Hey all,
So the other day I went through my SD card and erased about 11GB of stuff I thought that I didnt need. Didnt run into any issues.... until this morning.
I attempted to flash a ROM this morning and halfway through I get this message:
-Formatting NAND with ext4 Alignment...
Installing system files...
E: Error in /tmp/sideload/package.zip
(Status 0)
And then goes back to the install zip menu.
When I try to do a NAND backup I get this error:
E: Failed to mount /cache (Invalid argument)
E: Cant mount /cache/recovery/command
E: Failed to mount /cache (Invalid argument)
E: Cant mount /cache/recovery/log
E: Cant open /cache/recovery/log
E: Failed to mount /cache (Invalid argument)
E: Cant mount /cache/recovery/last_log
E: Cant open /cache/recovery/last_log
E: Failed to mount /cache (Invalid argument)
Ive tried wiping my caches, as well as doing factory resets. When I reset my phone it just sits on the HTC splash screen.
So its obvious to me that I foolishly deleted a folder that I need in order to flash new ROMs properly as well as restore previous partitions.
I am S-Off of course
HBOOT-1.04.2000
Using Team Win Recovery
Anyone have any tips or workarounds for me that dont involve having to install Linux on my PC?
Try 4ext custom recovery.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Deleted
Yeah, I actually ended up just using my upgrade last night and got a Samsung Galaxy S III. Guess I should make those forums my new home lol. Thanks for attempting to help though Coal!
Related
I recently flashed axura and was good...but wanted to try something else.
Tried this one rom...I renamed it with spaces.
CWM says it to rename it without spaces or do it manually...did it manually.
Phone will show the splash screen where it says Vibrant and will stay there forever.
When I hold down the volume buttons and power up......here's the message it says:
E: Can't mount /dev/block/stl11
(Invalid argument)
# MANUAL MODE #
-- Appling Muti-CSC...
Installing Muti-CSC
E: Can't mount /dev/block/stl11
(Invalid argument)
E: Can't mount /dev/block/stl11
(Invalid argument)
I tried deleting all user data and cache data...but gives me the same can't mount error message
I'm really worried that my phone is going to become trash.
Is there anything I can do.
Hard reset?.....I don't know
Help me out please
peetayoo said:
I recently flashed axura and was good...but wanted to try something else.
Tried this one rom...I renamed it with spaces.
CWM says it to rename it without spaces or do it manually...did it manually.
Phone will show the splash screen where it says Vibrant and will stay there forever.
When I hold down the volume buttons and power up......here's the message it says:
E: Can't mount /dev/block/stl11
(Invalid argument)
# MANUAL MODE #
-- Appling Muti-CSC...
Installing Muti-CSC
E: Can't mount /dev/block/stl11
(Invalid argument)
E: Can't mount /dev/block/stl11
(Invalid argument)
I tried deleting all user data and cache data...but gives me the same can't mount error message
I'm really worried that my phone is going to become trash.
Is there anything I can do.
Hard reset?.....I don't know
Help me out please
Click to expand...
Click to collapse
Sounds like a nice boot-loop. From my experience, I would say flash back to a true stock rom via Odin and start over from a clean slate.
Please refer to the bible sticky and Odin back to stock and try again . The vibrant is really hard to brick dont worry
Thanks guys
Odin did it..I was worried at first because odin froze a few times, but after persisting it finally went through.
You guys saved my life!
Hey all,
So I'm currently having this issue where I restored from a soft brick and have had massive amounts of trouble doing much of anything other than stock. I've managed to flash UKB 2.0 this morning without it messing up but I can't install the 2.1 patch because CWM won't load.
Everytime I try to go into CWM now (Have tried all ways of doing it) it just says
"E: Can't mount /dev/block/stl11
(Invalid Argument)
E: Can't mount /dev/block/mmcblk0p1
(Invalid Argument)
#Manual Mode#
E: Can't mount /dev/block/stl11
(Invalid Argument)
E: Can't mount /dev/block/stl11
(Invalid Argument)"
What do?
MR H3LLMAN said:
Hey all,
So I'm currently having this issue where I restored from a soft brick and have had massive amounts of trouble doing much of anything other than stock. I've managed to flash UKB 2.0 this morning without it messing up but I can't install the 2.1 patch because CWM won't load.
Everytime I try to go into CWM now (Have tried all ways of doing it) it just says
"E: Can't mount /dev/block/stl11
(Invalid Argument)
E: Can't mount /dev/block/mmcblk0p1
(Invalid Argument)
#Manual Mode#
E: Can't mount /dev/block/stl11
(Invalid Argument)
E: Can't mount /dev/block/stl11
(Invalid Argument)"
What do?
