Hi!
I'm having issues to use 3G on my phone! I read something about some people playing with RADIO.
I'm using this rom:
Branding: Retail Brasil
Version: 0.50.0 Full
Android Version: 2.2.2
Bootloader Version: N/A
Webtop version: 6.69.0
Wich RADIO can i flash to solve 3G issues?
Which carrier?
Sent from my MB860 using XDA Premium App
VIVO
I've tryed to configure with APN BRASIL, but don't work!
Filipeknot said:
VIVO
I've tryed to configure with APN BRASIL, but don't work!
Click to expand...
Click to collapse
Ok, now I see it's vivo (I replied from XDA app, so I didn't see your info )
You can't connect? I'm vivo too and configured with apn brasil, it should work. Maybe you've got a faulty unit.
Here is my apn:
apn: zap.vivo.com.br
username: vivo
password: vivo
mcc: 724
mnc: 11
apn type: default,supl
This last config I manually added "supl", it looks like it improved performance, but it works without it.
Cheers
This time, when i change some APN and SAVE, it dissapear!
But i think that is a RADIO problem!
Filipeknot said:
This time, when i change some APN and SAVE, it dissapear!
But i think that is a RADIO problem!
Click to expand...
Click to collapse
It's because you've set the wrong MCC and MNC for your network... but remember, APN Brasil should work fine. If not, I would say something is fishy there, maybe the simcard or the phone itself...
The problem is my telephonic line! I'm talked with my carrier! =/
Thx tsouza!
Related
Deleted for obvious reasons
Hey I would help you out I have an att x10 but I cannot find that menu
Deleted for obvious reasons
ok got it but i dont think it would be safe for me to post all that info sorry
and plus i am running software version 54
Why do you need this info...
Sent from my X10i using XDA App
Deleted for obvious reasons
Deleted for obvious reasons
take it to an att store
Here's the non-sensitive stuff. You're on your own with sim serial and the others. They would be different from our phones anyway...
You may want to remove your imei from this thread too...
Phone Type: GSM
IMEI:
Software Version:
Phone Number:
Network Country Code: us
Network Operator Name: AT&T
Network Operator Code: 310410
Network Type: Unknown
Roaming State: Not roaming
SIM Country Code: us
SIM Operator Name: (leave blank)
SIM Operator Code: 310410
SIM Serial Number:
SIM State: Ready
IMSI:
Mobile Country Code: 310
Mobile Network Code: 410
Voice Mail Number:
Voice Mail Alpha Tag: Voicemail
*Edit - Did you remove or damage your sim or try to carrier unlock?
Sent from my X10a using XDA App
Have u tried searching for a network manually on the phone under the wireless settings menu? That may work
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
After having my T-Mobile Optimus-T running the latest 10s OS hang and not reboot after updating a few apps I decided to install the unbranded 20G firmware to make the jump to Gingerbread. I like a lot of others found the fastdormancy bug and battery life went out the door. After trying to update the flex.db to get this to work I compared the flex.db from the 10S firmware (set up a kitchen, extracted and used a sqlite viewer) and found that it is substantially smaller as it only contains the T-Mobile info. So I backed up the originals and replaced both the flex.db and flex.xml files with the froyo T-Mobile versions. The good news is that this fixed the fastdormancy (I think) but made the LG Home launcher only show 2 shortcuts rather than the 4 that were there after the update to 20G. It seems that this is something that is defined based on provider as I could not find anything in the flex.db that would relate to the number of shortcuts. I would like to find where this can be changed and would appreciate any information related to the the actual shortcuts and the number of them for LG Home.
And please do not make this a thread about alternate launchers, I've tried a few an while this may be an option, it is not just yet.
The P500 and P509 have different data bands. GSM is identical but 2/3g is different. I wouldn't recommended that you use an Official 2.3.3 GB rom on your P509.
Wait for TMO to officially provide a new baseband (don't hold your breathe) or use miks or andys GB roms which work on the old baseband.
Turducken said:
The P500 and P509 have different data bands. GSM is identical but 2/3g is different. I wouldn't recommended that you use an Official 2.3.3 GB rom on your P509.
