Related
first of all let me say that i've don a lot of searching before posting this, and i know it seems pretty long but please try to help me.
i got an x10i from a friend few days a go. the reason i got it (for free) was because it's not working and he didnt want to mess with it anymore.
when i first got it, if i tried to turn it on, the led would flash red. once in a while it got turned on, the sony ericsson text appeared for a few seconds and went off again. now if i try to turn it on the led would flash green for a sec, there is a vibrate but thats it. screen wont turn on at all.
i'f i try to connect it in the SE PC suite it detects it, but fails installing it. i've managed to enter the repair tool, but it failed a few times. however, the last time i tried to repair it said that it was repaired succesfully. still, not turning on.
tried to flash a firmware via flashtool, seems like its going well all the way but in the end it says "error flashing. aborted".
i'm pretty much out of ideas now, so ill really be grateful if anyone could help me.
a little update:
i've manged to flash a firmware via flashtool and it finished without any error, but still it won't turn. only the quick green flash and vibration.
any help will be appreciated.
ok, big update:
the phone is starting, i get past the boot animation and see the main screen (!) but after a sec or 2 the screen freezes and the phone shut down and won't start again unless i replace the battery?
please? anyone? im feeling so close yet so far away. could be a battery issue? when the screen starts i see that the battery is almost empty (connecting it to the charger won't help)
Yesterday i had the same problem ... i had to flash the hole firmware with X10Flash-2.1 and then updating with seus.. after this it restarts and it boot correctly
Not sure if u tried this, try having the phone plugged into the charger and let it charge for a while and then try booting it up again. Firmware wise, I would try a stable 2.1 or the freex10 beta 2.2 for a start to ensure that the software installed are stable ones. Hope this help.
try to fix it with seus...
nothing else willing to work as it seems there is something wrong a little deeper than flashable files...
This is I believe 1000th thread about this.
1. run seus
2. run PCC
3. run flashtool
Done.
SEUS seems to be the most effective way of repairing this.. Although you might also want to try pulling the battery before it freezes, it can help to recalibrate the battery.
Sent from my X10 using XDA and Swype.
thanks to everyone who replied.
i've downloaded and installed on the phone the version by SEUS, but i still cant turn on the phone.
in PC companion nothing is happening. when i go to the support section to get the new version, it just connecting with the phone and then tells to disconnect the phone and turn it on (which of course don't happen).
i've tried to run a repair in PC suite but it fails.
i've also tried to flash a firmware in flashtool, but it also fails.
any ideas?
Davinciteam.com .they sell you the original 1.6
Sent from my X10i using XDA Premium App
simoking said:
Davinciteam.com .they sell you the original 1.6
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
and how the 1.6 will help me?
and another thing: i'm using the versions under x10i generic here:
http://forum.xda-developers.com/showthread.php?t=920746
with the first and the third ones i get an error, but with the second i don't. however the device still won't turn on.
is there any chance that because i'm using win 7 64 bit it causes problems?
please?...
Ace_co said:
is there any chance that because i'm using win 7 64 bit it causes problems?
Click to expand...
Click to collapse
If i am not wrong windows 32/64 bit does not affect how ur phone is gonna be installed since the installer that is downloaded is for the phone only and the installation process will only be done by the phone itself.
Not sure if u tried a different software such as xrecovery to install the OS into ur x10, since xrecovery with freex10beta4 works for almost all of the users in here, it should work for u if ur x10 has no hardware faults. If all still fails, it might be most probably your x10 hardware has failed or something along those lines.
It work for me, then with the 1.6 you can after that update with seus to 2.1update 1. If your phone doesn't work anymore you have nothing to lose.
Sent from my X10i using XDA Premium App
the original 1.6 is on this forum also... please make some commercials somewhere else... k thanks...
4 out of the 9 posts u made had something to do with this website... could you stop please?
@the win7 part... you could get problems if you dont got the right drivers but it would tell you or error out...
the only thing what you could do in my opinion that is is short the pins while battery has been removed
this should effect total emptied phone and hopefully also the memory.... maybe than you are capable to flash/start it...
now if this wont work.. im sorry but im out of ideas and u shud use it to make a new barn or house ;/ im sorry
Didn't know the 1.6 was on the forum, thanks for the cue. I won't talk about that anymore.
