery i ment make sure you have xrecovery working; not installing the firmware with xrecovery as all firmware uses the flash tool.
Related
First of all hello to everyone and sorry for my bad english.
I have been in the forums for a few weeks now and I must tell I love it.
Okay now on to the topic.
I have seen manny people with issue's like rebooting for the Cyanogenmod.
Now here's what I did to let it work for me after I fu**ed-up the first time.
1: Using Pc Companion I restored my S.E. firmware version.
2: I did a factory reset ( options, privacy, factory reset.)
3: I formatted my SD card
4: I downloaded the Cyanogenmod from Wolfbreak and installed it to my phone and guess no more Reboots.
I hope that this solves the problem of manny people with reboot errors.
And again sorry for my bad english.
You dont need to restore anything with pc companion, just wipe entire phone whit xRecovery before flash CM 6.1.3 v4 just as Wolfbreak says in CM ROM thread
1. Go to Xrecovery and make a Backup of your current ROM (optional but i suggest it)
2. make following in Xrecovery
- do a Factory Reset
- Wipe Cache Partition,
- Wipe Dalvik Cache
- Wipe Battery Stats
3. Install Custom Zip and choose CM6.1.3-V4.zip
Click to expand...
Click to collapse
Alejandrissimo said:
You dont need to restore anything with pc companion, just wipe entire phone whit xRecovery before flash CM 6.1.3 v4 just as Wolfbreak says in CM ROM thread
Click to expand...
Click to collapse
This is for people who fu****-up like me the first time (like installing from the wrong kernel version) they tryed to install Cyanogenmod. Because I tryed everything but nothing seemed to work for me except this method.
enescecen said:
This is for people who fu****-up like me the first time (like installing from the wrong kernel version) they tryed to install Cyanogenmod. Because I tryed everything but nothing seemed to work for me except this method.
Click to expand...
Click to collapse
Unfortunately, about 99% of the times when things go wrong, come not by reading the information, either by too much work, thrilling moment, etc..
1. Hardly something gone wrong if you follow the instructions;
2. Hardly we nned to make an installation from the PCC or SEUS.
With Rom`s currently available, the entire installation is done through the xRecovery. 99% of the times that you end up having multiple loops had to do with bad version of the baseband.
Alejandrissimo said:
You dont need to restore anything with pc companion, just wipe entire phone whit xRecovery before flash CM 6.1.3 v4 just as Wolfbreak says in CM ROM thread
Click to expand...
Click to collapse
this is what i have been doing all along, still i get reboots.
ALSO try running fix permissions in either ROM manager or in xrecovery under advanced options, that is why this feature is in both apps....To help fix fc and reboot problems when switching ROMS!!! ( Not just CM rom's any rom!!! )
Will help, but won't fix all problems!!
Best regards,
Chris
zabihjan said:
this is what i have been doing all along, still i get reboots.
Click to expand...
Click to collapse
Try Step 3 of enescecen instructions...seems like that is a differentiating step.
zabihjan said:
this is what i have been doing all along, still i get reboots.
Click to expand...
Click to collapse
flash this
2.1.A.435_GLOBAL-GGL_GENERIC_1232-9897.ftf
and this
X10i_58_baseband.ftf
with Flash tool, then get root and install xrecovery
now, in xrecovery, full wipe (chache, battery, etc), install cyanogen rom from wolfbreak and vuala!!! all you need is that
Can you guys do a simple test with a custom 2.2 / 2.3 ROM? Start root explorer, and kill it via a task manager.
Does your device reboot after a while?
Every time i try to reflash a new rom (freex10 beta 4, cynogen) my phone constantly restarts after about 10 secs. It doesnt stop. I have to restore my old rom to get it working normally again. Its been doing this for the past couple weeks or so. I have done everything in xrecovery ( Factory Reset, Wipe Cache Partition, Wipe Dalvik Cache, Wipe Battery Stats ) and i still cant reflash to a new rom. I have tried using pc companion to do a factory reset and it wont even let me. it says there is no currently no update available. Any ideas what i can do?
you didn't flash your baseband to .54 or .55 did you... This thread is posted at least five times a day. Read the first page before flashing a rom, it always tells you what to do.