Wait for TMO to officially provide a new baseband (don't hold your breathe) or use miks or andys GB roms which work on the old baseband.
Click to expand...
Click to collapse
just out of curiosity. lets say i flash the new baseband on my optimus t. how would i go about getting the old baseband for the optimus t? sorry if the answer is lying about somewhere...i cant seem to find it
sweetnsour said:
just out of curiosity. lets say i flash the new baseband on my optimus t. how would i go about getting the old baseband for the optimus t? sorry if the answer is lying about somewhere...i cant seem to find it
Click to expand...
Click to collapse
Download the V10S kdz and extract using DZDecrypt.exe. There you'll find the baseband files. Follow doktornotors guide to flash it but replace the files from his guide with the ones you extracted.
TMO P509 V10S kdz
Turducken said:
The P500 and P509 have different data bands. GSM is identical but 2/3g is different. I wouldn't recommended that you use an Official 2.3.3 GB rom on your P509.
Wait for TMO to officially provide a new baseband (don't hold your breathe) or use miks or andys GB roms which work on the old baseband.
Click to expand...
Click to collapse
I am curious what the pitfalls might be, it seems that I'm having no issues with 3G currently and my speeds are comparable to what I was getting with 10S. And I flashed out of knowing that there is not likely going to be a gingerbread release for the 509. I must say that it seems smoother, and there was next to no bloatware on the unbranded firmware.
zPacKRat said:
I am curious what the pitfalls might be, it seems that I'm having no issues with 3G currently and my speeds are comparable to what I was getting with 10S. And I flashed out of knowing that there is not likely going to be a gingerbread release for the 509. I must say that it seems smoother, and there was next to no bloatware on the unbranded firmware.
Click to expand...
Click to collapse
The way I understand it is that there are two data frequencies. One we share with the P500 and one is unique. It's likely that you're connected to the one that is shared.
As for consequences with regards to harming the hardware, I don't know.
**EDIT**
IMO using a P500 2.2.2 unbranded rom would be the safe bet.
help i have no data
so yeah i've been using miks cm7 on my Optimus T for a while now but i just came across the V20E_00 update and gave it a try, after much tinkering and many problem i finally got it to boot, but now i have no data whatsoever short of wifi. so i was wondering if someone could tell me exactly what i need to do to fix this. im completely new to basebands, like brand new haha. i was on V10L_00 stock previously before moving to miks cm7, not quit sure if that helps. please let me know something fast as possible, much thanks to all who help.
ShawnnKushh said:
so yeah i've been using miks cm7 on my Optimus T for a while now but i just came across the V20E_00 update and gave it a try, after much tinkering and many problem i finally got it to boot, but now i have no data whatsoever short of wifi. so i was wondering if someone could tell me exactly what i need to do to fix this. im completely new to basebands, like brand new haha. i was on V10L_00 stock previously before moving to miks cm7, not quit sure if that helps. please let me know something fast as possible, much thanks to all who help.
Click to expand...
Click to collapse
Try setting your APN
omg thanks
terratrix said:
Try setting your APN
Click to expand...
Click to collapse
wow your such a lifesaver, ive been fiddling with this for hours on hours and that never even occurred to me, after some googling i came across the correct settings which ill post here incase anyone else has this problem. once again much thanks, when in serious need, visit xda! =D with this my 2.3.3 rom works completely on my Optimus T P509
Correct APN settings:
Name: Whatever you want to call it
APN: epc.tmobile.com
The rests are blank (not set) until you get to MMSC.
MMSC: http : // mms. msg. eng. t-mobile. com/ mms/ wapenc (remove the spaces)
MMS proxy & port are <not set>
MCC: 310
MNC: 260
APN type: <not set>
ShawnnKushh said:
wow your such a lifesaver, ive been fiddling with this for hours on hours and that never even occurred to me, after some googling i came across the correct settings which ill post here incase anyone else has this problem. once again much thanks, when in serious need, visit xda! =D with this my 2.3.3 rom works completely on my Optimus T P509
Correct APN settings:
Name: Whatever you want to call it
APN: epc.tmobile.com
The rests are blank (not set) until you get to MMSC.