Click to expand...
Click to collapse
Go to the development section nitsuj has a sticky titled list of cdma sch I-500 roms that's not the exact title but you'll find it...scroll down to ths list if recoveries click it and download jt's 3-30 all fix.tar file and save it in your odin folder.
Remove your battery and Flash the recovery via odin and just for good measure reinstall your battery and immediately hold up down and power until you see the cwr screen at that point wipe everything and reflash your rom and you'll be good
Note after you flash com rom 2.0 you will have a different recovery version but that one works fine too
Sent from my SCH-I500 using XDA App
Thank you very much! Ill be home in about an hour or 2. Ill post my results.
Sent from my SCH-I500 using XDA App
Thank you sir. I'm now sitting on the new CM7. Much appreciation.
I tied flashing back my stock rom (GT-I9100_NEE_I9100XWKI4_I9100OXXKI2_I9100XXKI1) through odin, but when my phone restarts it goes straight to Android system recovery and a lot of errors come up with red writing saying...
E:failed to mount /efs (no such file of directory)
E:failed to mound /cache (no such file or directory)
E:can't mount /cache/recovery/last_log
E:can't open /cache/recovery/last_log
I tried to wipe data/factory reset and it says
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p10
Please help as i am a real noob at this
I understand i should have read through the forum properly but eagerness took over me
what firmware did you have before?
Reflash following the instructions for first step .
jje
Thanks guys just found out i was flashing the wrong stock rom should have been
GT-I9100_XEU_I9100XXKI4_I9100XEUKH2_I9100XXKI4.tar
UPDATE: After five days, I'm sending my phone to service centre. Tomorrow, they will tell me what's the status of the device. I'll keep you posted and again, thanks to all who replied this post.
Hello everyone,
Yesterday my GT-i9300 with CM 11 was bricked after giving an encryption error. Now it stays in Samsung Galaxy logo screen.
After rebooting in recovery mode (CWM 6.0.4.6) it reads:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't mount /cache/recovery/last_install
E: Can't open /cache/recovery/last_install​
I tried to wipe data/factory reset with no luck. Here's the message:
-- Wiping data. . .
Formatting /data
Error mounting /data!
Skipping format...
Formatting /cache...
E: format_volume: make_extf4fs faild on /dev/block/mmcblk0p8
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't mount /cache/recovery/last_install
E: Can't open /cache/recovery/last_install
Formatting /sd-ext
E: Unknown volume for path [/sd-ext]
Formatting /sdcard/.android-secure...
Error mounting /sdcard/.android_secure!
Skipping Format . . .
Data Wipe Complete.​
Thus, I get an error when mounting /efs /system /cache and /preload /data and as a consequence, I cannot format any of the partitions.
Finally, I thought connecting through Odin and getting back to stock rom firmware was the solution, but everytime I try this, I receive an NAND WRITE START FAIL error.
I'm guessing I'll have to use a .PIT file to repartiion but it is impossible since ODIN can't even start a WRITE on NAND. I tried use adb shell instead and repartition with heimdall with no luck.
Please help. Everyone knows what does it feel to see your phone like that. This situation is really stressing :'(
Thanks in advanced.
PS: My phone has no longer warranty coverage
Sounds like nand memory failure, if the rescue firmware from general forum doesn't work then you'll need a new motherboard.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Sounds like nand memory failure, if the rescue firmware from general forum doesn't work then you'll need a new motherboard.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Yes I also thought that. I believe there has something in relation to having the phone encrypted (Actually, CM11 encrypted the filesystem). Doing some reading, I came in to this link that might help -> https://gist.github.com/L-P/7285035#3-obtain-the-partition-number-for-userdata. The problem is that right now, adb shell cannot grant me root permissions (strangely, yesterday was working fine).
Thanks
[Q] Error in CWM "E: Can't mount /cache/recovery/" E: Can't mount /cache/recovery/"
Hello, im noob in the forums so Hello everyone.
i have a problem with CWM, i installed CWM from this post in my S3 shv.e210L.
I do everything normal with odin, with no problem but when i enter to CWM i have this problem:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Click to expand...
Click to collapse
Yes, i have the phone rooted, i need CWM because i want to change the kernel to arter97.
Yes, the phone is running normal, no crash and stuff like that.
the phone dont have a MicroSD when i install CWM and i dont have an SD, dnt know if this is the problem.
can someone help me? why i have this error when i go to CWM? what can i do?
Thanks to all that read this post.