Get the flashtool and flash one of those basebands (I would recommend .55)..
You can find the basebands here:
http://forum.xda-developers.com/showthread.php?t=960527
and the flashtool here:
http://forum.xda-developers.com/showthread.php?t=920746
Hey guys
I got a problem, today I tried the new tripnmiui... I did everything like I normally did with installing roms but now my phone is in a bootloop. And it seems I cant get out of it.
Cant flash or anything because my phone wont connect long enough. When my phone is recognized in a flashtool it reboots again and then looses connection in the flashtool.
Things I did:
Old rom > New rom
- Factory reset
- Wipe cache
- Wipe dalvik cache
- Then I installed the rom.
Could it be Im not on baseband 49? Coz im on 54... but I think it has nothing to do with the bootloop.
Thanks in advance guys
Nvm guys already got
Hey guys, i wanted to upgrade my x10 mini pro to froyo android, but i have one problem. It seems that all was installed properly, in settings there even stands android version 2.2.1, but the design of the whole phone is like in android 1.6, tried it with 2 versions of ROM, the same problem. Is it something i did? Sorry for my english
thanks for the answer...
try with reflashing your costum rom. but before that wipe dalvik cache, full wipe (factory reset) and install it
i guess stupid question but...what is reflashing? And how to do it?
in xrecovery select factory reset (full wipe)
and then install custom zip (rom that you want)
reflash means that you install rom again
Hi there.
I have problem with all ROMs. I used CyaNoComb v1.1. In CWM i tap fix permissions. When it get finished I reboot the phone, type the PIN and than... I openned some app and than error, I tried other app and than error too. I wiped data, patrition chache, dalvik cache, battery stats. Than I tried to install ROM(FroyoComb v1.6) and the phone several times stuck at bootanimation. Animation freezes and I can do nothing. I rebooted the phone, tried to go to Android but I can't. I several times tried to install ROM(few roms) but it do the same. Than i restored SE stock 2.1 from my backup and it works normally... Than i tried to do clean install of any rom but nothing changed. I restord from my backup and i want to update from SEUS but when I hold back and connected phone to PC it says:Failed to detect product. The product could not be identified. Please disconnect and try it again.
I tried several times but nothing changed. Please help, what should i do?
Can anyone upload his backup from clean install FroyoComb or other rom? THANKS
Are you aware that installing froyocomb 1.6 and slades - umm help me - 'slades' 6.0 as clean install (wipe user data) does not work as expected?
People who waited report, they waited about 1-2 hours until it finished.
This is a known bug and will be fixed soon.
So try prvious versions or better the CyaNo editions - this should work.
Maybe fixing permissions is no good idea in this roms. Use your backups to have a running systems - if you haven't any backup: why the hell not?
sent with my mini pro
I have backup only from Stock ROM... Going to try older versions...
edit: What a HELL?! Slade's better than Sonny Ericsson. CyaNo v1.3 booted perfectly. But I still prefer CyanoComb or FroyoComb
There is currently a problem with Froyocomb 1.6 and slades rom V6.... You cant just clean or fresh install them.... You should read the comments my friend lol but here is how u wud install froyocomb 1.6
From ure stock install root and xrecovery then wipe dalvik cache and factory reset wipe everything necessary then install froyocomb 1.5 .... Boot it once play around for a minute or two log in ure google account and then go back into xrecovery, wat u will notice is that it becomes orange and this is clockwork mod recovery better than xrec its still the same dnt worry.... NOW WHAT U DO IS .... Without deleting anything, install froyocomb 1.6... It shud work coz thats how mine did hope it helps if not please ask
..::XDA RocK::..