MMSC: http : // mms. msg. eng. t-mobile. com/ mms/ wapenc (remove the spaces)
MMS proxy & port are <not set>
MCC: 310
MNC: 260
APN type: <not set>
Click to expand...
Click to collapse
Keep an eye out for issues where when you answer the phone it drops the call, I went back to 10s rooted and cleaned of bloat, and to say my battery life improved after a full charge and deletion of the battery stats is an understatement.
RE
so is v10s the baseband or the system firmware? because on the p509 ive always used the v10L_00 2.2 firmware with no updates availible.
also with tmobile 2.2 the phone shipped with, i already had problems with calls being dropped as soon as i answered them, as well as when i dialed out it would get stuck sometimes dialing.
ShawnnKushh said:
so is v10s the baseband or the system firmware? because on the p509 ive always used the v10L_00 2.2 firmware with no updates availible.
also with tmobile 2.2 the phone shipped with, i already had problems with calls being dropped as soon as i answered them, as well as when i dialed out it would get stuck sometimes dialing.
Click to expand...
Click to collapse
That is the firmware version, 10l and 10s used the same baseband. you can use kdz updater to install the rom, however this is a wipe not an upgrade so you will have to backup any important data first.
Here is the link to a link for the file, http://forum.xda-developers.com/showpost.php?p=19292603&postcount=45
kdz
yeah okay cool, kdz updater is how i got to v20E, an official update hasnt been pushed to the p509 yet
thanks anyways, do u know if i could use a custom kernel on a factory rom??
Hi, My name is Masaki, I'm from Peru, I have a problem with my Xperia X10a, my phone was operator locked (I buy it from my friend, he uses this phone with movistar operator but I have a line with another operator called claro.
My friend say he can unlock the operator lock, for this, he use a program called medusa box, after a few minutes he finally can unlock the phone, but, now, the phone only can connect to edge band, the 3G don't work anymore, somebody can help me?
Masaki
PS:
All work ok in the phone, I tried original rom (android 2.1), updated rom (2.3.3) custom rom... custom kernel, with no result...
when I choose "only WCDMA mode", I lost the singal (phone and data) and a error appear (no operator found), only work when I use "GSM only" or "prefered WCDMA to GSM" (but work in GSM/edge mode only)
the local operator (both) are X10a band compatible
Did you try relocking the phone ?
Maybe a bad unlock procedure.
Sent from my X10i using XDA
weird problem
can't lock again with that soft.
You can try this. I found that in some roms it is more easy to change than in others. Miui roms seem to have more settings to change than stock based roms.
1. Claro Puerto Rico Manual APN Settings for Android:
Go to Menu -> Settings -> Wireless & networks-> Mobile networks -> Access Point Names -> New APN and key the following
Name : Claro Internet
APN : internet.claropr.com / for mms/ mms.claropr.com
Proxy : 10.50.38.3
Port : 8080
Username : < Not Set >
Password : < Not Set >
Server : < Not Set >
MMSC : http://mmsg.claropr.com:1021/mmsc
MMS Proxy : 10.50.38.3
MMS Port : 8799
MCC : 330
MNC : 110
Authentication type : < Not Set >
APN Type : < Not Set >
2. Claro Puerto Rico Manual APN Settings for Android
Go to Settings-> General Settings-> Network->Turn ON Cellular Data
Select Cellular Network -> APN and key the following details
Cellular Data:
APN: internet.claropr.com
Username: Blank
Password: Blank
MMS:
APN: mms.claropr.com
Username: blank
Password: blank
MMSC: http://mmsg.claropr.com:1021/mmsc
MMS Proxy: 10.50.38.3:8799
MMS Message Size: default
MMS UA Prof URL: default
masakisan said:
Hi, My name is Masaki, I'm from Peru, I have a problem with my Xperia X10a, my phone was operator locked (I buy it from my friend, he uses this phone with movistar operator but I have a line with another operator called claro.
My friend say he can unlock the operator lock, for this, he use a program called medusa box, after a few minutes he finally can unlock the phone, but, now, the phone only can connect to edge band, the 3G don't work anymore, somebody can help me?
