This is a new problem for me....first I've ever had with ROMS/recovery.
I wiped and flashed Celb 4 over 3.9 and decided I wanted to go back to 3.9.
I did another wipe and reinstalled 3.9, but the wipe never "took" because it didn't go through the normal wizard...just booted right up into 3.9.
I'm missing some apps in 3.9 as well. I then tried to wipe and flash 4, and same thing....no wizard.
Any ideas?
Also, a note....I wiped and flashed KaosFROYO and got the wizard, but no matter how many times I wipe now, I can't get Celb to wipe.
So maybe a CELB issue?
Forget it, I'm an idiot!
Flashed gapps....now it's fine.
i can't get gingerbread to install
i am using cwm v2.5.1.1-bekit-0.8, cleared data, cache, dalvik cache, etc. flash rom, flash gapps, reboot and it hangs at the viewsonic screen. can flash froyo roms with no problem but none of the GB roms will boot. what am i missing? thanks in advance
Any ideas? This is driving me crazy.
Try NVFlash. I was suggested that in this post :http://forum.xda-developers.com/showthread.php?t=1028289
I did it, then my CM ROM installed just perfect the first time!
thank you so much never would have thought to try that but it worked
ok i attempted to install BAMF Remix v1.6. is there a way to confirm that this was flashed properly? i still have bloatware like blockbuster etc. i think i missed something along the way.
is it possible i just did a factory reset?
thanks
markkal123 said:
ok i attempted to install BAMF Remix v1.6. is there a way to confirm that this was flashed properly? i still have bloatware like blockbuster etc. i think i missed something along the way.
is it possible i just did a factory reset?
thanks
Click to expand...
Click to collapse
How did you flash it? Did you do it through ROM Manager? Did you wipe data and cache? Something's not quite right, the bloatware should be gone.
i am having the same issue. are you also missing stuff like the notification power control widget?
io flashed mine from cwm and wiped everything.
phatjames167 said:
i am having the same issue. are you also missing stuff like the notification power control widget?
io flashed mine from cwm and wiped everything.
Click to expand...
Click to collapse
Hmm. Count me in on this one too then: http://forum.xda-developers.com/showthread.php?t=1069980
count me in as part of the galactically stupid. (worse than nube)
go to here http://forum.xda-developers.com/showthread.php?t=1027804
download and install
BAMF Remix v1.6:http://tinyurl.com/3wkpmh3
MD5: CF461768DBC8A729CB7D28B97D5B8717
download and install
BAMF Remix Patch 1.6.2: http://tinyurl.com/3ntawj6
MD5: d45d597d42d40ca31319786cfb9450dc
i was only installing BAMF Remix Patch 1.6.2 not realinzing it is only a patch to BAMF Remix v1.6!!!
i booted into ClockworkMod
everything now appears to be as expected for the ROM
thanks for your help.
it looks like this worked. when it first boots though the wallpaper is black with a red streak but then changes to the default wallpaper from stock. is that normal?
That got me closer to everything being 100%. I installed Remix 1.6 and 1.6.2 and I noticed changes like the battery indicator and the market being black (very nice, btw), but I still have bloat & the notification bar is missing. Wiped Dalvic Cache both times, wiped data fully when I installed the main BAMF 1.6 at the start of this.
aerojad said:
That got me closer to everything being 100%. I installed Remix 1.6 and 1.6.2 and I noticed changes like the battery indicator and the market being black (very nice, btw), but I still have bloat & the notification bar is missing. Wiped Dalvic Cache both times, wiped data fully when I installed the main BAMF 1.6 at the start of this.
Click to expand...
Click to collapse
I had this same exact issue. The cause of mine was installing through ROM Manager. I was wiping everything that should be just like you are it sounds. The fix I found was rebooting into recovery and flashing manually. There is an option in ROM manager to reboot into recovery. Once you are into recover wipe data/cache three times. Wipe cache partition three times. Wipe Davlik Cache(Under advanced menu) three times. I usually wipe three just to be sure everything is clean before I flash. Flash 1.6. Now load 1.6.3(since it's out now) onto the SD card. Boot into recovery again, wipe cache partion and davlik cache three times. Install 1.6.3.
devindpotts said:
I had this same exact issue. The cause of mine was installing through ROM Manager. I was wiping everything that should be just like you are it sounds. The fix I found was rebooting into recovery and flashing manually. There is an option in ROM manager to reboot into recovery. Once you are into recover wipe data/cache three times. Wipe cache partition three times. Wipe Davlik Cache(Under advanced menu) three times. I usually wipe three just to be sure everything is clean before I flash. Flash 1.6. Now load 1.6.3(since it's out now) onto the SD card. Boot into recovery again, wipe cache partion and davlik cache three times. Install 1.6.3.
