Ok guys n gals
I have an Xperia X10 which is locked to the Three network. I have rooted it and also installed xrecovery using the latest flashtool.
I have installed the link here http://forum.xda-developers.com/showthread.php?t=1353584 to enable me to run MIUI ROMS.
Basically it is for locked boot loaders and installs:
CWM5 and LockedBL.zip.
I have downloaded Xperia_MIUI_Engineering V02 via CWM5 doing a factory reset and clearing all user data and Dalvik cache beforehand..
Now.. ROM work fine great on everything except..... ha ha making a phone call!!
I have signal everything etc but when I go into an existing contact I get an Android crash..
"The process android.process.acore has stopped unexpectedly. Please try again"
The options are then Force Close or Report to MIUI which I have done both.
Any ideas anyone?
pcsel said:
Ok guys n gals
I have an Xperia X10 which is locked to the Three network. I have rooted it and also installed xrecovery using the latest flashtool.
I have installed the link here http://forum.xda-developers.com/showthread.php?t=1353584 to enable me to run MIUI ROMS.
Basically it is for locked boot loaders and installs:
CWM5 and LockedBL.zip.
I have downloaded Xperia_MIUI_Engineering V02 via CWM5 doing a factory reset and clearing all user data and Dalvik cache beforehand..
Now.. ROM work fine great on everything except..... ha ha making a phone call!!
I have signal everything etc but when I go into an existing contact I get an Android crash..
"The process android.process.acore has stopped unexpectedly. Please try again"
The options are then Force Close or Report to MIUI which I have done both.
Any ideas anyone?
Click to expand...
Click to collapse
Try Oodies MUIU Prime X its very stable
pcsel said:
Ok guys n gals
I have an Xperia X10 which is locked to the Three network. I have rooted it and also installed xrecovery using the latest flashtool.
I have installed the link here http://forum.xda-developers.com/showthread.php?t=1353584 to enable me to run MIUI ROMS.
Basically it is for locked boot loaders and installs:
CWM5 and LockedBL.zip.
I have downloaded Xperia_MIUI_Engineering V02 via CWM5 doing a factory reset and clearing all user data and Dalvik cache beforehand..
Now.. ROM work fine great on everything except..... ha ha making a phone call!!
I have signal everything etc but when I go into an existing contact I get an Android crash..
"The process android.process.acore has stopped unexpectedly. Please try again"
The options are then Force Close or Report to MIUI which I have done both.
Any ideas anyone?
Click to expand...
Click to collapse
well, is usual that you have some bugs using roms with the locked bootloader, try different rom or FIX PERMISSIONS via Root explorer.
Im using MIUI Oodie Prime and i have to say that is beautiful, try that one, it is more stable than Engineering
I tried the Oodie Prime..after a factory wipe, cache etc.. Now after installation I get the 'Sony Ericsson' startup, the (CWM5 Recovery) XDA Developers has disappeared so I can no longer boot back into CWM5 Recovery and I now have it stuck on the Oodie Startup screen and no further. I have to remove battery to reset and then rebuild with generic Android 2.3.3 etc.. and re root and xrecovery..
Try a different kernel, I had the same issue, you can use either oodies fxp kernel or doomlord v06 kernel. I've tried both and prefer the doomlord one.
Sent from my X10i using XDA App
Okay I fixed it for all of the ROMS that I was trying Doh.. I was installing the LockedBL.zip before the ROM..didn't read the instructions thoroughly..Works perfect now with a full wipe and ROM install and LockedBL.zip AFTER the ROM install
Will close the thread now.. Thanks for all your help.
Paul
Related
First of all hello to everyone and sorry for my bad english.
I have been in the forums for a few weeks now and I must tell I love it.
Okay now on to the topic.
I have seen manny people with issue's like rebooting for the Cyanogenmod.
Now here's what I did to let it work for me after I fu**ed-up the first time.
1: Using Pc Companion I restored my S.E. firmware version.
2: I did a factory reset ( options, privacy, factory reset.)
3: I formatted my SD card
4: I downloaded the Cyanogenmod from Wolfbreak and installed it to my phone and guess no more Reboots.
I hope that this solves the problem of manny people with reboot errors.
And again sorry for my bad english.