Masaki
PS:
All work ok in the phone, I tried original rom (android 2.1), updated rom (2.3.3) custom rom... custom kernel, with no result...
when I choose "only WCDMA mode", I lost the singal (phone and data) and a error appear (no operator found), only work when I use "GSM only" or "prefered WCDMA to GSM" (but work in GSM/edge mode only)
the local operator (both) are X10a band compatible
Click to expand...
Click to collapse
Since Claro doesn't use 2100 MHz band you will have Edge only. Or switch to carrier with 2100 band for 3G.
tal333
Phone: Sony Ericsson Xperia X10i @1.036GHz- White
Android version: 2.3.7
Kernel: 2.6.29-FXP
Radio: 2.1.71
Recovery: CWM- v5.0.2.8
Rom: FXP-CM7#112 CyanogenMod-7.2.0-RC0-es209ra-KANG
Theme: Honeycomb3D-3Dicons by BKMO
about claro
The claro operator in peru work in 850, and movidtar in 1900, i cant connect in booth cases
masakisan said:
The claro operator in peru work in 850, and movidtar in 1900, i cant connect in booth cases
Click to expand...
Click to collapse
Well, if 850 and 1900 are what is supported in your Country, and both 850 and 1900 are not available in the X10i, it probably would be best for you to sell the X10i and buy an X10a.
tal333
Phone: Sony Ericsson Xperia X10i @1.036GHz- White
Android version: 2.3.7
Kernel: 2.6.29-FXP
Radio: 2.1.71
Recovery: CWM- v5.0.2.8
Rom: FXP-CM7#112 CyanogenMod-7.2.0-RC0-es209ra-KANG
Theme: Honeycomb3D-3Dicons by BKMO
abiut phone
my phone is X10a, the phone work in 3G before the unlock (medusa box sim operator unlock) but after the unlock the wcdma mode don't work anymore
Masaki
service menu report...
today I checked the service menu, I found the follow info, maybe this can be useful to find an answer...
SIMLOCK
Network 5
Network subset 5
Service provider 5
Corporate 5
SIM 0
Configuration:
IMEI: 3594.......
Imei soft version 71
avaiable speech codec: HR FR EFR AMR_HR AMR_FR
Working band: GSM850 - GSM900 - GSM1800 - GSM1900 - UMTS_BC1 - UMTS_BC4 - UMTS_BC8
masakisan said:
my phone is X10a, the phone work in 3G before the unlock (medusa box sim operator unlock) but after the unlock the wcdma mode don't work anymore
Masaki
Click to expand...
Click to collapse
Since your OP stated it was an X10i, that would have been the problem with no hspa. I am not sure but perhaps restoring to original 2.3.3 and baseband following the link below exactly might get your hspa working. Good luck.
tal333
http://forum.xda-developers.com/showthread.php?t=1192152&highlight=doomlord+recovery
x10a
My phone is a x10a model from the start, I tried the original rom from local claro (android 1.6 and android 2.1) I tried the SE generic version update (android 2.3.3) custom roms + Kernel: doom kernel 1133 + Xperia S ported to X10 from chickensito (Android 2.3.7)
The problem still remain
I tried to set the apn manually... no result
Masaki
Tried x10i bands maybe your unlock changed your phone into a x10i what is your baseband I am just speculating
Sent from my X10i using XDA
about baseband
my actual spec are...
baseband: 2.1.71
kernel 2.6.29 modfxpdoomkernel
androis 2.3.7
X10i band are not compatible with Peru operator
xperia x10 no 3g
nobody can help me?
masakisan said:
nobody can help me?
Click to expand...
Click to collapse
people have helped you and you need to find a new carrier as the one you have dose not support the radio frequencies of the x10a try to trade sell it and buy a x10i or get a carrier that supports the radio of the phone you have.
x10a
My local carrier (both) work with Xperia X10a, X10i don't work here.
try if you can get a band on another carrier preferably does have the the
2100mhz band just to confirm that your radio is working
Sent from my X10i using XDA
Found a solution yet?? I have a similar problem with my X10a.