Click to expand...
Click to collapse
I did the install through the ROM manager, so I'm hoping your solution works out. I'll give it a try this evening. Thanks for the suggestion!
aerojad said:
I did the install through the ROM manager, so I'm hoping your solution works out. I'll give it a try this evening. Thanks for the suggestion!
Click to expand...
Click to collapse
Actually I just looked and 1.6.3 is an entire rom instead of a patch so you can skip flashing 1.6. And just flash 1.6.3 after wiping data/cache/davlik cache.
devindpotts said:
Actually I just looked and 1.6.3 is an entire rom instead of a patch so you can skip flashing 1.6. And just flash 1.6.3 after wiping data/cache/davlik cache.
Click to expand...
Click to collapse
Thank you very much, your suggestions were exactly what I was looking for. Now have that full BAMF Remix experience
aerojad said:
Thank you very much, your suggestions were exactly what I was looking for. Now have that full BAMF Remix experience
Click to expand...
Click to collapse
Not a problem at all, enjoy.
devindpotts said:
I had this same exact issue. The cause of mine was installing through ROM Manager. I was wiping everything that should be just like you are it sounds. The fix I found was rebooting into recovery and flashing manually. There is an option in ROM manager to reboot into recovery. Once you are into recover wipe data/cache three times. Wipe cache partition three times. Wipe Davlik Cache(Under advanced menu) three times. I usually wipe three just to be sure everything is clean before I flash. Flash 1.6. Now load 1.6.3(since it's out now) onto the SD card. Boot into recovery again, wipe cache partion and davlik cache three times. Install 1.6.3.
Click to expand...
Click to collapse
I had the same issue and this worked for me. I just reflashed 1.6.3 directly from CWR (after wiping everything 3x) and everything worked correctly (notification widget, etc.)
thanks for the help
I am glad I found this, I had this same issue and it was driving me nuts. I'm reinstalling now and hopefully everything just comes out perfect.
I am adding this to my list of why I don't like RM.
Hi there.
I have problem with all ROMs. I used CyaNoComb v1.1. In CWM i tap fix permissions. When it get finished I reboot the phone, type the PIN and than... I openned some app and than error, I tried other app and than error too. I wiped data, patrition chache, dalvik cache, battery stats. Than I tried to install ROM(FroyoComb v1.6) and the phone several times stuck at bootanimation. Animation freezes and I can do nothing. I rebooted the phone, tried to go to Android but I can't. I several times tried to install ROM(few roms) but it do the same. Than i restored SE stock 2.1 from my backup and it works normally... Than i tried to do clean install of any rom but nothing changed. I restord from my backup and i want to update from SEUS but when I hold back and connected phone to PC it says:Failed to detect product. The product could not be identified. Please disconnect and try it again.
I tried several times but nothing changed. Please help, what should i do?
Can anyone upload his backup from clean install FroyoComb or other rom? THANKS
Are you aware that installing froyocomb 1.6 and slades - umm help me - 'slades' 6.0 as clean install (wipe user data) does not work as expected?
People who waited report, they waited about 1-2 hours until it finished.
This is a known bug and will be fixed soon.
So try prvious versions or better the CyaNo editions - this should work.
Maybe fixing permissions is no good idea in this roms. Use your backups to have a running systems - if you haven't any backup: why the hell not?
sent with my mini pro
I have backup only from Stock ROM... Going to try older versions...
edit: What a HELL?! Slade's better than Sonny Ericsson. CyaNo v1.3 booted perfectly. But I still prefer CyanoComb or FroyoComb
There is currently a problem with Froyocomb 1.6 and slades rom V6.... You cant just clean or fresh install them.... You should read the comments my friend lol but here is how u wud install froyocomb 1.6
From ure stock install root and xrecovery then wipe dalvik cache and factory reset wipe everything necessary then install froyocomb 1.5 .... Boot it once play around for a minute or two log in ure google account and then go back into xrecovery, wat u will notice is that it becomes orange and this is clockwork mod recovery better than xrec its still the same dnt worry.... NOW WHAT U DO IS .... Without deleting anything, install froyocomb 1.6... It shud work coz thats how mine did hope it helps if not please ask
..::XDA RocK::..
So ive never had a problem installing Opera Mini until tonight when I flashed the latest ICScrewD. It will install from Market but when I install on device the progress bar gets to about 25% and just stops. Ive cleared cache, dalvik, wipe data/factory reset, switched Kernels. No dice. Any ideas what could be causing this?