Sent from my X10i using XDA Premium App
@ACE_co : I got the same problem. Can't use any SEUS, SE PC because it always fails when repairing. I even tried XIOFUB.rar to unbrick it to back to 1.6. It runs well and finish but with the info message within those commands
INFO: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="PROTOCOL_CLASS" ;ERR_STATIC="UNVALID_COMMAND";ERR_DYNAMIC="";
my xperia has the same problem, when I try to turn it on, a green light flashs, vibrate but it does not turn on I tried SEUS and PCC to repair but did not work, when I try flasher programs I see the
INFO: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="PROTOCOL_CLAS S" ;ERR_STATIC="UNVALID_COMMAND";
İf you found a solution maybe you can help me
Hey guys,
I have an x10i that just went dead one day, I thought it needed a software re-install so I did it. Now it wont turn on and I just get a quick green blink and a vibrate when I turn it on. Ive flashed it 10 times via sony update too and pc companion and flash tools. I dont know what to do, any help would me much appreciated.
Download SEUS from Sony and flash. Make sure it is fully charged and make sure you are using the right USB cable and try using several different USB ports on your computer if the first one doesn't work.
beau420 said:
Download SEUS from Sony and flash. Make sure it is fully charged and make sure you are using the right USB cable and try using several different USB ports on your computer if the first one doesn't work.
Click to expand...
Click to collapse
Thanks for the response, I have a fully charged battery and just re-flashed with still no luck. What did you mean about the "right usb cord" ?
Thanks again.
I mean reflashed with SEUS (not PC Companion) and by right USB cord, I mean the one that came with the phone. Or if you have the possibility, try another one.
Tried with 2 different usb cords and on 2 different cpus. I think Im S.O.L
One more question, after a flash how long does it take for the xperia to boot up?
During a flash with SEUS it tells you when the phone is rebooting....same with the Flashtool.
Screen turns on...still black...then Sony logo, then your bootlogo followed by desktop.
http://www.youtube.com/watch?v=HmX-IYNYqL8
Is it successfully flashing using SEUS or flashtool? Does it actually flash and then not boot? What does it say when you flahs using the flashtool?
But again, if the flashtool isn't working, you are going to have to use SEUS to get back to scratch. Run it as Admin...let it boot up and do nothing to the phone for at least 2 minutes. Do not swipe or move a thing....let it settle down.
Some of you people who ask for help really don't provide much information at all.
To me it looks like a wrong firmware problem... version you have installed isn't the same as kernel.
I would flashtool....root....turn off phone....SEUS full reflash....
beau420 said:
During a flash with SEUS it tells you when the phone is rebooting....same with the Flashtool.
Screen turns on...still black...then Sony logo, then your bootlogo followed by desktop.
http://www.youtube.com/watch?v=HmX-IYNYqL8
Is it successfully flashing using SEUS or flashtool? Does it actually flash and then not boot? What does it say when you flahs using the flashtool?
But again, if the flashtool isn't working, you are going to have to use SEUS to get back to scratch. Run it as Admin...let it boot up and do nothing to the phone for at least 2 minutes. Do not swipe or move a thing....let it settle down.
Some of you people who ask for help really don't provide much information at all.
To me it looks like a wrong firmware problem... version you have installed isn't the same as kernel.
I would flashtool....root....turn off phone....SEUS full reflash....
Click to expand...
Click to collapse
When the flash finishes up it says to turn on the device and the start up may take some time, Ive let it sit for hours and still nothing. IDK what the hell is wrong with it.
K well I give up. Ive tried 3 more times using a cpu with xp and still the same thing.
If any one else has had this problem please let me know.
looks like the faulty motherboard issue to me, some users are experiencing this problem, if you have warranty get a new phone if don't then i don't know what else can you do :/
Great. I have no warenty so looks like I'm screwed.
Sent from my HD2 using XDA App
Is there any way to fix the mother board issue ?
Dont mean to beat a dead horse but....... HELP!!!!
my x10i v2.3.3 batt was running low at 8%... so i turn it off from my work place... when i reach home and turn my phone on, my phone only vibrate abit and nothing was happen... so i tot my phone battery is flat so i when to charge it... but when i charge the phone nothing happens too.. i try take out the batt and put it back afew times but still not working... so i tot is my software facing problem and i use PCC and SEUS to repair... but it say can't install update try again.. i do it around 3 to 4 times... but still the same.. now my phone when i press on it blink green led once and nothing happen... but when i plug in my charger, the led turn green but in black screen... so can any1 help me fix tis.. thanks...