I'm with Telcel in México, simlocked (i got my cellphone from Telcel), but the radio signal is not working, tried with another sim card and got the same result...
carrier
there is only 2 carrier in my country, and don't work with 2100 freq
No, my problem is not solved. any ideas?
tried reflashing x10a baseband? any errors when forcing 3g mode? e.g can't enable radio etc.... ?
Sent from my X10i using XDA
I was purchased a Samsung Glaxy S5(made In korea) ,i am from India
My problem in that phone the SiM detected but cant cal /message etc .
It telling that the network is not available , I think this phone was Unlocked ,But the region carrier Locked .
Anybody help me to this phone with Indian Sim
Thanks in advanec
I am using Verizon S5 model on T-mobile. I had to make a new APN with the settings that follow. Leave all the others blank. IPv6 does not seem to work for me.
Name: T-Mob (can be anything)
APN : fast.t-mobile.com
Server: http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC: 310
MNC: 260
APN Type: default,admin,supl,mms,hipri,dun
APN protocol: IPv4
APN roaming protocol: IPv4
thannara123 said:
I was purchased a Samsung Glaxy S5(made In korea) ,i am from India
My problem in that phone the SiM detected but cant cal /message etc .
It telling that the network is not available , I think this phone was Unlocked ,But the region carrier Locked .
Anybody help me to this phone with Indian Sim
Thanks in advanec
Click to expand...
Click to collapse
I mean that .i cant call, message etc from that mobile.
The sim cannot be registre
thannara123 said:
I was purchased a Samsung Glaxy S5(made In korea) ,i am from India
My problem in that phone the SiM detected but cant cal /message etc .
It telling that the network is not available , I think this phone was Unlocked ,But the region carrier Locked .
Anybody help me to this phone with Indian Sim
Thanks in advanec
Click to expand...
Click to collapse
This is the T-Mobile forum. For the G900T. I think you probably need to be in the International Version G900F threads.
Hello,
I have a verizon galaxy S4 and I am currently running Jelly Beans Android 4.2.2.
The baseband is VRUAMDK
The build number is VRUAME7
I have not used this phone since 2015 so I forgot what I did back then and I also forgot if I unlocked the bootloader or not lol
I am confused because I have CWM recovery installed.
What I would like to know is the following:
1. How can I check to see if the bootloader is indeed unlocked?
2. Since it is a Verizon phone, when I put in an AT&T SIM card I get network access and I get H+ data. Is there a way to get 4G LTE since the phone is 4G LTE capable?
3. I used to have an HTC One M9 and I remember I flashed a Dev ROM on it and I was able to flash any variant rom like AT&T, T-mobile, Global or International...etc Is this also possible on the S4 assuming the bootloader is unlocked?
4. Given the above info, is it safe to flash any other custom roms without loosing the unlocked bootloader? ( from my research, I understand that the bootloader of MDK baseband can be unloacked).
Thanks in advance...
fidzi_1981 said:
Hello,
I have a verizon galaxy S4 and I am currently running Jelly Beans Android 4.2.2.
The baseband is VRUAMDK
The build number is VRUAME7
I have not used this phone since 2015 so I forgot what I did back then and I also forgot if I unlocked the bootloader or not lol
I am confused because I have CWM recovery installed.
What I would like to know is the following:
1. How can I check to see if the bootloader is indeed unlocked?
2. Since it is a Verizon phone, when I put in an AT&T SIM card I get network access and I get H+ data. Is there a way to get 4G LTE since the phone is 4G LTE capable?
3. I used to have an HTC One M9 and I remember I flashed a Dev ROM on it and I was able to flash any variant rom like AT&T, T-mobile, Global or International...etc Is this also possible on the S4 assuming the bootloader is unlocked?
4. Given the above info, is it safe to flash any other custom roms without loosing the unlocked bootloader? ( from my research, I understand that the bootloader of MDK baseband can be unloacked).
Thanks in advance...
Click to expand...
Click to collapse
1. Your bootloader is NOT unlocked, however since you have CWM recovery installed, it seems your phone has taken advantage of the loki doki exploit which the MDK firmware allows. No other firmware will allow a custom recovery so NEVER update your phone off the MDK bootloader.
