Hey all,
So I'm currently having this issue where I restored from a soft brick and have had massive amounts of trouble doing much of anything other than stock. I've managed to flash UKB 2.0 this morning without it messing up but I can't install the 2.1 patch because CWM won't load.
Everytime I try to go into CWM now (Have tried all ways of doing it) it just says
"E: Can't mount /dev/block/stl11
(Invalid Argument)
E: Can't mount /dev/block/mmcblk0p1
(Invalid Argument)
#Manual Mode#
E: Can't mount /dev/block/stl11
(Invalid Argument)
E: Can't mount /dev/block/stl11
(Invalid Argument)"
What do?
MR H3LLMAN said:
Hey all,
So I'm currently having this issue where I restored from a soft brick and have had massive amounts of trouble doing much of anything other than stock. I've managed to flash UKB 2.0 this morning without it messing up but I can't install the 2.1 patch because CWM won't load.
Everytime I try to go into CWM now (Have tried all ways of doing it) it just says
"E: Can't mount /dev/block/stl11
(Invalid Argument)
E: Can't mount /dev/block/mmcblk0p1
(Invalid Argument)
#Manual Mode#
E: Can't mount /dev/block/stl11
(Invalid Argument)
E: Can't mount /dev/block/stl11
(Invalid Argument)"
What do?
Click to expand...
Click to collapse
Go to the development section nitsuj has a sticky titled list of cdma sch I-500 roms that's not the exact title but you'll find it...scroll down to ths list if recoveries click it and download jt's 3-30 all fix.tar file and save it in your odin folder.
Remove your battery and Flash the recovery via odin and just for good measure reinstall your battery and immediately hold up down and power until you see the cwr screen at that point wipe everything and reflash your rom and you'll be good
Note after you flash com rom 2.0 you will have a different recovery version but that one works fine too
Sent from my SCH-I500 using XDA App
Thank you very much! Ill be home in about an hour or 2. Ill post my results.
Sent from my SCH-I500 using XDA App
Thank you sir. I'm now sitting on the new CM7. Much appreciation.
Related
I recently flashed axura and was good...but wanted to try something else.
Tried this one rom...I renamed it with spaces.
CWM says it to rename it without spaces or do it manually...did it manually.
Phone will show the splash screen where it says Vibrant and will stay there forever.
When I hold down the volume buttons and power up......here's the message it says:
E: Can't mount /dev/block/stl11
(Invalid argument)
# MANUAL MODE #
-- Appling Muti-CSC...
Installing Muti-CSC
E: Can't mount /dev/block/stl11
(Invalid argument)
E: Can't mount /dev/block/stl11
(Invalid argument)
I tried deleting all user data and cache data...but gives me the same can't mount error message
I'm really worried that my phone is going to become trash.
Is there anything I can do.
Hard reset?.....I don't know
Help me out please
peetayoo said:
I recently flashed axura and was good...but wanted to try something else.
Tried this one rom...I renamed it with spaces.
CWM says it to rename it without spaces or do it manually...did it manually.
Phone will show the splash screen where it says Vibrant and will stay there forever.
When I hold down the volume buttons and power up......here's the message it says:
E: Can't mount /dev/block/stl11
(Invalid argument)
# MANUAL MODE #
-- Appling Muti-CSC...
Installing Muti-CSC
E: Can't mount /dev/block/stl11
(Invalid argument)
E: Can't mount /dev/block/stl11
(Invalid argument)
I tried deleting all user data and cache data...but gives me the same can't mount error message
I'm really worried that my phone is going to become trash.
Is there anything I can do.
Hard reset?.....I don't know
Help me out please
Click to expand...
Click to collapse
Sounds like a nice boot-loop. From my experience, I would say flash back to a true stock rom via Odin and start over from a clean slate.
Please refer to the bible sticky and Odin back to stock and try again . The vibrant is really hard to brick dont worry
Thanks guys
Odin did it..I was worried at first because odin froze a few times, but after persisting it finally went through.
You guys saved my life!
Hey all,
So the other day I went through my SD card and erased about 11GB of stuff I thought that I didnt need. Didnt run into any issues.... until this morning.
I attempted to flash a ROM this morning and halfway through I get this message:
-Formatting NAND with ext4 Alignment...
Installing system files...
E: Error in /tmp/sideload/package.zip
(Status 0)
And then goes back to the install zip menu.
When I try to do a NAND backup I get this error:
E: Failed to mount /cache (Invalid argument)
E: Cant mount /cache/recovery/command
E: Failed to mount /cache (Invalid argument)
E: Cant mount /cache/recovery/log
E: Cant open /cache/recovery/log
E: Failed to mount /cache (Invalid argument)
E: Cant mount /cache/recovery/last_log
E: Cant open /cache/recovery/last_log
E: Failed to mount /cache (Invalid argument)
Ive tried wiping my caches, as well as doing factory resets. When I reset my phone it just sits on the HTC splash screen.
So its obvious to me that I foolishly deleted a folder that I need in order to flash new ROMs properly as well as restore previous partitions.
I am S-Off of course
HBOOT-1.04.2000
Using Team Win Recovery
Anyone have any tips or workarounds for me that dont involve having to install Linux on my PC?
Try 4ext custom recovery.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Deleted
Yeah, I actually ended up just using my upgrade last night and got a Samsung Galaxy S III. Guess I should make those forums my new home lol. Thanks for attempting to help though Coal!
I can not speak English well, because I'm Korean.