Hey, 'm facing the same issue
Recently i upgraded my Xperia to "ThGo2 v16.0" from custom rom..
After some time the rom got unstable and restarted the phone, however it wouldn't boot up. Now i have completely black screen, all the time, with few red blinks
(I have tried all the solutions here:
1. SEUS : Says ur phone is already update and show Xperia arc in backgroud. No update available
2. PC companion: Tried all the tricks to start w/o connecting n all still the phone is not detected.
3. Flashtool, tried flashing it with 0.6.8 and 0.2.9.1
4. I have also used other tools like superclick, root / unroot and S1 tool (no of them worked)
Now, nothing is working with few red blinks and gree light..
Please help, my phone is converted into a black paper weight now....
Use pc companion. Or flashtool
Sent from my X10 using xda premium
Nopes
I have tried all the method, right from SEUS, PC Companion and flash tool nothing is working.....
Is this an Hard brick, case, one of the technician suggested me an full flash through box, for which he will charge me INR 1500 (USD 30)...what do you think ?
surajpardeshi said:
I have tried all the method, right from SEUS, PC Companion and flash tool nothing is working.....
Is this an Hard brick, case, one of the technician suggested me an full flash through box, for which he will charge me INR 1500 (USD 30)...what do you think ?
Click to expand...
Click to collapse
U from India? Know hindi?
Sent from my X10 using xda premium
Me too BRICKED or Semi Bricked.... =(
First fail PCC
Then PCC Repair fail too
SEUS fail.
Took to different computer that was finally able to flash 2.1.1 update last year.
Clean install of pcc and seus Both still fail
In fact pic with yellow is from that fail & all others (Using Flashtool) except X10a_2.2.1.A.0.6_Rogers.ftf I get regular triangle with ! over top of phone pic after SE I've exhausted ALL my efforts and need guidance. I am super broke right now, so repair shop not good option. Two shops here in town say they will try, but NO PROMISES and still must pay for time
NEED True rescue fix here
Hindi yes
Yeah, I'm from Nashik, India, but I visit Mumbai frequently..
You, know any place where I can get this done in a cheaper way.....
surajpardeshi said:
Yeah, I'm from Nashik, India, but I visit Mumbai frequently..
You, know any place where I can get this done in a cheaper way.....
Click to expand...
Click to collapse
Right now i am bit busy. I will upload a pic for u as soon as i get free.
Sent from my X10 using xda premium
Using pcc... Even on "no phone connected"
Help us!!!
Can any1 out there help us fix tis problem or tell us what happen to our phone... or izzit our X10i is hopeless????
Pls help us....T_T
enzo1984316 said:
Can any1 out there help us fix tis problem or tell us what happen to our phone... or izzit our X10i is hopeless????
Pls help us....T_T
Click to expand...
Click to collapse
Did you try to read the above post at all?
Sent from my X10 using xda premium
i try PCC, SEUS and FLASHER.... All cannot work... i dunno what to do now...
btw... when my phone won't turn on that time my batt is low(Cos cannot charge) and debugging mode is off... izzit this problem make me can't do repair and reflash???
enzo1984316 said:
i try PCC, SEUS and FLASHER.... All cannot work... i dunno what to do now...
btw... when my phone won't turn on that time my batt is low(Cos cannot charge) and debugging mode is off... izzit this problem make me can't do repair and reflash???
Click to expand...
Click to collapse
Charge your battery using another x10 or any external charger
Sent from my X10 using xda premium
FIX!
I had the same issue when I was experimenting with ROMs and Recoverys, but not to worry, Sony PC Companion 2.1 does the trick!