2. To use the phone on AT&T, all you need is the APN settings to get 4G LTE.
3. Again the bootloader is NOT unlocked, it's just by passing the lock with the loki doki exploit. And no you can only use ROMs made for your phone whether it be TW based ROMs of AOSP like Cyanogen Mod.
4. Yes, you can flash any ROM made for your phone and loki doki will not be lost. No the MDK bootloader cannot be unlocked, but it can be by passed with loki doki.
I have the same set up on my phone here (Android 4.2.2 but running a lollipop ROM with CWM recovery) only mine is the AT&T variant on the MDL bootloader which is the AT&T version of the MDK bootloader on your phone. It can be exploited with loki doki too.
StoneyJSG said:
1. Your bootloader is NOT unlocked, however since you have CWM recovery installed, it seems your phone has taken advantage of the loki doki exploit which the MDK firmware allows. No other firmware will allow a custom recovery so NEVER update your phone off the MDK bootloader.
2. To use the phone on AT&T, all you need is Verizon APN settings to get 4G LTE.
3. Again the bootloader is NOT unlocked, it's just by passing the lock with the loki doki exploit. And no you can only use ROMs made for your phone whether it be TW based ROMs of AOSP like Cyanogen Mod.
4. Yes, you can flash any ROM made for your phone and loki doki will not be lost. No the MDK bootloader cannot be unlocked, but it can be by passed with loki doki.
I have the same set up on my phone here (Android 4.2.2 but running a lollipop ROM with CWM recovery) only mine is the AT&T variant on the MDL bootloader which is the AT&T version of the MDK bootloader on your phone. It can be exploited with loki doki too.
Click to expand...
Click to collapse
Thank you Stoney for the detailed response. This was very helpful and refreshing.
Can you please give me a name or two of the ROMS that can be flashed on MDK without issues. I am using Lineage OS on my OnePlus without google play or google services and this is what I am trying to do on the S4 as well. I want to keep the MDK version and install a rom without any google services or Verizon bloatware.
Thanks again in advance
fidzi_1981 said:
Thank you Stoney for the detailed response. This was very helpful and refreshing.
Can you please give me a name or two of the ROMS that can be flashed on MDK without issues. I am using Lineage OS on my OnePlus without google play or google services and this is what I am trying to do on the S4 as well. I want to keep the MDK version and install a rom without any google services or Verizon bloatware.
Thanks again in advance
Click to expand...
Click to collapse
No problem glad to help. I'm pretty sure you can flash any AOSP or TW based ROM that you want as long as it's for your phone. There's a lineage OS ROM for my phone, so there might be one for yours just look in the original android development section found here on the forum.
I do have a Verizon s4 as well, but it's been updated passed MDK thanks to the guy that owned it before me so my bootloader is locked. However, I can boot custom TW ROMs, just no AOSP based ones. I'm running stang5litre Note 5 ROM on it. As for my at&t phone here that can use loki doki, I also run a custom TW ROM on it.
StoneyJSG said:
1. Your bootloader is NOT unlocked, however since you have CWM recovery installed, it seems your phone has taken advantage of the loki doki exploit which the MDK firmware allows. No other firmware will allow a custom recovery so NEVER update your phone off the MDK bootloader.
2. To use the phone on AT&T, all you need is Verizon APN settings to get 4G LTE.
3. Again the bootloader is NOT unlocked, it's just by passing the lock with the loki doki exploit. And no you can only use ROMs made for your phone whether it be TW based ROMs of AOSP like Cyanogen Mod.
4. Yes, you can flash any ROM made for your phone and loki doki will not be lost. No the MDK bootloader cannot be unlocked, but it can be by passed with loki doki.
I have the same set up on my phone here (Android 4.2.2 but running a lollipop ROM with CWM recovery) only mine is the AT&T variant on the MDL bootloader which is the AT&T version of the MDK bootloader on your phone. It can be exploited with loki doki too.
Click to expand...