You dont need to restore anything with pc companion, just wipe entire phone whit xRecovery before flash CM 6.1.3 v4 just as Wolfbreak says in CM ROM thread
1. Go to Xrecovery and make a Backup of your current ROM (optional but i suggest it)
2. make following in Xrecovery
- do a Factory Reset
- Wipe Cache Partition,
- Wipe Dalvik Cache
- Wipe Battery Stats
3. Install Custom Zip and choose CM6.1.3-V4.zip
Click to expand...
Click to collapse
Alejandrissimo said:
You dont need to restore anything with pc companion, just wipe entire phone whit xRecovery before flash CM 6.1.3 v4 just as Wolfbreak says in CM ROM thread
Click to expand...
Click to collapse
This is for people who fu****-up like me the first time (like installing from the wrong kernel version) they tryed to install Cyanogenmod. Because I tryed everything but nothing seemed to work for me except this method.
enescecen said:
This is for people who fu****-up like me the first time (like installing from the wrong kernel version) they tryed to install Cyanogenmod. Because I tryed everything but nothing seemed to work for me except this method.
Click to expand...
Click to collapse
Unfortunately, about 99% of the times when things go wrong, come not by reading the information, either by too much work, thrilling moment, etc..
1. Hardly something gone wrong if you follow the instructions;
2. Hardly we nned to make an installation from the PCC or SEUS.
With Rom`s currently available, the entire installation is done through the xRecovery. 99% of the times that you end up having multiple loops had to do with bad version of the baseband.
Alejandrissimo said:
You dont need to restore anything with pc companion, just wipe entire phone whit xRecovery before flash CM 6.1.3 v4 just as Wolfbreak says in CM ROM thread
Click to expand...
Click to collapse
this is what i have been doing all along, still i get reboots.
ALSO try running fix permissions in either ROM manager or in xrecovery under advanced options, that is why this feature is in both apps....To help fix fc and reboot problems when switching ROMS!!! ( Not just CM rom's any rom!!! )
Will help, but won't fix all problems!!
Best regards,
Chris
zabihjan said:
this is what i have been doing all along, still i get reboots.
Click to expand...
Click to collapse
Try Step 3 of enescecen instructions...seems like that is a differentiating step.
zabihjan said:
this is what i have been doing all along, still i get reboots.
Click to expand...
Click to collapse
flash this
2.1.A.435_GLOBAL-GGL_GENERIC_1232-9897.ftf
and this
X10i_58_baseband.ftf
with Flash tool, then get root and install xrecovery
now, in xrecovery, full wipe (chache, battery, etc), install cyanogen rom from wolfbreak and vuala!!! all you need is that
Can you guys do a simple test with a custom 2.2 / 2.3 ROM? Start root explorer, and kill it via a task manager.
Does your device reboot after a while?
Hi there.
I have problem with all ROMs. I used CyaNoComb v1.1. In CWM i tap fix permissions. When it get finished I reboot the phone, type the PIN and than... I openned some app and than error, I tried other app and than error too. I wiped data, patrition chache, dalvik cache, battery stats. Than I tried to install ROM(FroyoComb v1.6) and the phone several times stuck at bootanimation. Animation freezes and I can do nothing. I rebooted the phone, tried to go to Android but I can't. I several times tried to install ROM(few roms) but it do the same. Than i restored SE stock 2.1 from my backup and it works normally... Than i tried to do clean install of any rom but nothing changed. I restord from my backup and i want to update from SEUS but when I hold back and connected phone to PC it says:Failed to detect product. The product could not be identified. Please disconnect and try it again.
I tried several times but nothing changed. Please help, what should i do?
Can anyone upload his backup from clean install FroyoComb or other rom? THANKS
Are you aware that installing froyocomb 1.6 and slades - umm help me - 'slades' 6.0 as clean install (wipe user data) does not work as expected?
People who waited report, they waited about 1-2 hours until it finished.
This is a known bug and will be fixed soon.
So try prvious versions or better the CyaNo editions - this should work.