Download PC Companion 2.1 from the Sony Mobile website
1. When you download and open it, click start under Support Zone
2. Click start under Phone Software Update
3. When the window saying that a phone could not be found appears, click repair phone
4. A windows like this will appear, click continue to proceed with the repair of the firmware
NOTE: All data that is placed on the phone memory will be wiped but any data saved on the memory card will be spared
5. After clicking continue, a window like so will appear. Tick the box and click next to continue with repair!
6. Sony PC Companion 2.1 will now prepare the computer for the firmware update
7. Now choose your phone model, in this case it should be the Xperia X10 (X10). Select the phone and click Next!
8. Follow the prompts to repair your phone!
GOOD LUCK!!
Always fails for me.
All process end in fail
There must be a file I need to rename or something....
tried everything now...
I have tried everything by now, here i have attached a attachment of error i get while repairing my phone through SEUS..
only option is box flash, but i think its kind of risky...
Fail fail fail..... i'm getting hopeless wif my X10
Hey,
I did some re-search and got to know that somehow my X10 flashes as So-01C in some systems, i.e. xperia arc, even while updating ..........
Anyone here, knows other ways to flash through box other than technician, coz these technicians are real idiot they can crap your phone in 10 seconds, so its better to crap it yourself...
"alternative to box flash, please ???"
Try this
Had the same problem once, when my phone would not start at all, all I had to do was connect it to the PC Companion (2.0), at first it wouldn't repair but after a certain amount of tries it did the trick,
First: Make sure all your drivers are installed, if they were installed there should be no problem.
If they were not, the computer cannot identify your phone, try installing some other x10's drivers (cause your's is bricked I assume) that might do the trick aswell.
Open PC Companion > Support Zone > Phone Software Update (Start) > Follow Instructions > Repair
It might take several tries to get it right
If this doesn't work try the latest flashtool, it should do the trick !!
There must be something you are not doing right, else SEUS/Flashtool should have worked like a charm.
see i get this reply, when updating x10..
I have tried this like thousands of times, installing roms and then removing them and repairing the phone, but this time it has gone over my head........
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
Its "soft-brick" state.
Didnt you have some problems with usb before?
If not, try to charge up your phone once again.
Then read this topic, It will surely help you:
http://forum.xda-developers.com/showthread.php?t=1034997
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Make the phone root 1st.
Try read here http://forum.xda-developers.com/showthread.php?t=928343
Then u can flash other ROM u like to your device.
Sorry, i am also newbie. but i read a lot thread and follow senior guide ^_^
dello2002 said:
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Click to expand...
Click to collapse
Even if phone shows up error triangle you should be able to use standart flash mode.
About fastboot dont know, never used it.
hi,
Thanks both for your help, in the end i downloaded the lastest version of flash tool and its got a option of disable verification and worked spot on.
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
dello2002 said:
hi,
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
Click to expand...
Click to collapse
No problem, it could be done, but not so simply. I did rooting and xrecovery installation without Flashtool many times since Flashtool werent possible torun on Linux
Root could be done with exploit zergRush; but try SuperOneClick first. It will take some time root it completely manual.
Same with xrecovery, but its much more simple, pasting three or four files to root FS.
Try superoneclick first, if it wont help, will provide more step by step information.
EDIT:
Simpliest solution - almost forgotten
Download the zip provided underthis post.
Extract the zip file.
Connect your phone to computer (remember, that USB debugging must be on!!!)
Run file runme.bat (command line window will appear).
Enjoy !
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
RELAX first.
You will have to flash the stock SE firmware is by using the X10 Flashtool i .e. get your phone to stock and then root it again.
Here's a video link to the procedure :
http://www.youtube.com/watch?v=HmX-IYNYqL8
And a link to the stock SE firmwares:
http://forum.xda-developers.com/showthread.php?t=920746
I used this firmware :
http://www.4shared.com/file/_Scw5x_R/x10i_301g075_1241-1846.html
Happy Flashing !
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
dello2002 said:
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
Click to expand...
Click to collapse
do you have USB debugging and unknown sources turned on your phone? Because its really strange why adb cant connect.
What ROM and kernel you are currently running on?
@dello what does ur pc say when u type adb devices?
Sent from my X10S using XDA
hi,
running the official rom and kernal that the SEUS installed running 2.3.3
and yes debugging mode and allow are both on but still says cannot connect to deamon, could it be the boot loader? i put ICS on a xperia play and did that fine, do i need to unlock the bootloader like i did with the play?
i did try to but the se website wont unlock it
and ADB in dos wont pick it up list empty
cheers
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help