Click to collapse
StoneyJSG said:
No problem glad to help. I'm pretty sure you can flash any AOSP or TW based ROM that you want as long as it's for your phone. There's a lineage OS ROM for my phone, so there might be one for yours just look in the original android development section found here on the forum.
I do have a Verizon s4 as well, but it's been updated passed MDK thanks to the guy that owned it before me so my bootloader is locked. However, I can boot custom TW ROMs, just no AOSP based ones. I'm running stang5litre Note 5 ROM on it. As for my at&t phone here that can use loki doki, I also run a custom TW ROM on it.
Click to expand...
Click to collapse
Got it. I will probably flash any KitKat AOSP or CM rom because I want to stay on Jelly bean or KitKat and maybe Lollipop but not higher. Thanks again. I appreciate your help.
fidzi_1981 said:
Got it. I will probably flash any KitKat AOSP or CM rom because I want to stay on Jelly bean or KitKat and maybe Lollipop but not higher. Thanks again. I appreciate your help.
Click to expand...
Click to collapse
Do you know if there is a trick to plugging in Verizon APN setting when I have my at&t sim card inserted ?
My network settings are as follows:
Mobile data is enabled
Global data roaming is disabled
Network Mode is set to GSM/UMTS
The default Verizon APN setting is greyed out and I can not select it or edit it. If I manually add another APN setting that has verizon settings and I save it it does not show up in the list of APN settings. It just disappears the moment I save it.
any thoughts?
Thanks
StoneyJSG said:
No problem glad to help. I'm pretty sure you can flash any AOSP or TW based ROM that you want as long as it's for your phone. There's a lineage OS ROM for my phone, so there might be one for yours just look in the original android development section found here on the forum.
I do have a Verizon s4 as well, but it's been updated passed MDK thanks to the guy that owned it before me so my bootloader is locked. However, I can boot custom TW ROMs, just no AOSP based ones. I'm running stang5litre Note 5 ROM on it. As for my at&t phone here that can use loki doki, I also run a custom TW ROM on it.
Click to expand...
Click to collapse
Do you know if there is a trick to plugging in Verizon APN setting when I have my at&t sim card inserted ?
My network settings are as follows:
Mobile data is enabled
Global data roaming is disabled
Network Mode is set to GSM/UMTS
The default Verizon APN setting is greyed out and I can not select it or edit it. If I manually add another APN setting that has verizon settings and I save it it does not show up in the list of APN settings. It just disappears the moment I save it.
any thoughts?
Thanks
fidzi_1981 said:
Do you know if there is a trick to plugging in Verizon APN setting when I have my at&t sim card inserted ?
My network settings are as follows:
Mobile data is enabled
Global data roaming is disabled
Network Mode is set to GSM/UMTS
The default Verizon APN setting is greyed out and I can not select it or edit it. If I manually add another APN setting that has verizon settings and I save it it does not show up in the list of APN settings. It just disappears the moment I save it.
any thoughts?
Thanks
Click to expand...
Click to collapse
If you're using the Verizon phone with an AT&T SIM card, then for 4G LTE data to work you need AT&T APN settings which are:
Name: ATT HSPA+
APN: phone
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms,hipri
APN Protocol: Leave it to the Default one
Bearer: Leave it to the Default one
And sticking to kit kat is probably a good idea. There's a google play edition ROM that's suppose to be good. I'm running lollipop on my AT&T loki doki S4 here and it's alright, though it has some bugs since it's a custom touch wiz ROM. I haven't tried running any AOSP Android 7, 8, or 9 ROMs.
StoneyJSG said:
If you're using the Verizon phone with an AT&T SIM card, then for 4G LTE data to work you need AT&T APN settings which are:
Name: ATT HSPA+
APN: phone
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms,hipri
APN Protocol: Leave it to the Default one
Bearer: Leave it to the Default one
And sticking to kit kat is probably a good idea. There's a google play edition ROM that's suppose to be good. I'm running lollipop on my AT&T loki doki S4 here and it's alright, though it has some bugs since it's a custom touch wiz ROM. I haven't tried running any AOSP Android 7, 8, or 9 ROMs.
Click to expand...
Click to collapse
Thanks again!