----------
I'm used CyanogenMod 9.
and I'm want upgrade to CM10.
I'm Install CM10, My device is Status 7 Error.
I'm try install Kies Firmware.
but
'Complete(Write) operation failed.' Error.
and.. I'm install siyah kernel and I'm try install CM9.
but Status 9 Error.
pls help...
yom21c1020 said:
I can not speak English well, because I'm Korean.
----------
I'm used CyanogenMod 9.
and I'm want upgrade to CM10.
I'm Install CM10, My device is Status 7 Error.
I'm try install Kies Firmware.
but
'Complete(Write) operation failed.' Error.
and.. I'm install siyah kernel and I'm try install CM9.
but Status 9 Error.
pls help...
Click to expand...
Click to collapse
Did you make a back-up?
Flash dorimanx through ODIN. Take Kernel_Dorimanx-V9.43-[12-16]-[24-10]-TAR-FOR-ODIN.tar. With this kernel you'll be able to flash CM10 if thing are right.
Folow the necessary steps for flashing CM10.
Error!!
Christiaan91 said:
Did you make a back-up?
Flash dorimanx through ODIN. Take Kernel_Dorimanx-V9.43-[12-16]-[24-10]-TAR-FOR-ODIN.tar. With this kernel you'll be able to flash CM10 if thing are right.
Folow the necessary steps for flashing CM10.
Click to expand...
Click to collapse
Thank you.
but status 7 error.
i think /system broken.
because samsung recovery(not custom) is /system mount failed.
i want /system recovery.
pls help...
+i didn't make backup...
yom21c1020 said:
Thank you.
but status 7 error.
i think /system broken.
because samsung recovery(not custom) is /system mount failed.
i want /system recovery.
pls help...
+i didn't make backup...
Click to expand...
Click to collapse
can you tell me what is the error exactly?
sakouhi said:
can you tell me what is the error exactly?
Click to expand...
Click to collapse
OK. here's recovery mode error text.
Android system recovery<3e>
------
E:failed to mount /system (Invalid argument)
can't mount '/system' (Invalid argument)
E:failed to mount /system (Invalid argument)
# MANUAL MODE #
-- Appling Multi-CSC...
E:failed to mount /system (Invalid argument)
can't mount '/system' (Invalid argument)
E:failed to mount /system (Invalid argument)
pls help..
yom21c1020 said:
OK. here's recovery mode error text.
Android system recovery<3e>
------
E:failed to mount /system (Invalid argument)
can't mount '/system' (Invalid argument)
E:failed to mount /system (Invalid argument)
# MANUAL MODE #
-- Appling Multi-CSC...
E:failed to mount /system (Invalid argument)
can't mount '/system' (Invalid argument)
E:failed to mount /system (Invalid argument)
pls help..
Click to expand...
Click to collapse
are you try to flash it with odin?
I got to service center...
yom21c1020 said:
I can not speak English well, because I'm Korean.
----------
I'm used CyanogenMod 9.
and I'm want upgrade to CM10.
I'm Install CM10, My device is Status 7 Error.
I'm try install Kies Firmware.
but
'Complete(Write) operation failed.' Error.
and.. I'm install siyah kernel and I'm try install CM9.
but Status 9 Error.
pls help...
Click to expand...
Click to collapse
I got to customer service center.
thank you for much to xda and xda user...!
TESTED ON SAMSUNG
E:failed to mount /data (Invalid argument)
can't mount '/data' (Invalid argument)
E:failed to mount /data (Invalid argument)
Click to expand...
Click to collapse
OR
1>Screen becomes White with Black line's and Freezes To Restart and the gets in a bootloop with no SAMSUNG Boot animation
2>Samsung bootanimation gets in a loop and you cant Recover From Your CWM or TWRP Backup
Solution is
You should flash the stock rom of your phone
best place to download stock rom is Sammobile
Than Enter Your device Model Number and download
Stock rom for GT 7392 is ---
http://www.sammobile.com/Firmwares
and Extract the zip You will get ... a tar.md5 file
Open odin 3.07
Put Your Phone In Download Mode Using VolumeDown+Home+Power Button Than Connect It using a usb
Than you will See A COM5 or COM3 under ID:COM
See that only F reset time and auto reboot is Selected than Click on Pda and Select .
The ............................................._HOME.tar.md5
file and
Than Simply Click On Start
if than also it says
E:failed to mount /data (Invalid argument)
can't mount '/data' (Invalid argument)
E:failed to mount /data (Invalid argument)
Click to expand...
Click to collapse
Try Flashing the stock Rom Again
this time it will do
and
<"Note">----- Press Power Button to select Factory Reset Not Home Button Otherwise it will give the same error
E:failed to mount /data (Invalid argument)
can't mount '/data' (Invalid argument)
E:failed to mount /data (Invalid argument)
Click to expand...
Click to collapse
Than you are done
This error can be due to flashing Of faulty Roms Or By Some Problem while Developing Your Own rom and flashing it due to which your Internal SD Card File System Gets Corrupted
This Solution Is applicable in most of the case's When CWM OR TWRP fail to Recover Your Phone From such a situation
And do Like My posts And Follow me if You are helped
Hi everyone,
I got an error stating E:failed to mount /efs (Invalid argument) on my T560-NU and this results in boot loop. I tried using KIES, installing Stock ROM but nothing works. Everything completed successfully but still have problem. I tried using ADB to mount but they mount point is not valid due to using instructions for S3 and others, but not Tab E. Thanks for any help.