Maybe fixing permissions is no good idea in this roms. Use your backups to have a running systems - if you haven't any backup: why the hell not?
sent with my mini pro
I have backup only from Stock ROM... Going to try older versions...
edit: What a HELL?! Slade's better than Sonny Ericsson. CyaNo v1.3 booted perfectly. But I still prefer CyanoComb or FroyoComb
There is currently a problem with Froyocomb 1.6 and slades rom V6.... You cant just clean or fresh install them.... You should read the comments my friend lol but here is how u wud install froyocomb 1.6
From ure stock install root and xrecovery then wipe dalvik cache and factory reset wipe everything necessary then install froyocomb 1.5 .... Boot it once play around for a minute or two log in ure google account and then go back into xrecovery, wat u will notice is that it becomes orange and this is clockwork mod recovery better than xrec its still the same dnt worry.... NOW WHAT U DO IS .... Without deleting anything, install froyocomb 1.6... It shud work coz thats how mine did hope it helps if not please ask
..::XDA RocK::..
Hello,
I'm a X10 user, but my brother has SGSII so I'm not familiar with the kernel & ROM stuff. His problem is, that whenever he tries to flash any of MIUI ROM's (Android 4.0) he gets after about 10min of using it an "com.android.process has stopped working" error.
He wiped everything: cache, data, dalvik and still nothing.
After that he has to reflash to the current official ICS ROM, which is working fine.
Please help me to solve the problem, if You know what's the reason.
first do a factory reset than install stock rom then root it then flash miui rom...
rocky23 said:
first do a factory reset than install stock rom then root it then flash miui rom...
Click to expand...
Click to collapse
But it is already on stock, rooted ROM
I have an unlocked bootloader, rooted my phone using Doomkernel V4.. but when ever i tried to install a custom rom, my phone goes to bootloop. no matter what i try. I even tried by clearing Delvik Cache, System, Boot, and data before installing rom. ( KA07 Xperia SSpeed throught Aroma 2.0) m i missing something?? Please help.. I am very new to android so things might be hard for me to understand. many Thanks in advance..
Demogorgon69 said:
I have an unlocked bootloader, rooted my phone using Doomkernel V4.. but when ever i tried to install a custom rom, my phone goes to bootloop. no matter what i try. I even tried by clearing Delvik Cache, System, Boot, and data before installing rom. ( KA07 Xperia SSpeed throught Aroma 2.0) m i missing something?? Please help.. I am very new to android so things might be hard for me to understand. many Thanks in advance..
Click to expand...
Click to collapse
Do a clean install of KA06 and then install KA07 without factory reset
It's posted more then once in the thread
Sent from my LT26i using XDA
thanks mate,, downloading now
Ok guys i need help badly...im new to all this and i stuck at the rom flashing...im trying to put on my x10 this rom [ICS] MIUI V4 FoR X10![Fast and Super-Fast] V2 with the fxp kernel. First thing with this kernel i get freezed on sonyericson logo...thats one problem...fro mtiem to tiem i manage to enter xrecovery and when i flash the rom i get some error like status 7. i rooted, unlocked and done everything i just miss those 2 stepps :/ pls help
draxx318is said:
Ok guys i need help badly...im new to all this and i stuck at the rom flashing...im trying to put on my x10 this rom [ICS] MIUI V4 FoR X10![Fast and Super-Fast] V2 with the fxp kernel. First thing with this kernel i get freezed on sonyericson logo...thats one problem...fro mtiem to tiem i manage to enter xrecovery and when i flash the rom i get some error like status 7. i rooted, unlocked and done everything i just miss those 2 stepps :/ pls help
Click to expand...
Click to collapse
Reflash your Kernel. Wipe Everything (System, Data, Dalvik, Cache). Then try again. Try another recovery and see if it work...cos CWM sometimes throws an error while parsing some scripts while Xrec simply ignores them. try Xrecovery. When in Root Screen Flash-Tool, Identify your device And install a restart into the default Xrec for that ROM.
kunmii said:
Reflash your Kernel. Wipe Everything (System, Data, Dalvik, Cache). Then try again. Try another recovery and see if it work...cos CWM sometimes throws an error while parsing some scripts while Xrec simply ignores them. try Xrecovery. When in Root Screen Flash-Tool, Identify your device And install a restart into the default Xrec for that ROM.
Click to expand...
Click to collapse
It worked! big thanks!!!